Tow read receipt received for one email

I was installed exchange 2013 in stead of 2003 few days ago from that time Iam facing problem with the read receipt
one is generated from the server and the other upon client request for read report the means anyone send us email he received tow read messages for the email the first is onbehalf the receipt and the other upon the sender request for examaple
from: musheer sheikhali <[email protected]>; on
behalf of; musheer sheikhali
from: musheer sheikhali <[email protected]>;
these are 2 read receipt for the same email

I was installed exchange 2013 in stead of 2003 few days ago from that time Iam facing problem with the read receipt
one is generated from the server and the other upon client request for read report the means anyone send us email he received tow read messages for the email the first is onbehalf the receipt and the other upon the sender request
for examaple
read:Test
from: musheer sheikhali <[email protected]>; on
behalf of; musheer sheikhali
read:Test
from: musheer sheikhali <[email protected]>;
these are 2 read receipt for the same email PLZ note the on behalf of this is my problem how can i prevent this read receipt which include
on behalf of

Similar Messages

Turning off "Read Receipt" response for EIC email

Hi,
We would like to turn off the email "Read Receipt" indicator to the sender that the receiver had read an email. None of the settings on the EIC Email profile do this. Can anyone advise if there is another setting and where it is?
Thanks very much!
Bill

My guess is your getting an automatic response from the receiving server and then one from the email client when the message is read.
You could also be getting a receipt from their phone and desktop mail clients.

Outlook 2010 Exchange 2010 Read Receipt Request for all emails cannot be switched OFF.

I have a strange situation with an Outlook 2010 client using Exchange 2010. The user has Outlook configured so that Under Options/Mail/Tracking - that "Read receipt confirming the recipient has viewed the message" is turned off. Yet everytime she
sends a message, the option to request pops up on the recipient's outlook.
I have tried to toggle the option on and off to no avail. I can switch the Delivery Receipt request on and off and it is no issue.
Can anyone tell me what attribute in ADSIEdit or Exchange is that seems to be stuck ON?

Hi,
I believe you would like to block this only for the user and not for your ORG... ??
Although, you can block this for your entire ORG.
what happens is that the Read receipt contains a "Disposition-Notification-To"
If we get rid of this header we can restrict the receiver to get that prompt.
we can create a Transport rule either for the entire org or for that specific user by making an adjustment in the "exception tab"
for more info refer this blog.
http://blogs.technet.com/b/exchange/archive/2011/02/23/3412028.aspx
Thanks & Regards
John Chris

"Not Read" receipt received from sender for all emails sent.

We recently migrated from Exchange 2010 to Exchange 2013 and I've got one user that started having a strange problem after the migration. She has Outlook set to request a read receipt for all emails that she sends and that works fine except that
for every email she sends, she gets a "Not Read" receipt back and this not read receipt comes from her as if she sent the email to herself and didn't read it. She also get the not read receipt if she deletes emails that are in her sent box
and again, the not read receipt comes from her.
This user is using Outlook 2007 SP3 with all available updates installed. We've tried a new profile and we've also tried on a different computer with the same results. She doesn't have any rules set up except for the one for clearing categories
that I believe is a default rule. I've checked the settings of the rule and there is nothing there that would be causing this. The other strange thing is that these not read receipts seem to come in batches. If she sends one email the the
not read receipt doesn't show up or at least not immediately. If she sends 2 or 3 messages then she'll get all of the not read receipts for those 2 or 3 messages at the same time.

Hi
Please check this thread
http://social.technet.microsoft.com/Forums/en-US/2dbf0122-8d63-4375-91b4-6ba2cf52ed2e/not-read-receipt-to-senders
Tell the senders to stop sending messages with read receipts and it wont be a problem
And to To determine the problem, Please test the feature on local side to check whether the symptom occurs. Meanwhile, you can let the sender in remote domain send message to other domain to
check the result.
Cheers
Zi Feng
TechNet Community Support

Numerous notifications for one email

When I recieve one single email it alerts me 2 and sometimes 3 times. Why is this? It is kind of annoying. Also, some text messages that I recieve come in 2 and 3 times.. the exact same message. Anyone know why?

Sorry for the confusion everyone.. Let me break it down..
Email
- When receiving one single email, I am being notified 2 to 3 times for that one single email. What I'm saying is my phone chimes 2 to 3 times for one email alone. I have no forwarding set up. Gmail exchange is all I am using. The iCloud account is just there and is not being used.
Text
- Say I recieve one specific text from one person, that one particular text is coming in 2 and 3 times. The same exact text.. usually about an hour apart.
Thanks again for everyones feedback. While I have your attention I have one more issue if you can help. Sometimes when I hit the sleep/wake button to wake my phone the screen will flicker ( go black, then back on again.. maybe multiple times before it acutally stays lit) is this an issue or anything to worry about? This is my first iPhone, so I am new to all of this.
Thanks again!

Regarding Two Account Receivable for One customer

Hi all,
Can I set up two A/R receivable for one customer .For example :
Equipment sales - A/R----
Part sales -
A/R
However,A/R receivable can be set only at business partner level.
Is there any work around .Please suggest me
bishal

HI,
Suda is correct, that it is not possible.
Even if it's possible that a system can split a Sales transaction to multiple receivable accounts, how upon payment? With an accumulated-multiple receivable on one customer's account, the customer will not tell us that this much go to this A/R account and this much go to another A/R Account.
In order to address the multiple A/R requirement of your accountant, try to study the following options
OPTION #1
I would suggest that you create multiple Customer Records in order to provide the multiple A/R Account .
Implement a coding standard on the Customers with multiple A/R Accounts, such as
C10023 - Customer with A/R Equipment
C20023 - Customer with A/R Parts
Since there will be issue on Payment for this option, create a UDF in the Incoming Payment module and assign an FMS with a query displaying the amount due for A/R Equipment and A/R Parts so that payment can be manually splitted between Customer Accounts.
OPTION #2
Maintain the standard of SAP Business One, and focus on the reporting part of the Balance Sheet. You can create your own Balance Sheet report in order to futher split the A/R into 2 or several A/Rs depending on the transactions posted to A/R Invoices.
Hope this help.
Laurence Resubal
Edited by: Laurence Resubal on Jun 19, 2008 10:46 AM

Send As Permission | Works For One Email

I'm trying to grant a few users Send As permission on a mailbox.
In the EMC: I have granted the users Manage Full Access Permission
In ADUC: I have Enabled Advanced Features, added the users to the account and Granted them Send As in the Security properties pages
On the Client side; the users can add the account to the From menu by searching the GAL. They are then able to Send As for one email and any other emails after bounce with the following message:
Delivery has failed to these recipients or groups:
You can't send a message on behalf of this user unless you have permission to do so. Please make sure you're sending on behalf of the correct
sender, or request the necessary permission. If the problem continues, please contact your helpdesk.
Diagnostic information for administrators:
Generating server:
/O=XXXXXXX/OU=EXCHANGE ADMINISTRATIVE GROUP (FYDIBOHF23SPDLT)/CN=RECIPIENTS/CN=Xxxx Xxxxxxxxdb #MSEXCH:MSExchangeIS:/DC=local/DC=XXXXXXXXXX:MB01[578:0x000004DC:0x0000001D]
#EX#
If the user then Deletes the cached address in the From menu, then re-adds it, they can use the Send As for one email again.

Hi,
The Send As permission isn't granted until after replication has occurred. Replication times depend on your Exchange and network configuration. To grant the permission immediately, stop and then restart the Microsoft Exchange Information
Store service.
Since the send as permission can work well in OWA and Outlook online mode, it indicates that the permission has been configured properly in Exchange side. Please recreate a new Outlook profile to have a try. About how to create it, please
refer to:
http://support.microsoft.com/kb/829918b
About manage Send As permission in Exchange, please refer to:
http://technet.microsoft.com/en-us/library/bb676368(v=exchg.141).aspx
Best Regards,
Winnie Liang
TechNet Community Support

Function Module or table to read all EQUI for one KUNNR

Hello,
i need to read all Equipments for one specific KUNNR (endcustomer).
Is there a function module which could be used?
Or what is a good select for this?
Thanks a lot.
Kind regards
Manfred

Hi,
EQBS table will be getting updated based on the Delivery document or while creating equipment for Material & Serial no combination.
How you are maintaining End Customer in your Equipment Master?
You can maintain in Partner Function or Sort Field or through automatic equipment creation.
Based on that, you have to find the logic.
Regards,
Maheswaran.

Tow read receipt for one email

dear all
I was installed exchange 2013 in stead of 2003 few days ago from that time Iam facing problem with the read receipt
one is generated from the server and the other upon client request for read report the means anyone send us email he received tow read messages for the email the first is onbehalf the receipt and the other upon the sender request for exmaple
musheer sheikhali <[email protected]>; on behalf of; musheer sheikhali
musheer sheikhali <[email protected]>;
these are 2 read receipt for the same email

Hi,
May I know how you could tell where the read receipts are generated from? What is your Outlook version?
Sometimes Cached Mode may cause the duplicate read receipts issue, this is because the cached file is corrupted, please run Scanpst.exe to repair the .ost file to test the result:
http://support.microsoft.com/kb/272227/en-us
You may also remove the delegates for this account to try again.
Regards,
Melon Chen
TechNet Community Support

Read Receipts generated for emails sent. ( SOST / SOSG )

Hi,
With the current settings, whenever the email sent is read , "<b>Read Receipt</b>" is sent to the user. Looks like the SOST / SOSG needs to be set accordingly. Could any one has info, how to set this, to avoid this happening.
I could also see, SU01 has parameter SOST.
Thanks,
Sam

There is a setting in SCOT --> confirmation of receipts --> set as receipt not expected.
This will resolve the issue.
Thanks,
Sam

How do you create two apple ids for one email address.

I bought two i pads for my kids. Since we have just one email address, everytime I try to create a new apple id it says I already have one. They need separate ids so their friends can facetime with one and not the other. Can't figure out how to create two apple ids with one email address.

Donnathemom wrote:
Well any ideas on how to solve this problem? When my daughter does facetime with someone it says she's Wyatt. She's not real happy about that.
Get her an email address, even if she never uses it. They're free and available almost everywhere. The only requirement is that the address be a valid one.
Edit...
You can even use an "alias" of yours. That's a fake address that actually sends everything to you. Check with your current email supplier.

How do i attache a read receipt to out ward emails

How do i attach read receipt message to my emails

Unless you know that the recipient's email software supports read receipts (which many don't) and is set to provide them (which many of the rest are not), the most effective way may be to type the text "Please let me know when you receive this message." as part of the message.

Email notification works for one email address fails for another

Hi,
I have OEM 10.2.0.3 - one email address works fine, but another fails with message
[email protected]: Test failed with message: "E-mail Address is invalid: Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay"
Now the weired thing is, that using the same SMTP gateway, I can send emails ok to this address via outlook etc.
Anyone any ideas ? The xxxxxxxxxx in the address is actually a mobile number, but, as I say, it IS valid.
Cheers

Thanks for the reply, however, this is what I dont understand.
The SMTP server is the same one I use for our email, ie, it is our exchange server, and from outlook, I am able to send email
to the same address that is failing with EM. I'm not aware I need any authentication, or how it would need authentication only
for external accounts ?
you are correct howver, that it is an external account, and the same test fails for any external account. I'm just not sure how to fix this ?
A manual session connecting to the SMTP server is as follows
telnet smtp_server_name.com.au 25
Trying 192.168.6.2...
Connected to smtp_server_name.com.au (192.168.6.2).
Escape character is '^]'.
220 smtp_server_name.com.au Microsoft ESMTP MAIL Service ready at Fri, 5 Sep 2008 15:38:00 +1000
helo
250 smtp_server_name.com.au Hello [192.168.6.15]
mail from: [email protected]
250 2.1.0 Sender OK
rcpt to: [email protected]
550 5.7.1 Unable to relay
quit
221 2.0.0 Service closing transmission channel
Connection closed by foreign host.
$

Read receipts in iPhone & iPad email

Is there any way that I can prevent read receipts from being sent out by my iphone? Currently it automatically sends them out.
The issue that I am currently having is that I have read receipts turned off on my desktop computers, so when I read an e-mail on my desktop computers it doesn't get read on my iphone/ipad. After a while it will start sending out "not read" e-mails to the people that sent me the e-mails, even though the e-mails have been read. Just not professional. I would prefer not to have them sent out at all!

Is this happening with all mail accounts on the iPhone or just a certain one. Try deleting and readding the mail account to the iPhone and test.
Post back results or steps you have already tested.

Users sends multiple emails for one email to be received

I have a user who states that she has to send multiple emails to a customer before she one is able to get through. She doesn't receive a bounce back from them. I recently suggested she remove an images from the emails, we have a corporate logo
that can be used in our signatures, as many of her customers are government and I figured they may be blocking the emails for this reason. Nothing seems to have helped and she still seems to be having the issue. This also occurs sometimes for some
of her customers and other times with others, so it doesn't seem specific to the customer. I have repaired Office and run a virus scan, the scan came up with minimal malware and removed it.

Hi,
Please follow these steps to create a test email in Outlook and send out:
1. Open Outlook, click New Email.
2. In the new window, edit To and Subject fields.
3. Click OPTION, check Request a Delivery Receipt.
4. Then click Send to send the test message.
Please check whether the test message is listed in the Sent Items folder or not. Also waiting for the Delivery Report of this message.
Thanks,
Winnie Liang
TechNet Community Support

Tow read receipt received for one email

Similar Messages

Maybe you are looking for