Tower only has CD Drive, can't install Tiger DVD

Obviously I could go buy an external DVD Drive. This was the answer I got when asking Applecare if there was a way for me to install my Tiger DVD onto my Powermac G4 Tower with only a CD Drive. I know there are other ways around this problem. I called the Apple Store, and they informed me that Apple will send a CD version that I can install for a nominal fee. This is better.
But I searched some more and someone mentioned that I could take certain files from the Tiger DVD (on another computer with a DVD drive) and burn them to a CD and just use that.
Is this possible? If so, which files are necessary to achieve this?
Thanks in advance

Hello Brad.
I don't know about taking certain files only from the Tiger DVD and burning them to CD - not sure how anyone made this work so your best options are as follows:
Use the Media Exchange Program to exchange your DVD media for CD media or if you have access to another Mac with Firewire and a DVD drive, you can connect the two computers via Firewire Target Disk mode which will allow you to install Tiger from the Mac with the DVD drive on the Mac without.

Similar Messages

  • I don't have a dual-layer drive, can I install Tiger or Leopard?

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    Mac OS X 10.4 Tiger, and Mac OS X 10.5 Leopard come on what appear to be larger than 4.7 GB discs. This does not mean you need a dual layer drive to install them. Some Macs capable of installing Tiger or Leopard came with a built-in CD-RW, or CD-ROM drive. For those a compatible Firewire DVD drive for booting Mac OS X can work instead of replacing the internal drive. Tiger also came in a limited edition Media Exchange Program CD installer package, which you may be able to find in the open market. The limitation for each is dependant on other hardware:
    1. If your Mac shipped new with no Firewire, you may be able to install Tiger a special third party addon software known as XPostFacto.
    2. If your Mac shipped new with less than 867 Mhz built-in processor (including dual processor 800 MHz or less), you may be able to install Leopard with a special third party addon software known as Leopard Assist.
    3. If your Mac shipped with a processor upgrade card installed, and #2 is true, a firmware update may be available from the processor upgrade card vendor that allows Leopard's installation.
    4. Tiger needs at least 256 MB of RAM.
    Leopard needs at least 512 MB of RAM.
    If you have a lot of dashboard widgets, you may need to increase RAM to improve performance on either operating system. The RAM needs to follow Apple's specs to ensure smooth operation. Only get RAM with a lifetime warranty.
    5. Officially you need for Tiger:
    "At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools" from: http://support.apple.com/kb/HT1514
    And officially for Leopard you need:
    "9 GB of available disk space or more" from http://support.apple.com/kb/HT3759
    However, I would add to that if your hard drive doesn't have at least 15% of the drive free in addition to that, you may experience significant slowing down in the operating system function. This number has been arbitrarily discovered by many users.
    6. When installing Tiger or Leopard, if your machine shipped with Panther (10.3) or earlier, be sure to get the retail Tiger or retail Leopard.
    The Tiger installer is a san serif gray and white X with a spotlight on the center of the X on a black background.
    The Leopard installer is a san serif black and gray X on a pink galaxy centered on a black background.
    This is the 1st version of this tip. It was submitted on Dec 23, 2009 by a brody.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    Mac OS X 10.4 Tiger, and Mac OS X 10.5 Leopard come on what appear to be larger than 4.7 GB discs. This does not mean you need a dual layer drive to install them. Some Macs capable of installing Tiger or Leopard came with a built-in CD-RW, or CD-ROM drive. For those a compatible Firewire DVD drive for booting Mac OS X can work instead of replacing the internal drive. Tiger also came in a limited edition Media Exchange Program CD installer package, which you may be able to find in the open market. The limitation for each is dependant on other hardware:
    1. If your Mac shipped new with no Firewire, you may be able to install Tiger a special third party addon software known as XPostFacto.
    2. If your Mac shipped new with less than 867 Mhz built-in processor (including dual processor 800 MHz or less), you may be able to install Leopard with a special third party addon software known as Leopard Assist.
    3. If your Mac shipped with a processor upgrade card installed, and #2 is true, a firmware update may be available from the processor upgrade card vendor that allows Leopard's installation.
    4. Tiger needs at least 256 MB of RAM.
    Leopard needs at least 512 MB of RAM.
    If you have a lot of dashboard widgets, you may need to increase RAM to improve performance on either operating system. The RAM needs to follow Apple's specs to ensure smooth operation. Only get RAM with a lifetime warranty.
    5. Officially you need for Tiger:
    "At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools" from: http://support.apple.com/kb/HT1514
    And officially for Leopard you need:
    "9 GB of available disk space or more" from http://support.apple.com/kb/HT3759
    However, I would add to that if your hard drive doesn't have at least 15% of the drive free in addition to that, you may experience significant slowing down in the operating system function. This number has been arbitrarily discovered by many users.
    6. When installing Tiger or Leopard, if your machine shipped with Panther (10.3) or earlier, be sure to get the retail Tiger or retail Leopard.
    The Tiger installer is a san serif gray and white X with a spotlight on the center of the X on a black background.
    The Leopard installer is a san serif black and gray X on a pink galaxy centered on a black background.
    This is the 1st version of this tip. It was submitted on Dec 23, 2009 by a brody.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

  • Re: I don't have a dual-layer drive, can I install Tiger or Leopard?

    "This tip is ready for consideration"

    Hi a brody,
    Maybe it's my training that states to focus on what we can do, but I'd suggest changing the double negatives to positives. Let me know as that does leave out the "if and only if" implication of the "can't" statements which you may want to keep.
    Mac OS X 10.4 Tiger, and Mac OS X 10.5 Leopard come on what appear to be larger than 4.7 GB discs. This does not mean you need a dual layer drive to install them. Some Macs capable of installing Tiger or Leopard came with a built-in CD-RW, or CD-ROM drive. For those a compatible Firewire DVD drive for booting Mac OS X can work instead of replacing the internal drive. Tiger also came in a limited edition Media Exchange Program CD installer package, which you may be able to find in the open market. The limitation for each is dependant on other hardware:
    1. If your Mac shipped new with no Firewire, you {color:red}may be able to{color} install Tiger {color:red}with{color} a special third party addon software known as XPostFacto.
    2. If your Mac shipped new with less than 867 Mhz built-in processor (including dual processor 800 MHz or less), you {color:red}may be able to{color} install Leopard {color:red}with{color} a special third party addon software known as Leopard Assist.
    3. If your Mac shipped with a processor upgrade card installed, and #2 is true, a firmware update may be available from the processor upgrade card vendor that allows Leopard's installation.
    4. Tiger {color:red}needs{color} at least 256 MB of RAM.
    Leopard {color:red}needs{color} at least 512 MB of RAM.
    If you have a lot of dashboard widgets, you may need to increase RAM to improve performance on either operating system. The RAM needs to follow Apple's specs to ensure smooth operation. Only get RAM with a lifetime warranty.
    5. Officially you need for Tiger:
    "At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools" from: http://support.apple.com/kb/HT1514
    And officially for Leopard you need:
    "9 GB of available disk space or more" from http://support.apple.com/kb/HT3759
    However, I would add to that if your hard drive doesn't have at least 15% of the drive free in addition to that, you may experience significant slowing down in the operating system function. This number has been arbitrarily discovered by many users.
    6. When installing Tiger or Leopard, if your machine shipped with Panther (10.3) or earlier, be sure to get the retail Tiger or retail Leopard.
    The Tiger installer is a san serif gray and white X with a spotlight on the center of the X on a black background.
    The Leopard installer is a san serif black and gray X on a pink galaxy centered on a black background.
    An Apple user since 1981 Mac OS X (10.6)

  • Can you install Tiger onto a drive with data?

    Hello,
    I would like to ask if you can install Tiger onto a hard drive that already has data files on it. I have a 250 GIG hard drive and it already has 10 GIGs of data on it. Can I install Tiger on this drive or might it corrupt my files?
    Its a long story but here is a quick summary of why I am attempting to do this:
    I have a 350 MHz Blue and white G3 (rev 1) with two hard drives: the original 12 GIG ATA drive and a 250 GIG SATA drive (internal) connected with a 1S2 Seritek SATA controller.
    My 250 GIG drive has two partitions but only one is available to Tiger. You see, by accident I originally formatted my 250 GIG drive with an extremely small partion (32 Megs). I meant to type "30 GIGs" and by accident I typed "30 Megs". Oops That was supposed to be my OSX 10.4 volume. Its too late now - its too small. So I only have two choices for a place for TIger: my 12 GIG drive or the other partition of my 250 GIG drive. I am reluctant to choose my 12 GIG drive because it already has an older OS on it (OS 8.6).
    I was concerned about installing TIger on the data partition of the 250 GIG drive because that is where all my valuable data files are - 10 Gigs of data. I don't want to risk scrambling this data in any way.
    Is it safe to install Tiger onto this partition with my data files? Or is the possibility it might do something to my data.
    Its only a temporary install so that I could burn my 10 GIGs of data files to DVD for backup and then I will start all over again and erase the entire hard drive and reinstall from scratch onto the 250 GIG drive once my data files are safely backed up. (I will not partition the 250 GIG drive i nthe final install - it will be one big partition.)
    One other question:
    When you format a disk in Tiger are there options to "low level format" or "zero all data" or will just a straight "erase" do the job sufficiently? I bought my 250 GIG Hitachi SATA drive new and so I am not sure if it worth the time to re-erase it with "zero all data" (if that is an option in the Tiger Disk Utility). What is the best formatting option to prepare this drive in the most beneficial for Tiger?
    Thanks for any suggestions.

    Thanks scb and Jeff,
    Jeff, you have me thinking now. I think I will be safe and try another idea. I have a 4 GIG internal SCSI drive I could use to backup my data in 4 GIG sections at a time via my Adaptec 2430 SCSI card. I could then move this hard drive over to my other G3 onto its 40 GIG hard drive. This would be done three times to take off all my data and essentially provide a backup before I install Tiger. Good idea. You are right. It is better to play it safe.
    By the way 8.6 can handle HFS+. And yes, I should eventually buy an external drive solution - probably an enclosure. I saw one called "coolmax" [1]. It could hold a SATA drive and it had USB, firewire and also an external SATA port.
    And also Jef thanks for the info about formatting drives. I am glad to hear it is not important to zero all data if you don't have to. I am not concerned about havig anything to hide and so yes, I will just click "format" - that should be fine. Zero all data takes such a long time and I would rather avoid using it if I don't need this feature. Thanks for the advice.
    Thanks for the new safer direction.
    [1] Coolmax (CD-311-SATA Combo)
    Coolmax Aluminum USB 2.0 External Case/Enclosure for 3.5" SATA/IDE Hard Drives, USB2.0, IEEE1394a, Serial ATA triple interface input CD-311-SATA Combo
    http://www.iocombo.com/product/showproduct.php?productid=0EGD&PHPSESSID=3c41735b f27252cf17a17350cb603e0e
    $69.95
    http://store.yahoo.com/directron/35enclosure.html
    $53.99 at directron

  • On Windows 7 Ultimate, desktop with C (system) drive, D K and L drives, can I install Adope Creative Suite 6 Production Premium (from cd's) to Drive D (not C). Thank you.

    On Windows 7 Ultimate, desktop with C (system) drive, D K and L drives, can I install Adope Creative Suite 6 Production Premium (from cd's) to Drive D (not C). Thank you.

    you can but there may be some issues and a lot of files will be saved to your c drive, anyway.

  • How big a internal hard drive can I install in a G5 Powermac

    Model Name:          Power Mac G5
      Model Identifier:          PowerMac11,2
      Processor Name:          PowerPC G5 (1.0)
      Processor Speed:          2 GHz
      Number Of CPUs:          2
      L2 Cache (per CPU):          1 MB
      Memory:          4.5 GB
      Bus Speed:          1 GHz
      Boot ROM Version:          5.2.7f1
    How big a internal hard drive can I install in a G5 Powermac

    2.1 TB for certain & some 3 TB drives work if Partitioned to less than 2.1 TB but then it must be GUID instead of APM, most important is if it is SATA I 1.5Gb/sec compatible.

  • After installing a new hard drive can I install snow leopard directly from snow leopard disc

    After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz

    You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
    (64305)

  • I want to pgrade to an SSD drive in my Mid 2007 MacBook. What SATA hard drive can I install 2 or 3??

    I want to pgrade to an SSD drive in my Mid 2007 MacBook. What SATA hard drive can I install 2 or 3?? That seems to be just about all I can find out there, so far. Are those drives compatable with this macine?  thx

    SATA II

  • Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

    Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

    Hello,
    You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
    http://support.apple.com/kb/HT1661
    Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
    We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

  • Unable to install SSL Certificate - ADMIN4118: Only one server certificate can be installed at a time

    Hi,
    We are trying to install SSL certificate (Verisign Class 3) on iPlanet Web Server (version 7). However, at the final step we are getting the error "ADMIN4118: Only one server certificate can be installed at a time"
    We are following the below steps,
    Under "Server Certificates" tab,
         -> Click on "Install" button.
         -> On "Select Configuration" click on "Next" button.
         -> On "Select Tokens and Passwords", select default token as "internal" and click on "Next" button.
         -> On "Enter Certificate Data", select option as "Certficate File" and give path to the certificate file which is having .p7b extension
         -> On "Certificate Details" we are getting warning as "Duplicate Server Details Found" and it's by default using the existing certificate's nickname.
         -> On "Review" page after clicking "Finish" button, an error is displayed saying "ADMIN4118: Only one certificate server can be installed at a time"
    There are multiple sub-domains availble and the new certificate we want to install contains one more sub-domain.
    So, say currently the subdomains present are,
    1.abc.com
    2.abc.com
    so on...
    and now we are trying to install a SSL certificate having one more subdomain say 10.abc.com.
    Please let us know if you have solution to this problem.
    Thanks,
    Rajesh

    Hi Rajesh,
    That error is most commonly seen when you are trying to install a certificate chain into the Web Server.
    The chain should be installed using the "Certificate Authorities" tab per the following steps:
    1) Login to the Admin Console.
    2) Click Edit Configuration from Common Tasks > Configuration Tasks.
    3) Click the Certificates > Certificate Authorities tab from the Configurations page.
    4) Click the Install... tab from the Certificate Authorities (CAs) page.
    An Install CA Certificate Wizard opens. The wizard guides you through the settings available for installing a Certificate Chain. Select Certificate Chain when prompted for Certificate Type.
    You should then see the CA and intermediate certificate(s) listed in the security database.
    If you have access to MOS, more details can be found in the MOS KM Note:
       Oracle iPlanet Web Server - 'ADMIN4118: Only one server certificate can be installed at a time' When Installing Certificate Chain (Doc ID 1925025.1)
    regards
    Tracey

  • My camera roll in my 5c has over 2000 pics my photo stream only has 900, how can i make the photo stream have the same amount of pics so i can delete some from my roll to free up space

    my camera roll in my 5c has over 2000 pics my photo stream only has 900, how can i make the photo stream have the same amount of pics so i can delete some from my roll to free up space

    Photostream is not a substitute for importing your photos to your computer.
    How long are My Photo Stream photos stored in iCloud?
    The photos you upload to My Photo Stream are stored in iCloud for 30 days to give your devices plenty of time to connect and download them."
    ow many photos are stored in My Photo Stream on my devices and computers?
    iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space.
    Your iOS devices keep a rolling collection of your last 1000 photos in the My Photo Stream album.

  • Can I install Tiger in a Dual 500 MHz PowerPC G4?

    Can I install Tiger in a Dual 500 MHz PowerPC G4, or is it better to stick with 10.3.9? I'm having some problems so I was going to wipe he hard drive and re-build everything from scratch o I was wondering if migrating to OS X 10.4.9 is worthwhile or even compatible with this PCU. Thanks.

    Yes you can run 10.4 on your dual 500, I have a dual 450 (I overclocked it to 550...) and it runs pretty fast. You need a minimum 192 MB of RAM to install it and a minimum 128 MB of RAM to run it. I would suggest having at least 512 MB of RAM when running 10.4.
    What problems are you experiencing? If it's just lagging and seeming slow it may just be worthwhile to clean some temp files and clean up your disk. IMHO, 10.4 is a much better system than 10.3, and runs much smoother. I can guarantee you that your system will run much smoother if you wipe the disk clean and put a fresh install of 10.4 on there, and also get a decent amount of RAM in there. After I upgraded my RAM to 1.5 GB, I noticed a substantial difference in speed, and got a lot less spinning color wheels. But one thing that you need to always keep in mind is to KEEP YOUR DISK CLEAN!!! Clean the temp files often and limit your internet downloading. If you keep your computer on all of the time, restart it every once in a while. There's a lot of little things you can do to increase speed in OS 10.4. Use spotlight and recent applications. Fill up your dock. Don't clutter the desktop, etc. There's plenty of articles on the net to help increase speed without adding anything else to your system, just navigating through the OS differently.

  • Can I install Tiger on Mac OS X 10.6.2 Snow Leopard?

    I am using Mac mini and my OS version MAC OS X 10.6.2 Snow leopard and it was as default with my Mac mini,
    Can I install Tiger 10.4 on my current Mac mini in different location as dual boot?

    Welcome to Apple Discussions!
    No Mac can install an older Mac operating system than shipped with it.
    The only minor exception is Macs which shipped with Mac OS 9 and Mac OS X, but those ones only could run the Mac OS 9 that came with it and newer one, and Mac OS X that came with it and newer one up to the limitations of the hardware.
    Also no Mac can install an operating system disc from a different Mac that is different either in model or vintage.
    If you are missing compatibility with your new Mac Mini for a specific application, please check
    C!Net Download
    http://snowleopard.wikidot.com/
    http://www.macintouch.com/specialreports/snowleopard/slcompat.html
    for alternative titles, or feel free to ask if someone here knows of one.
    Message was edited by: a brody

  • How can you install the DVD or CD Sharing Setup software?

    How can you install the DVD or CD Sharing Setup software for a computer running MAC OSX 10.4.11 if you do not have a MacBook Air?

    You'll find the software you're looking for here:
    http://www.apple.com/support/downloads/dvdorcdsharingsetupupdateformac.html
    However, say for example you install this on your iMac G4 or Windows XP PC (you'll need to get the link for that one yourself), are you planning to try to share the drive with an iBook or other non-MacBook Air computer? If this is your case, I'm not shure if it can be done with that software. I'll need to get back to you on that one.

  • How can i install iwork dvd in Macbook Air?

    Somebody know how can i install iwork dvd in Macbook Air? I try to use the CD compartment from my Macbook pro, but it don't work... tks

    First, share your MB pro DVD drive on the network in System Preferences > Sharing.
    Insert the iWork DVD into the MBpro's drive.
    Then go to your MBair and click "Remote Disc" in the Finders Sidebar.
    You'll see your MBpro listed in the finder window.  Click the arrow next to The MBpro name and you'll see the shared DVD.  Double click that and the installation process should begin.
    Regards,
    Captfred

Maybe you are looking for