Tower problem in Old Forge, NY 13420

All summer, multiple people mainly with iphones have been having problems retrieving voicemails and some txt messages, especially trying to send a txt with a picture in the Old Forge, NY area.
As soon as you leave the area and connect to another tower the stuff sends out or comes in.
Not sure how to notify Verizon about this but I think someone should look into it.

I was already using OS X. I actually had 10.4 installed, but downgraded to 10.2 Server since that is the only server edition OS X I have that is compatible with the G4. The machine worked beautifully with 10.4... why would it not be able to handle 10.2? Also, the machine has a gigabyte of ram which should be more than enough for 10.2...
The installation disc seems to be in fairly pristine condition. There are no scratches and I made sure to clean the dust off of it before inserting the disc into the machine. Also, doesn't the installer verify the contents of the installation packages before running the install? And even if not, wouldn't it at least report any issues it encountered during the installation process to notify me of a bad/incomplete install? The installer seemed to go through all of the packages without a single error message or warning, as if everything had gone flawlessly...
I mounted the drive in target disk mode on another mac and used disk warrior to attempt to repair it. I rebuilt the drive, repaired permissions and checked all files. The problem continues, however... I'm just about ready to give up at this point. This is extremely frustrating...

Similar Messages

Problem transferring old iPhone 3GS to new phone 5S using computer. The iMac which I've been using to back up 3GS for years does not seem to recognize the 5S. No setup assist is coming on screen so I can't begin the transfer. Any ideas for this?

Problem tranferring old iPhone 3GS (ios 6.1.6) to new iPhone 5S (ios 8.1.2) through iTunes on my iMac computer (OSX 10.5.8) . I have backed up the 3GS this way since purchase of 3GS. The computer does not seem to recognize the 5S is there -- no setup assist is appearing on screen. Any ideas welcome.

this may not be your problem my according to the tech specs on apple.com the 5s requires:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 8; Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 11.1 or later (free download

Could not access Creative Cloud today without updating it. After update it will not open. It spins for five seconds then closes. Mac Pro tower 3 yrs old 12 gb ram os 10.7.2

Could not access Creative Cloud today without updating it. After update it will not open. It spins for five seconds then closes. Mac Pro tower 3 yrs old 12 gb ram os 10.7.2

I was unable to access the laptop last night to create a new user; however my client would perfer not to try a second account since that would make it unusable for him while we test the second profile.
Also John Sophos was installed after this started to verify that it was not a virus/malware (I know pointless step but it has happened to me before) so I don't think that is the problem

Problems archiving old messages at the end of the year?

At the end of 2007 I'd like to create new mailboxes for messages sent and received in the year, date them, and move the messages across into them; leaving the Inbox and Sent box empty and ready to handle messages for 2008. Is this a reasonably straightforward thing to do? Are there potential pitfalls I should be aware of?

Yes, it’s reasonable and straightforward, and is also what I do, except I don’t wait till the end of the year to archive my messages. Instead, I create a (white) folder for each year, including the current one, and organize my mail by topic into (blue) sub-mailboxes there as I read them. My Inbox only contains messages (if any) that are waiting for me to do something with them.
Are there potential pitfalls I should be aware of?
The main pitfall you should be aware of would be not doing that and leaving all your mail in the account mailboxes indefinitely. Using Inbox and Sent for archiving purposes (which a lot of people do) is a bad idea.
Another thing to be aware of is that you shouldn’t use the same folder as both a mailbox (i.e. to store messages of its own) and as a parent folder for other folders. Mail allows that duality, but doesn’t handle it very well, and it’s better to not try to “take advantage” of it.
You may also want to read this:
Blue and white Mail folders explained
BTW, the title of your post is “problems archiving old messages at the end of the year?

No Problem with Old Firmware

I am having no problems with old firmware for my 27" iMac Quad i5. Should I update anyway?

As posted in another thread, after having my first ever screen flickers only after installing the 4850 firmware patch:
"Called tech support. She had me do a PRAM reset and since then I loaded 25 programs, many of which were busy doing things like playing music, using iSight, playing video - no more flicker or black screens. I expressed my doubts that the PRAM reset would help, but it appears to have been effective for this.
By the way, with 25 programs loaded and several active, I was able to use only 4 GB of this 16 GB machine. All 8 threads were busy but overall CPU use was modest most of the time. I think I taxed the GPU though and no problems."

We had a tower problem in our area and now I am unable to sign into my google account on my phone. I have tried to remove my account and set it up again, but am still having the same issue. It does not let me sign in keeps saying that sync is not respondi

I am unable to sign into my google account after a tower being down. Any ideas

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

MRP type change from VB to PD - Problem in old requirements MD04

Hello Experts,
For MRP run we were using VB as MRP type in material master. We upload schedule in scheduling agrrements. At time of MRP run system was only considering based on reorder point only.
Now business disicion is change and we have changed MRP type as PD. So at time of MRP run system should consider based on requirements i.e. from scheduling agreement. Now here is our problem. System consider and shows old scheduling requirement also in MD04. Let me explanin you in detail. Before changing MRP type from VB to PD, there were some schedule available in system. after that we have uploaded 2 3 more schedule. But system still shows old schedule availabe at time of MRP type change.
Can you please help me how to resolve this?? How can we clear old requirements from system.
Thanks in advance for your reply.
Regards,
Piyush

Hi,
Not too sure but , try # SDRQCR21
Regards
Chandrasekhar

Problems with old(ish) EIDE drive in new Neo4 system

I've been building my new system today, the only components I have retained are the optical and hard drives and the memory. System is as follows
K8N Neo4 (non SLI edition)
Athlon 64 3700+
PC3200 Crucial 1Gb (2x512Mb sticks in dual channel)
BFG 7800GT OC 256Mb
Creative X-Fi Fatality FPS
Seagate Barracuda 7200.7 120Gb (EIDE) [ST3120026A]
Seasonic S12 500W PSU
XP Pro
The problem I'm having is that while my HDD is detected in BIOS, when I boot from the XP CD, the setup runs it's 'checking hardware configuration' and then dumps me at a black screen. Disconnecting the drive allows me to continue. Here's what I've tried:
a) Initially I thought I'd [burger] the HDD in the transfer, but I replaced it in my old system and booted from it fine.
b) I tried changing the IDE controller, but I had the same problem on both. My DVD drive chain works on both controllers.
c) I tried swapping the jumpers - Master and Cable Select have the same effect.
I can only assume I have something set/not set in the BIOS, but can't for the life of me figure out what. I'm hardly an expert when it comes to internals, and I'm all out of ideas!

Quote from: RogerP on 26-December-05, 00:45:28
Excelle.
Download Seagate’s disk install program and make sure you hard drive is totally erased and reformatted. You may have an old MBR (Master Boot Record) on the old disk drive that’s causing the problem.
Roger
Cheers, I'll give that a go.

Problems Printing old CS1 files in CC

Printing old files imported from CS1 in CC I get the following warnings:
Warning
The document contains artwork that requires flattening.
The document contains RGB images.
The Document Raster Effects resolution is 72 ppi or less.
I really don't know where to begin?
I've changed the document color mode to CMYK - it was RGB originally.
The print preview screen is blank.
This doesn't seem to be the problem as other similar RGB documents print fine.
I've tried to flatten transparency after selecting all items, this doesn't work either.
Why the need to flatten artwork?
File contains gaussian blurs - the blurred items printed in a new file.
I don't think it is the less than 72ppi warning.
I print from Illustrator to PDF CC.
When I copy the paths/objects from one file to a new one the print preview and print work fine?
This is an impractical solution as there are 100s of sub-layers with hidden and locked items.
Thank you very much in advance.
Cheers
Mike

Mike,
If you have trouble installing/running the older versions in 8.1, you can just use Compatibility. At least from 8 to CS6 can run on XP, so CS1 and CS3 are right in the middle.
You may need to run the computer in an earlier mode, such as XP mode, to install it (you may try in normal mode first). Here is how:
How to Get a Windows XP Mode Virtual Machine on Windows 8.1
Once installed, you should be able to get it to run with the PC in normal mode as follows (first run):
1) RightClick the shortcut;
2) Click Properties;
3) Click Compatibility;
4) Tick Run this program in Compatibility mode for, then select XP or a later version in the dropdown list;
5) Start your good old version.
After that, you can just DoubleClick the shortcut.

Problem with old namespace in WSDL file

I have a problem with my WSDL file. My scenario is SOAP to IDOC.
Originally the ESB data types were configured under namespace urn:test1:xxx for development purposes. When it came time to implement and test, we copied the data types from the old name space to a new namespace http://company.com:interface.
After the new objects were created, all the old test objects were deleted, including the old namespace definition. Now when I generate the WSDL file, the top part of the WSDL file looks correct, but toward the bottom, there are references to the old namespace.
Does anyone know why these reference are appearing, and is there any way to correct this without deleting all my objects and rebuilding everything?
Thanks in advance for any help. Will award points for help.
Terri

Found the problem....the XML namespace in the Message type still contained the old namespace. When this was changed to the new namespace, second target namespace was no longer generated.

Problem removing old versions with customization wizard 8

I'm trying to deploy Acrobat Reader 8 to our XP Professional desktops via Active Directory software installation (Windows Server 2003 domain)
I have obtained the MSI release of Reader 8, customised it using Adobe Customization Wizard 8, and deployed it through AD as per the Adobe documentation. This works as expected for new machines without a previous release of Reader installed.
However for desktops that have Reader 6 or 7 installed, we end up with two versions installed side by side (visible in Add/Remove Programs). Reader 8 works fine at this point. Removing the older version causes the PDF file association that Reader 8 created to be broken, also the Internet Explorer browser plugin is broken. Reader 8 has to be reinstalled manually to fix this issue.
I have read that Reader automatically removes old versions of itself when you install a new version. Additionally, when customising the MSI, "Remove previous version of Reader" is greyed out. However it appears that the installer is not removing old versions.
Any ideas as to a solution?
Thanks a lot
Tom Fanning

I have the same problem and i have wasted like 50 hours on this s**t. I'm trying to deploy reader 8 on our 1800 XP workstations with SMS 2003.
The cutomization tool is totally useless. The only way i have came up with is to create a script wich checks if earlier versions of Adobe reader is installed by looking if the installation folders exists (for example c:\Program Files\Adobe\Acrobat 7.0\Reader ).
If the installation folders exists, the script would run the uninstallatoin string of the reader using its Windows installer product code, like this:
MsiExec.exe /x /qn {AC76BA86-7AD7-1035-7B44-A70000000000}
Now, the problem with the script is that we have several versions of reader 6 and 7 including 3 different languages. The script or the .BAT file would be quite complicated and the testing is allmost impossible.
I think that it would be much more easier to create a script that deletes all the shotcuts for Adobe reader and then installs a Freeware product for openig PDF files.
http://www.docu-track.com/home/prod_user/PDF-XChange_Tools/pdfx_viewer
In my opinion, adobe products are a nightmare for IT admins and their support system is even worse than Microsofts.

Visa problem with old instrument

Hallo!
I have a Problem with an old Jobin Yvon HR320 Monochromator which I try to access via VISA. Sadly I have no manual for the instrument. My task is, to convert an old VEE-Programm to Labview 7.0 using an agilent PCI GPIB-card. In VEE the monoc. is initialised with a string "248222 " which returns a B if not initialised yet. This works fine with LV. The next step is to send "O2000" as a string then, in VEE, Write Byte "0" and at last a blank. This should return a character "f". In LV I don´t know how to write the zero as byte. The VEE I/O busmonitor shows that there is a differenc if I write the zero as text or as byte. Maybe someone knows a solution for this problem?
Thanks
C.Kandler
P.S. I read a lot about the ni-spy, but I can´t find it in labview. Is there a posibility to download this tool?

C.,
a LabVIEW string is more like a Pascal string, rather than a C string.
To write binary data you should create a string constant or control, right-click on it and choose "'\' Codes Display" or "Hex Display". Now you can enter a null Byte as '\00' or '00' (without the quotes, of course), depending on what type of display mode you have chosen. The first mode ist easier to combine with normal printabel text, whereas the latter is better for binary strings.
NI Spy was installed here in C:\Program Files\National Instruments\NI Spy\NISpy.exe. It might be a component with higher level versions of LabVIEW, not with the base version.
But if you create probes you could as well debug your app without NISpy.
HTH and
Greetings from Germany!
Uwe

I am having problems seeing old events/photos. It looks my problems started when I updraded to OS X

I am unable to see my old photos/events on IPhoto and I fear I might have lost them for good. It looks it all started when I upgraded my OS to OS X Maverics.

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Problem Finding Old Data

I have an iPod Touch 5th generation and I've had for a couple years now. Recently, I had to reset my iPod because I forgot the password. I followed the procedure to help me solve the problem, which is to plug my device in and restore it. Everything went fine when I restored it, however at the end of the process my iTunes wasn't working and I had to end it (I have a windows 8 PC) My device was already restored, unfortunately I accidentally set it as a new iPod and all my data was gone. I managed to download some apps because I had family sharing, but the rest of my old data (ex. photos, contacts, in app purchases) was no where to be seen. I was pretty sure however before I set my new iPod, my old data was somehow transferred to iTunes. My only issue is where exactly my data went. Please help, thank you very much!!!

Try restoring from backup
How to back up your devices using iCloud or iTunes - Apple Support
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Problems with old user account coming up during downloads.

i am trying to download internet explorer 9.0 on desktop Presario PC. When installing the user account control pops up. A while ago, we had to restore the computer and now operating off a different user account. Any upgrades are defaulting to the old user account icon and looking for a password, I do not remember the old password. I tried to change user account profile, but it always is looking for old user account and password. Thanks for any help

Hello esther70
What operating system are you running and what is the model of your HP computer? If you are unsure of the model, follow the link below. Is the current account you are using an Administrator?
How Do I Find My Model Number or Product Number?
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Tower problem in Old Forge, NY 13420

Similar Messages

Maybe you are looking for