TP_CALL_FAILED
Hi Experts,
I am not able to release a transport from Development. It is throwing an error in SE09: Could not start transport control program tp.
STMS --> Import Overview --> System Status shows as Error when reading the queue.
TMS Alert Viewer: Error Message is as follows:
System N01 Command TMS_MGR_READ_TRANSPORT_QUEUE
Client 000 Service Transport Service
User TMSADM Start Online
Date 16.05.2008 Function TMS_TP_SHOW_BUFFER
Time 10:32:16 Message TP_CALL_FAILED
Could not start transport control program tp
RFC error: Error opening an RFC connection.
Thanks,
SriCharan
I have restarted the system and it is working fine now.
But I am not aware of the issue. Any suggestions will be appreciated in finding the cause.
Similar Messages
-
Transport control program tp could not be started
Hi,
While importing a request to Quality Server , transport terminates with an error "Transport control program tp could not be started" RFC error.
Function TMS_TP_IMPORT
Message TP_CALL_FAILED
Tp output says "This is tp version 340.16.37 (release 640)
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBSWPATH is no longer used."
340.16.37.kernel release 640,patch number 193.
RSTPTEST was successful .
Changed auth/rfc_authority_check to value '0' in the profile and restarted.
user id provided in RFC connection is TMSADM and the user is
having "S_RFC" authorization object.
This error started after putting the oracle patchset 9.2.0.8.
SAP version 4.7, Oracle 9.2.0.8, on AIX 5.2
It will be appreciable if any one can help me out in this issue.
Regards,
Saji KumarHi,
provide result for
tcode - stms_import -> import queue -> check -> transport tool
also execute RSTPTEST report on QAS,
RFC error indicate problem in RFC connection , check it using SM59
regards,
kaushal -
STMS error- Transport control program tp could not be started RFC error
Hi,
All SAP expert i have query in STMS, i am trying to transport request from r/3 4.7 to CRm 4.0 & i am getting this error
Function : TMS_TP_SHOW_BUFFER
Message : TP_CALL_FAILED
Error code: 4
let me know how do i get rid of ths error.
any help will be appriciated,
Thanks In Advance.
~JohnHi,
It may be a problem with your tp - if you want to be sure, use tp at the O/S Level to do your import and then you should be able to find the exact error.
At the request to buffer:
tp ADDTOBUFFER <change request #> <SID> pf=TP_DOMAIN_<SID>.PFL
Then import it into the suitable client:
tp IMPORT <change request #> <SID> pf=TP_DOMAIN_<SID>.PFL
Please award points, if helpful.
Thanks, Dibya -
Could not start transport control program tp
Hi all
when i am trying to see the TP Parameters i am getting the below error:
System DV2 Command TMS_MGR_READ_TPPARAM
Client 000 Service Transport Service
User TMSADM Start Online
Date 10/18/2008 Function TMS_TP_READ_TPPARAM
Time 12:03:39 Message TP_CALL_FAILED
Could not start transport control program tp
RFC error: Error when opening an RFC connection
and in SMGW i am seeing the below error:
Sat Oct 18 11:09:33 2008
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >/usr/sap/DV2/DVEBMGS00/exe/tp< [gwr3cpic.c 6135]
ERROR => GwISearchPartner: HOST: hostname, conv ID: 60516439 [gwr3cpic.c 6148]
please help me to solve this.
Thanks:
GiridharHi Giridhar,
I think its a cpic timeout occurring before reading tp could start. Please check the parameter gw/cpic_timeout in your system. The default may be 20 sec for this parameter.. You can consider it increasing to 60 sec.
https://service.sap.com/sap/support/notes/638701
Regards,
Debasis. -
RFC error text: Error when opening an RFC connection
Hello!
I have recently an error in Tcode STMS.
The following error comes up:
I use only Solution Manager and have to tranport
System <SAPSID> Kommando TMS_MGR_READ_TRANSPORT_QUEUE
Mandant 000 Service Transport Service
Benutzer TMSADM Start Online
Datum 24.09.2007 Funktion TMS_TP_SHOW_BUFFER
Uhrzeit 11:07:06 Meldung TP_CALL_FAILED
Moreovert is not possible to open import gueue.
The error is: the import queue cannot be read.
Thank you very much!
regards
ThomFirst, could you please do the following check:
1) Call SM59, check RFC destinations: AI_RUNTIME_JCOSERVER and
AI_DIRECTORY_JCOSERVER, what is the Program ID under Registered
Server Program section?
2) Call J2EE visual admin, choose cluster -> server -> JCO RFC provider
there should be AI_RUNTIME_<SID> and AI_DIRECTORY_<SID> under
available RFC destination tab. Please make sure their names are the
same as the program ID registered in AI_RUNTIME_JCOSERVER and
AI_DIRECTORY_JCOSERVER respectively.
3) Also make sure the gateway host and service are the same in both
RFC configurations.
Can you perform an R/3 trace for this issue aswell - to trace the
RFC connection issue? It maybe that there is an error like
"timeout during allocate of registered program" which is likely with
this type of message in SXMB_MONI. (SAP Note No. 84850)
1) set gw/reg_timeout to a higher value
2) check/change current Queue and Mapping Configuration/Setup
the parallel number of XI outbound queues (XBTO* queues) is
set in XI configuration (SXMB_ADM); setting EO_OUTBOUND_PARALLEL
to e.g. 20 allows 20 messages to be mapped in parallel;
this queue number multiplies by the number of different
configured receivers
#receivers * EO_OUTBOUND_PARALLEL should correspond to the number
of parallel configured mapping threads (J2EE Visual Admin,
service JCo Rfc Provider, Destination AI_RUNTIME_*, #processes)
if ( #used-outbound-queues > #jco-mapping-threads ) then this
can cause the above seen timeout error
=> consequence check/change parameter EO_OUTBOUND_PARALLEL or
JCo mapping threads (processes)
Finally, if you are perhaps running on AIX, then check note 716927
Otherwise tell which OS do you run on
regards,
jaime -
IMPORT ERROR : RFC Error
Dear Experts,
I have successfully upgraded Kernal Version from 129 to 175 in SAP ERP ECC 5.0, but when i am importing the queue the following error is coming.
System PRD
Command TMS_MGR_READ_TRANSPORT_QUEUE
Client 000 Service
Transport Service User TMSADM
Start Online
Date 03.08.2007
Function TMS_TP_SHOW_BUFFER
Time 13:49:42
Message TP_CALL_FAILED
Could not start transport control program tp
RFC error:
My SAP Version: ECC 5.0
DB : MS SQL SERVER 8.0
OS : WINDOWS NT
Please help me to find out the solution.
Regards,
Praveen MeruguHi ,
I m VASU, basis consultant from Bangalore.
I m unable to get the IMPORT QUEUE in STMS.
System PRD
Command TMS_MGR_READ_TRANSPORT_QUEUE
Client 000 Service
Transport Service User TMSADM
Start Online
Date 03.08.2007
Function TMS_TP_SHOW_BUFFER
Time 13:49:42
Message TP_CALL_FAILED
Could not start transport control program tp
RFC error:
My SAP Version: ECC 5.0
DB : MS SQL SERVER 2005.
OS : WINDOWS NT
I saw ur MSG in this forum....
Plzzz guide me how to reolve this issue at OS level...
I have tried updating the KERNAL level 142 to 175 , but still TP is not connecting.
Rest of all work in PRD is working fine ...only TP is not working due to this REQUESTS r not getting imported into PRD.
Tested tp connect <PRD> , R3trans -d, both were not giving any error..
Waiting for ur reply
VASU.G
[email protected]
Maybe you are looking for
-
I have a customer that own's a 2012 GMC Terrain with the basic touch screen radio. When we plug into the USB port the Nano will charge, but will not function thru the radio or steering wheel controls. I used an Ipod 5th Gen and it works fine. Also go
-
I have a Lenovo G700 series laptop and have recently found that I can no longer burn DVDs. I can burn CDs and the drive can read DVDs & CDs. I trawled the forums for any clue of what has gone askew including the registry fix, tried different media,
-
How to invoke servlet in a package in iPlanet Web Server 4.01 platform ?
I want to use a servlet which is in a package. http://10.251.9.194/servlet/aibd.GetService servlet is mapping to /home03/zhangxs/bbn/servlets. but the servlet can not be invoked. I read the errors file as following: [02/ 7��/2001:17:06:35] warning (1
-
Hi everyone. I just got Premiere Pro CS5 and started the program and opened up an old project I had edited using Premiere Pro CS3. Premiere Pro CS5 said it had to convert the project for editing in CS5. I clicked "okay" and the project opened up in C
-
I updated to itunes 11 and all my purchased music is gone.
After I updated my computer to itunes 11 all of my purchased music disapeared. When I go to the itunes store however, it lists all of my purchases, but when I try to download them again it tells me I have to purchase them again....Is there anyway of