TP CONNECT SID got error
Dear Gurus,
Please help ...
when i had configure STMS in My newly installed SAP NW 7.0 with EHP 1 for BI DEV & QAS. DEV is my domain controller. when i try to connect SID using command TP CONNECT <SID> it shows errors as per below.
BIQAS:biqadm 3> tp connect BIQ
This is tp version 372.04.40 (release 701, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
Actually i had set set SAPEVTPATH parameter in TPPRARAM but it show same.
Please do the needful.
Thanks in advance.
Nitin Patel
Hi Nitin,
First, I would suggest that you check your version of TP. It may need
to be updated.
Second, the solution for this problem is provided in the SDN:
Re: TP Command Error
Kindly ensure that you have set transdir (parameter DIR_TRANS) and
SETEVTPATH properly. This needs to be set in the profile.
Also please note that for all imports you need to specify on
TP_DOMAIN_<SID>.PFL.
TPPARAM was an old usage and from 4.7 it has been converted to
TP_DOMAIN_<SID>.PFL.
Also please check the TPPARAM file if the sapevtpath and transdir
variable have been set correctly.
It would usually be something like:
<SID>/sapevtpath = /usr/sap/<SID>/SYS/exe/run/sapevt
TRANSDIR = /usr/sap/trans
Please also carefully review the following notes:
Note 556734 - FAQ Transport: Setup and further information
Note 97993 - Central NT/UNIX transport directory
Note 62739 - Configuring a central transport host
The SAPEVTPATH parameter must point directly to the sapevt executable.
Aidan
Similar Messages
-
Technical Monitoring - Connect DB Oracle (Error)
Hi experts,
I would like to connect a database of an ERP System to our technical monitoring.
Therefore I go in SOLMAN_SETUP->Managed Systemconfiguration to step 5 - "Enter System Parameters".
Here I enter in "DB-Parameters" the following data:
Database Host: "DB Host"
Service Name: "DB SID"
Port Number: 1527 (where can I check this???)
TNS Name: "DB SID"
Character Set: ????
National Character Set: ????
Username: ora<sid>
password: ****
But on clicking on "Setup DBA Cockpit connection" I get the following error:
"The connection "<sid>" is not set up correctly. Database connection <sid>:ADBC error "Internal error 16 has occured"".
Does anybody know help on this?
Thank youHello Roland,
thats the output in the process, it seems, as I need to install oracle libraries???
B Loading DB library '/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so") FAILED
"Unable to find library 'libclntsh.so.11.1'." [dlux.c 445]
M {root-id=0017A47714101EE484B22C1661F85404}_{conn-id=0017A47714101EE484B2285550A0110C}_1
B *** ERROR => Couldn't load library '/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so'
[dbcon.c 5767]
B {root-id=0017A47714101EE484B22C1661F85404}_{conn-id=0017A47714101EE484B2285550A0110C}_1
B ***LOG BYG=> could not load library for database connection <db sid> [dbds 862]
B ***LOG BZY=> unexpected return code 8192 calling DBDS [dbacds 1862]
B Loading DB library '/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so") FAILED
"Unable to find library 'libclntsh.so.11.1'." [dlux.c 445]
M {root-id=0017A47714101EE484B22C1661F85404}_{conn-id=0017A47714101EE484B2285550A0110C}_1
B *** ERROR => Couldn't load library '/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so'
[dbcon.c 5767]
B {root-id=0017A47714101EE484B22C1661F85404}_{conn-id=0017A47714101EE484B2285550A0110C}_1
B ***LOG BYG=> could not load library for database connection <dbsid> [dbds 862]
B ***LOG BZY=> unexpected return code 8192 calling DBDS [dbacds 1862]
B Loading DB library '/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so") FAILED
"Unable to find library 'libclntsh.so.11.1'." [dlux.c 445]
M {root-id=0017A47714101EE484B22C1661F85404}_{conn-id=0017A47714101EE484B2285550A0110C}_1
B *** ERROR => Couldn't load library '/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so' -
I tried to update to newest version via pc. I got error because i didn't have this recovery program disc that was supposed to come with the purchase so it says, but it didn't and now my ipod touch 8gb won't connect with itunes anymore and is stuck on a screen displaying an itunes icon with a usb icon.
oke i'm not done with the whole thing, but i'm doing that right now. Most of the advice I've already read didn't work and at a certain point it said something about shutting down programs then restart. but i notice that there are some pretty important system things in that list and i don't want to mess up my pc :s i'm not a pc genius... and because i'm dutch and my pc-language is in dutch I often have trouble translating and well... i don't always understand the technical stuff in all the articles -_-
-
Hi folks,
I tried downloading the latest OS X Mountain Lion and [after a long time... I have a slow connection] I got an error message ... We could not complete your purchase The product distribution file could not be verified. It may be damaged or was not signed.
Everytime I retry or continue the download I just keep getting the same error message!!!
What can I do to get my product?
PMThe only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps. -
After recent itunes update my ipod touch 4 is not syncing properly...I got error message twice "ipod failed to sync properly because connection was lost, please try again"... it continued acting weird, now when i click on "sync now" it says preparing to sync, it goes through steps quickly says sync finished but it doesnt update.. can anyone help?
There's a good guide here on how to roll back to 10.7 https://discussions.apple.com/thread/4559563?tstart=0
-
I had register at iOS developer program. But every time I try to access iTunes connect, I got this error: Apple ID does not have permission to access iTunes Connect.
Hi any luck with this? I have a developer program as well but still shows same msg as above.
Thanks in advance. -
I have iPhone 4S.
Just updated to iOS 6.0.1.
I'm getting the very common "Cannot Connect to iTunes Store" error when I try to download anything in the App Store. I have tried EVERYTHING to resolve it and nothing works.
Here is what I have tried so far:
1. Set Date&Time to 2013. Try App Store. Got error. Set Date&Time to auto again. DIDNT WORK.
2. Set Date&Time to 2030. Try App Store. Got error. Set Date&Time to auto again. DIDNT WORK.
3. Rebooted iPhone twice after resetting Date&Time. DIDNT WORK.
4. Signed out of iTunes/Apple ID account. DIDNT WORK. Worse, now iTunes won't even acknowledge my account and wont let me sign back in! DIDNT WORK.
I have tried everything every one has said worked for them. Nothing works for me.
Does anyone have any suggestions before I throw the phone out the window? God help me, if I'm forced to go to Windows 8, I'll cry.Greek_Freek wrote:
Does anyone have any suggestions before I throw the phone out the window? God help me, if I'm forced to go to Windows 8, I'll cry.
Heavens no ... Don't do it!
There are a bunch of users posting about this problem right now. One might assume that there is something "hinky" going on with the Apple servers. There is one other thing that you can try, that you haven't already mentioned ... Don't know if it will work ... You may just have to wait this out until Apple fixes it but ....
Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
More than likely, it is an Apple glitch, but give it a try. -
hi, i just try to update my 3g in itunes unfortunatly it got error while updating it asked me to restore update but unable to restore it , now my 3g i locked and on screen it displying usb symbol connect to itunes ,please help me regarding this
I suspect your error was 1015, not 1051. This usually involves a jailbroken iPhone, use Google to find your solution.
-
when i try to connect oem(oracle enterprise manager)..
on oem console it returns followed error
agent connection to instance
ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
DATABASE INSTANCE DOWN
SID
orcl
Oracle Home
C:\app\user\product\11.2.0\dbhome
in services.msc
oracleagent,client ,oracleservice all are in started..
please let me know how to solve issue..
fyi-oracel 11g,on windows7 ostnsname.ora......
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = host)(PORT = 1521))
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
listner.ora...........................
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\app\user\product\11.2.0\d_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\user\product\11.2.0\d_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = host)(PORT = 1521)) -
Got error "Your acct is not valid for use in the Israeli store. You must switch to the US store before purchasing" while using an Israeli SIM card in Israel. I switched to Israel on my PC at home in mu itunes acct, but now cant connect to iTunes. Help?
found it!
http://www.ehow.com/how_8202183_change-app-store-account-location.html
Instructions
1.
1Tap "Settings" from the main menu of your iOS device.
2Tap "Store."
3Tap "View Apple ID."
4Enter your user name and password.
5Tap the space underneath "Change Country or Region."
6Select the region where you will be located.
7Tap "Done." -
after updating got error 4005. Now all I am getting is connect to itunes screen. Won't let me do anything with phone
Have you jailbroken either of these devices? Have you used the computer you are trying to update with to jailbreak a device? Have you tried using another computer to do the update? You may have to make an appointment at the Genius Bar to have the device checked, or send the device off to Apple care.
-
OS 8.0 update OTA to my 4S has killed the device. After the initial attempt failed I tried via iTune Restore and got Error 29.
Attempts to restore to an older version (7.1.2) failed as well. Same error.
The phone is stuck in the familiar "connect to iTunes" screen.
Has iOS8 destroyed my phone?Hi vijay294,
Welcome to the Apple Support Communities!
I understand that you received a restore error while attempting to update to iOS 8 and now you see the Connect to iTunes graphic on your display. In this situation, I would recommend using recovery mode to restore your iPhone. Please use the instructions located in the attached article to complete this process.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe -
Connection Message Shuttle Error
I am trying to run message shuttle for the first time. I am getting the error log below.
OpenSmtpConnection:
DllDate: May 8 2014
ChilkatVersion: 9.5.0.39
UnlockPrefix: LNDBRGMAILQ
Username: PKVTECHLAP01:danielch
Architecture: Little Endian; 32-bit
Language: .NET 4.0
VerboseLogging: 0
SmtpConnect:
SmtpHost: 172.16.192.51
SmtpPort: 25
SmtpUsername:
SmtpSsl: 0
StartTLS: 0
SmtpAuthMethod: NONE
SmtpConnect:
Need new SMTP connection
No SMTP login provided.
No SMTP password provided.
Skipping SMTP authentication because no login/password provided.
checkForExistingConnection: Elapsed time: 0 millisec
Connecting to SMTP server 172.16.192.51:25
smtp_host: 172.16.192.51
smtp_port: 25
smtp_user: NULL
auth-method: NONE
connect2:
ConnectFailReason: Connection rejected
--connect2
Failed to connect to SMTP server.
--SmtpConnect
checkOrMakeSmtpConnection: Elapsed time: 0 millisec
--SmtpConnect
Failed to connect to SMTP server
Failed.
--OpenSmtpConnection
--ChilkatLog
Please let me know if I am doing something wrong?that was another screenshot of your SMTP server settings, not an error - but I'm assuming it's the same type of chilkat library flag saying the SMTP connection was terminated...
Remote Administrator for restore is fine - for giggles I just downloaded the current Import version onto the same Win 7 x64 and restored the backup (that had some messages) to a 9.1(2) server using an account that had just remote admin - the SMTP connection went through fine and the restored completed without errors.
something somewhere between the COBRAS import application and the SMTP port on the Connection server is stomping on the connection - there's really no way for the client to determine that - all it knows is it issues the connection requests and it's not going through and reporting it to you - so if the server is somehow in a bad state (haven't seen that before) or there's a proxy involved or something somewhere getting involved - I can't really offer more than that - COBRAS is one of the most heavily used tools on the site (hundreds of downloads on any given day) so if there were some basic message restore show-stopper hiding we'd typically know about it pretty quickly. It's got to be something specific to your setup or a very unusual bug/state on the Connection side of the house. -
How to extract data from multiple tables (always got errors)
Dear Experts,
I have a simple mapping to extract data from multiple tables as a source (A, B, C) to a target table (X). Below is the picture:
(Sources)....(Target)
A----------------***
B----------------X
C----------------***
Sample Source Data:
Table A:
ColA1
100
200
etc
Table B:
ColB1 ColB2 ColB3
10 Y Ten
20 Y Twenty
30 Y Thirty
etc
Table C:
ColC1 ColC2
11
12
13
etc
Target table (X) should be (just has 1 group INGRP1):
ColA1 ColB1 ColB3 ColC1
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
Scenarios:
1. Directly map from A, B, C to X. Unable to map with error message: "API8003: Connection target attribute group is already connected to an incompatible data source. Use a Joiner or Set operator to join the upstream data first before connecting it into this operator."
2. Map each source to Expression Operator and then map from each Expression to target table. I am able to map all attributes successfully but got error when validating it with message: "VLD-1104: Attributes flowing into TEST.EXPR_SRC.INGRP1 have different data sources."
How can I achieve the correct mapping for this purpose?
Use Joiner? I have no key to join the sources
Use Set? The sources have different number of columns
Thanks in advance
PratThanks Nico,
I think it will results data like this:
100 10 Ten 11
200 20 Twenty 12
300 30 Thirty 13
etc
and not the expected:
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
But it inspired me to solve this by adding key expression in each source table (B & C) to be joined to table A with this formula:
100+TRUNC(INGRP1.COLB1,-2)
Regards
Prat -
Connection Timed Out error while saving messages in Solution Database
Dear Experts,
I have configured trex in solution manager..while saving service messages in 'Solution Database' i used to get "page cannot be displayed" now iam getting the fallowing error..please suggest any changes required..
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Thu May 14 15:11:24 2009
Module: icxxthr.c
Line: 2698
Server: Host_<SID>_<Sys no>
Error Tag: {-}
Detail: Connection to partner timed out after 60s
Regards,
BabuHi Babu,
you might try the following on the server where the problem occurred: call transaction SMICM -> Goto Services -> Select the service you are working with ->
Service Change -> increase value for "Max. Processing Time"
In case your application still times out you should see the changed value displayed.
Sometimes just executing the application again 2-4 times might help, because compiling might happen and is taking some time in the system.
With regards to parameters see also SAP Note [824554|https://service.sap.com/sap/support/notes/824554].
Best regards,
Andreas
Maybe you are looking for
-
How to run a java program as screensaver?
I wrote a java application that will do some timing on the machine for activity. if the user does not move for an hour, the machine will logoff the user. Please tell me how can i make this to become a screensaver so that when there is movement the ja
-
Cropping my pictures - Want to know how big I can print them afterwards
I have always been a Kodak EasyShare user in the past. I decided that this year after my vacation, I would start using iPhoto for all of my photos. I am having a bit of a problem right now and I am hoping that somebody can help me. In EasyShare, when
-
How long the first level certificartion is valid
Hello, I have passed the exam 1Z0007 (Step 1- Oracle 9i-SQL) in 2009. But I did not take the 1Z0-144 - PLSQL to get the Associate certificate then. I am willing to get it now. So can I just take the step 2 exam (1Z0-144) or should I have to take both
-
BPC Process Dimension Pop Up Freezes
Hi all, When I delete a member of a dimension and then process dimension, a pop up openned. In the pop up, it is written that "Validate process dimension, waiting for the server to response". And then nothing happens after 30 minutes.No error, no cha
-
My phone will receive emails but it will not send messages. It says my password is incorrect but doesn't allow me an opportunity to enter it again. Any thoughts?