TP connect to database fails in 4.0B_EXTN
Hi,
When we try to check the TP tools through STMS. It shows that database connect
failed.
On running the TP connect <SID> pf=...., command through the command
line,it also fails.
The 'TP' cannot connect to the database. I have applied the newest
TP available on the SAP service marketplace.
Our System details are as below.
OS - Windows 2003
Database - SQL 2000
SAP Version - 40B
Kernel Version - 40B_EXTN
We have installed this SAP version because we would like to upgrade our
SAP version from 4.0B to ECC 6.0
The error on the running the command is shown as below.
F:\usr\sap\trans\bin>tp connect DEH
This is tp version 252.08.37 (release 40B) for MSSQL database
ERROR: SAP-System not installed properly.
Systems name (DEH) is different from name in TADIR (SAP)
PANIC PANIC PANIC 20061218162044
ERROR: SAP-System not installed properly. Systems name (DEH) is
different from n
ame in TADIR (SAP)
ERROR: EXIT(16) -> process ID is: 4804
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0233
tp finished with return code: 233
meaning:
SAP-System not installed properly (HEAD SYST)
Please can any body help me out and provide with a solution.
Regards,
Anwar
Hi
I think u did not configure the STMS in 000 client after installtion SAP in your system.
Configuring Transport Management System
Logon to 000 client of R/3 system which, is to be designated as Transport Domain Controller.
The TMS enables system administrators and technical consultants centrally manage the transport configuration of multiple R/3 systems.
Transport domain: All R/3 Systems that are planned to manage centrally using TMS form a transport domain.
Transport Domain controller: The R/3 System with the reference configuration is called as the transport domain controller. And all R/3 systems hold copies of this reference configuration.
RFC are generated when TMS is configured for R/3 systems to communicate with all R/3 systems in a domain.
regards
kiran.v
Similar Messages
-
Hi gurues, I'm facing this issue with an IDES on MaxDB with Windows.
System was up and running until someone tries to make an upgrade of the kernel. Since then we can not start our system. we tried to rollback kernel release to the previous one but it didn't work.
When we start our system from MMC console we can see all process in green but work processes are in RUN state and after a few minutes they goes down with the following error
trc file: "dev_w0", trc level: 1, release: "701"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon May 16 23:57:31 2011
B create_con (con_name=R/3)
B Loading DB library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
B Library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' loaded
B Version of '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' is "700.08", patchlevel (0.24)
B New connection 0 created
M sysno 00
M sid SED
M systemid 562 (PC with Windows NT)
M relno 7010
M patchlevel 0
M patchno 32
M intno 20020600
M make: multithreaded, Unicode, 64 bit, optimized
M pid 212
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 212) [dpxxdisp.c 1348]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 22784 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000B2C0050, size: 6607136)
M DpShMCreate: allocated sys_adm at 000000000B2C0050
M DpShMCreate: allocated wp_adm at 000000000B2C2270
M DpShMCreate: allocated tm_adm_list at 000000000B2C7B70
M DpShMCreate: allocated tm_adm at 000000000B2C7BD0
M DpShMCreate: allocated wp_ca_adm at 000000000B86B450
M DpShMCreate: allocated appc_ca_adm at 000000000B871250
M DpShMCreate: allocated comm_adm at 000000000B873190
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000B8F9E20
M DpShMCreate: allocated gw_adm at 000000000B8F9EA0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000B8F9ED0
M DpShMCreate: allocated wall_adm at 000000000B8F9EE0
M
M Mon May 16 23:57:32 2011
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host sirillium1
M
M Mon May 16 23:57:33 2011
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.024) Default value for max. input variables is 2000 (note 655018)
C (0.024) Profile parameter to define max. input variables (note 655018)
C (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C (0.024) Input parameters for SQL statements increased (note 655018)
C (0.018) Create index serial for MaxDB 7.6 (note 1267841)
C (0.018) More trace in case of packed to string conversion error (note 1262799)
C (0.016) R3trans export aborts with signal 6 (note 1262245)
C (0.009) IA64 alignment errors (note 1245982)
C (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
C SQLDBC Library Version : libSQLDBC 7.6.5 BUILD 015-123-202-938
C SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 137]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1203] [dbsh 1203 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10563]
M
M Info for wp 0
M
M pid = 212
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sirillium1_SED_00 on host sirillium1 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon May 16 23:57:33 2011
M * RELEASE 701
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10783
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 212) [dpnttool.c 334]
We check several entries on this SDN site, and look for a lot of notes on the marketplace, and they always are related to default user in xuser files, but our xuser list output is ok. We have a DEFAULT connection to SAPSID user, a DBM connection to CONTROL user and a USERDBA connection.
XUSER Entry 1
Key :DEFAULT
Username :SAPSID
UsernameUCS2:S.A.P.S.E.D. . . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
XUSER Entry 2
Key :c
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
XUSER Entry 3
Key :c_J2EE
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
XUSER Entry 4
Key :w
Username :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
Any idea? we are out of ideas at this moment.
Regards
Edited by: Gustavo Goicochea on May 17, 2011 6:37 PMNatalia, this system was not resored nor copied, it was up and running before kernel update. We did some of the tests you said and someothers, here are some outputs.
We update kernel to release 142
R3trans -d and -x exit with (all with user SIDADM)
SVERS table does exist and belongs to SAPSID
dbmcli on SID>sql_execute select * from domain.tables where tablename='SVERS'
OK
END
'SAPSID';'SAPSID';'SVERS';'';'TABLE';'TABLE';'20100406';'00054637';'20100406';'00054637';'20100406';'00054638';'NO';(null);20000;(null);x'0000000000004842';'NO';'NO';'YES';'NO';(null)
Why it still says that SVERS table does not exist and SQL error 942?
C Now I'm connected to SAP DB
C 00: server1-SID, since=20110518015619, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C *** ERROR => prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS) [
dbsdbsql.cpp 1604]
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS) [dbslsdb.cpp 7253]
C sc_p=000000000CFAECC0,no=0,idc_p=0000000000000000,con=0,act=0,slen=34,smax=256,#vars=0,stmt=0000000002EA0AF0,table=SVERS
C SELECT VERSION INTO ? FROM SVERS ;
B ***LOG BZA=> table SVERS does not exist on database [dblink#4 @ 1301] [dblink 1301 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1515]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10824]
M
Users seem to be ok
dbmcli on SID>sql_execute SELECT username, usermode FROM users
OK
END
'CONTROL';'ADMIN'
'SUPERDBA';'SYSDBA'
'SAPSID';'DBA'
'SAPR3';'DBA'
User SAPR3 does not have anything on database
dbmcli on SID>sql_execute select * from domain.tables where owner='SAPR3'
ERR
-24988,ERR_SQL: SQL error
100,Row not found
Any idea?
regards -
Hello
I have just finished a dbcopy of Maxdb 7.6 to a new system with initilization.i can bring the db online. I have ran the xuser command to fix the db users as below command as per note 39439
i changed them in home dir of sidadm,sqdsid
xuser -U DEFAULT -u SAP<SID>,<password> -d <database_name> -n <database_server> -S SAPR3 -t 0 -I 0 set
c) DBM user: for example, CONTROL.
xuser -U c -u CONTROL,<password> -d <database_name> -n <database_server> -S INTERNAL set
d) SYSDBA user: for example, SUPERDBA.
xuser -U w -u SUPERDBA,<password> -d <database_name> -n <database_server> -S INTERNAL set
But iam having the below error now when trying to bring the SAP system up in dev_w0
C Try to connect (DEFAULT) onconnection 0 ...
C
C Mon Dec 19 21:46:11 2011
C *** ERROR => Connect to database failed, rc = -4008 (POS(1) Unknown user name/password combinati
on)
[dbsdbsql.cpp 137]
B ***LOG BY2=> sql error -4008 performing CON [dbsh#3 @ 1208] [dbsh 1208 ]
B ***LOG BY0=> POS(1) Unknown user name/password combination [dbsh#3 @ 1208] [dbsh 1208 ]
B ***LOG BY2=> sql error -4008 performing CON [dblink#8 @ 433] [dblink 0433 ]
B ***LOG BY0=> POS(1) Unknown user name/password combination [dblink#8 @ 433] [dblink 0433 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1537]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10837]
M
is there something that i missed somewhere?
Any ideas welcomeerpsyscs1:cs1adm 46> xuser list
XUSER Entry 1
Key :DEFAULT
Username :SAPCS1
UsernameUCS2:S.A.P.C.S.1. . . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :CS1
Nodename :erpsyscs1
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
XUSER Entry 2
Key :c
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :CS1
Nodename :erpsyscs1
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
XUSER Entry 3
Key :c_J2EE
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :CS1
Nodename :erpsyscs1
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
XUSER Entry 4
Key :w
Username :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :CS1
Nodename :erpsyscs1
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified> -
Error Connect to database failed : sqlcode=-4008 in dev_w0
Hi all,
I have a testing ABAP ECC5 system (in Windows 2003, MaxDB 7.6 build 35).
After changing default passwords of DB users SAP<SID>, CONTROL, SUPERDBA using DBMGUI, I then run commands below to update new passwords in XUSER entries (according to SAP Note 39439):
- xuser -U DEFAULT -u SAP<SID>,<password> -d <database_name> -n <database_server> -S SAPR3 -t 0 -I 0 set
- xuser -U c -u CONTROL,<password> -d <database_name> -n <database_server> -S INTERNAL set
- xuser -U w -u SUPERDBA,<password> -d <database_name> -n <database_server> -S INTERNAL set
The SAP system now cannot be started successfully. In dev_w0, there is info. like below:
"Connect to database failed : sqlcode=-4008 (Unknown user name/password combination)."
Command "r3trans -d" returns 0.
In SAP Note 39439 I see that maybe I should update info. for OS user SAPService<SID>. But I don't know what "..." means in command "xuser -c <domain>\SAPService<SID> ..."
I searched SAP SDN & SAP Notes, but still cannot fix this.
Please guide me to update XUSER entries after changing passwords of DB users.
Regards,> I have a testing ABAP ECC5 system (in Windows 2003, MaxDB 7.6 build 35).
Just as additional info: your database version is ancient - I suggest upgrading to a newer release.
> In SAP Note 39439 I see that maybe I should update info. for OS user SAPService<SID>. But I don't know what "..." means in command "xuser -c <domain>\SAPService<SID> ..."
The SAP system runs under User SAPService<SID>, you're most likely logged on using <sid>adm, that's why your "R3trans -d" connect is successful.
You have to execute the same command for the entry DEFAULT also for user <DOMAIN>\SAPService<SID>, that's what the dots mean
Markus -
Installation of CM fails(par files deployed but connection to database fail
Hi,
I have just installed CM EP6 SP2 on an old sandbox system (which has been upgrade from SP0 I believe), and I have some problems. The installation went fine untill I got the error message "CJS-00276 The upgrade failed. The installation report file cf_installation.report does not exist. Check the log files under the server directory and, if necessary, contact your local support center." But I, at least now, find the file but this is probably from my installation of CM SP2 Patch4 and CM SP2 Patch4 hf8 (I was hoping the installation of them would clear the problem).
I believe the problem is that there are missing some files under the SAPPRT share (
server\SAPPRT\EPS1\global\config\cm), this because it was giving some error messages earlier about it. I was running the portal under localsystem user, which hasn't got the possiblity to have access to share's. (I would get an exception about access denied from the file system when starting it up, but after changing the user I don't).
Under
server\SAPPRT\EPS1\global\config\cm the portal has created the following folders:
Backups
config
etc
reports
<b>Are there any one missing ?</b>
(to resolve the problem I tried create the following folders, but still the same problem:
system/updateQueue/events
system/command
system/deployment/archives
system/deployment/upgrades
utilities/connection_pools/db_type/default)
The property files in \usr\sap\EPS1\j2ee\j2ee_01\cluster\server\services\servlet_jsp\work\jspTemp\irj\root\WEB-INF\portal\system\cm
look correct, and also the file under portalapps/com.sap.portal.km.application (or something).
When I went into KM configuration in the portal, I noticed there were no JDBC connection pools, and I therefore created two as described in http://help.sap.com/saphelp_ep60sp2/helpdata/en/eb/d10ef2b6a311d5993900508b6b8b11/content.htm
But that is something which the installer should have done for me. (and still the connection pools won't start)
The main error message I get at startup is the following:
Jun 28, 2005 4:45:17 PM com.sapportals.config.queue.UpdateQueueService [System_Thread_12] Warning": There was a problem initializing the queue service for config manager : configuration plugin for queue service not found (/system/updateQueue/events)
java.lang.RuntimeException: Failed to init. connection pool configuration: Failed to init. connection pool configuration: missing configurable /cm/utilities/connection_pools/db_type/default
at com.sapportals.wcm.util.jdbc.connectionpool.JDBCConnectionPoolManager.initConfig(JDBCConnectionPoolManager.java:566)
at com.sapportals.wcm.util.jdbc.connectionpool.JDBCConnectionPoolManager.getInstance(JDBCConnectionPoolManager.java:99)
at com.sap.workflow.util.config.WorkflowProperties.initProperties(WorkflowProperties.java:188)
at com.sap.workflow.util.config.WorkflowProperties.<init>(WorkflowProperties.java:48)
at com.sap.workflow.util.config.WorkflowProperties.getInstance(WorkflowProperties.java:56)
at com.sap.workflow.es.portal.WFPortalService.init(WFPortalService.java:74)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstance(PortalServiceItem.java:678)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.createServiceInstance(PortalServiceItem.java:519)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:875)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1470)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1426)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.startNonCoreApplications(PortalAppBroker.java:1383)
at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:371)
at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:55)
at com.sapportals.portal.prt.dispatcher.PortalInitializer.<init>(PortalInitializer.java:129)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer.run(Dispatcher.java:160)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:358)
at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher.java:40)
at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispatcher.java:113)
at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:391)
at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:3284)
at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:2542)
at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.createContext(ServletsAndJspImpl.java:765)
at com.inqmy.services.servlets_jsp.server.WebApplicationStarter.run(WebApplicationStarter.java:57)
at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
at java.security.AccessController.doPrivileged(Native Method)
at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
java.lang.NullPointerException
at javax.naming.NameImpl.<init>(NameImpl.java:250)
at javax.naming.CompositeName.<init>(CompositeName.java:223)
at com.inqmy.services.jndi.implclient.OffsetClientContext.parse(OffsetClientContext.java:129)
at com.inqmy.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:200)
at javax.naming.InitialContext.lookup(InitialContext.java:345)
at com.sap.workflow.util.ejbfactory.EJBFactory.getUserTransaction(EJBFactory.java:282)
at com.sap.workflow.es.portal.WFPortalService.init(WFPortalService.java:83)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstance(PortalServiceItem.java:678)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.createServiceInstance(PortalServiceItem.java:519)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:875)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1470)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1426)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.startNonCoreApplications(PortalAppBroker.java:1383)
at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:371)
at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:55)
at com.sapportals.portal.prt.dispatcher.PortalInitializer.<init>(PortalInitializer.java:129)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer.run(Dispatcher.java:160)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:358)
at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher.java:40)
at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispatcher.java:113)
at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:391)
at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:3284)
at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:2542)
at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.createContext(ServletsAndJspImpl.java:765)
at com.inqmy.services.servlets_jsp.server.WebApplicationStarter.run(WebApplicationStarter.java:57)
at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
at java.security.AccessController.doPrivileged(Native Method)
at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
And if I go to content administration->KM content I get the following stack trace:
java.lang.RuntimeException: Failed to init. connection pool configuration: Failed to init. connection pool configuration: missing configurable /cm/utilities/connection_pools/db_type/default
at com.sapportals.wcm.util.jdbc.connectionpool.JDBCConnectionPoolManager.initConfig(JDBCConnectionPoolManager.java:566)
at com.sapportals.wcm.util.jdbc.connectionpool.JDBCConnectionPoolManager.getInstance(JDBCConnectionPoolManager.java:99)
at com.sapportals.wcm.repository.runtime.CmSystemInfo.createDBConnection(CmSystemInfo.java:221)
at com.sapportals.wcm.repository.runtime.CmSystemInfo.checkDB(CmSystemInfo.java:138)
at com.sapportals.wcm.repository.runtime.CmSystem.startUp(CmSystem.java:226)
at com.sapportals.wcm.repository.runtime.CmSystem.getInstance(CmSystem.java:161)
at com.sapportals.wcm.repository.runtime.CmAdapter.getResource(CmAdapter.java:81)
at com.sapportals.wcm.portal.service.KMServiceImpl.afterInit(KMServiceImpl.java:260)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstanceStep2(PortalServiceItem.java:736)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:909)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1470)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1426)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.startNonCoreApplications(PortalAppBroker.java:1383)
at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:371)
at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:55)
at com.sapportals.portal.prt.dispatcher.PortalInitializer.(PortalInitializer.java:129)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer.run(Dispatcher.java:160)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:358)
at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher.java:40)
at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispatcher.java:113)
at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:391)
at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:3284)
at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:2542)
at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.createContext(ServletsAndJspImpl.java:765)
at com.inqmy.services.servlets_jsp.server.WebApplicationStarter.run(WebApplicationStarter.java:57)
at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
at java.security.AccessController.doPrivileged(Native Method)
at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
com.sapportals.wcm.repository.ResourceException: CM Startup failed: CM startup failed: Failed to init. connection pool configuration: Failed to init. connection pool configuration: missing configurable /cm/utilities/connection_pools/db_type/default
at com.sapportals.wcm.repository.ResourceException.fillInStackTrace(ResourceException.java:401)
at java.lang.Throwable.(Throwable.java:85)
at java.lang.Exception.(Exception.java:33)
at com.sapportals.wcm.WcmException.(WcmException.java:78)
at com.sapportals.wcm.WcmException.(WcmException.java:74)
at com.sapportals.wcm.util.content.ContentException.(ContentException.java:42)
at com.sapportals.wcm.repository.ResourceException.(ResourceException.java:251)
at com.sapportals.wcm.repository.runtime.CmAdapter.makeStartupResourceException(CmAdapter.java:397)
at com.sapportals.wcm.repository.runtime.CmAdapter.getResource(CmAdapter.java:84)
at com.sapportals.wcm.portal.service.KMServiceImpl.afterInit(KMServiceImpl.java:260)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstanceStep2(PortalServiceItem.java:736)
at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:909)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1470)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1426)
at com.sapportals.portal.prt.core.broker.PortalAppBroker.startNonCoreApplications(PortalAppBroker.java:1383)
at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:371)
at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:55)
at com.sapportals.portal.prt.dispatcher.PortalInitializer.(PortalInitializer.java:129)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer.run(Dispatcher.java:160)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:358)
at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher.java:40)
at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispatcher.java:113)
at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:391)
at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:3284)
at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:2542)
at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.createContext(ServletsAndJspImpl.java:765)
at com.inqmy.services.servlets_jsp.server.WebApplicationStarter.run(WebApplicationStarter.java:57)
at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
at java.security.AccessController.doPrivileged(Native Method)
at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
javax.servlet.ServletException: CM Startup failed: CM startup failed: Failed to init. connection pool configuration: Failed to init. connection pool configuration: missing configurable /cm/utilities/connection_pools/db_type/default
at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:111)
at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:300)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:190)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:209)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:576)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:300)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:190)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:669)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:209)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:532)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:415)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:149)
at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:832)
at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:665)
at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:312)
at com.inqmy.services.httpserver.server.Response.handle(Response.java:173)
at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1245)
at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
at java.security.AccessController.doPrivileged(Native Method)
at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
I appreciate any help !
PS sorry for the unstructured post, but I am hungry and want to go home now.The files under the SAPPRT share had somehow failed (some where there, but a lot of the important ones where missing).
I found out that these files were in .configarchive files in the par files to be deployed, and manually unpacked them using these two commands
$ for file in `ls -1 .par` ; do unzip $file ".configarchive" -d extracted >> logfile.txt ; done
$ for file in `ls -1 *.configarchive` ; do unzip -o $file -d extracted >> logfile.txt ; done
Afterwards I had to make some tiny customization (search for %[a-zA-Z]% , especially for the connection pools.
Then a restart, and most of it seems to work (the system will not live much longer so that is acceptable) -
Can anybody please tell me why my program wo'nt connect to the database I specified (Start, Settings, Contrl Panel, Adminstr Tools, Data sources etc done beforehand)?
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.Statement;
public class Databasis
public static boolean loadOBDC()
try
Class.forName("sun.jbdc.obdc.JbdcObdcDriver");
System.out.println("Connected tot data souce.");
return true;
catch (Exception e)
System.out.println("Not connected tot data source.");
return false;
I keep getting my "Not connected to data source" message. Is ther some specific step I overlooked perhaps when I tried to set up the OBDC drivers?
Please help.
Thanks,
Erna@montClass.forName("sun.jbdc.obdc.JbdcObdcDriver");this is your problem
it has to be jdbc.odbc.JdbcOdbcDriver
have fun...
hey don't forget to connect to the database
Connection... that only you load the class, you dont connect
i will give you a link in a minute -
Remote connection to database fails
Hi,
I İnstalled oracle 10g on my computer which is also my server on win XP .The problem is I cannot connect db from outside (WAN) while I could connect to it via LAN.
I used " http://jens:5500/em " to connect via LAN but it did not worked when i tried to connect outside.Then I tried to ping the computer it says request timed out.What can I do to handle this problem.
Best,Ask your network administrator.
If you cannot communicate via ICMP, it is very likely that you will not be able to establish a TCP connection.
Without TCP, you cannot establish an Oracle connection.
Make sure that you have nor firewalls or proxy servers in between, or use Oracle Connection Manager on the proxy server.
Yours,
Laurenz Albe -
Failed to connect to database ONLY at the first time
Hi all, I installed Discoverer 10g version and I'm using an Application User to connect to the server where's the Db is installed.
Every time I try to connect to the server with Discoverer Viewer or Desktop I have a curious behavior....
ALWAYS but ONLY the first time I try to connect I have the following error :
- Failed to connect to database - Unable to connect to Oracle Applications database: invalid username/password.
If I try to re-connect again the second time it works perfectly !!....so, I think, there's nothing related with my .dbc file.
I tried also to write the ':' at the end of the user name....but it didn't work.
Into the pref.txt file doesn't exist a parameter like DefaultUserTypeIsApps to set....
Anybody have had the same "strange" behavior and found a solution or workaround ?
Thanks in advance
AlexThanks for your answers first of all !
At the end I found the solution looking at the Note:307167.1 on Metalink:
Discoverer Plus 10.1.2 Fails with ORA-1017 Error On First Login Attempt Then Works On Second Attempt
This note is very useful but into the solution the point 3 is not correct !
3. Modify the servername parameter to indicate the fully qualified servername.domain
Example:
An httpd.conf setting of: ServerName my_servername.mydomain.com should match a Discoverer Plus URL like http://my_servername.mydomain.com:7778/discoverer/plus
I had this problem both with Viewer and Plus...so instead to change the server name parameter (into the Apache/Apache/conf/httpd.conf file) with my complete URL (http://gnvdev.ote.gr:7779/discoverer/plus), I just write my right server name:
Example
After the installation of the Discoverer 1og server, into the httpd.conf file it was written automatyically: ServerName gnvdev
I just modified in ServerName gnvdev.ote.gr and both Viewer and Plus started to work perfectly at the first time.
I hope that this hint will be useful for you and others in the Discoverer forum !!!
Best Regards
Alex -
Connection test to database failed: could not connect to server
I restarted one of my HPOV NNMi 9.23 servers this morning and NNMi is no longer loading. I am seeing the following errors in the logs indicated:
/var/opt/OV/log/nnm/public/nmsdbmgr.log
04/06/2015 09:28:05 AM Connection test to database failed: could not connect to server: Connection refused
Is the server running on host "127.0.0.1" and accepting
TCP/IP connections on port 5432?
/var/opt/OV/log/nnm/public/postgres.log
2015-04-06 09:25:55.312 EDT: :8580:0LOG: could not translate host name "localhost", service "5432" to address: Name or service not known
2015-04-06 09:25:55.312 EDT: :8580:0WARNING: could not create listen socket for "localhost"
2015-04-06 09:25:55.312 EDT: :8580:0FATAL: could not create any TCP/IP sockets
I checked /etc/hosts and found the following entry:
#; Local
127.0.0.1 localhost
From the command line I can ping localhost with no issue. Not sure why NNMi is not starting at this point.
This question was solved.
View Solution.I also attempted to do a reset using nnmresetebdb.ovpl. I recieved the following:
Attempting to reset the embedded database...
Starting nmsdbmgr process for database reset...
nmsdbmgr process did not restart successfully - please try reset again.
When I run ovstart -c I receive the following:
Name PID State Last Message(s)
OVsPMD 29831 RUNNING -
pmd 29832 RUNNING Initialization complete.
nmsdbmgr - NOT_RUNNING - Exit(1)
ovjboss - UNSTARTABLE -
nnmaction - UNSTARTABLE -
ovspmd: Attempt to start HP OpenView services is complete.
I definitely need some help with this please!
Thanks! -
DBA studio: Error add/connect database "Failed to parse tnsnames.ora file"
I have Oracle (version 8.1.7) installed in my XP machine and when I try to (having chosen "Launch DBA Studio standalone") to open a connection I get:
"Failed to parse tnsnames.ora file
ERROR: 100 -- NLNV-NLNV String Format Error".
Also got this when I tried to manually add a database to a tree.
I can access the databases listed in my tnsnames.ora using SQL Plus with no error.
This is my tnsnames.ora.
# TNSNAMES.ORA Network Configuration File: C:\oracle\ora81\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.xx.yy.GE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = MyMachine3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = buch3ora)
(PRESENTATION = http://admin)
EXTPROC_CONNECTION_DATA.xx.yy.GE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
MyOra3.xx.yy.GE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = MyMachine3)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ora3)
OORCL.xx.yy.GE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 3.4.55.66)(PORT = 1521))
(CONNECT_DATA = (SERVICE_NAME = oorcl))
Does anybody have any idea what is wrong? Thanks a lot. ChangsongJust found out this IS a string error in my Tnsname.ora. What i did is deleting all the entries in my tnsname.ora, and start adding each one back. I found one particular entry is responsible for the error. This is the old text
serv32.xxx.ge.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (COMMUNITY = TCP)(PROTOCOL = TCP)(HOST = sevr32.xxy.ge.com)(PORT = 1521))
(CONNECT_DATA = (SID = atmo32))
just looking by itself I can't see anything wrong. I just formatted it a little, making it looked like the other one that is working
serv32.xxx.ge.com =(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = TCP)
(PROTOCOL = TCP)
(HOST = sevr32.xxy.ge.com)
(PORT = 1521)))
(CONNECT_DATA=
(SID = atmo32)))
and now it works fine. I Really can't tell the difference, except that some words were moved to the other line. What puzzled me is that the same old tnsname.ora worked in almost all the other circumstances, like sql plus, and other database enginee. But it is just not good enough for dba studio?
I admit I probably should have used the network utility to add a connection to avoid this type of format error.
Anyhow, I'm glad it is solved. by the way, the symjct.dll mentioned in the previous post should be symcjit.dll. I guess he mispelled the name. I renamed it to symcjit_old.dll and now the java error was gone. So that is another gain from this post. Thanks Joel for all the information. -
HI Experts,
Today i got this alert from oem grid during RMAN bakcup of the PROD database.when i try to connect the database i am able to get into to the DB successfully with out any issues.
But i am not sure why this error has come and resone behind that.Please advise.
From: Oracle OEM [mailto:[email protected]]
Sent: Tuesday, February 22, 2011 11:21 PM
To: DBA_GROUP
Subject: EM Alert: Critical:PROD.test.edu.au - Failed to connect to database instance: ORA-00257: archiver error. Connect internal only, until freed. (DBD ERROR: OCISessionBegin).
Target Name=PROD.test.edu.au
Target type=Database Instance
Host=delhi.win.test.edu.au
Occurred At=Feb 22, 2011 11:20:33 PM EST
Message=Failed to connect to database instance: ORA-00257: archiver error. Connect internal only, until freed. (DBD ERROR: OCISessionBegin).
Severity=Critical
Acknowledged=No
Notification Rule Name=Database Availability and Critical States
Notification Rule Owner=SYSMAN
when i check the alertlog file i could see the following
Tue Feb 22 23:01:36 2011
Starting control autobackup
Control autobackup written to DISK device
handle '/oracledb/rman_backup/PROD/control_c-197342269-20110222-01'
Tue Feb 22 23:22:42 2011
Errors in file /oracle/admin/PROD/udump/hubprd_ora_27069.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-01438: value larger than specified precision allowed for this column
ORA-06512: at line 2
PLease let me know the cause of the issues and solution to overcome this issues.
Regards,
SalaiIt would appear that your archive location is full. If it is full, then try to get some more free space there by either deleting the old archives or specifying a different location.
I don't see any mention of a flash recovery area in the log message, but you may also want to confirm that you have reached your space allocated to the FRA. -
Connect to database instance PRD Failed
Hi,
We had refreshed our SCM quality system last month with production data, since then we are facing problem in BR connect operations like CheckDB, Verif DB, cleanup logs and update stats . When we schedule these operation using DB13 then we get an error "Connect to database instance PRD failed", but when try to run this manually by clicking excute immediately button then these operations complete succesfully.
Can you please help on this ?
Our version details are as below.
SCM 5.0
Oracle Release 10.2.0.2.0
Thanks,
ChetanProblems with the OPS$ mechanism? Check SAPNotes 400241 and 50088...
Also check the output of
> R3trans -d
use <sid>adm on os level...
GreetZ, AH -
FCS DB backup failed w/error: "couldn't connect to database "template1"
Hi,
I am testing two different FCS systems (on two different machines, the same config).
I wanted to backup FCS on one machine manually and it was not possible. I tried to do the same on the second machine and it was also not possible. I checked logs for automatic backup on both machines and everything worked until 22nd of April.
I am not sure if I did download some update, but I am sure I didn't change anything on both machines nor FCS settings.
I got this error message when I tried to backup:
*Backup failed: pg_dumpall exited with code 1.*
*Checking for other backup processes...*
*Starting database backup to path '/Volumes/ProxyA/FCSBackups/Final Cut Server DB Backup on fcserver-1 at 2009-04-23 0000.zip'...*
*pg_dumpall: could not connect to database "template1": could not connect to server: Connection refused*
*Is the server running locally and accepting*
*connections on Unix domain socket "/tmp/.s.PGSQL.5433"?*
Both systems work normally. I "just" can't backup the DB.
What happened ?
Thank you.Hi Sam,
Sometimes it is only because you have not set the environment correctly (ORACLE_HOME, ORACLE_SID).
Is your TNSNAMES.ORA correct?
If you do a "ps -ef |grep oracle" you should get a list of processes. Make sure you see PMON and SMON processes as well as the LSNR processes.
If you don't see the LSNR processes start the listener.
If this don't help try to start the DB manually and check with tsnping, otherwise come back again with mor info.
regards
Wolfgang -
Several days ago, I created a workbook with 5 worksheets in Discoverer Plus 9.02 against a 10g database. Everything worked fine until today when I tried to re-saved the workbook into the database. I saw the error message that said "Failed to connect to database". When I hit the OK button in the error message dialog box, my sessions were terminated. Again, the error happened whenever I tried to re-save the workbook into the DB. I didn't see such error before.
Hi Andy,
We are having a similar issue. We recently upgraded from 4.1.48 to 10.1.2.48.18. We are using Plus/Viewer. Imported workbook has several worksheets. Query runs but then receive an error stating 'Contact with the server has been lost...' I set the row retrievel to 20 rows but still get this error message.
Have you found a resolution to this problem?
Thanks in advance for any help.
Barbara -
OEM Grid "Failed to connect to database instance: ORA-03135
Hello all,
Did anyone know why we get the error in the OEM grid:
Failed to connect to database instance: ORA-03135: connection lost contact (DBD ERROR: OCISessionBegin).
We checked the listener and it is running fine. Can someone advice where to look? Thanks.Hello,
1. I tried to ping to the grid control server, and it was successful. However when reviewing the emagent.trc trace file, I noticed the following error:
SQL = "/* OracleOEM */ BEGIN :succ_sub := 0; dbms_aqadm.enabl"...
LOGIN = dbsnmp/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=mddbbanner8-vip)(PORT=1521))(CONNECT_DATA=(SID=PROD4)))
2009-01-13 10:44:31 Thread-4113849248 ERROR recvlets.aq: Error enabling user dbsnmp for aq agent mddbbanner8_3872_PROD4 on PROD.loe.corp_PROD4: ORA-06550: line 1, column 65:
PLS-00201: identifier 'DBMS_AQADM' must be declared
ORA-06550: line 1, column 65:
PL/SQL: Statement ignored
2009-01-13 10:44:31 Thread-4113849248 ERROR recvlets.aq: unable to create subscription on oracle_database PROD.loe.corp_PROD4
2. In the emdctl.trc trace file, I see these errors:
2009-01-09 15:54:26 Thread-4136655072 WARN http: snmehl_connect: connect failed to (mddbbanner8:3872): Connection refused (error = 111)
2009-01-09 15:54:26 Thread-4136655072 ERROR main: nmectla_agentctl: Error connecting to https://mddbbanner8:3872/emd/main. Returning status code 1
3. Anyone experienced the same errors from 1 and 2 above? Any solution to this issue?
Thanks.
Maybe you are looking for
-
Control on the release of the back ground jobs
Hello experts, We have a requirement to process a set of jobs in sequence based on a sequence number. It means the first set of jobs with sequence number 1 will all be released at once and they have to get finished for the next set of jobs with the s
-
Photosmart 7520 Horrible Print Quality
I have purchased HP printers for years and have always considered them excellent and reliable products. About a year ago I purchased a Photosmart 7520. This has turned out to be the worst printer I have ever owned.The print quality is terrible and un
-
I just installed 10.4.11. The dashboard icon is on the dock, but when I click on it, the screen dims but no dashboard items appear. It used to work fine before the upgrade. Any ideas?
-
I have not been able to get WiSM controllers on 4.x code to detect a wire-side rogue with open auth (Cisco AP and Apple Airport Express). It did find the open Airport AP once when running 3.x code, but has not since the upgrade. Has anyone succcessfu
-
Having problems with the standard Photos app. A few weeks ago I noticed when I tried scoliing through photos (via the general view that displays them in rows) it would quit whenever I got to a particular section. So then the only way to view all of