"tp import all" runs 24 times faster than "tp import TR " for long queue?

After a test upgrade to ECC 6.0, I processed 1200 individual transports in 12 hours. When I rebuilt the queue of 1200 transports and processed "tp import all", it completed in 30 minutes.
Should I expect "tp import all" to process 24 times faster than individual imports?
800 transports were client independent (code) and 400 transports were client-specific (configuration).
What run times have you seen?
What problems with "tp import all" have you seen?
Best regards,
Gary Sherwood

Hi Gary
You don't know the 800 transports which are wating for the import, what could be render your system in case of import all. so, that's why , i will prefer to you import individual request instead of import all.
offcourse, Import all are faster than the individual because it prepare all steps once to start import,
Regards
Anwer Waseem

Similar Messages

Mencoder H.264 20 times faster than Compressor 2

I tested mencoder with compressor running with 5 G5s. the H.264 implementation of mencoder was four times faster than the 5 dual core quads clustered with compressor two and queermaster . my single computer alone with just a dual 2 ghz processor encoded a movie 20 times faster than compressor with Queerrmaster on this same machine.
compressor costs more than mencoder(free in DVision). to get compressor you have to get an expensive Pro app.
What's wrong with this picture?

Well, I have heard this lament before with the G5s, and all I can say is that I guess Apple is slowly starting to drop support for the PowerPC generation (it was inevitable). I assume you've upgraded to 3.0.1?
As for Motion 3 (and someone correct me here if I am wrong), I believe it's slower because of the full 3D integration. Whether or not you have a lot of 3D aspects, I think it still calculates for it, causing your response and render time to decrease.

If i export my project, it runs much faster than in the canvas. How can I fix that?

If i export my project, it runs much faster than in the canvas. How can I fix that?
I'm from germany, sorry for my english!

When you export your project, it is "compiled" into video format. Any player will play it at its frame rate.
Motion is a compositing application. It has to make many more times the calculations needed to animate everything and 90% of the time, it's just not possible for Motion to keep up with "real time". It's to be expected. Learning to live with that fact will make life a lot easier for you, I promise.
There are a few things you can do to help speed up Motion:
Reduce temporary play ranges to no more than about 5 seconds at a time. You can move the Play Range In and Out markers from section to section. Motion does all of its real time rendering in RAM. The longer the play range, to more it has to work managing that memory.
Remove Preview Icons from the Layers list ( View menu > Layers Columns > Preview will toggle the views)
When you play your animation, turn off on screen guides: (command - / will toggle onscreen guides)
In Motion 5, reducing the quality of playback from the Render menu does not make a lot of difference anymore, so you might as well keep the default settings of Dynamic, Full and Normal on. However, Motion Blur, Frame Blending, Field Rendering, as well as the lighting options will affect playback, sometimes by quite a lot. So if you have Lights, turning off Lighting, Shadows, and Reflections will get back a lot of real time playback speed (just remember to turn on all that you need before rendering, or these things will be left out of the export!)
HTH

Playback speed in Sample Editor window many, many times faster than track (at correct speed) in arrange area. How do I sync Sample Editor playback speed to correct speed/tempo in arrange area? Track is spoken word.

Playback speed in Sample Editor window many, many times faster than track (at correct speed) in arrange area. How do I sync Sample Editor playback speed to correct speed/tempo in arrange area? Track is spoken word. Sample Editor playback sounds like Alvin on a meth binge. Spoken phrase is generated from Textspeech. Textspeech can export files as WAV files or MP3 files. Perhaps a clue?: When exported Textspeech WAV file is dragged and dropped into track in arrange area of new project, it exhibits same supersonic speed. When Textspeech file is exported as MP3 file and dragged and dropped in arrange area track, it plays at correct speed.

Thanks Erik,
If nothing else, this huge list of updates and fixes, shows clearly that the Logic Dev team is working hard on fixing and improving LPX to a major degree.... and from the list of fixes done.. show they do read the bug reports submitted!
As an aside....
I recall how all the 'naysayers' prior to LPX (and in some cases, since...) were proclaiming how Logic was dead, the team was being disbanded, we won't see any further development, the Dev team doesn't listen or care... and so on....... I wonder where those people are now?

Web Report - ABAP Vs JAVA engine - ABAP 10 times faster than JAVA

Guys,
I want to share what we found in our project and see if any of you have insights
into our findings.We are on NW2004S SP14 and we are moving to SP15 in a couple of weeks.We created query, developed WAD for it and executing the WAD takes for this query takes 22 secs (Vs 2 secs using ABAP) the query output has 1 million records and most of the actions we take from that point on like right click on account takes 20 secs (Vs 0 secs/instant using ABAP) , drilldown to level 4 of account hierarchy takes 58 secs (Vs 5 secs using ABAP), drilldown on cost center level 6 takes 42 secs (Vs 4 secs using ABAP), , right click on cost center takes 32 secs (Vs 3 secs using ABAP), ..etc.
Basically every action we take in the JAVA report takes an average of 28 secs.There are 9 aggregates built on the cube that are barely hit by this query but the same query performing same actions with same selections hit the aggregates many many times.The questions I have is why is ABAP so fast compared to JAVA ? What is true explanation behind this behavior ? What are the dis-advantages by using ABAP engine ? Users are loving the performance and features of ABAP while they weren't really on board with the original JAVA report (as it was slow). ABAP is sure enough 10 times faster than JAVA. Query/Query Properties are exactly the same in ABAP and JAVA.Please explain.
Cheers
RT

Hi All,
Thanks to all you for your responses. I appreciate your time for going through my questions and coming forward to express your views.
However, I was looking for more specific "factual" answers. My question is "What does a client miss if they opt to install only ABAP based BI 7.0, as against JAVA Based BI 7.0"
thanks again.
Naga

Any Program to sort by keywords faster than CS-PS6-Bridge For Keyword Search?

To sort by keywords in (CS-PS6)-Bridge one has to group all your folders under one overall folder. Then when you search by keywords (CS-PS6)-Bridge opens up all the photos in Bridge which take avery long time. Since Lightroom Smart Previews open up smaller files will it open up all ones pictures faster? and then can it sort by keywords.
I am assuming Lightroom smart preview opens up a larger size file than CS6-PS-6-Bridge and thus is even slower.
So the question becomes are there Any Program to sort by keywords faster than CS-6-Bridge For Keyword Search? i.e A program that doesn't have to open up a file to look at keywords or a way to open smaller thumbnails in Bridge?

Really?
You mean you can't just click on the Magnifying Glass in the Search Box like I can?
Uploaded with plasq's Skitch!
And then Select Rating?
Uploaded with plasq's Skitch!
And then click on the Third Dot and it will become a Star?
Uploaded with plasq's Skitch!
Or even use a Smart Album? File -> new Smart Album: My Rating -> is -> And there's click on the third dot to make it a star trick again?
Regards
TD

Run time error while doing VL10B transaction for STO

Dear All,
We are facing problem of run time error while creating Delivery (VL10B) for STO .We have two company codes .For one company code its working fine .But we are trying for another company code ,this error coming.error detals
Error in the ABAP Application Program
The current ABAP program "SAPLV05I" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not cau
     in
    procedure "SD_PARTNER_UPDATE" "(FUNCTION)", nor was it propagated by a RAI
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
Kindly suggest as to how to resolve this asap.
regards
umesh

These Kind of Errors Generally Occor for the wrong maitnaince of the partner functions. If you are using any user exits to detremine the partner functions. check the logic in that routine.
Because we do frequently get this error, but only if we hae not maintained as per the rule written in the user exit..
The USer exits for partner Determiantion to check is Function Module EXIT_SAPLV09A_003. THis gets activated, if you have give the source parner function as "X/Y/Z" in your partenr determiantion procedures.

TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

I have edited a movie in Final Cut Pro and the video has been smooth all the time.
Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
What is wrong? All the sudden.

We need info, info, info!
What version of FCP X?
Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
Try exporting a master file and see if the video is ok.
Also, keep Activity Monitor open and see how much memory pressure you've got.

Why can't I get my iphone to import all the email address when it imports from address book? It syncs all other info. It make we want to go back to my blackberry

Why can't I get my iphone to import all the email address when it imports from address book? It syncs all other info.
I tried over and over, there must be something I need to change.
It make we want to go back to my blackberry

Usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Backing up, updating, and restoring iOS software

[Solved] ADF BC - PL/SQL block 6 times faster than CreateRow/InsertRow

THE ENVIRONMENT:
- JDeveloper 10.1.2.0.0
- Oracle 9.2.0.8.0
THE PROBLEM:
I found one of my pages in an ADF BC Web Application to be quite slow. After some profiling, I found a significant bottleneck in a loop which inserts approximately 270 rows in a table (only inserts into the table using insertRow). Would there be an improvement if we rewrite the transaction in PL/SQL code? To find out, I came up with the following simple test case:
1) Table
create table TES_FSOLICFONDO
ID_SOLICITUD NUMBER not null,
A_PAIS VARCHAR2(2),
C_IDEMPRESA NUMBER,
A_CODMONEDA VARCHAR2(3),
C_LOCAL NUMBER,
D_FECSOLICIT DATE,
C_IDBILLMONE NUMBER not null,
M_MONTO NUMBER,
A_CREADOPOR VARCHAR2(30),
D_CREACION DATE,
A_MODIFPOR VARCHAR2(30),
D_MODIF DATE);
alter table TES_FSOLICFONDO
add primary key (ID_SOLICITUD);
create index IND_TES_FSOLICFONDO_01 on TES_FSOLICFONDO (C_IDBILLMONE, C_LOCAL, D_FECSOLICIT);
create index IND_TES_FSOLICFONDO_02 on TES_FSOLICFONDO (C_IDEMPRESA, A_CODMONEDA, C_LOCAL, D_FECSOLICIT,C_IDBILLMONE);
2) Sequence
create sequence SEQ_TES_FSOLICFONDO
minvalue 1
maxvalue 999999999999999999999999999
start with 1
increment by 1
cache 2;
3) ADF BC
- Create a Business Components Project with a BC package
- Create new Entity Object based on the previous table, with standard wizard settings (this will be named TesFsolicfondo)
- Create new View Object linked to previous Entity Object, with standard wizard settings (this will be named TesFsolicfondoVO).
- Create an Application Module named AMTESAsignaSuperAvance, and include the previous View Object in the Data Model
4) The test case
- Create a test() method in the AMTESAsignaSuperAvanceImpl class as follows:
public void test() throws Exception
TesFsolicfondoVOImpl solVO = getTesFsolicfondoVO1();
TesFsolicfondoVORowImpl r = null;
for (int i = 0; i < 270; i++)
r = (TesFsolicfondoVORowImpl) solVO.createRow();
Sequence seq = new Sequence("SEQ_TES_FSOLICFONDO",this);
r.setIdSolicitud(new Number(seq.getData().toString()));
r.setAPais("PE");
r.setCIdempresa(new Number(637292));
r.setACodmoneda("USD");
r.setCLocal(new Number(388));
r.setDFecsolicit(new Date("2006-04-07"));
r.setCIdbillmone(new Number(116));
r.setMMonto(new Number(0));
r.setACreadopor("10000003480");
r.setDCreacion(new Date("2006-04-03"));
solVO.insertRow(r);
getTransaction().commit();
- Create a test.jsp page including the following code within a scriptlet:
AMTESAsignaSuperAvanceImpl am = null;
try
am = (AMTESAsignaSuperAvanceImpl) Configuration.createRootApplicationModule("cl.falabella.fpi.tes.bc.AMTESAsignaSuperAvance","AMTESAsignaSuperAvanceLocal");
am.test();
catch (Exception e)
am.getTransaction().rollback();
finally
Configuration.releaseRootApplicationModule(am,true);
- Create an equivalent PL/SQL block as follows:
BEGIN
FOR I IN 1..270
LOOP
INSERT INTO TES_FSOLICFONDO (ID_SOLICITUD, A_PAIS, C_IDEMPRESA, A_CODMONEDA, C_LOCAL,
D_FECSOLICIT, C_IDBILLMONE, M_MONTO, A_CREADOPOR, D_CREACION)
VALUES (SEQ_TES_FSOLICFONDO.NEXTVAL, 'PE', 637292, 'USD', 388, TO_DATE('07-04-2006', 'DD-MM-YYYY'), 116, 0,
'10000003480', TO_DATE('03-04-2006', 'DD-MM-YYYY'));
END LOOP;
COMMIT;
END;
THE RESULTS:
The PL/SQL block was executed on a standard SQL* Plus window, and the test() method within the AM was called from the test.jsp page.
The PL/SQL block takes 1125 milliseconds in my setup, the test() method within the AM takes 6017 milliseconds, so PL/SQL is about 6 times faster in this test.
THE QUESTION:
Is this supposed to be this way? I want to avoid creating a PL/SQL package, I would rather use the ADF BC framework throughout the application. Would someone kindly point out any configuration issues I may have missed that will improve the BC performance?

Hello Jan,
Thanks for the tip, good to be born again as a name instead of a number.
I omitted the code used for timing, but here goes:
test.jsp:
java.util.Date d1 = new java.util.Date();
AMTESAsignaSuperAvanceImpl am = null;
try
am = (AMTESAsignaSuperAvanceImpl) Configuration.createRootApplicationModule("cl.falabella.fpi.tes.bc.AMTESAsignaSuperAvance","AMTESAsignaSuperAvanceLocal");
am.test();
catch (Exception e)
am.getTransaction().rollback();
finally
Configuration.releaseRootApplicationModule(am,true);
java.util.Date d2 = new java.util.Date();
System.out.println("Time (ms) = " + Double.toString(d2.getTime()-d1.getTime()));
PL/SQL:
I use a tool called "PL/SQL Developer". It has a "Command Window" with a user interface which is extremely similar to SQL* Plus. After running the PL/SQL code, it reported "PL/SQL procedure successfully completed in 1.125 seconds".
From the tool documentation:
The Command Window
The Command Window allows you to execute SQL scripts in a way that is very much similar to Oracle's SQL*Plus. To create a Command Window press the New button on the toolbar or select the New item in the File menu. A Command Window is created and you can type SQL and SQL*Plus commands like you are used to, without leaving PL/SQL Developer’s IDE.
Regards
Rodrigo

HT1222 So do you all use timer more than alarm clock for iPhone 5? pane?

I find myself using alarm clock all the time and not the timer under the bottom quick control pane. Why hasn't Apple changed that?

Nightfuse wrote:
I find myself using alarm clock all the time and not the timer under the bottom quick control pane. Why hasn't Apple changed that?
Submit your feedback directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback
I'm wih Allan on this. And I've got one-button access to the Alarm. I use Siri.

Faster than 2000Hz / TCP takes too long

1. How can we get faster than 500µs (2000Hz) on an PXI RT-8145 System? 502µs,501µs works fine, but 500 or lower the System doesnt respond. We loose connection to the RT System, also the RT-System Manager doesn´t respond. It doesn´t make any difference which VI we use. With 501µs we have an CPU usage about 91%.
2. If our program start´s, it takes always 1.24min to connect over TCP/IP. We tried all timing an loop-rates, but it´s always the same time.Message Edited by prol on 04-11-2005 07:58 AM

Could you describe in a bit more detail your application, including the code running in your host aplication and the code running in LV RT on the 8145 controller.
What type of I/O operations are your performing?
I assume you want to communicate between the host and LV RT application at 2000 Hz or faster? Why do you need these fast loop rates in your communication? What is the overall purpose of the application? In general TCP/IP is not well suited for fast loop rates, i.e. sending small packets back and forth at high rates. it is more designed for streaming data, sedning larger packets at high data rates in one direction. It sounds like you may be trying to setup a closed loop controller across Ethernet which will have a maximum looop rate around the rates you are describing.
On your second question, please describe what you mean by 'program starts'. What is the sequence of operation on the host and RT system? Do you reboot or start either of these two systems at this time? How is you Ethernet configured? Specifically how are IP addresses assigned to the two systems? Do you have a DHCP server on the network or are the IP addresses statically assigned? If neither is true, Windows will take about a minute to a minute and half to assign its own IP addresses.
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

If i try to update i get all the time this device isn't eligible for the requested build..., if i try to update i get all the time this device isn't eligible for the requested build...

resieving all the time this text ... with ipad iphone ???
have newes software 10.7.2 and news itunes 10.5
this device isn't eligible for the requested build
what can i do ????

Can you get a Wi-Fi connection on your iPhone?
I got an Internet connection on my phone, went to SETTINGS --> GENERAL --> SOFTWARE UPDATE and updated my Software wirelessly (no iTunes involved).
When I connected my phone to my Computer again and iTunes popped up, it showed that my iPhone software was up to date. Then I could restore to an old back-up.

Photoshop cc crashes all the time. I can use it for 1 min at the time.

I cant use my photoshop because it is chrashing all the time. I tryed to reinstalled the product but with no luck. It behaves the same. After open PSD it works fine in maximum 1 min. Then it crashes.
Please help =)

Please read these and proceed accordingly (maybe start with restoring Preferences):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

FCPX crashes all the time using the Intensity Pro Card for monitor preview wassup?

I have been using FCPX for a few months and I like it somewhat and could really love it for it not crashing on all my projects. If I scrub the timeline or apply a filter it crashes. I'm using the Blackmagic Intensity Pro card for monitor output and the latest drivers that they put out and can't really get through a project because it crashes all the time.I thought that if i get a different display card it would possible help I have the GForce 120 card which only has 256MB ram.Can anybody put some light on the issue?

FCP X currently does not support Intensity Pro cards.
Andy

"tp import all" runs 24 times faster than "tp import TR " for long queue?

Similar Messages

Maybe you are looking for