Tp import eroor: Systems name (DB0) is different from name in TADIR (PA0)

Experts,
I am receiving the error:
ERROR: SAP System not installed properly. Systems name (DB0) is different from name in TADIR (PA0)
when trying to execute the command:
tp import DB0K900022 DB0 client=300 u1268 pf=/usr/sap/trans/bin/TP_DOMAIN_PA0.PFL
I am peforming this from solution manager unix command line. I have a single transport domain where all systems and landscapes(ie. ECC, SRM, BW etc) are included.
I am trying to perform this without having to log on to each system to execute the command and import.
Any advice is appreciated. Thanks.
David Carr
Basis Administrator

Hello David Carr
Why don't you logon to your domain controller and process the transport request through STMS, if setup correctly you don't have to logon to each seperate SAP system either, you can access each import queue from there.
Kind regards
Tom

Similar Messages

My pal made spelling mistake when registering her Ipad with ITunes,how can this be rectified.Her name is spelled different from whats on her Credit card.thanks

Hi Apple Pals,
My friend got a present of Ipad 2 and tried to set it up.She made mistakes in spelling her name when registering.Her name is now different from name on her Credit card.It is possible to remove this and re-register again with ITunes etcera.
Thank s
Julie

Hello, Julie.
Thank you for the question. As the device is registered to the Apple ID, you would simply need to make sure the name is correct on https://appleid.apple.com/. If the name of the device itself is incorrect and you wish to change it, see the article below.
iTunes and iOS: Change the name of your iPhone, iPad, or iPod
http://support.apple.com/kb/ht3965
Cheers,
Jason H.

How can I change my iTunes Account Name to something different from my Billing Information Name?

I have an iTunes account using a relative's credit card. As a result, my iTunes Account Name is changed to her Name in the Billing Information.
Can I change my iTunes Account name to something different from the Billing Information Name?

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Same email address, different 'from' name

Hi - I would like to be able to send an email from ios to a 3rd party and choose who the recipient sees that it comes from, but use the one email address. So 1 'name' is my personal name, 1 is my business name.
I host a domain and I have sent up 2 email accounts in ios with different usernames let's say [email protected] and [email protected] [email protected] is set to divert to [email protected] on a server level, so ALL emails sent to either x or y, go to x. So I have both set up on my Mac, y doesn't get email, so I don't get double ups - when I want to send from a different user name, I just send from the other account.
Now ios has the same ability in theory and when I set it up the same way, it all works BUT the recipient receives the email from my personal name, despite me sending it from my business name???
Anyone have a fix or answer??!!
TIA!!

bbrundell wrote:
Hi there
I'm staying at a Novotel in Edinburgh. Their wireless shows up as "Orange France". The BT FON map shows it as a "single hotspot operated by a roaming partner".
While I can select "FON" from the list of providers for login, when I use my @btinternet email address as the login I am denied access.
Should I have a FON account name different from my btinternet email address. Is my FON password the same as my email password?
Thanks
Ben
Hi Ben. Welcome to the forums.
The BTFon access is via the primary email address and associated password.
Does the list of providers actually say BTFon or BTOpenzone ?
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Two alias in Mail: how to show different "from" names?

I've been reading various threads about aliases in mail, but none have exactly described my situation. What I want to be able to do is set up aliases in my one account and have the mail shown as "from" a different name depending on which alias I've used.
Here's my current set-up:
Account Type: POP
Description: POP account
Email address: [email protected], [email protected]
Full Name: myname & mywifesname
Incoming mail server: pop.domain.com
username: xxxxx
password: xxxxx
outgoing mail server: smtp.domain.com
So, we can each send email "from" our own email address, but they're all marked as from "myname & mywifes name". How do I change it so if I select "[email protected]" the mail is shown as simply from "myname" and vice versa.
I understand from reading other threads that the one thing I can't do is set up a separate account for each, as they will both have the same incoming server and username. (Which was exactly what I could do back in the dark ages of Outlook Express.)

Unless you really just absolutely want to have your sent emails say they're from "Trevor C" or from "Trevor C's Spouse", you could just delete the full name entry from that account in Mail's Preferences (i.e., set full name field to null), and then any sent messages' "from" address will simply appear as being from [email protected] or from [email protected], depending on which "account" (alias) you selected in the "Account" pull-down menu. This would be, I think, the easiest patch for you to implement.
People who get email from me get mail from "[email protected]" and not from "J.V." Personally, I hate the full name crap and wish there were a way to display the "from" field in my inbound message viewer pane in email address format, rather than full name format. But that's just me.
(if you find that this solves your problem, or is actually helpful towards arriving at a solution to your problem, please consider clicking on either the "helpful" or "solved" buttons in the header of my post)

Different "From" names in Mail

All my mail is forwarded and funneled thruogh gmail, and then to my Mac Mail client. I have configured all my email addresses in the account tab by separating them with a comma. Great. Now I can send mail from all my email addresses... except, they will all show that they are from me, listing my personal name.
I want some of the addresses to be associated with my company name, however, and not my personal name.
How do I go about this?

Unless you really just absolutely want to have your sent emails say they're from "Trevor C" or from "Trevor C's Spouse", you could just delete the full name entry from that account in Mail's Preferences (i.e., set full name field to null), and then any sent messages' "from" address will simply appear as being from [email protected] or from [email protected], depending on which "account" (alias) you selected in the "Account" pull-down menu. This would be, I think, the easiest patch for you to implement.
People who get email from me get mail from "[email protected]" and not from "J.V." Personally, I hate the full name crap and wish there were a way to display the "from" field in my inbound message viewer pane in email address format, rather than full name format. But that's just me.
(if you find that this solves your problem, or is actually helpful towards arriving at a solution to your problem, please consider clicking on either the "helpful" or "solved" buttons in the header of my post)

SSO through the BOE repository manager for different user names.

Hi all.
I have a task to provide a SSO access from Portal to the Crystal reports, stored in the BO folder.
I've configured everything following the configuration guides, including:
1. SSO by SAP Logon Ticket with the back-end system.
2. System in portal SLD. Connection tests passed successfully.
2. BusinessObjects Enterprise repository manager (BOErm) in KM.
I've created in the Portal a test user with the same name as in the back-end system. Everything works fine.
But I SSO doesn't work if users are different.
The problem is that production users have different names in the Portal and in the back-end system.
I cannot find how can I configure user mapping for access reports through the BOErm.
I changed the Logon Method in the portal system from SAPLOGONTICKET to the UIDPW but it didn't help.
Seems like BOErm doesn't use the portal system at all and always connects to the back-end by SAPLOGONTICKET method.
Can anybody help me to solve my problem?
How can portal users access folders in the back-end system where they have different users names?
Thank you in advance.
Mikhail.

Hi,
just to clarify it a bit more.
You have a SAP EP woth SSO to BO. Whats the Datasource ? R/3, BW, CRM ?
Usually the names of the users are identical on the SAP EP and the Backend like BW.
You just have to confiure SSO (like you did), import the roles from BW to BO, grant permissions on EP (that the users/roles can see the iView), grant permissions on BO (that the users/roles have access to the report) and you should be fine.
Where is the mismatch of the Usernames ? Between SAP EP and Backend like BW ?
SAPLOGONTICKET is the only authentication method you can use between SAP EP and BO
Regards
-Seb.

PDF files keep coming with old file name not as current file name

Hi,
I have a problem when exporting InDesign docs to PDF with some documnets. If I change the name in the export dialog box, then every time I export this doc to PDF in the future this name keep coming, even when I change the name of the document or save it in a new name. This causes confusion, since sometimes the name is completely different from the InDesign file name. What can be done to tell InDesign to save the exported PDF file according to the current file name and don’t remember the old PDF file name?
I was thinking of a script, is there a ready one to use?
Thanks

Thanks for the tips, very useful indeed.
Though it is bit hard to have everyone in the studio follow them as a routine. I way I used to do this is to go to Save as command, with right mouse I choose copy the highlighted document name, then I choose cancel, then when I choose to export I'll paste the the name which is the current file name, this is good for me, but I wouldn't dream of having this as a routine for everyone in the studio.
I was thinking it would be easy if I can find a script, since I don't know scripting, to do just that, i.e. have Indesign to copy the current filename of the document (whether by doing the same trick as I am doing or if there is a direct command to do that in the script), then the script will go to the export dialog box, paste that name, then I will go on with the normal export dialog box options.
This script will be easier to have everybody in the studio to follow.
Appreciate your help.
Thanks

Internal Customer Name vs. External Customer Name

Is there somewhere in Customer Master information where I can store an internally used customer name vs the actual shipping name/invoicing name?
We have customers that do not want their official name on shipping labels because the boxes will get stolen based on the name of thier company. So we want to have the official name in our system to search on and work with, but ship with some abbreviation or alias.
Example:
Internal Name: Jim Smith's Fine Jewelery Shop (the real name)
External/Shipping Name: JSFJS Inc (alias to hide the shipped contents)

Hi Brian,
I do not know if somebody already helped you on your question or you did, but here is a possible solution.
You can solve this problem by comple the NAME 1 field when you create your customer with the "real name" of the customer, and in NAME 2 with the "alias" name.
Then when you define your shipping and invoice documents, you must take the name of your customer from NAME 2 in the form.
Hope this may helps.
kindly regards!
Bea.

Importing In different DBProvider name : Urgent

Hi,
I am trying to export a DataBase Provider from one Portal to another Portal environment. The case is that I want to import the exported DBprovider with a different name into the destination Portal environment..
Is this Possible to be done ...
Thanks in Advance

Bob,
It appears that you can import duplicate named files by unchecking the "ignore Duplicates' box--the first time you import files (or a file) from a folder. But, if you go back to that folder to use 'import' to update, then the import takes place immediately bypassing the screen with the "ignore Dulicates' box on it--I presume it assumes that you would not want to change any of the original settings for an import from a given folder.
The point is you had better leave it unchecked always if you want duplicates ingested intially or later on reimport.

Import table with a different table name!

Dear All,
I have backup all users in my database using exp command.
Now i want to import 2 tables from this backup, as tables already exists i want to import table with different table name.
Is it possible with exp command? If not what else is the solution.
Thanks, Imran

Hi..
Now i want to import 2 tables from this backup, as tables already exists i want to import table with different table name.Is it possible with exp command? If not what else is the solution.
>
Well, its not possible.You can import those two tables in some test database, rename them and then take the export and import in the database you want.
Or,
You can import those 2 tables in some other schema in your database, rename them again take the export and them import it.
Anand

Same source file name with a different extension

Hi All,
I have a source file which is dynamic all the time. Can I create a target file which has the same name as the source file but with a different extension.
Scenaio is file to file.
test. xml is the source file name and the target file name should be as test.csv
Regards,
Amar

Hi Amareshwar,
you can write a java code (either in UDF or import in imported archive and use in imterface mapping).
The piece of code is..
DynamicConfiguration conf = (DynamicConfiguration) myParam.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey Filekey = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String OriginalFileName = conf.get(Filekey);
if (OriginalFileName != null)
NewFileName=OriginalFileName.replaceAll(".csv",".txt");
conf.put(Filekey,NewFileName);
And in Integration Directory>Configuration Scenario>your communication channels (both sender and receiver) just select
Adapter specific message attributes- File name
This would solve your problem.....
Regards,
Vishal Gupta
Plz reward points if you are satisfied with the solution.

System copy with Export/Import Distribyted system UNIX database, Windows CI

HI
we have a distributed system witch I want to make a copy of
Oracle Database on HP-UX
CI + SCS on Windows
Dual stack system ABAP/Java
1) I have made an system copy with data base copy tools, and that works fine.
2) I have made a system copy export/import of a "central system"
If I try to make an export/import system copy on a distributed system it wont work.
( this work fine in a central system) I dont get anny error messages all gren checks marks !
It seems like the problem are in not finding the profiles from CI ?
It find the profiles for the sapgateway.
I someone are more interested I have more documentation with screen shots in a word document.
I Have used Installation Master SR3 and tryed with some older versions as well.
I have read SAP Note 970518 - Hom./Het.System Copy SAP NetWeaver 7.0 (2004s) SR2
SAPINST
Using virtual hosts for central and/or DB instances
SYMPTOM:
You are using virtual host names for your central instance and/or the database instance (e.g. in a HA environment). Although SAPinst finishes successfully, some export steps are not being performed.
SOLUTION:
Start the export with the property SAPINST_USE_HOSTNAME=<virtual host>.
If the central instance and the database instance run on different hosts, run the database export with SAPINST_USE_HOSTNAME=<virtual host name of the DB server> and - if you run a Java or ABAP+Java system - run the central instance export with SAPINST_USE_HOSTNAME=<virtual host nameof the central instance host>.
If you run a central system with different host names in the profiles, handle the export as a distributed export, calling SAPinst with parameter SAPINST_USE_HOSTNAME. Perform the export of the database instance on the DB server, calling SAPinst with SAPINST_USE_HOSTNAME=<virtual host of the DB server>.

Hi I have received folloving answer from SAP:
You're doing everything correct - besides one thing.
When you specify the profiles during the database export it cannot be
correct to specify the profiles of the gateway instance located on
the same host.
As a consequence - it picks up the wrong instance G01 and sets the
property 'hasABAP' and 'hasJava' to 'false'... - thus the export
is empty. You can see this within the corresponding 'sapinst.log' file.
The correct procedure would be to specify the profiles of the central
instance on the Windows Machine. If you cannot access them, you should
make them available by Samba or by any type of software which makes
it's possible to export filesystems or directories from windows to
unix.
Best regards
Bent

ORA-23327: imported deferred rpc data does not match GLOBAL NAME of ..

Hi,
We took an export of a production database in Oracle 9i (9.2.0.7) and created a new database on a test server with Oracle 10g (10.1.0.5)
The original production database was called DC20 and our new test database is called SD20.
Looking at the logs after the import we're seeing this error:
"ORA-23327: imported deferred rpc data does not match GLOBAL NAME of importing db"
We've looked into it a little and it seems to make sense because the names of the databases are different, and from what we've read, we really didn't need to do a full import including SYSTEM anyway. We also came across a solution telling us:
"If you are not using Replication on the target database, these errors can be ignored. However, you should subsequently remove all the replication objects by running:
$ORACLE_HOME/rdbms/admin/catrepr.sql, then catproc.sql"
What I was wondering was if someone could validate that running these scripts and ignoring the errors will be ok, or if they'll cause us issues further down the line.
In case its needed, heres my Export parameter file
"FULL=Y
DIRECT=Y
LOG=E:\Exports\DC20\Log\expDC20.LOG
FILE=E:\Exports\DC20\Data\DC20.DMP"
and heres my Import parameter file
"FULL=Y
COMMIT=Y
GRANTS=N
IGNORE=Y
BUFFER=500000
FILE=E:\Imports\SD20\data\SD20.dmp
LOG=E:\imports\SD20\log\impSD20.LOG"
Thanks for your help!

Thanks Neil, we did already see this note and added it to our list of possible solutions. After we found this one, we also found the one I quoted, which would seem to be the path of least resistance (it would save a good 10 hours in import time if nothing else).
However, if we can't do what I'm asking about in my original post however, the note you mentioned will be our next route..

What is SAP name space for different objects.

Hi Guys,
Kindly let me know the SAP name spaces for different objects.
Thanks

hi,
Naming Conventions in ABAP Objects
Global classes and interfaces that you create in the Class Builder are stored in the class library and administered by the R/3 Repository: they therefore have the same namespace as all other Repository objects (database tables, structures, data elements, and so on).
It is therefore necessary to have naming conventions for object types and their components and to use them uniformly within program development.
The following naming convention has been conceived for use within the SAP namespace:
If you do not observe the naming conventions for object types (classes and interfaces), conflicts will occur when the system creates persistent classes, since it will be unable to generate the necessary co-classes.
Namespace for Components
A single namespace within a class is shared by:
All components of the class itself (attributes, methods, events, constructors, interfaces, internal data types in the class, and aliases)
All public and protected components of the superclasses of the class.
Method implementation has a local namespace. The names of the local variables can obscure those of class components.
Naming Convention
The naming convention has been kept as general as possible to avoid adversely influencing the naming of objects.
General Remarks
When you choose names for development objects, you should:
Use English names
Use glossary terms when possible
For example, CL_COMPANY_CODE instead of BUKRS
In compound names, use the underscore character (_) as a separator. Since names are not case-sensitive, this is the only character that you can use to separate names.
Example: CL_COMPANY_CODE, CL_GENERAL_LEDGER_ACCOUNT
Names should describe the action, not the implementation of the action.
Example: PRINT_RECTANGLE, not RECTANGLE_TO_SPOOL
Conventions for Object Types
Class and interface names in the class library belong to the same namespace as data elements, tables, structures, and types. They are maintained centrally in table TADIR.
Class in the class library
CL_<class name>
The class name should be made up of singular nouns.
CL_COMPANY_CODE, CL_GENERAL_LEDGER_ACCOUNT
Interfaces in the class library
IF_<interface name>
The same naming convention applies to interfaces as to classes.
IF_STATUS_MANAGEMANT, IF_CHECKER
Local classes in programs
(recommendation)
LCL_<class name>
The class name should be made up of singular nouns.
LCL_TREE_MANAGEMENT
Local interfaces in programs
(recommendation)
LIF_<interface name>
The sane naming convention applies to interfaces as to classes.
LIF_PRINTER
Recommended naming conventions are not compulsory. However, if you use prefixes for these class and interface names, you should use those listed above.
Conventions for Components
Method name
<method name>
Method names should begin with a verb:
GET_STATUS, CREATE_ORDER, DETERMINE_PRICE
Events
<event name>
Event names should have the form
<noun>_<participle>:
BUTTON_PUSHED, COMPANY_CODE_CHANGED, BUSINESS_PARTNER_PRINTED
Local type definitions within a class
(recommendation)
TY_<type name>
TY_INTERNAL_TYPE, TY_TREE_LIST
Data definitions (variables)
<variable name>
When you name variables within a class (CLASS-DATA or DATA), avoid using verbs at the beginning of the name (to avoid conflicts with method names).
LINE_COUNT, MARK_PRINTED, MARK_CHANGED, STATUS
Data definitions (constants)
(recommendation)
CO_<constant name>
CO_MAX_LINE, CO_DEFAULT_STATUS, CO_DEFAULT_WIDTH, CO_MAX_ROWS
Recommended naming conventions are not compulsory. However, if you use prefixes for these class and interface names, you should use those listed above..
Concrete Method Descriptions
Attribute access
SET_<attribute name>, GET_<attribute name>
Methods that access attributes of any kind should be prefaced with GET_ or SET_.
GET_STATUS, SET_USE_COUNT
Event handler methods
ON_<event name>
Methods that handle events should begin with ON, followed by the name of the event that they handle.
ON_BUTTON_PUSHED, ON_BUSINESS_PARTNER_PRINTED
Methods that perform type conversions
AS_<new type>
AS_STRING, AS_ISOCODE
Methods that return a Boolean value
These methods may not return any exceptions.
Recommendation: Use SPACE and 'X' to represent false and true respectively.
IS_<adjective>
IS_OPEN, IS_EMPTY, IS_ACTIVE
Check methods
CHECK_<objective>
CHECK_AUTHORIZATION, CHECK_PROCESS_DATE
Local Conventions Within Methods
For parameters
The parameters are regarded from the point of view of the method that implements them:
IMPORTING parameters
IM_<parameter name>
EXPORTING parameters
EX_<parameter name>
CHANGING parameters
CH_<parameter name>
RESULT
RE_<result>
Using prefixes is NOT compulsory. However, if you do use them, use those listed above.
For exceptions
The following table contains a series of possible exception names, that can also be used generically (for example, NOT_FOUND could also be used as DATE_NOT_FOUND)
EXCEPTION
Meaning
ACTION_NOT_SUPPORTED
The requested action or function code is not supported.
CANCELLED
If a method uses a dialog to find out what has to be dome (for example, a list of choices), and the user chooses "Cancel", you can set this exception.
EXISTING
A new object that you want to create already exists in the database.
FAILED
The method could not be executed because of the current environment. This exception is intended for cases where the method cannot be executed because of variable system circumstances.
..._FAILED
Part of the method could not be completed because of the current environment. (OPEN_FAILED, CLOSE_FAILED, SELECTION_FAILED, AUTHORIZATION_FAILED)
FOREIGN_LOCK
Data is locked by another user.
INCONSISTENT
Object data in the database is inconsistent.
..._INCONSISTENT
The component data for of an object in the database is inconsistent.
INVALID
The object data entered is incorrect (for example, company code does not exist). Compare NOT_QUALIFIED.
..._INVALID
The component data entered for an object is incorrect. Compare NOT_QUALIFIED.
INTERNAL_ERROR
Last resort. Only use this exception if you cannot be more precise about the nature of the error.
NOT_AUTHORIZED
The user does not have the required authorization.
NOT_CUSTOMIZED
The object requested is not correctly customized.
..._NOT_CUSTOMIZED
The component of the requested object is not correctly customized.
NOT_FOUND
Unable to find the requested object.
..._NOT_FOUND
Unable to find component of the requested object.
NOT_QUALIFIED
The combination of input parameters is insufficient to run the method. Compare INVALID.
..._NOT_QUALIFIED
One parameter of the method is not qualified.
NUMBER_ERROR
Error assigning a number.
SYSTEM_ERROR
This exception is set if the Basis system returns an unexpected error message.
regards,
sudheer.

Tp import eroor: Systems name (DB0) is different from name in TADIR (PA0)

Similar Messages

Maybe you are looking for