Tp import flag not properly set in "STMS", tp-processe not ended

since last Stopping of our Q-System the display in of the import queue doesnt work fine. when we transport requests from the development-system to the q-system the truck-icon doesn't disappear. the processes in AIX are not finished, after time the "overview of the transport logs" shows that the import is done, but the truck doesn't disaappear
we tested the transport tool (RSTPTEST): o.k., in the TMS configuration we made the communication test: o.k.
sometime we can make the truck disappear, when we delete the .LOB in /usr/sap/trans/tmp but this doesn't work with all requests

Check the Import monitor and the tp system log. If the truck icon still shows is most likely because the Import is not fully finished, As I said check the import monitor and let us know what it says.
Regards
Juan

Similar Messages

TS1496 This is a new computer. I set up a new account. I want to start importing my CD's to my account, but when I click on Music the Import does not appear.

This is a new computer. I set up a new account. When I click on Music, Import does not appear to allow me to add my CD's

Hi,
See if these Links for Home Sharing add any light to the problem
Understanding
http://support.apple.com/kb/HT3819
Troubleshooting
http://support.apple.com/kb/TS2972
How to
http://support.apple.com/kb/HT2688

My visual voice mail does not work,but I have properly set it up, how do I fix this?

My visual voice mail does not work,but I have properly set it up, how do I fix this?

Visual Voicemail is all carrier side, funny enough. Apple can't really do anything to troubleshoot it because it's outside of their realm. Be sure to contact your cellular carrier for further assistance

SVM state database replica Master flag not set for any replica

Hi guys,
Recently i have done root mirroring. After creating svm volumes, i ran the metadb command to create state database replicas on the replaced disk. I created only one replica that time. I tried creating additional replicas but it said like replica already exist on the slice. So i deleted the replica on the slice. Thn i created 3 replicas again & ran metadb. Output of metadb command is below. I found there is not master flag not set for any replica. I like to know whether it would create any issue or it is fine.
flags first blk block count
a u 16 8192 /dev/dsk/c1t0d0s7
a u 8208 8192 /dev/dsk/c1t0d0s7
a u 16400 8192 /dev/dsk/c1t0d0s7
a p luo 16 8192 /dev/dsk/c1t1d0s7
a p luo 8208 8192 /dev/dsk/c1t1d0s7
a p luo 16400 8192 /dev/dsk/c1t1d0s7

That shouldn't be any problem, i think the metadb's are just read at boot, and at boot one of the replicas will be choosen as the master, and will then get the m-flag.
I suspect that you deleted the replica which was used as the master during the last boot, which is why none of your replicas have the m-flag at the moment, which is not a problem as it will be choosing a new replica during the next boot.
.7/M.

IPhoto deleting images in iPhone but failing to import as not enough space

I've lost the images and films on my iPhone as unfortunately I have the import set up to auto-delete (aargh!). Not enough disk space in iPhoto but it still deleted everything on my iPhone.
Any idea if I can recover the lost images from my iPhone?
Thanks, Stephen

first you must have a minimum of 10GB of free disk for the Mac to operate correctly plus any extra space for special programs - do not continue operating until you have adequate space - many bad things can happen if you do not have adequate free disk
as to these photos you may be able to recover them using a program like media recover - http://download.cnet.com/MediaRECOVER/3000-2242_4-42741.html
in the future never allow any computer to automatically delete photos from your camera - import them and properly disconnect your camera and be sure everything is good (I wait for at least one backup cycle) and then use the camera reformat command to erase the media card and renew its format
LN

Imported .avi not rendering

I just opened a new project and sequence, dragged in an .avi file, and then dropped it into the timeline. Since it's the only file, I'm not sure why it's showing up as unrendered (red), but when I select it and choose Render All, It renders for less than a sec. and then stops, leaving the whole thing still unrendered.
This is FCP 5.x
What's going on?
Message was edited by: Jeffrey Ellis

#1 - FCP does not work with AVIs well, if at all. Preferred options are to capture with FCP, or convert the AVI to a MOV, either with QT PRo or Compressor.
#2 - FCP 5 does not automatically make the sequence settings match the clips settings.
Shane's Stock Answer #28: When I put a clip in the timline, I have to render it before it will play. Why?
Your clip settings MUST match your timeline settings. If you have DV/NTSC material, you need a DV/NTSC timeline. The frame rate, audio rate and dimensions (4:3, 16:9) all need to match exactly. In Final Cut Pro 6, this is easy, because when you drop a clip into the timeline, it asks if you want to set up the timeline to match the settings of the first clip you drag into it. Click YES and you are ready to go.
However, in FCP 5.1 and earlier, it is a bit trickier.
The most important thing you need to do is properly set up your project from the start, and the best way to do this is to choose a setting from the Easy Setups, located under the Final Cut Pro menu.
Once you do this, you’ll need to create a new sequence. This is because the sequence that is already in your new project is setup for the typical default setting of DV/NTSC, or for the settings of your last project, which might not match what you are currently working with. So delete SEQUENCE 1 and create a new sequence:
This new sequence will contain the settings you chose in the Easy Setup menu, and should match the format you captured.
Shane

Import is not available all other actions are active but not import help?

Import is not available all other actions are active but not import help? I wish to import bookmarks from internet explorer, I am using windows 7

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode"

Short Slo Mo video imported to Aperture or iPhoto via cable (Air Drop not supported on my iMac): only the SloMo section imports. Not the rest. Any fixes?

Short Slo Mo video imported to Aperture or iPhoto via cable (Air Drop not supported on my iMac): only the SloMo section imports. Not the rest. Any fixes?

Okay, as I'm working through this I see that I have to add the "Admin" account to each file with "read only" permission. Simply changing the "everyone" account access does nothing.
So how do I change the permissions settings in iPhoto or Aperture to give each exported file the desired permissions? I cannot locate a setting in the iPhoto or Aperture applications.
Also, I added a password to the user account. It did not change how files are output.

Import stops with 'Transport set created, exported, and submitted...'

Hi,
I'm using Oracle Portal 10.1.4, and I've successfully imported page groups into this portal before, but now when I try to do an import, I only see the following message in the 'Browse Transport Sets' page:
Import: Transport set created, exported, and submitted to background process for import.
This is true for new page groups and for page groups that should be replaced. Any ideas?
What is the background process? How do I get it started, if it has failed? How can I remove the transport set that is in this 'Import' status. Any help appreciated.
Thanks,
J.

Hi J,
For me if this is happening is cause problably something hang on your side while doing the Portal Export / Import. Not sure how it happened but I've seen this happening for other persons. The easiest way is to clean up the Portal Transport Set tables. Upload the DMP to the Portal again and attempt to merge it again.
There is an out dated Note in the Metalink for this, but I'd basically submit a Service Request as Oracle Support may better help you on this matter and eventually update the old Note -- Note:177597.1 - How to clean up the Oracle Portal Transport Tables.
I hope it helps...
Cheers,
Pedro.

IMPORTING: How do I set IP 09 to Copy image files into iPhoto09 on import?

I have a number of image files stored in folders on my desktop.
How do I set iPhoto 09 to copy the files from these folders on import and not just reference the image files in the spot they currently reside? After importing these files I would like to trash the folders on my desktop....

iPhoto Menu -> Preferences -> Advanced tab
Make sure the box at 'Copy Items to the iPhoto Library' is checked.
Regards
TD

Import Dialog not opening when Camera Card inserted

Have set this option in LR2 preferences. However as I also have PS Elements 6 this loader opens instead. Have set auto play for the card reader to open LR to no avail. Have tried re-installing LR no change. Using Windows XP.
Alan

Lee, I to have just discovered that the import dialog does not pop up. The help says it is supposed to work that way so I thought I had some kind of problem. Are you saying the help is wrong and it has been changed. Not documented?
I am also on Windows XP, SP2 and I cannot figure out how to make auto import work. Is there some set up that may not be documented on how to do this?
I mean I can always go file>import from disk or file>import from device but I was surprised to find the import dialog not pop up when a card is inserted. The check box is there in preferences>import to suggest along with help menu, that it should work.
Appreciate any feedback.

OdiStartScen threw "The scenario did not end properly" Exception

Hello,
I tried to use ODI to do the "CDC", but OdiStartScen, which i used to start the scenario continually, threw "The scenario did not end properly" Exception at the end of process of my package. The process is "OidWaitForLogData --> extend window --> interface --> purge window --> OdiStartScen";
java.lang.Exception: The scenario did not end properly.
     at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
     at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(SnpScen.java)
     at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java)
     at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:595)
OdiStartScen "-SCEN_NAME=JOURNALIZEPACKAGEDEMOSCEN" "-SCEN_VERSION=002" "-CONTEXT=GLOBAL" "-LOG_LEVEL=5" "-SYNC_MODE=1" "-ODI_USER=SUPERVISOR" "-ODI_PASS=d,yXgLJMwXJsIhe0qMX.X9PPn"
Does anyone have an idea of what is the problem ?
regards

(From ODI user's guide/MODEL/ Change Data Capture)
Using Changed data in Consistent journalizing is similar to simple journalizing regarding interface design. It requires extra steps before and after processing the changed data in the interfaces, in order to enforce changes consistently within the set.
Operations Before Using the Changed Data
The following operations should be undertaken before using the changed data when using consistent set journalizing:
Extend Window: The Consistency Window is a range of available changes in all the tables of the consistency set for which the insert/update/delete are possible without violating referential integrity. The extend window operation (re)computes this window to take into account new changes captured since the latest Extend Window operation. This operation is implemented using a package step with the Journalizing Model Type. This operation can be scheduled separately from other journalizing operations.
Lock Subscribers: Although the extend window is applied to the entire consistency set, subscribers consume the changes separately. This operation performs a subscriber(s) specific "snapshot" of the changes in the consistency window. This snapshot includes all the changes within the consistency window that have not been consumed yet by the subscriber(s). This operation is implemented using a package step with the Journalizing Model Type. It should be always performed before the first interface using changes captured for the subscriber(s).
Designing Interfaces
The changed data in consistent set journalizing are also processed using interfaces sequenced into packages.
Designing interfaces when using consistent set journalizing is similar to simple journalizing, except for the following differences:
The changes taken into account by the interface (that is filtered with JRN_FLAG, JRN_DATE and JRN_SUBSCRIBER) are not automatically purged at the end of the interface. They can be reused by subsequent interfaces. The unlock subscriber and purge journal operations (see below) are required to commit consumption of these changes, and remove useless entries from the journal respectively.
In consistent mode, the JRN_DATE column should not be used in the journalizing filter. Using this timestamp to filter the changes consumed does not entirely ensure consistency in these changes.
Operations after Using the Changed Data
After using the changed data, the following operations should be performed:
Unlock Subscribers: This operation commits the use of the changes that where locked during the Lock Subscribers operations for the subscribers. It should be processed only after all the changes for the subscribers have been processed. This operation is implemented using a package step with the Journalizing Model Type. It should be always performed after the last interface using changes captured for the subscribers. If the changes need to be processed again (for example, in case of an error), this operation should not be performed.
Purge Journal: After all subscribers have consumed the changes they have subscribed to, entries still remain in the journalizing tables and should be deleted. This is performed by the Purge Journal operation. This operation is implemented using a package step with the Journalizing Model Type. This operation can be scheduled separately from the other journalizing operations.
To create an Extend Window, Lock/Unlock Subscriber or Purge Journal step in a package:
Open the package where the operations will be performed.
Drag and drop the model for which you want to perform the operation.
In the Type list, select Journalizing Model.
Check the option boxes corresponding to the operations you want to perform.
Enter the list of subscribers into the Subscribers group if performing lock/unlock subscribers operations.
Click OK.

The Expanded package flag must be set if ShareName is specified

Hi.
I am trying to migrate packages from SCCM 2007 R2 to 2012 R2, but almost all packages fail with "The Expanded package flag must be set if ShareName is specified".
I don't see any difference between the few packages that migrate successfully and the ones that fail.
What am I missing?
Thanks in advance.
/Michael

Actually, I see that all the packages, that report the error have a greyed out folder name. The ones, that work, do not.
If I click 'Share the distribution folder' -> Apply and then delete the folder name, click 'Access the distri...' -> Apply, I am able to migrate the package.
I don't want to do that for 100+ packages - is there an easier way?
Thanks in advance.

Imported files not found

Hello,
I am trying to set up Audtion for my students to practice on. I have loaded the "Sky Cell Tel" files from the Audition "Classroom in a Book." This is what I have done:
1. I copied the files from the CD to a folder created specifically for the class using copy/paste in My Computer. I do this so we aren't working with files off the CD, but rather permanently on the harddrive. The files copy over and are present. A check of the properties show the full file content is present. They also play back in Windows Media Player.
2. I launch Audition. I click on File, Import and direct the import to the Sky Cell Tel files in the the folder I put them in. The files load into the "Files" tab. I test the files and they all play in Audition using the play button in the files tab. To give my students a "start from scratch" approach I do not load any files into the timeline. I save the Session As ... and close Audition.
3. I then re-open Audition and then open the previously saved Session. When I do the files that I had previously imported are not present in the Files tab. Where are they??? I am expecting the saved Session to show the imported files as any other editing program I have used. Note, if I use a file in the timeline..., THEN it shows in the File tab upon reopening the saved Session. But files not used in the timeline do not show in the Files tab.
I think my frustration in obvious. I insure the files are permanently on the harddrive. I Import the files. I save the Session. Latter, upon having a student re-open the Session the imported files are not found. Embarrassing and frustrating.
Any help would be appreciated.
Thanks, Tom

I presume we're talking about AA3 here. Yes, a file doesn't get associated with a session until it has actually been used in it - it's always been like that. Normally this isn't an issue (or if it is, nobody's ever mentioned it here before), but I can sort-of understand your frustration. My take on giving students a real-life experience in this situation might perhaps involve a little chat with your network manager, depending upon how you've got your network organised. Give each student their own file storage area that they have to log into, and put copies of the files in each of them, and get them to have the complete experience by loading the files themselves. They'll soon find out what happens to files they don't use...
I think that the issue with saving sessions having unused files in the file window is that the way the .xml is structured, you only get entries which have time stamps on them. If a file isn't used, then it's not associated with any time stamps and is regarded as not part of the session at save time. It's completely logical, I'm afraid - although frustrating for you!

Using program RSTXSCRP to import FORM not successful

hi experts:
I have problems when import FORM using program RSTXSCRP.
message is below:
Transport object FORM YCN_TEST is being processed
Language vector used: DEFISNL
Original language was set to E
Definition E imported
Original language E imported
WARNING: The following error occurred when object was activated:
Form YCN_TEST does not exist
Object imported but not activated
001 warning message(s) appeared during import

Hi
It seems your form YCN_TEST is not active .check it
and see that correct parametrs are to be passed to the selection screen of the program RSTXSCRP. it will import correctly. first impor the same to desktop.
and then run the same program in other client and EXPORT the same
it will work.
Reward points for useful Answers
Regards
Anji

Tp import flag not properly set in "STMS", tp-processe not ended

Similar Messages

Maybe you are looking for