The connection speed is missing from those hub3 figures.
G992.1 is ADSL max, up to 8Mb, which is compatible with all routers. Perhaps you have the settings wrong on the TP link one.
There is some information on this page, which should also apply to the 8961ND.
Using the TP-Link TD-W8960N instead of the BT home hub
You can ignore the DNS settings and leave them at default, if you do not want to use OpenDNS.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

Jumping gun? Netgear N300 Wireless ADSL2+ modem/router

Hi,
I'm probably jumping the gun here but I've got a Verizon Actiontec GT704WG modem/router and have been disapointed in the last few months by spotty wireless and internet connectivity when nothing else in my house has changed. In addition, I need to make a non-network-ready external HD a network drive so either have to have a NAS adapter (incredibly difficult to find at a local store) and I'm awaiting information on whether or not I have to format (again) my already FAT32 file system drive for an adapter to recognize the drive or whether or not the adapter will work without re-formatting my drive. The work around is the Netgear N300 Wireless ADSL2+ modem router because it will allow me to attach the non-network ready drive without an additional NAS adapter.
However, after reading all the problems that people have with third-party modem/routers and Verizon DSL I'm a little concerned about trying to hook this up as a solution. So I have some questions:
1. Do I have to put the Actiontec GT704WG into bridge mode as Verizon recommends or can I get rid of the Actiontec altogether and just use the new modem/router?
2. I have no idea if I have ADSL+ service with Verizon. Assume I can call and find out or get the info from my account page. But if I do not have that service, will the new modem/router work with basic ADSL service that Verizon provides (ok, that's my really dumb question)?
3. If it's better to just stick with the Verizon modem/router and get a NAS adapter does anyone have a recommendation on a reasonably priced adapter? I don't want a NAS enclosure as I'm not really interested in breaking my external drive and removing the guts so I'd prefer a stand-alone adapter.
4. If I can get rid of the Actiontec altogether, can someone provide some assistance for the proper settings to get me setup without too much fiddling? I'm so sick of spending hours trying to troubleshoot computer issues!
I have an older PC wired into the Actiontec, a network printer attached to the Actiontec, and am running windows XP pro on the PC and have a laptop that is running windows 7. Evil Empire Microsoft has made the lovely choice to make it difficult sometimes for the two OS to communicate and I'm tired of leaving the PC on all the time so that I can use my external drive (if Win7 cooperates) as a network drive through the PC. I'd rather have it as a real network drive operating independently of the PC and point my iTunes, word processing, and database programs to the network drive rather than trying to get them to run through the PC into the external drive.
I wish Verizon would offer more choices on modem/routers, especially ones that offer you the option to add a usb storage device as a network asset!
Thanks for any help! I know I'm jumping the gun a bit, but I'd like to return the new modem/router ASAP if it's not going to do what I need without tons of hassle.
Solved!
Go to Solution.

Since the Netgear you have is a DSL modem, there is no need to use the ActionTec. Disconnect it from the line and keep it around as a spare modem should you ever need it for troubleshooting purposes. Also, even though the modem you are buying is marketed as an ADSL2+ modem, the technology is specced to be backwards compatible with traditional ADSL. The ActionTec you currently have is an ADSL2+ modem itself, so that should back up that statement enough. The only thing you need to make sure you verify before switching the ActionTec out for the Netgear is what authentication mode the ActionTec is using. This can be set to either PPPoE or DHCP (shows as Routed Bridge mode) and should show up on the main status page when you visit the ActionTec's web inteface. If you're using PPPoE, you should have no issues getting the Netgear to work. If you're using DHCP, you will need to either close the MAC address of the ActionTec into the Netgear, or leave the modem overnight before you are able to obtain an IP address.
Otherwise the Netgear depends on how you decide to set it up. If you set it up through the Web Interface (http://192.168.1.1/ for Netgears, normally), you need to make sure the DSL Virtual Circuit is set to use 0/35, VPI of 0, VCI of 35. The modem should auto-detect this on first boot. Additionally, if you're using PPPoE you'd need to use your Verizon Username and Password to connect the modem. If you set it up using the Setup CD, it should do all of that heavy lifting.
ReadySHARE (what you're looking to set up with the External Hard Drive) uses the same Windows File and Sharing setup, however it does it using Samba shares, FTP and HTTP since the router runs Linux. The reliability you see might remain the same, but I suppose it's one of those things you need to wait and see how it works once the router is set up. Just remember, the speeds to the drive will not be as fast as going through a PC with better hardware under the hood.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Bought an ipad 2 for christmas but it won't connect to my wireless. My modem/router is an Arris 653 B eurospec DOCSIS. The wifi works on an unsecured network I have in the bldg but not my own network. Anyone have any suggestions?

Bought an ipad 2 for christmas but it won't connect to my wireless. My modem/router is an Arris 653 B eurospec DOCSIS. The wifi works on an unsecured network I have in the bldg but not my own network. Anyone have any suggestions?

I'm not familiar with your router but are there any buttons on the front or back of it because sometimes you need to pair the router in order for your PC, laptop, phone or iPad to connect wirelessly with it?
From the routers I have used there are normally two buttons on the front or back (apart from the power button), pressing one of them allows you a few minutes to enter the required password on your iPad. Best look at the instructions for the router.

Does Timecapsule work with the new xfinity wireless gateway 1 modem / router?

My husband hooked up the new xfinity wireless gateway 1 modem / router today and now I can't access my Timecapsule to back up my Mac. Comcast has not been able to help me...and they can't get me back on our old Comcast modem so I can access my Timecapsule, which has worked fine for several years. Can anyone offer a solution?

Thanks for the suggestion. I have no idea why but all of a sudden the Time Capsule backed up my Mac before I had time to do as you suggested...although the back up process was very slow. I'll see if it gets faster over the next few days...will resort to your suggestion if needed. Thanks again!

D-Link DSL-2740B W'less-N Modem Router: Underwhelming & BTMM not supported

I recently purchased the D-Link DSL-2740B Wireless-N Modem Router, hoping to be blown away by the new N-protocol for Wireless, carefully ensuring that UPnP was supported (on the box) before spending my money, (in order to use Back to my Mac). Sadly not only was I underwhelmed by the unnoticeable difference in wireless range and speed, but with UPnP dutifully enabled, Back to my Mac simply would not work. No amount of calling Tech support or fiddling with settings made any difference.
Also the setup CDROM was only PC-compatible, so you have to use a web browser interface to setup, but only after you've worked out what the setup screen's IP address is from the sketchy B&W install manual.
I would conclude that zero thought at D-Link has gone into making this hardware a tool for the 12% and rapidly growing pool of Mac users. If you have a Mac, do not buy. Any differing experiences with this hardware?
Message was edited by: Mac Packer

I just had the wonderful experience of buying a new D-link modem router with the intention of being able to use Back to My Mac. No such luck. I enabled UpNP and NAT, but the machine always came up with a fault regarding the NAT or UpNP with the router. Finally, I emailed D-link (I bought the new device on Friday, and D-link won't be at work over the weekend) after tearing my hair out for two days. Their response? The BRAND NEW modem router doesn't work with Back to My Mac. See the actual response below.
"The service “Back To My Mac” will not currently work with the DSL-G604T. It is being looked into, though is not a high priority.
There are other alternatives which can be used for remote viewing of Apple Mac machines over the Interent, from Remote locations."
Well, how's that for support? No mention of an alternative product in their range. Maybe they don't want to sell equipment to Mac users?

Officejet Pro 8500A unable to connect wirelessly to Ubee Modem/Router

I recently upgraded to a new "all in one" Ubee Modem Router (Model DDW366) and have spent hours attempting to wirelessly (both using Wizard and entering info by hand) print, but nothing has worked. The only way I am able to print at this time is by printer cable connected to my MacBook Pro. I'm unable to print wirelessly from my MacBook Pro, iPhone and iPad.
HP will not advise me on how to solve this problem as printer is no longer under warranty and Cox Cable who sold me the Modem/Router combo are not willing to assist with this problem.
Can anyone advise me on how to print wirelessly again?

Hello @drlogan0,
Welcome to the HP forums.
I understand that you are encountering problems with getting your Officejet pro 8500A onto your new wireless network.
I would like to help.
i would try restoring the network defaults. This will help erase any 'old' information that may be stuck in the printers memory. I would like to give you specific steps for this, but I am unsure if you have the 8500A, 8500A wireless, or the 8500A premium.
Basically the steps are, go into the network menu, and select restore network defaults.
If you have tried restoring the network defaults already, please review the following troubleshooting documents.
Setting Up the Printer for a Wired or Wireless Network for the HP Officejet Pro 8500A
Printer Does Not Maintain Wireless Connection
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

C7280 All-in-One connected wirelessly to a modem-router needs a password when powered-up.

Do you have any examples of wirelessly connecting an HP Photosmart C7280-All-in-One to a network run by a NetComm NB6Plus4W modem-router? The modem-router also attaches a Windows XP desktop computer using an ethernet cable and a Windows XP laptop computer wirelessly using the default SSID (wireless) and password (a1b2c3d4e5).
The wireless connection between the modem-router and the laptop comes up automatically when the modem-router and laptop are powered-up.
The wireless connection between the modem-router and the HP Photosmart does not establish automatically. When I power-up the HP Photosmart I then have to use the setup button on the Photosmart and manually type in to the Photosmart the password (a1b2c3d4e5). The SSID displays as wireless, it does not have to be retyped.
Do you know if there is any NetComm or HP configuration which will cause automatic setup of the HP Photosmart to occur when it is powered-up?
What I am complaining about is having to manually type in the HP's password to the HP whenever the HP is powered-up.
This question was solved.
View Solution.

The information that i gave was based on the info you provided, and only told you what steps would work. Troubleshooting process does involve guesswork as the issue that you're facing could be caused due to many reasons, and doing each and every step is a process of eliminating all the possible causes and narrowing it down to one particular cause. If you don't like what I have to offer, then feel free to not follow it. Lets see how fast you can get it to work on your own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

I have a netgear n300 wirless adsl2 modem router and i can't connect to my i pod touch help please

i pod touch won't connect to my netgear modem router (n300)

haghop,
Do you have a base airport station? What is your internet setup? Is this simply an Airport express that will not be connected at all to a modem with internet access?
Based on what you've said, I'm guessing the answers to the above questions are yes. If so, you'll want to make sure it's set to factory defaults. Hold in the reset button with a paper clip until the light begins to flash. Let it restart and quit flashing. (I'm sorta newbieish, I don't think you're gonna see a green light, I think that means "internet access" However, I think you should see solid amber)
After it's quit flashing, choose your airport station from the Airport dropdown menu in the menu bar. Go to Airport Setup assistant in utilities. Your new AX should show up and be ready to be configured as a plain ol' iTunes streamer.

Help needed with Wireless ADSL2+Modem Router setup

I have a iMac 1GHz PowerPC G4 running 10.3.9 with all of the latest software updates and have just purchased a Netgear DG834G. I am currently using an USB modem and now need wireless internet access for remote working via an IBM Thinkpad.
I have tried to follow the Netgear manual but to no avail. Unfortunately, my ISP was unwilling to help with setup as they didn't supply the router! Typical! Anyway they gave me some settings which might as well be in a foreign language ....
Virtual Path Identifier VPI = 0
Virtual Channel Indentifier (VCI) parameters = 38
ISP Domain Name Server (DNS) Addresses apparently will be automatic
Fixed or Static IP Address is automatic
Protocol = PPOA - is this correct?
Encapsulation =VCMUX
Any advice and screenshots would be greatly appreciated as I am absolutely stuck.
iMac 15 G4 Mac OS X (10.3.9) Lacie Triple D2 160GB + 5G 30gb iPod

Fixed - told myself to RTFM!

Does Linksys Make a Wireless-N Cable Modem/Router Combo

Does Linksys make a wireless-n gateway router, a combination router and cable modem?
I currently have the combo device for wireless-g but want to upgrade to wireless-n.
Thanks!
Solved!
Go to Solution.

I think at the moment Linksys does not sell 802.11n gateways.
I generally recommend not to get combo devices but better get two separate devices, one simple modem and a wireless router.
1. You have a far larger product choice for the router and they are usually cheaper.
2. If the router dies you can still have internet through the modem directly. If the combo device dies you are offline.
3. Less functions in a device makes simpler design and in average more stable and reliable devices.
4. You can replace either device at any point. For instance, if you switch from cable to DSL or FTTH you can simple replace the modem. You may have to change the internet connection setting on the router but other then that you can keep the router. Likewise, if in two years from now you want to get the next-generation wireless router you can keep using your modem (if it is still fit for your internet speed)
Just some to think about...

Hooking up/configuring a WRT54G2 wireless router to my wired modem/router.

Problem description: I have bought a wireless router (Linksys WRT54G2) in order to connect it to my ADSL2+ modem/router (a TP-Link TD8840) to provide wireless internet access to my iPhone and laptop. I only intend to power on the wireless router when I need it, not have it on all the time wasting electricity.
Attempted fixes: Configuring the WRT54G2 per the install CD, but this appears to mean I must have my wireless router always powered on in order to access the internet even when I'm not using the wireless. Ideally I just want to turn on the wireless router as and when I need it.
Operating system: Windows XP Pro (32-bit) SP3.
So, as my description says, I bought a WRT54G2 so I can browse the web on my iPhone using my DSL connection rather than the cellular (3G) network. I currently have the WRT54G2 plugged in from one of its four ethernet ports to an ethernet port on my wired modem/router. The IP of my modem/router is 192.168.1.1, which also appears to be the default ip for the WRT54G2 So I can't access my WRT54G2's admin screen to properly set up the network.
At this point I feel as if I should reset the WRT54G2 to factory settings and start from scratch, but I lack a coherent set of instructions to point me on my way. It's a bit frustrating because I'm pretty good with computers generally, but networking obviously is not my thing. Can anyone please help

Hi modeski,
To setup your WRT54G2 router and make it work with your modem/router there, chnage first the IP of the WRT54G2 from 192.168.1.1 to 192.168.2.1 before you connect it to the modem/router.
In other words, you are cascading two routers.
Hope this help!

Is a Happy Marriage Possible? New Airport Extreme & ADSL Modem/Router

Is a Happy Marriage Possible? New Airport Extreme & ADSL Modem/Router
1. I’m writing from a rural town in Southern Nepal, very close to India. I’m planning to create a new WI-FI network at a small monastery here. Ideally, we will have two parallel wireless networks: the first network produced by an ADSL router/modem and a second network produced by another router in “repeater” mode.
2. Earlier, someone suggested that, when I post a question, I should provide as many details as possible about the situation here. Forgive me if there is “too much information”. I have to make a trip to the US to buy new networking equipment, so I very much want to get this right. Once I return here, I’ll be pretty much stuck with whatever I get in the US.
3. The future routers will live next to each other in an office and could be linked by a cable (if this is the best route to go). We do not wish to “expand” the network (in the sense of making a larger WI-FI network), but rather wish to simply have two networks, hence one ADSL router/modem and one router with the “repeater” function (out-of-the-box without any jerry rigging). Both WI-FI signals need to travel approximately 100 (largely unobstructed) feet.
4. If my dreams come true, the second router would be an Apple Airport Extreme (AX). An Apple router would be ideal because my experience with Apple routers is happy: they are easy to set up, reliable, and secure. Moreover, we use Apple computers and iOS devices here (and the new AX has the “ac” thing which will be preferable as we replace old machines with new ones).
5. Yet, from reading posts and having my prior questions answered on this website, it may be that with an ADSL modem/router, all the ease and happiness of the Apple ecosystem is lost: while Apple routers seem to connect with each other easily, problems appear to arise when users try to inter-marry our non-Apple products with Apples.
6. Our current, super-crappy 2wire 2701hg-t (ADSL modem/router) covers the 100-foot distance without a problem when it is working and there is Ethernet flowing to us. Frequently, our connection is very bad, and I may be unfairly judging the 2wire 2701hg-t. But, based on user reviews on the America Amazon.com, the 2wire 2701hg-t is pretty terrible: first it is simply old and second, among other problems, it seems to have a poor quality power supply unit. I do observe that it frequently seems to be recycling from scratch as if it had turned off and restarted. In any case, we are replacing it since it may be about 4 or 5 years old.
7. In previous posts on this forum, “LaPastenague” responded to some of my earlier questions about AX and ADSL. Among other things, he pointed out that (1) line-attenuation may be contributing to our poor connection and (2) we must choose a modem/router that is suitable for “long lines.” I’ve looked at our current modem/router statistics page; however, there are no statistics for line-attenuation or noise. (As you will see below, my strategy is to get the “better” modem/router that is suitable for long lines.)
8. Concerning our ADSL service, these are the facts I’ve gleaned from looking at the current router’s configuration pages:
Connection Type: PPPoE
Currently, the router is configured to use WPA-PSK security.
Connection Speed: Incoming: 1024 kbps & Outgoing: 509 kbps
(The following information may be unimportant at this time.)
Broadband Link Diagnostics:
DSL Synchronization: UP
G.DMT Signal: UP
PVC Connection: UP
PPPoE Service: UP
PPP Authentication: UP
IP Connection: UP
DNS Communication: UP
9. The ISP (Nepal Telecom) doesn’t supply a modem/router; however, they do have a list of (at times ancient) hardware and hardware vendors:
http://www.ntc.net.np/internet/adsl/adsl_vendersConf.php
10. Concerning what equipment is available here, what I have observed is that generally the ADSL modem/routers for sale locally, and in the far-away capital Kathmandu, and in nearby India are often also available in the United States, but they are the cheaper, older models. I will have to buy the new equipment in the US this year. At a different institution nearby, they are using the TP-Link modem/router td-w89016 which they purchased locally, I believe.
11. Based in part on LaPastenague’s earlier advice, I want to buy the TP-LINK TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router (2.4GHz 300Mbps+5Ghz 300Mbps, IPv6 Compatible). This appears to be the most popular ADSL device on Amazon now.
Will this modem/router work EASILY with the Airport Extreme in the manner I’ve described? That is, connecting the two with a cable and creating two WI-FI networks.
12. Also, is it generally correct that the best way to connect them is with an Ethernet cable: https://discussions.apple.com/message/23759755#23759755
13. In fact, does connecting them with a cable help alleviate some of the problems that can occur between the Apple device and the ADSL modem/router?
14. If this will work, what “mode” will the AX device be in (again, in order to have two separate networks with separate passwords)? I have heard of the “repeater”, “roaming” , and “bridge” modes.
15. Are there two levels of passwords which need to be considered? Of course, there is the network and network passwords which we create here and which will be different. But, does the Apple also have to have the ISP password like the principle ADSL modem/router?
16. To set this up, what information do I need from the ISP (e.g., passwords, IPs…)?
I think there are a lot of good reasons to use an AX router. Of course, if it is just going to be very cumbersome then, we would be loosing one of the best parts of using Apple products. So, whoever feels knowledgeable enough to reply to this post, please be sincere if you think it is better to avoid the Apple. Apple can rest assured that I will buy other things from them!
In that case, I’d likely buy a second TP-Link device to create a second network:
TL-Wa801NP [AP Mode Multi-SSID Mode AP Client Mode Repeater Mode (WDS / Universal) AP+ Bridge mode (point-to-point / point to Multi-point)].
Thank you in advance. Long live Apple!
Message was edited by: Jess1911

I am not sure if there are different interfaces but my 2wire does an excellent job with line info.
I get into this from browser.. using main IP.. in my case 10.0.0.138/MDC
In your case it should be whatever the IP of the 2wire is, followed by /mdc
Give it a try.
As you can see it shows vendor and loads of info about the line.
I rate it the best domestic modem for line info.
A good modem actually albeit a lousy router.
MDC is the diagnostics and Management Console.
3. The future routers will live next to each other in an office and could be linked by a cable (if this is the best route to go). We do not wish to “expand” the network (in the sense of making a larger WI-FI network), but rather wish to simply have two networks, hence one ADSL router/modem and one router with the “repeater” function (out-of-the-box without any jerry rigging). Both WI-FI signals need to travel approximately 100 (largely unobstructed) feet.
You are not repeating.. you are simply setting up two routers which are interconnected, so one is dependent on the other.. ie one is your adsl modem router and that will take the main router function. Your second router is really not working as a router, but as wireless access point (and switch if you plug things in).
That is perfectly fine. You are not roaming in this case since both routers are running different wireless names and networks.. but they are actually using same IP range.. all devices are on the one IP network with two different wireless access points.
4. If my dreams come true, the second router would be an Apple Airport Extreme (AX).
Apple router is fine for this. Easy to configure out of the box.
5. Yet, from reading posts and having my prior questions answered on this website, it may be that with an ADSL modem/router, all the ease and happiness of the Apple ecosystem is lost: while Apple routers seem to connect with each other easily, problems appear to arise when users try to inter-marry our non-Apple products with Apples.
The problem arises when you try and interconnect using wireless extend or repeater.. you are not using wireless to extend, you are using ethernet. Wired has no issues.
11. Based in part on LaPastenague’s earlier advice, I want to buy the TP-LINK TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router (2.4GHz 300Mbps+5Ghz 300Mbps, IPv6 Compatible). This appears to be the most popular ADSL device on Amazon now.
Will this modem/router work EASILY with the Airport Extreme in the manner I’ve described? That is, connecting the two with a cable and creating two WI-FI networks.
It is a good choice.. It should be fine considering how poor your line is.. this modem is proving to have a couple of bugs.. it does not handle torrents well but I would suggest your system is not being used for that purpose. It has some port forwarding issues. Again you are probably not going to overload it.
12. Also, is it generally correct that the best way to connect them is with an Ethernet cable: https://discussions.apple.com/message/23759755#23759755
Absolutely best.. only decent method.
14. If this will work, what “mode” will the AX device be in (again, in order to have two separate networks with separate passwords)? I have heard of the “repeater”, “roaming” , and “bridge” modes.
Bridge. Although if it gives issues there is another method, although rather complex to setup.. not something to worry about now.
15. Are there two levels of passwords which need to be considered? Of course, there is the network and network passwords which we create here and which will be different. But, does the Apple also have to have the ISP password like the principle ADSL modem/router?
Only the adsl modem has the ISP authentication.. it is the box that does the link. The TC just piggy backs.
The passwords on the TC are for its Admin, wireless and disk access.
16. To set this up, what information do I need from the ISP (e.g., passwords, IPs…)?
For ADSL you must have the PPPoE authentication username and password.
So, whoever feels knowledgeable enough to reply to this post, please be sincere if you think it is better to avoid the Apple.
hmmm.. I am biased because I see the issues not all the good stories..
The latest airport and Time Capsule seem to have a few pretty severe bugs.. if they happen to hit you, they are extremely hard to fix if you are in the middle of Nepal. And Apple service centre is a long long way away.
I cannot answer your question from the point of view of a person on the ground in remote area. If the economics of the purchase works for you, great. Go for it.
In terms of wireless coverage.. the Asus AC models or Netgear R7000 kill the Apple. Sorry but it is just fact.
See reviews here.
http://www.smallnetbuilder.com/lanwan/router-charts/bar/113-5-ghz-dn-c
That is average.. if you look at the apple router in the worst location by changing the filters, it comes out worse again.
I cannot post the URL to our local forum here.. (apple doesn't allow it). But in testing with apple clients the asus still beat Apple router soundly.
Pure wireless range is not the only consideration.. but in a mixed environment and since the wireless on the 8980N is not too bad.. then buy Apple router for apple client devices makes good sense.
Maybe the older Gen5.. or two of them.. would do a better job.. with a bit more tested and known hardware.
One thing you do need to check.
Routers from every other brand allow you to select country. Any country from anywhere in the world. Apple routers do not.
If you buy an airport in North America it is coded to North America and offers just a few countries.. USA, Canada I suppose.. what else is North America??
You cannot change it to Nepal.
To get the one for Nepal you must buy the model that covers, South Asia I guess.. I am not sure which it is.
See what the license information is for wifi in Nepal as it might be very different to US and therefore illegal for you to run it in Nepal.
If only the whole world would just bow to America.. we could all follow the FCC regs..
http://en.wikipedia.org/wiki/List_of_WLAN_channels
This only applies to the Apple.. the TP-Link etc allows you to choose Nepal or correct country regulations for wifi.
Buying modems has one tricky bit.. that the actual adsl ATM channel is different in different parts of the world. No modem is usually impossible to setup but some can be difficult if it is pre-configured for US.. this is easy to overcome generally as you can download a firmware for another locality, so you can have local settings.

X3500 to be connected via a wired VDSL modem/router

Hey, I just got myself the X3500 ADSL2 modem/router just to use it as a wireless router (got it 2nd hand, good price).In order to use the bandwidth I have, I got myself a separate Huawei wired modem/router just to use it as a VDSL2 modem.The thing is that I'm having a hard time to configure this simple setup.After using the live chat, I have just figured out that the X3500 router capabilities can not handle the VDSL2 bandwidth, is that so?What I did was setting the Huawei modem/router to be the only DHCP, plugged one of the the Huawei LAN ports to the Cable (WAN) port in the X3500 router and set the DHCP service in the X3500 to disabled.I have tried to set the X3500 to a briged mode only, didn't help much.Any idea about this simple but yet so annoying setup? Thanks!

It looks good and the WAN Subnet mask is fine too. From a computer (Mac or PC) connected to the X3500 via Ethernet run the below command prompt\terminal commands and post the results: PC:ipconfig /allping www.yahoo.com -n 40tracert www.yahoo.com Mac:ifconfigping -c 40 www.yahoo.comtraceroute www.yahoo.com

Wireless ADSL/ADSL2/2+ Modem Router - which one?

I've been a dedicated Mac man for many years, and my trusty old white dome shaped Airport sits on my shelf next to my Netgear DG814 ADSL modem - gathering dust . . . but alas it's time to turn off those flashing green lights for good very soon now - technology has finally passed them by . . . I need more speed!
So I'm looking for a new Wireless ADSL/ADSL2/2+ Modem Router.
Knowing very well that the world revolves around Microsoft, I'd be grateful for some input into which of these new techno-products available on the menagerie of computer sites (few mac specific one's though), actually work with OSX 10.6.2 and the newer Intel iMacs without too many problems?
I've been doing a bit of roaming around the web tonight, and saw this beauty, only to have it knocked back by several other forum posts:
http://www.dlink.co.nz/Products.aspx?Sec=3&Sub1=18&Sub2=81&PID=294
Any comments, suggestions, or even passing of the time of day . . . . greatly appreciated!
Which one will do the job?
I have:
A small network with 4 macs connected (all wireless). . . and of course, everyone needs access to the 2 USB printers, and the internet (via the built-in Firewall in the ADSL Modem).
Looking forward to your feedback and recommendations!
Thankyou!
(Have a good 'un!)

Robert,
Thanks for the great link, the Draytek is not one I've come across before, hence my reason for making the post in the first place. I've been a bit out of the loop for the last few years, and I know ony too well how fast things move. So it's great to get some recommendations from others, to see what's currently available!
It certainly has a fantastic spec, much more than I currently need, but I'm looking for future proofing, so this would be ideal! Any idea if there would be any issues using this in New Zealand? I bought all my current gear out from the UK about 6 years ago, plugged in and it all worked flawlessly, so I'm hoping if I purchased one of these, & had it shipped out, I'd have the same uneventful experience?
Thanks for taking the time to post!
Have a great day!
Steve

What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2 modem and I can't get the configuration working. What modem does Apple recommend?

I am having problems setting up airport extreme.
What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2+ modem and I can't get the configuration working. What modem does Apple recommend?

Ok well I have looked around some more and have found this to be the most up to date official response to my question as seen at this link here:
http://www.actiontec.com/support/product_details.php?pid=41#q27
Can I Bridge the Actiontec MI424WR router that Verizon provided, when I signed up for FiOS service?
The MI424WR does not have a bridging option, and neither Verizon nor Actiontec support attempting to bridge it.
The desire to bridge the MI424WR is based on a misunderstanding that it is a modem as well as a router. Actiontec does produce DSL Gateways that have a Transparent-Bridging option, which bypasses or disables the router function and allows the Gateway to act simply as a DSL modem, when it is enabled. Many consumers do not realize that with FiOS, the ONT (typically outside the home) is the device that handles changing the FiOS signal from Fiber to either Ethernet or Coax, and that the Router is just a Router, and if it was bridged or bypassed, it would be a device without a function. For most Verizon FiOS customers their service would completely stop if the MI424WR was bridged, because the Video on Demand service is dependent on it to work.
If your ONT is connected to the Actiontec MI424WR router via Coax, the MI424WR is required due to the Coax connection. But if the ONT is connected to the MI424WR via Ethernet, then in most cases some other router can be substituted for the MI424WR, and it can be removed."
So it looks like I will be calling Verizon support to see about getting the Ethernet connection installed and getting another modem...

TP-Link TD-W8961ND Wireless-N ADSL2+ Modem Router ...

Similar Messages

Maybe you are looking for