TP-Link TL-WN851ND driver clash

the card was famous for clashing in Win8. I found the right OEM driver (the chip manufacturer one) but the Win 10 system so genius not to install it
486~Haswell user

Hi Matt86,
Please understand this device driver only supports on WinXP/Vista/7, we cannot ensure it would works well on Windows 10 Technical Preview:
http://www.tp-link.com/lk/support/download/?model=TL-WN851ND&version=V1#tbl_a
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
To get the detailed information about the rejection, you may check the setupapi.dev.log, which we can see the driver rank score:
Driver Rank Information in the SetupAPI Log
http://msdn.microsoft.com/en-us/library/windows/hardware/ff544849(v=vs.85).aspx
Driver Rank Example
http://msdn.microsoft.com/en-us/library/windows/hardware/ff544846(v=vs.85).aspx
Alex Zhao
TechNet Community Support

Similar Messages

How do I link a google drive edge animate project to an iframe?

I have a simple edge animate project as a test. It has the following files in the root:
edge_includes folder containing 3 images and edge.5.0.1.min.js
project.html
project_edge.js
I want to be able to have these files stored on google drive (or dropbox or alternative) and link to them through an iframe on my website. I've tried doing this by keeping the file structure the same on google drive and just referencing the shared link of the html file, but the project will not work.
I've also tried replacing the src links of the edge.5.0.1.min.js file and the image files to their shared links on the google drive. This didn't work either.
Is there any way to host the files externally and have them still reference each other properly so the html file can be linked into an iframe on a different site?
Many thanks in advance
Barry

Just to add the relevant requested information:
I am using the latest version of Edge animate (2014.1)
Google chrome (and IE desktop not metro as backup)
If anyone wants to see the file then I'm happy to link to it, but I don't think the question really warrants it.
Thanks again.

MacBook Pro C2D, Bootcamp, Windows XP Pro SP2, D-Link DWA-645 Driver

I just did a test by installing the D-link DWA-645 drivers in Windows XP running under Bootcamp and connecting to the new AirPort Extreme 802.11n base station to see if I can get the higher speeds. I can confirm that the D-link driver does enable the 802.11n capabilities under this environment. It works at both 2.4 and 5.0 GHz.
Both the MacBook Pro (as well as a few other recent Macs) use the Atheros AR5008 chipset for their wireless connectivity. Until Apple updates the Bootcamp drivers or Windows this seems to be a good workaround to get the full speed out of the 802.11n chipset in Macs under Bootcamp.

I have the same computer and the same issue in Bootcamp. I haven't noticed any correlation with a context menu however. Hoping for an updated driver soon to fix this...

Link to Network Drive with Spaces

I need to create a link in SharePoint 2010 that points to a network drive with spaces in the title. SharePoint substitutes %20 for spaces, but I need the space character.
For example:
file:///\\company\foldername works
file:///\\company\folder name does not work, it becomes
file:///\\company\folder%20name
Has anyone run into this issue before?

Hi Andy,
20% represents space in url encoding and it is hardcoded. I don’t think it is better to remain space character in the link.
http://en.wikipedia.org/wiki/URL-Encoding
Here is a thread discuss about that:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5cc9881d-e72c-434f-be07-bd6d2a74eec6/sharepoint-file-issue-20-replaces-space-in-file-name?forum=sharepointadminlegacy
http://www.networkworld.com/article/2221731/microsoft-subnet/simple-naming-conventions-that-improve-end-user-experience-in-sharepoint-sites.html
Regards,
Rebecca Tu
TechNet Community Support

Linking to Shared Drive in InDesign

I know how to create Hyperlinks in InDesign, but what if I want the user/reader to be able to click on a Shared Drive link that will take them directly to a particular shared drive folder on a company’s shared drive? Is this possible? It’s not an “http” link, it’s totally different, so I can’t select the URL option…

Welcome to our community, Dennis
You might try first clicking the down arrow to the left of
where the Hyperlink information goes in the Hyperlink dialog. From
there, choose File... Then type the \\servername\folder in the File
Name field.
If that fails (and it may) you may wish to consider using a
Redirect page to link to the file.
Cheers... Rick

Help in compiling/linking a DEVICE DRIVER in SOLARIS10 x86

hello!
PROBLEM:
++++++++++++++++++++++++++++++++++
i need assistance in compiling/linking a video capture
driver (bt848x) (http://bt848x.sourceforge.net/) for
solaris 10 x86.
the driver uses the /usr/lib/libc.a (specifically the _xtoll.o)
which, if im not mistaken, is not available in solaris 10
anymore. so how am i going to compile it?
BACKGROUND:
++++++++++++++++++++++++++++++++++
the original compile/link code in the makefile is:
/usr/ccs/bin/ld -o bt848x -r bt848-cards.o bt848-driver.o
bt848-kern.o i2c.o tuner.o sound-tda9875.o
sound-msp3400.o _xtoll.o
i modified it to:
/usr/ccs/bin/ld -o bt848x bt848-cards.o bt848-driver.o
bt848-kern.o i2c.o tuner.o sound-tda9875.o
sound-msp3400.o -L/usr/lib -lc
(NOTE: i removed the -r and _xtoll.o; and added
-L/usr/lib -lc)
the output was:
Undefined ____________ first referenced
symbol ______________ in file
mod_install bt848-kern.o
delay bt848-cards.o
ddi_get_instance bt848-kern.o
nodev bt848-kern.o
ddi_create_minor_node bt848-kern.o
ddi_regs_map_free bt848-kern.o
pci_config_getw bt848-driver.o
pci_config_getb bt848-driver.o
ddi_soft_state_zalloc bt848-kern.o
ddi_dma_unbind_handle bt848-kern.o
kmem_alloc i2c.o
cv_broadcast bt848-driver.o
ddi_remove_intr bt848-kern.o
ddi_get_soft_state bt848-kern.o
mod_driverops bt848-kern.o
ddi_get_lbolt bt848-cards.o
mutex_tryenter bt848-kern.o
ddi_get_iblock_cookie bt848-kern.o
nochpoll bt848-kern.o
ddi_copyin bt848-kern.o
mod_info bt848-kern.o
ddi_remove_minor_node bt848-kern.o
nulldev bt848-kern.o
ddi_dma_sync bt848-driver.o
ddi_dma_addr_bind_handle bt848-kern.o
mod_remove bt848-kern.o
ddi_prop_lookup_int_array bt848-cards.o
_pagesize bt848-driver.o
ddi_prop_op bt848-kern.o
ddi_dma_free_handle bt848-kern.o
ddi_set_driver_private bt848-kern.o
cv_wait_sig bt848-kern.o
ddi_intr_hilevel bt848-kern.o
ddi_regs_map_setup bt848-kern.o
pci_config_teardown bt848-driver.o
ddi_dma_mem_alloc bt848-kern.o
ddi_copyout bt848-kern.o
cmn_err bt848-cards.o
ddi_dma_alloc_handle bt848-kern.o
ddi_prop_exists bt848-cards.o
cv_init bt848-kern.o
pci_config_setup bt848-driver.o
cv_destroy bt848-kern.o
timeout sound-msp3400.o
untimeout sound-msp3400.o
devmap_umem_setup bt848-kern.o
ddi_prop_get_int bt848-kern.o
uiomove bt848-kern.o
kmem_free i2c.o
ddi_add_intr bt848-kern.o
ddi_report_dev bt848-kern.o
getminor bt848-kern.o
mutex_exit bt848-driver.o
ddi_prop_free bt848-cards.o
ddi_soft_state_fini bt848-kern.o
ddi_soft_state_free bt848-kern.o
ddi_soft_state_init bt848-kern.o
mutex_enter bt848-driver.o
ddi_mem_putl bt848-cards.o
ddi_mem_getl bt848-cards.o
drv_usecwait bt848-cards.o
drv_usectohz bt848-cards.o
ddi_dma_mem_free bt848-kern.o
ld: fatal: Symbol referencing errors. No output written to bt848x
QUESTIONS:
++++++++++++++++++++++++++++++++++
1.) What other libraries do i need to include so that
there would no more "symbol referencing errors" ???
2.) Is my linking code correct?
/usr/ccs/bin/ld -o bt848x bt848-cards.o bt848-driver.o
bt848-kern.o i2c.o tuner.o sound-tda9875.o
sound-msp3400.o -L/usr/lib -lc
i mean, is it ok to build a driver with dynamic libraries?
or the device driver should always be statically linked?
COMPUTER SPECS:
++++++++++++++++++++++++++++++++++
Solaris 10 (6/06 release)
SunOS 5.10 Generic_118844-26 i86pc i386 i86pc
Pentium 4 - 1.4GHz
1GB RDRAM
32 BIT
Video Capture Card: PixelView PV-BT878P+FM.RC (rev.9F)
thanks!!!
-kllc

i think i already found the answers to my questions
(i partially read SUN docs WRITING DEVICE DRIVER in
http://docs.sun.com/app/docs/doc/816-4854 specifically
the BUILDING A DEVICE DRIVER) =)
i used:
/usr/ccs/bin/ld -o bt848x -dy -r bt848-cards.o bt848-driver.o
bt848-kern.o i2c.o tuner.o sound-tda9875.o sound-msp3400.o
-L/usr/lib -lc
(NOTE: i used the flags -dy -r -L/usr/lib -lc)
so far, the TV-TUNER is working hehehehe!!
any comments/suggestions/tips from other people are still welcome!
thanks!!
-kllc

IOCTL's from a static library linked to KMDF driver

Hi,
Im trying to build a static library that can be used across multiple KMDF drivers. The library needs to send IOCTL's to another driver to access required functionality.
The library does not have access to the Wdf device object/objects of the KMDF drivers it is being linked to.
To send IOCTLs from the library, i thought i would use WdfIoTragetCreate/open and then use WdfIoTargetSendIoctlSynchronously. However, to create the IO target, i require a device object.
I thought i could call WdfGetDriver to get the driver object and create a dummy device object with no callbacks. However, all the examples and documentation seems to indicate that you only call WdfDeviceCreate inside EvtDeviceAdd or EvtChildListCreateDevice callback,
or from a call to WdfPdoInitAllocate.
Is it incorrect to call WdfDeviceCreate from a library which will be used way after the KMDF driver has come up ?
What options do i have to be able to send IOCTL's to other drivers from this static library?
-R___K

You need to pass in the actual device object, one of the many things that WDF does for you is cleanup things like reference counts etc, so you don't want to be using a dummy device object, since you will be entering the area of having to worry about when
to clean it up.
Since it is a static library you can use WDF calls unlike a DLL.
Don Burn Windows Filesystem and Driver Consulting Website: http://www.windrvr.com

Opening Documents in Office Desktop client creates sharepoint links in network drive folder

Hi Guys
Having an issue where if a document is opened from sharepoint or through the explorer window in Office, a "folder" is created in the network drive folder which has a sharepoint link to the document. I realise this is probably a built in versioning
feature of SharePoint but it's becoming a bit of a pain with the sheer volume of links being created. Any ideas how to turn off this feature or bug?
Thanks//

Hi,
Could you capture the screenshot of the "folder"? Please specify the "folder" path in the screenshot.
In my environment, whether I open the document from site UI or open library with Windows Explorer, then open document, there is no folder created.
Please test the issue on another PC and check if it is related to client machine.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

DFS and Windows 7 x64 strange behavior when trying to access a DFS link through mapped drive

I've manually mapped a network drive (Q Drive) to a DFS location. Whenever I go into "My Computer" and open the Q Drive it shows the DFS links but when I double click one of the links it randomly takes me back to the "My Computer" starting point showing my standard drive letters. If I click through the Q drive and the DFS several time it all of the sudden works. Sometimes this circle of clicking can go on for 5-10 times before it works properly.
I'm running the x64 edition of Windows 7. Any suggestions on how to make this work properly? Its very annoying.

GPO mapped namespace where you can't connect through the mapped drive letter but can connect through the DFS UNC namespace? Do you use access based enumeration?
I personally think it has something to do with network bandwidth, the security token and offline files. =)
You can access the namespace itself but not any of the linked shares (try checking the ACL:s on the shares and you get permission denied, but you still see them, ie they are listed).
I found a post sometime ago about corrupted/trunkated security tokens. If the member was part of too many AD groups the token was trunkated and corrupted. That was going to be my next move. Sniff the traffic and see what actually happens when the issue occur
if theres something to be learnt there. Since it works correctly through the UNC adress but not through the drive letter you ough to be able to see what is different between the two requests.
http://blogs.technet.com/b/askds/archive/2008/05/14/troubleshooting-kerberos-authentication-problems-name-resolution-issues.aspx
One thing I noted was that it only happened to remotely connected computers on slow 3G connections (we use Direct Access). Never on LAN-connected computers with GB access or remote computers with fast (>15Mbps) access. We also use folder redirection,
which I think could be part of the problem, ie the share never goes online, atleast for us the issue was itermittent, it never happend all of the time, just from time to time. And if I disconnected and reconnected it could fix the issue for that particular
sessions, usually it didn't but occasionally it did (just pulling the network cable and put it back). Check the offline/online status the folders show up as offline even though they are online.
Enough of my ramblings. Sorry to hear you still have the problem and I hope you find a way to solve it.

TimeMachine won't create hard links for replacement drive if not connected

With TimeMachine, I backup two external drives (let's call them drive A and B). Recently, drive B broke and I restored the data on a replacement drive and gave the volume the same name as the broken one had. I made TimeMachine aware of the fact that this new drive corresponds to the old one by using the "tmutil -a associatedisk" command as described here: http://pondini.org/TM/B6.html
When TimeMachine started the next backup, it did not perform all full backup of the new drive, though still way more than it should. So far so god.
The problem is: if TimeMachine performs a backup while the new drive (the replacement of drive B) is not connected, it does not create the hard links for it. Drive A is not connected either, though hard links for it show up in the Backups.backupdb folder for this backup.
If the replacement drive is connected the next time, TimeMachine will perform a full backup of it ... most likely because the previous backup does not contain any hard links.
Is there a way how to fix this?

paninaro95 wrote:
(To run the command again is actually not necessary in my opinion as the man page for tmutil states that TimeMachine works with the UUID of the filesystem
Correct.
Et voilà 1: The first time, TimeMachine backed up only about 0.5 GB ... which is a fairly reasonable value that is likely due to the changes on the internal disk, not to my external replacement disk where about 170 GB are eligible to be backed up.
Yay!
FYI, there are ways to tell what was backed-up. The log messages show how much was copied from each drive. The widget in #A1 of Time Machine - Troubleshooting displays the backup messages from your logs.
In addition, see #A2 there for a couple of apps that will show the details -- which files were backed-up.
Et voilà 2: When TimeMachine performed the next backup while the external drive was not connected, the hard links for the external data were created in that backup.
Double yay!
To my understanding, I don't understand why renaming the drive makes a difference if TimeMachine uses the UUID of the filesystem.
So I guess there must be a bug somewhere as "tmutil associatedisk" should fix the connection -- no matter what the drive name is.
There must be some other connection, some vestige of the name left over somewhere.
I filed a bug report to Apple! :-)
Great!

InDesign behavior for image links on virtual drive?

When working with local InDesign files and local image links, I get warnings about missing links or modified links in case the images have been removed or updated since being placed in InDesign. When working with InDesign through Adobe Drive, the behavior seems to be radically different.
For instance, I place an image from the virtual Z drive and save the InDesign file on the virtual Z drive.
At a later time, the asset is removed from the DAM system (or moved so it is now mapped to a different local path).
When I reconnect through Adobe Drive and open the InDesign file, I will not get a missing link error, instead the link will appear without a missing link icon but also without a path.
Certain workarounds that we have implemented (e.g. remapping the path on the fly in case the asset has been moved) work when the originally placed image was a local file (i.e. occurs in the XMP with a C: path) but not when the originally placed image was retrieved through Drive (i.e. occurs in the XMP with a Z: path). Of course we would like to obtain consistent InDesign behavior regardless of whether the user connects through Drive or not.
Has this different behavior for InDesign links been documented? Can I get any additional information about it?
Thanks in advance.

In the mean time I have done some more research. Basically the issue I am struggling with can be illustrated with the following simple scenario:
1. Create a new InDesign file and place an image located at C:\Temp\link.jpg in it. Save the file to the C drive.
2. Connect to your DAM through Drive which is mapped to the Z drive.
3. Create a new InDesign file and place an image located at Z:\Temp\link.jpg in it. Save the file to the C drive.
4. Copy both InDesign files without the links to a clean machine (which has no connection with Drive and no images in the C:\Temp folder).
5. Open the first InDesign file. You will get a missing link error as expected.
6. Open the second InDesign file. You do NOT get a missing link error.
7. Create a new image on the clean machine and save it as "link.jpg" in the same folder as the copied InDesign files.
8. Open the first InDesign file. You will get a warning about a modified link with the option to update the link.
9. Open the second InDesign file. You do NOT get a warning about a modified link. You cannot update the link.
So the problem is in steps 6 and 9.
Why don't I get a missing link error in step 6?
What will happen when I try to print the InDesign document at this stage (or try to export to high resolution pdf)?
At this point the high resolution image link is not available so I assume the preview will be used.
However the user is not at all aware of this. This could turn out to be a major issue for our adoption of Adobe Drive.
Thanks in advance for any additional insight you can provide.

LR 3 will not link to external drive since install of Cache file for another program?

Thumb nails link to the new Cache file on the external hard not the original catalog location on the drive. I can find the files on the drive doing a search in LR but each has to be located individually and confirmed and I have thousands. I deleted the Nikon Capture NX 2 Cache file and its contents but the LR file search still comes up (General> Capture NX Cache). General is the name of the HD with the catalog links. 2 Generals show in both program browsers even though the new Cache file was deleted and does not show when you scan the General HD. Beware LR users keep HD dedicated to LR files only!
Can anyone tell me how to get LR 3 to recognize the original General HD?

Error -36 = I/O error
I have this similar issue before with my external HD. The worst case is that suddenly my external HD would not connect at all. Mac OS does not recognize the device. I end up reformatting the whole HD to Mac format.
I guess the problem is that Mac is having problem reading and writing to a windows formatted drive. I have a few thumb drive that will only work on windows pc but not Mac. Couldn't reformatting it under Mac either. Weird...

LINKS ON MAPPED DRIVES

I am trying to insert a Flash file in Dreamweaver - it works
fine on local machine but remote is a mapped drive on network - so
starts with // and I cannot get my flash files to appear just get
red x I have tried links relative to document + root but no success
if it possible to get this to work or should I give up??/
Please put me out of my frustration!!!!

No it is on a school network and network manager does not
want to allocate a drive as it would mean pulling in all teachers
laptop so he has just mapped a drive on which I am trying to get
flash photo scroller swf file to run
code for Flash element is
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0"
width="600" height="500">
<param name="movie" value="PE.swf" />
<param name="quality" value="high" />
<embed src="PE.swf" quality="high" pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="600"
height="500"></embed>
</object>
I have put everything in same folder and flash swf file is
'PE.swf'
I have also tried
\\hs-cur2\media$\HSTC Media Portal\PE\PE.swf
which is mapped drive but will not work
Thanks for quick response...

Home page link in Frame Driver

People,
i have a piece of code in my frame driver which navigates through pages and has a 'Home Page' link.
select 'Brand : Delivery Fulfilment Analysis' brand,
'http://rs2020-1-3:7778/servlet/page?_pageid=159&_dad=portal30&_schema=PORTAL30' url
from dual
union
select 'Brand : Intake Margin Analysis' brand,
'http://rs2020-1-3:7778/servlet/page?_pageid=161&_dad=portal30&_schema=PORTAL30' url
from dual
union
select chr(13),' ' from dual union select 'Brand : Top Level Report' brand,
'http://rs2020-1-3:7778/servlet/page?_pageid=143&_dad=portal30&_schema=PORTAL30' url
from dual
union
select 'Exit' brand, 'http://rs2020-1-3:7778/servlet/discoservlet?_act=Exit' url
from dual
union
select 'Home' brand, 'http://rs2020-1-3:7778/servlet/page?_pageid=101,109&_dad=portal30&_schema=PORTAL30' url
from dual
This code basically gives the users a number of hyper links to click on and navigate through different pages.
When the 'Home Page' link is selected, the frame driver displays the home page in the target window, instead of the entire HTML page.
How can i get the Home Page link to display the page as full screen??
Thanks, Matt.
null

Thanks Michael,
I also found another way of doing this through a dynamic page with JavaScript.
You can specify the Frame driving URL link to point to a dynamic page which has the following code...
<-HTML>
<-HEAD>
<-TITLE>Portal Home</TITLE>
<-/HEAD>
<-BODY>
<-SCRIPT LANGUAGE="JavaScript">
window.parent.location.href = "http://rs2020-1-3:7778/pls/portal30/PORTAL30.home";
<-/script>
<-/BODY>
<-/HTML>
This closes off the frame and ensure the "home" page is displayed in full.
Thanks for your help.... Matt.

Link for USB driver for ideaTab A1000

Hi all,
I am an android developer I want want to use my ideaTab A1000 for my developement. I want to download usb driver software for my ideaTab A1000 . So please provide me the correct link to download the usb driver.
Thanks and regards,
Arun PS

hi ArunPS,
Welcome to Lenovo Community Forums!
If you need a driver for the tablet to communicate like a Device for software Developing then this is what you need
http://pdanet.co/a/
Hope this helps,
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

TP-Link TL-WN851ND driver clash

Similar Messages

Maybe you are looking for