TP tool hangs during installation of PI_BASIS Patch 6
Hello everyone,
I'm facing the problem that I can't get the PI_BASIS Patch (SAPKIPYJ76) installed (on MySAP ERP 2005 on SLES 9). It still does not go on in the phase 'IMPORT_PROPER'. In SM50 the process is in status "On Hold", reason "RFC". There is no error in the regarding logs, and the CPU utilization is near to 0% when no other user is logged in. I have searched through Sapnet and this forum, but couldn't get a hint to solve the problem.
I would be very glad when anybody could help me.
Regards,
Christian
Hi Mike (and everyone else),
i could reproduce the error. When the installation hangs in phase DDIC_ACTIVATION, I can cancel the following work process in SM66:
Work process no. 6
Type BTC
Process ID 8087
Status stopped
Reason for waiting CPIC
Restart Yes
Terminations 1
Waiting for semaphore
When i now cancel the BGD process in SM50, too, the installation will continue normally.
Have you any idea what the reason is?
Best regards,
Christian
Similar Messages
-
Mac OSX Installer Hangs During Installation
Macbook Pro 15"
Core 2 Duo 2.53Ghz
4Gb RAM
9400M
Erased Hard Disk,
Boot from CD
Mac OSX installer hangs during installation
Time remaining remains the same for >3 hours
After clicking get spinny beachball cursor.
What should I do?
Thanks.The installer may actually not be hunging, in my installation on Win XP, I have seen it "pause" at this point for 5 min or more before continuing with the installation to a successful completion, I did not try to do anything to assist it. Try giving it more time and see what happens.
Regards,
Joseph -
SAP ECC6.0 SR3 on Oracl 10 g solaris 10 hangs during installation!!!
Hi,
I am installting SAP ECC 6.0 SR3 with DB oracle 10g OS solaris 10 jdk version java version "1.4.2_16"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)
Java HotSpot(TM) Client VM (build 1.4.2_16-b05, mixed mode)
H/W : T6320 Blade server
Memory : 16GB
during installation at Import ABAP phase while importing last package SAPSSEXC it hung on me there were no error logs as such nor the FS was full...
it resumed after couple of hrs..
but hung again at IMport Java Dump phase
and again no error logs...
so, my concern here is that is there any bug in SR3 or i am not able to find the error logs
the logs i check are:
import_monitor.java.log:
tail -100f import_monitor.java.log
java version "1.4.2_16"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_16-b05, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 26, failed 0, total 28.
Loading of 'SAPSSEXC' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 27, failed 0, total 28.
Import Monitor jobs: running 1, waiting 0, completed 27, failed 0, total 28.
Loading of 'SAPVIEW' import package: OK
Import Monitor jobs: running 0, waiting 0, completed 28, failed 0, total 28.
jload.java.log>>while import java dump phase:
tail -100f jload.java.log
INFO: trying to create table CAF_RT_NUMRNG
Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_NUMRNG created
Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_NUMRNG loaded (0 rows)
Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_PERM_REL
Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_PERM_REL created
Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_PERM_REL loaded (0 rows)
Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_PK_GEN
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_PK_GEN created
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_PK_GEN loaded (0 rows)
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SRVMODULE
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SRVMODULE created
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SRVMODULE loaded (0 rows)
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SVCCFG
Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SVCCFG created
Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SVCCFG loaded (0 rows)
Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SVCDEF
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SVCDEF created
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SVCDEF loaded (0 rows)
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SVCLCK
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SVCLCK created
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SVCLCK loaded (0 rows)
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SYSCFG
Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SYSCFG created
Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SYSCFG loaded (0 rows)
Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_ATTR
Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_ATTR created
Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_ATTR loaded (0 rows)
Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_FAILED
Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_FAILED created
Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_FAILED loaded (0 rows)
Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_IDX
Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_IDX created
Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_IDX loaded (0 rows)
Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_LINKS
Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_LINKS created
Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_LINKS loaded (0 rows)
Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPCEL
Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPCEL created
Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPCEL loaded (0 rows)
Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPCOT
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPCOT created
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPCOT loaded (0 rows)
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPELE
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPELE created
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPELE loaded (0 rows)
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPMES
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPMES created
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPMES loaded (0 rows)
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPMMP
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPMMP created
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
jload.log>>while import java dump phase :
tail -100f jload.log
12.09.08 12:48:18 com.sap.inst.jload.Jload dbImport
INFO: CAF_UM_RELGR_MEMBS loaded (0 rows)
12.09.08 12:48:18 com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_UM_RELGR_TEXTS
12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
INFO: table CAF_UM_RELGR_TEXTS created
12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
INFO: CAF_UM_RELGR_TEXTS loaded (0 rows)
12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_UM_RELGR_WORDS
12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
INFO: table CAF_UM_RELGR_WORDS created
12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
INFO: CAF_UM_RELGR_WORDS loaded (0 rows)
12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
INFO: trying to create table J2EE_CONFIG
12.09.08 12:48:21 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_CONFIG created
12.09.08 12:48:49 com.sap.inst.jload.Jload dbImport
INFO: J2EE_CONFIG loaded (9195 rows)
12.09.08 12:48:49 com.sap.inst.jload.Jload dbImport
INFO: trying to create table J2EE_CONFIGENTRY
12.09.08 12:48:50 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_CONFIGENTRY created
12.09.08 13:44:02 com.sap.inst.jload.Jload dbImport
INFO: J2EE_CONFIGENTRY loaded (20235 rows)
12.09.08 13:44:02 com.sap.inst.jload.Jload dbImport
INFO: trying to create table J2EE_KEYSEQUENCE
12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_KEYSEQUENCE created
12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
INFO: J2EE_KEYSEQUENCE loaded (1 rows)
12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
INFO: trying to create table SP_PLUG_IN_SAVES
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: table SP_PLUG_IN_SAVES created
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: SP_PLUG_IN_SAVES loaded (0 rows)
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: trying to create table SP_RESULTS
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: table SP_RESULTS created
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: SP_RESULTS loaded (0 rows)
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: trying to create table SP_STORAGE
12.09.08 13:44:05 com.sap.inst.jload.Jload dbImport
INFO: table SP_STORAGE created
12.09.08 13:44:06 com.sap.inst.jload.Jload dbImport
INFO: SP_STORAGE loaded (2 rows)
12.09.08 13:44:06 com.sap.inst.jload.Jload dbImport
INFO: trying to create table TC_WDRR_FGUID
12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
INFO: table TC_WDRR_FGUID created
12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
INFO: TC_WDRR_FGUID loaded (0 rows)
12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
INFO: trying to create table TC_WDRR_LAYERS
12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
INFO: table TC_WDRR_LAYERS created
12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
INFO: TC_WDRR_LAYERS loaded (2 rows)
12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
INFO: trying to create table TC_WDRR_MRO_FILES
12.09.08 13:44:09 com.sap.inst.jload.Jload dbImport
INFO: table TC_WDRR_MRO_FILES created
PLEASE HELP ASAP!!!!!!
Regards,
Sohal....Hi Ashok,
Thanks for prompt response
Yes Oracle is up....it bounced the Db once before performing Post Load activities...step
now, it resumed the installation and currently updating the DB statistics.
please chk the logs below:
tail -200f sapinst.log:
INFO 2008-09-12 14:12:05.250
Execution of the command "/oracle/RGP/102_64/bin/lsnrctl status LISTENER" finished with return code 0. Output:
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 12-SEP-2008 14:12:05
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=RGP.WORLD))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
Start Date 11-SEP-2008 20:28:39
Uptime 0 days 17 hr. 43 min. 25 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/RGP/102_64/network/admin/listener.ora
Listener Log File /oracle/RGP/102_64/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=RGP.WORLD)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=RGP)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=FLGPPSAP01)(PORT=1527)))
Services Summary...
Service "RGP" has 1 instance(s).
Instance "RGP", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
INFO 2008-09-12 14:12:13.667
Execute step createOracleStatisticsSynonyms of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ORA|ind|ind|ind|ind|0|0
INFO 2008-09-12 14:12:14.023
Account orargp already exists.
INFO 2008-09-12 14:12:14.033
Account 0 already exists.
INFO 2008-09-12 14:12:14.049
Account dba already exists.
INFO 2008-09-12 14:12:14.058
Account 104 already exists.
INFO 2008-09-12 14:12:14.078
Account 0 already exists.
INFO 2008-09-12 14:12:14.096
Account 105 already exists.
INFO 2008-09-12 14:12:15.836
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/brconnect.log.
INFO 2008-09-12 14:12:15.972
Output of /usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f crsyn -o SAPSR3 is written to the logfile brconnect.log.
INFO 2008-09-12 14:12:18.817
Execution of the command "/usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f crsyn -o SAPSR3" finished with return code 0. Output:
BR0801I BRCONNECT 7.00 (32)
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.17
BR0833I Creating public synonyms for database log owner SAPSR3...
BR0925I Public synonym SAP_SDBAH created successfully for table SAPSR3.SDBAH
BR0925I Public synonym SAP_SDBAD created successfully for table SAPSR3.SDBAD
BR0925I Public synonym SAP_MLICHECK created successfully for table SAPSR3.MLICHECK
BR0925I Public synonym SAP_SAPLIKEY created successfully for table SAPSR3.SAPLIKEY
BR0925I Public synonym SAP_DBAML created successfully for table SAPSR3.DBAML
BR0925I Public synonym SAP_DBARCL created successfully for table SAPSR3.DBARCL
BR0925I Public synonym SAP_DBAFID created successfully for table SAPSR3.DBAFID
BR0925I Public synonym SAP_DBAEXTL created successfully for table SAPSR3.DBAEXTL
BR0925I Public synonym SAP_DBAREOL created successfully for table SAPSR3.DBAREOL
BR0925I Public synonym SAP_DBABARL created successfully for table SAPSR3.DBABARL
BR0925I Public synonym SAP_DBADFL created successfully for table SAPSR3.DBADFL
BR0925I Public synonym SAP_DBAOPTL created successfully for table SAPSR3.DBAOPTL
BR0925I Public synonym SAP_DBASPAL created successfully for table SAPSR3.DBASPAL
BR0925I Public synonym SAP_DBABD created successfully for table SAPSR3.DBABD
BR0925I Public synonym SAP_DBABL created successfully for table SAPSR3.DBABL
BR0925I Public synonym SAP_DBATL created successfully for table SAPSR3.DBATL
BR0925I Public synonym SAP_DBAOBJL created successfully for table SAPSR3.DBAOBJL
BR0925I Public synonym SAP_DBAPHAL created successfully for table SAPSR3.DBAPHAL
BR0925I Public synonym SAP_DBAGRP created successfully for table SAPSR3.DBAGRP
BR0925I Public synonym SAP_DBAERR created successfully for table SAPSR3.DBAERR
BR0925I Public synonym SAP_DBATRIAL created successfully for table SAPSR3.DBATRIAL
BR0925I Public synonym SAP_SVERS created successfully for table SAPSR3.SVERS
BR0925I Public synonym SAP_TGORA created successfully for table SAPSR3.TGORA
BR0925I Public synonym SAP_IGORA created successfully for table SAPSR3.IGORA
BR0925I Public synonym SAP_TSORA created successfully for table SAPSR3.TSORA
BR0925I Public synonym SAP_TAORA created successfully for table SAPSR3.TAORA
BR0925I Public synonym SAP_IAORA created successfully for table SAPSR3.IAORA
BR0925I Public synonym SAP_DD02L created successfully for table SAPSR3.DD02L
BR0925I Public synonym SAP_DD09L created successfully for table SAPSR3.DD09L
BR0925I Public synonym SAP_DDNTT created successfully for table SAPSR3.DDNTT
BR0925I Public synonym SAP_DBCHK created successfully for table SAPSR3.DBCHK
BR0925I Public synonym SAP_DBDIFF created successfully for table SAPSR3.DBDIFF
BR0925I Public synonym SAP_DBSTATC created successfully for table SAPSR3.DBSTATC
BR0925I Public synonym SAP_DBSTATTORA created successfully for table SAPSR3.DBSTATTORA
BR0925I Public synonym SAP_DBSTATIORA created successfully for table SAPSR3.DBSTATIORA
BR0925I Public synonym SAP_DBSTATHORA created successfully for table SAPSR3.DBSTATHORA
BR0925I Public synonym SAP_DBSTAIHORA created successfully for table SAPSR3.DBSTAIHORA
BR0925I Public synonym SAP_DBCHECKORA created successfully for table SAPSR3.DBCHECKORA
BR0925I Public synonym SAP_DBMSGORA created successfully for table SAPSR3.DBMSGORA
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.18
BR0834I Public synonyms for database log owner SAPSR3 created successfully
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.18
BR0802I BRCONNECT completed successfully
INFO 2008-09-12 14:12:23.841
Execute step setOraclePasswords of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ORA|ind|ind|ind|ind|0|0
INFO 2008-09-12 14:12:25.190
Account orargp already exists.
INFO 2008-09-12 14:12:25.194
Account dba already exists.
INFO 2008-09-12 14:12:25.198
Account orargp already exists.
INFO 2008-09-12 14:12:25.202
Account dba already exists.
INFO 2008-09-12 14:12:25.251
Removing file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp0_1.sql.
INFO 2008-09-12 14:12:25.260
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp0_1.sql.
INFO 2008-09-12 14:12:28.279
Account orargp already exists.
INFO 2008-09-12 14:12:28.290
Account 0 already exists.
INFO 2008-09-12 14:12:28.305
Account dba already exists.
INFO 2008-09-12 14:12:28.315
Account 104 already exists.
INFO 2008-09-12 14:12:28.335
Account 0 already exists.
INFO 2008-09-12 14:12:28.353
Account 105 already exists.
INFO 2008-09-12 14:12:30.123
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/brconnect.log.
INFO 2008-09-12 14:12:30.269
Output of /usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f chpass -o SAPSR3 -p XXXXXX is written to the logfile brconnect.log.
INFO 2008-09-12 14:12:31.006
Execution of the command "/usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f chpass -o SAPSR3 -p XXXXXX" finished with return code 0. Output:
BR0801I BRCONNECT 7.00 (32)
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
BR0828I Changing password for database user SAPSR3
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
BR0829I Password changed successfully in database for user SAPSR3
BR0830I Password inserted successfully into table OPS$RGPADM.SAPUSER for user SAPSR3
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
BR0802I BRCONNECT completed successfully
INFO 2008-09-12 14:12:31.574
Account orargp already exists.
INFO 2008-09-12 14:12:31.578
Account dba already exists.
INFO 2008-09-12 14:12:31.583
Account orargp already exists.
INFO 2008-09-12 14:12:31.587
Account dba already exists.
INFO 2008-09-12 14:12:31.641
Removing file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp1_1.sql.
INFO 2008-09-12 14:12:31.649
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp1_1.sql.
INFO 2008-09-12 14:12:33.918
Account orargp already exists.
INFO 2008-09-12 14:12:33.928
Account 0 already exists.
INFO 2008-09-12 14:12:33.944
Account dba already exists.
INFO 2008-09-12 14:12:33.953
Account 104 already exists.
INFO 2008-09-12 14:12:33.973
Account 0 already exists.
INFO 2008-09-12 14:12:33.991 -
Solaris 10 11/06 Rev. A hangs during installation
Just received my Solaris 10 DVD package in the mail;
during the boot process to go into the installation process, it hangs no matter what you select in GRUB
this is the screen (when selecting to boot 'Solaris') in which it hangs...
SunOS Release 5.10 Version Generic_118855-33 32-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
my hardware;
AMD Athlon 1800+
512 MB of RAM
80 GB HDD
ATI Radeon 9200 AGPMy Computer:
Intel Celeron 2.7GHz
80 GB Hard Drive
512 MB Ram
ATI Radeon 9200 PCI
I'm suspecting that it's the Radeon Graphics card (hope not, using the onboard will cut into system ram, I suspect that is the case for you also?) - but it is listed as working in the HCL last time I checkd.
It displays the copyright message, then the cursor jumps around the screen a bit and it justs there.
What type of computer do you have, and what model (HP, Dell, eMachines, Gateway, etc.)?
I may pull the graphics card out later and turn on the onboard graphics and see what happens then. First I'll try just changing the default display in BIOS and trying to boot the install, though. I'll post back and see if that changes anything.
*Note: Solaris 10 installation DOES boot on my main windows development workstation, which has the same card you have (AGP, instead of PCI like this one, though - but same card) - so I'm skeptical of the cause. Most probably a BIOS/misc. hardware issue. I tried loading the kernel in verbose mode (-v) and there were no errors. -
-- Oracle Unbreakable Linux hangs during installation --
Hi
I am trying to install the new Oracle Unbreakable Linux on a 2 CPU Intel Pentium 4 64 bits server. During the first CD installation it hangs just after you select if you want to install using the graphical mode or the character base mode (it hangs in both modes).The point where it fails is
mounting /tmp as ramfs....... done
running install...
running /sbin/loader
Has anybody experience the same behavior or do you have any suggestions?
This error does not happen when I try to install either SUSE 9 or 10 nor Red Hat 3 or 4,
so I do not think is the hardware.
Any help will be appreciated.Ok. New update. I had rejiggered my desktop hard-drives and the DVD drive and in the process had not set the proper Master / Slave settings on the DVD drive. After I fixed that, it did start installing.
I selected the Server configuration and later selected the "Install everything" option. It failed after about 30 minutes while installing the snmp package. It said that it was a serious error due to media error or no disk space. Both of which seemed improbable because the media test resulted fine and I had 160 GB of Hard disk space !. I had to abandon ( well no choice actually ) and restart. This time I chose the Workstation configuration and just added the scientific packages. This time it installed ok, but, new problem.
I do not see ANY applications at all in the Applications drop down menu. Not even as root.
Hmmm. I would hate to start digging around in gnome. It is a distraction from what I really intend to do. To start developing applications on 10g on Linux ! Damn.
Any advise ? -
Problem during installation of WAS patches
hi,
when i am applying WAS patches,the process staggers for a very long time (nearly a day)at the "deploying online" step.does this take this long?...could someone suggest waht should be done?..
regards,
UmaHi Umberto,
I got similar problem while installation stop at 41% and swapped to second CD (data 1). It hangs at message "Creating CoProcess SAPCAR ....".
After reading some other posted message, I created CD images of WAS 6.20 - second CD (data 1) and third CD (data 2), mounted them as virtual drives on XP Pro. Restart the installation again, when prompt to locate second CD, I selected the virtual drives. After hanging for several minutes at 41%, the installation continue..... prompt to locate third CD.... until 100% installation complete. I know this is weird because I have no problem to install on my notebook by changing CD physically. This problem is only happen on my desktop using intel G31 mobo and E8500 cpu.
Hope you can complete the installation.
Regards,
Donald -
System hang during installation of Solaris 10
Dear all,
Solaris 10 x86 6/06 installation on Magic-Pro MP-P6PE-1000
mainboard.
I have tried on PC and VMware 5.5.1, but fail the installation.
Moreover, I have tried append "-kd" at "kernal ...cdrom" in GRUB edit mode, and then boot the system.
type "use_mp/W 0 :c"
But it still hang at:
SunOS Release 5.10 Version Generic_118855-14 32-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
or
configuring devices
hang!!
I've also try disable/enable ACPI, but no success.
Have any ideas?
Thanks!Try to boot the kernel with the "-v" option, any maybe even set
"moddebug to 80000000", so that we can get a better idea
where it is hanging.
Check the following web page for details:
http://blogs.sun.com/roller/page/dmick?entry=diagnosing_kernel_hangs_panics_with -
Ovi Suite 2.2.1.23 hangs during installation
Hi there - looking through the forums, this looks like a FAQ - there are several proposed solutions and I think I've tried them all but the same thing still happens: the installer hangs with the bar about a third of the way across.
Tried on both XP and Vista (though I've not tried ALL the proposed solutions on Vista). I *think* the bar went all the way across while I was watching on Vista before proceeding again and stopping about a third of the way.
This is a brand new install (bought a N900 today) and my first experience of Nokia. Not massively impressed so far!
I'm a developer - if anyone from Nokia wants to get in touch I'm happy to help with the investigation...
Clues appreciated!Sorry, just a quick cut-and-paste on my way out with logs from yesterday. Binary wasn't running twice.
XP:
MSI (s) (58:74) [00:06:10:234]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\Nokia\Connectivity Cable,,BinaryType=0)
MSI (s) (58:74) [00:06:10:234]: Executing op: RegCreateKey()
MSI (s) (58:74) [00:06:10:250]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\Nokia\ModemOptions,,BinaryType=0)
MSI (s) (58:74) [00:06:10:250]: Executing op: RegCreateKey()
MSI (s) (58:74) [00:06:10:250]: Executing op: ActionStart(Name=CA_USBDriverInstallDrivers_RollBack,Description=Installing [ProductName_Loc],)
MSI (s) (58:74) [00:06:10:250]: Executing op: CustomActionSchedule(Action=CA_USBDriverInstallDrivers_RollBack,ActionType=1378,Source=C:\Program Files\Nokia\Connectivity Cable Driver\,Target="C:\Program Files\Nokia\Connectivity Cable Driver\setupextcmb.exe" uninstall "C:\Program Files\Nokia\Connectivity Cable Driver\",)
MSI (s) (58:74) [00:06:10:250]: Executing op: ActionStart(Name=CA_USBDriverInstallDrivers,Description=Installing [ProductName_Loc],)
MSI (s) (58:74) [00:06:10:250]: Executing op: CustomActionSchedule(Action=CA_USBDriverInstallDrivers,ActionType=1058,Source=C:\Program Files\Nokia\Connectivity Cable Driver\,Target="C:\Program Files\Nokia\Connectivity Cable Driver\setupextcmb.exe" install "C:\Program Files\Nokia\Connectivity Cable Driver\",)
(I don't like the look of the "Rollback"...)
Couldn't find the logs immediately on Vista and need to run - should have time to take another peek this evening... -
Workflow Configuration Assistant : Hangs during Installation
I am trying to install Oracle Workflow Server Release 2.6. The installation of Workflow 2.6.0.1.o takes place successfully BUT when the Configuration Assistant runs (automatically after installation) : it hangs after showing the Configuration Assistant' window for 1-2 seconds. The status as shown in the Universal Installer is 'in progress' and it remains like this for ever.
In the description section, this is what I get :
Workflow Configuration Assistant for Windows NT
8
Parameter "wfdir" = D:\Oracle\Ora81\wf
Parameter "orahome" = D:\Oracle\Ora81
Parameter "wintz" = Central Daylight Time
Parameter "systemroot" = C:\WINNTWorkflowCA: workflow.log exists, renamed existing file to D:\Oracle\Ora81\wf\install\workflow-2002-01-16-18-09-51.log
D:\Oracle\Ora81\wf\install\workflow.log
WorkflowCA:
WorkflowCA: Workflow Configuration in progress...
WorkflowCA: java.lang.NoClassDefFoundError: WfFrame
at WorkflowCA.main(Compiled Code)
*** Please advise ***
Thanks.We recommend that you post your question in the General>Products>Application Server Forum
Regards, OTN Team -
Hang during installation of 11g
When I install my 11g Database in Windows 2003 Server VM, it hang at 30%. The error log is as follow:
INFO: *** Install Page***
INFO: FastCopy : File Version is Compatible
INFO: Install mode is fastcopy mode for component 'oracle.server' with Install type 'EE'.
INFO: Setup phase has been specified as needed
INFO: HomeSetup JRE files in Scratch :0
INFO: Setting variable 'ROOTSH_LOCATION' to 'C:\app\Administrator\product\11.1.0\db_2\root.sh'. Received the value from a code block.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_exp_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'racfiles.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_dirs.lst'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_filemap.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'setperms1.sh'.
INFO: Number of threads for fast copy :1
INFO: FastCopy : The component info is ignored :oracle.ntoledb.odp_net_2:11.1.0.6.0
Can anybody help for this? Thx.Hi;
1. What is your exacet Db version(11gR2 or 11gR1)
2. What is exacet OS and its 32 bit or 64 bit
3. This message doesnt indicate any error message, please check log file for exact error message
Please also see below link and be sure you clarify all prereqs:
http://download.oracle.com/docs/cd/E11882_01/install.112/e16781/toc.htm#BGBEEBAD
Regard
Helios -
Issues during installation of WDJ7 Patch after new Smart Update version
Hi everybody,
today I installed the WebLogic Server 10.3.2 64 bit to use it for Enterprise Manager Grid Control 11g. One of the prerequisites is the WDJ7 patch for the WebLogic Server.
After the update of the Smart Update on July 11 it is not possible to get that patch over the Smart Update gui (Note: 1294294.1). I tried to download the patch with the id 9438213 over My Oracle Support. The descripton (SU Patch [WDJ7]: Mandatory Patch required on WLS 10.3.2 for Oracle Grid Control (GC) 11.1 install) of the download looks fine, but in the zip file the jar WDJ7.jar is missing. The zip files contains only the following files:
*4D53.jar*
NIXN.jar
patch-catalog_15563.xml
patch-catalog.xml
XLXA.jar
README.txt
How can I get the WDJ4 patch? Do I use the wrong patch id?
Best regards
Christian
Edited by: cgohmann on 21.06.2011 15:20If you look at the install documentation of the Grid Control you'll find:
"Ensure that you apply patch ID WDJ7 on Oracle WebLogic Server using the Oracle Smart Update utility. This patch fixes bugs 8990616, 9100465, and 9221722."
After loading the patch into Smart Update you'll see that the 3 entries which appears under tab Manage Patches are in fact fixing those three bugs. -
Sun ONE 4 hangs during installation....any ideas??
Hi,
i have installed JDK 1.4 on Windows Me OS. I did shut down and restart the computer. Now I am trying to install Sun ONE Studio 4 update 1, Community Edition. The installation process begins but then freezes at the point where the dialog box says:
"Searching for suitable Java SDK. Please Wait..."
I let it run all night only to wake up to the same thing on the screen 6 hours later!
Any ideas on the cause/solution?
Thanks.Where exactly did you install the JDK ?
THe path to the JDK must not contain any blank spaces (so for examle C:\Program Files\... is not a suitable location) otherwise you may have trouble getting it to work. -
Adding Tiger to a separate HD on a Sawtooth G4 - Hangs during installation
Hi everyone... I recently purchased a Sawtooth G4/400 MHz from a local auction for $45. It came with a 6X DVD drive (yuck), 2 10 GB hard drives, 128 MB ram, and OS 9 preinstalled, but no disks or other peripherals.
Last week the HD in my iBook died, and, as I am otherwise in a predominantly windows environment at home and work, I am going through Mac withdrawal . So, I thought I would start messing with that old PowerMac until I have the money to buy a laptop hard drive.
Basically, I'm used to OS X (OS 9 leaves quite a bit to be desired) and would like to install it on this computer. I knew 10 GB was going to be a little small for OS X, so since I had a 80 GB HD laying around, I replaced the slave drive in the powermac with that and formatted it in OS 9. I then put my retail OS X Panther disk in the drive, rebooted the Mac while holding down the "C" key, and booted from the disk.
I saw the familiar Apple logo, went through the agreement stuff, and then the screen popped up to select the drive. The spinny-thing in the right hand corner indicated the computer was looking for drives, and then...
...it stopped. Nothing happened. I left it on overnight in case it needed lots of time... still nothing.
Does anyone have any suggestions? Do I need more memory? Does this computer even support OS X?
Thanks in advance for your help!You're Welcome!
Tiger will run fine. A little slow, because of the processor speed, but you should be fine. Other iLife app's, and graphics will be a bit slow, and you don't have enough processor for burning in iDVD, but Tiger will work fine.
System Requirements
iLife System Requirements
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan -
Re: 11gr2 client installation hangs during client installation
Hi I have been having issues with istalling Oracle 11 g client in windows 7. It hangs during installation. Please find the installation log.
really appreciate the help .
Thanks
NFO: InstallLocationAction to INVENTORY_YES
INFO: Verifying route INVENTORY_YES
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is [email protected]5
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\Oracle_zip_file\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Preparation of nodes for running verifications failed. Reason:
- Cause Of Problem Not Available
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:A
WARNING: Result values are not available for this verification task
INFO: *********************************************
INFO: Free Space: APPIKATA1:C:\Users\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:APPIKATA1
WARNING: Result values are not available for this verification task
INFO: Error Message:PRVF-4001 : Check: Space available on "C:\Users\AppData\Local\Temp"
INFO: Cause: Could not determine mount point for location specified.
INFO: Action: Ensure location specified is available.
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:A
WARNING: Result values are not available for this verification task
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:APPIKATA1
WARNING: Result values are not available for this verification task
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]
Edited by: user2493512 on Sep 20, 2012 11:30 PMPl post exact versions of "11g" and "Windows 7" - Home versions are not supported - you will need Professional or higher.
Looks like the "-ignoreSysprereqs" flag was used for the install - is there a reason for this ?
HTH
Srini -
Crash during installation of MediaSou
The mediaSource hangs during installation. My computer runs on Windows XP SP platform with the latest updates from Microsoft. The motherboard is Asus P4S8X. I have a Asus 6 X DVD, a Plextor 402 CDRW, and a Asus 604 DVDRW. I have installed Nero and softwares like Clone DVD2 etc.
The problem is:
During installation, the installer hangs when the progress indicator showed 3%. After stopping the installation, a windows pops up indicating problems with RPC. At this time, the icon of Creative MediaSource is present on the desktop. However, the software does not show up in the Add/Remove Program List (in control panel). In this way, I cannot remove the software cleanly. Is this a hardware or software problem?
Please help me to solve this problem.
Ian addition, are there any other softwares for conversion of music format?chiu,
What is the exact RPC error messages? See if these article helps and fits the bill.
http://consumer.installshield.com/kb.asp?id=Q0888
Jason
Maybe you are looking for
-
Determing which component from a custom TreeCellRenderer was clicked on
hi, i've been experimenting with finding which component has been clicked on in a JTree which has a custom tree cell renderer. I've got a piece of code that appears to work, but am unsure if this is the proper way to go about doing this, and whether
-
[Solved] ar9170usb loaded but WIFI not working
Hi, I bought today my new USB WIFI adapter (TP-Link TL-WN822N), but its not working. ar9170usb module is loaded correctly, but wlan0 doesnt. dmesg| grep ar9170usb [ 3.007214] usbcore: registered new interface driver ar9170usb lsmod | grep ar9170usb a
-
Best way to create a Template, and create "replace" where imported items ..
I would look to create a Template where I have photos that will be dropped into precreated "replace" areas and once imported, they will automatically be resized at a predetermined size I have chosen. I also want to preset all alignemnts: align top, d
-
Image dissapears when cropping
When using the crop tool, and I expand the cropped area outside the original image, the image dissapears and the area turns white. How do I turn what ever "feature" this is off?
-
Are any iphone 5 fm radio docking stations that let you leave the protective case on phone
Are any I phone 5 fm radio docking stations available that I can leave my protective case on phone while charging