Tp unlocksys during upgrade returns code 0232
Hi all,
I'm upgrading a system from 4.5B to ECC 6.0. I need to unlock the system in order to log in with a user different from DDIC.
SAPup is now in phase PARCONV_UPG (387/505). The shadow instance is not available any more, so SAPup is working only in the real instance.
When I try to execute
tp unlocksys TEC pf=/usr/sap/trans/bin/TP_DOMAIN_TEC.PFL
an error occurs ( see below )
I have also tried with
tp unlocksys TEC pf=<dir_trans>//DEFAULT.TPP
with the same results. Any ideas?
Thank you very much in advance.
Best Regards
TRACE-INFO: 16: *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("libdb2.a(shr_64.o)") FAILED 1935 0.006630
TRACE-INFO: 17: " 0509-022 Cannot load module shr_64.o.
TRACE-INFO: 18: 0509-026 System error: A file or directory in the path name does not exist." (errno=2,No such file or directory)
TRACE-INFO: 19: Could not load DB2 library libdb2.a(shr_64.o). No database connection possible.
TRACE-INFO: 20: 77 0.006707
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0232
tp finished with return code: 232
Edited by: Francisco José Martínez Carretero on Aug 31, 2010 3:50 PM
HI...
we are upgrading SCM 7.02 System SP0 to SP7 using SUM on AIX [ SUM 1.0 SP7 P2]
We were in phase just to start Downtime Phase.
We completed backup and immediately Business Users requested to post pone the Downtime Phase to evening .
& When users were trying to login they are getting message
"Upgrade still running : Logon Not possible"
We unlocked it as below
host.domain.com:sidadm> pwd
/<SUM>/abap/var
host.domain.com:sidadm> tp unlocksys <SID> pf=/<SUM>/abap/var/DEFAULT.TPP
This is tp version 380.03.82 (release 720, unicode enabled)
Warning: unknown parameter DYNAMIC_PARAMETERS in parameter file (line 18).
Warning: unknown parameter DYNAMIC_PARAMETERS in parameter file (line 18).
Warning: Parameter DBCONFPATH is no longer used.
tp finished with return code: 0
meaning:
Everything OK
host.domain.com:sidadm>
*** Finally is is just rewrite of same but specifying that when using SUM where DEFAULT.TPP is existing on AIX ***
Similar Messages
-
Return code 0232 while releasing request .
hi frnds ,
While relising request , i m getting return code 0232 .
Please tell me what to do ?
waiting for reply .
Mahesh .Hello Mahesh
Return codes >= 200 usually mean that there is a problem with starting the <b>tp </b>at the operating system level. The tp program is responsible for executing the transports.
Ask your basis people to check if the TMS is properly installed and tp works.
Regards
Uwe -
Test call of transport control program (tp) ended with return code 0232
Hi Gurus,
while releasing a request am facing this fallowing error :
Calling the transport control program tp
"tp EXPCHK SIDK901840 pf=
HOSTNAME\sapmnt\trans\bin\TP_DOMAIN_SID.PFL -Dtransdir=\"
which checks the export requirements, returned the following information:
Return code from tp: 0232
Error text from tp: ERROR: Connect to TI6 failed (20110131145153, prob..
and i have checked the all requirements transport..all are fulfilled..
Can any body tell me the solution.
Regards,
Kittu.Hi Juan,
Thanks for your reply. I cant see tp import log because Request itself is not yet released and in tp system log it says that
ERROR: Connect to SID failed (20110131102838, probably wrong environment).and the value of DIR_TRANS is
HOSTNAME\sapmnt\trans.
Please suggest me what to do to solve this issue.
Regards,
Kittu. -
TP_CANNOT_CONNECT_SYSTEM WITH CODE 0232
Hi,
I am at the middle of prepare phase, now i am updating support package manager which at version 18. Faced error at check_requirement phase with return code 0232. when i see the log, it was talking about provider SQLNCI could not be initialized.
waiting for the response.......This was messy. Here was the end result
.............. FIX
TP TOOL CHECK ERROR : instead of erp, it takes dbo from local parameters
MCOD or Non-MCOD system ????
If MCOD , then Schema = "erp" else it should be "dbo"
sp_check_sap_login : erp, dbo, SAPERPDB .....
WTS : MSSQL_SCHEMA -> pointed to erp ( it was pointing to ERP)
Added system variable MSSQL_SCHEMA = erp
R/3 : STMS - added parameter MSSQL_SCHEMA = erp
Restarted R/3 ...
R/3 :
STMS - Check TP Tool : No errors reported now
SICK - No errors reported
SPAM - Updated successfully
..................... FIX END
Notes for fixing
The notes that eventually led me to this were:
First at all, please check if your current database version is
supported by SAP; you can inquire this by reading SAP Note 62988.
I also ask you to carefully read and check point per point the
following SAP notes, that are the basis for all the configuration
of an MS SQL Server 2005 for its use with SAP:
98678 - SQL Server Connection Issues
128126 - Database Connect for external tools
592514 - MSSQL: internal database users, permissions and security
799058 - Setting Up Microsoft SQL Server 2005
879941 - Configuration Parameters for SQL Server 2005
SAP Note 508140 - Customer messages - Customer logon data
SAP Note 610640 - sp_check_sap_login -
Command return code of 255 (65280) during Grid Infrastructure Installation
I am trying to create a 2-node RAC 11gR2. I am using OEL 5 Update 4. I am using NFS as shared storage. The time on both node is same. Both nodes have 4GB RAM each. Following is my IP settings from /etc/hosts on both nodes:
[oracle@vis ~]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
# Public
10.8.5.191 vis.awc.com vis
10.8.5.192 vsstest.awc.com vsstest
#Private
192.168.0.101 vis-priv.awc.com vis-priv
192.168.0.102 vsstest-priv.awc.com vsstest-priv
#Virtual
10.8.5.166 vis-vip.awc.com vis-vip
10.8.5.170 vsstest-vip.awc.com vsstest-vip
# SCAN
10.8.5.182 rac-scan.awc.com rac-scan
#NAS
192.168.0.101 nas1.awc.com nas1
I am getting error during the Grid Infrastructure installation, when I run the root.sh script through root. Following is the logfile showing the error (/u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_vis.log):
2010-02-02 11:58:05: The configuration parameter file /u01/app/11.2.0/grid/crs/install/crsconfig_params is valid
2010-02-02 11:58:05: Checking for super user privileges
2010-02-02 11:58:05: User has super user privileges
2010-02-02 11:58:05: ### Printing the configuration values from files:
2010-02-02 11:58:05: /u01/app/11.2.0/grid/crs/install/crsconfig_params
2010-02-02 11:58:05: /u01/app/11.2.0/grid/crs/install/s_crsconfig_defs
2010-02-02 11:58:05: ASM_DISCOVERY_STRING=
2010-02-02 11:58:05: ASM_DISKS=
2010-02-02 11:58:05: ASM_DISK_GROUP=
2010-02-02 11:58:05: ASM_REDUNDANCY=
2010-02-02 11:58:05: ASM_SPFILE=
2010-02-02 11:58:05: ASM_UPGRADE=false
2010-02-02 11:58:05: CLSCFG_MISSCOUNT=
2010-02-02 11:58:05: CLUSTER_GUID=
2010-02-02 11:58:05: CLUSTER_NAME=rac-scan
2010-02-02 11:58:05: CRS_NODEVIPS='vis-vip/255.248.0.0/eth0,vsstest-vip/255.248.0.0/eth0'
2010-02-02 11:58:05: CRS_STORAGE_OPTION=2
2010-02-02 11:58:05: CSS_LEASEDURATION=400
2010-02-02 11:58:05: DIRPREFIX=
2010-02-02 11:58:05: DISABLE_OPROCD=0
2010-02-02 11:58:05: EMBASEJAR_NAME=oemlt.jar
2010-02-02 11:58:05: EWTJAR_NAME=ewt3.jar
2010-02-02 11:58:05: EXTERNAL_ORACLE_BIN=/opt/oracle/bin
2010-02-02 11:58:05: GNS_ADDR_LIST=
2010-02-02 11:58:05: GNS_ALLOW_NET_LIST=
2010-02-02 11:58:05: GNS_CONF=false
2010-02-02 11:58:05: GNS_DENY_ITF_LIST=
2010-02-02 11:58:05: GNS_DENY_NET_LIST=
2010-02-02 11:58:05: GNS_DOMAIN_LIST=
2010-02-02 11:58:05: GPNPCONFIGDIR=/u01/app/11.2.0/grid
2010-02-02 11:58:05: GPNPGCONFIGDIR=/u01/app/11.2.0/grid
2010-02-02 11:58:05: GPNP_PA=
2010-02-02 11:58:05: HELPJAR_NAME=help4.jar
2010-02-02 11:58:05: HOST_NAME_LIST=vis,vsstest
2010-02-02 11:58:05: ID=/etc/init.d
2010-02-02 11:58:05: INIT=/sbin/init
2010-02-02 11:58:05: IT=/etc/inittab
2010-02-02 11:58:05: JEWTJAR_NAME=jewt4.jar
2010-02-02 11:58:05: JLIBDIR=/u01/app/11.2.0/grid/jlib
2010-02-02 11:58:05: JREDIR=/u01/app/11.2.0/grid/jdk/jre/
2010-02-02 11:58:06: LANGUAGE_ID=AMERICAN_AMERICA.AL32UTF8
2010-02-02 11:58:06: MSGFILE=/var/adm/messages
2010-02-02 11:58:06: NETCFGJAR_NAME=netcfg.jar
2010-02-02 11:58:06: NETWORKS="eth0"/10.8.0.0:public,"eth1"/192.168.0.0:cluster_interconnect
2010-02-02 11:58:06: NEW_HOST_NAME_LIST=
2010-02-02 11:58:06: NEW_NODEVIPS='vis-vip/255.248.0.0/eth0,vsstest-vip/255.248.0.0/eth0'
2010-02-02 11:58:06: NEW_NODE_NAME_LIST=
2010-02-02 11:58:06: NEW_PRIVATE_NAME_LIST=
2010-02-02 11:58:06: NODELIST=vis,vsstest
2010-02-02 11:58:06: NODE_NAME_LIST=vis,vsstest
2010-02-02 11:58:06: OCFS_CONFIG=
2010-02-02 11:58:06: OCRCONFIG=/etc/oracle/ocr.loc
2010-02-02 11:58:06: OCRCONFIGDIR=/etc/oracle
2010-02-02 11:58:06: OCRID=
2010-02-02 11:58:06: OCRLOC=ocr.loc
2010-02-02 11:58:06: OCR_LOCATIONS=/u01/shared_config/ocr_configuration
2010-02-02 11:58:06: OLASTGASPDIR=/etc/oracle/lastgasp
2010-02-02 11:58:06: OLRCONFIG=/etc/oracle/olr.loc
2010-02-02 11:58:06: OLRCONFIGDIR=/etc/oracle
2010-02-02 11:58:06: OLRLOC=olr.loc
2010-02-02 11:58:06: OPROCDCHECKDIR=/etc/oracle/oprocd/check
2010-02-02 11:58:06: OPROCDDIR=/etc/oracle/oprocd
2010-02-02 11:58:06: OPROCDFATALDIR=/etc/oracle/oprocd/fatal
2010-02-02 11:58:06: OPROCDSTOPDIR=/etc/oracle/oprocd/stop
2010-02-02 11:58:06: ORACLE_BASE=/u01/app/oracle
2010-02-02 11:58:06: ORACLE_HOME=/u01/app/11.2.0/grid
2010-02-02 11:58:06: ORACLE_OWNER=oracle
2010-02-02 11:58:06: ORA_ASM_GROUP=dba
2010-02-02 11:58:06: ORA_DBA_GROUP=oinstall
2010-02-02 11:58:06: PRIVATE_NAME_LIST=
2010-02-02 11:58:06: RCALLDIR=/etc/rc.d/rc0.d /etc/rc.d/rc1.d /etc/rc.d/rc2.d /etc/rc.d/rc3.d /etc/rc.d/rc4.d /etc/rc.d/rc5.d /etc/rc.d/rc6.d
2010-02-02 11:58:06: RCKDIR=/etc/rc.d/rc0.d /etc/rc.d/rc1.d /etc/rc.d/rc2.d /etc/rc.d/rc4.d /etc/rc.d/rc6.d
2010-02-02 11:58:06: RCSDIR=/etc/rc.d/rc3.d /etc/rc.d/rc5.d
2010-02-02 11:58:06: RC_KILL=K19
2010-02-02 11:58:06: RC_KILL_OLD=K96
2010-02-02 11:58:06: RC_START=S96
2010-02-02 11:58:06: SCAN_NAME=rac-scan.awc.com
2010-02-02 11:58:06: SCAN_PORT=1521
2010-02-02 11:58:06: SCRBASE=/etc/oracle/scls_scr
2010-02-02 11:58:06: SHAREJAR_NAME=share.jar
2010-02-02 11:58:06: SILENT=false
2010-02-02 11:58:06: SO_EXT=so
2010-02-02 11:58:06: SRVCFGLOC=srvConfig.loc
2010-02-02 11:58:06: SRVCONFIG=/var/opt/oracle/srvConfig.loc
2010-02-02 11:58:06: SRVCONFIGDIR=/var/opt/oracle
2010-02-02 11:58:06: VNDR_CLUSTER=false
2010-02-02 11:58:06: VOTING_DISKS=/u01/shared_config/voting_disk
2010-02-02 11:58:06: ### Printing other configuration values ###
2010-02-02 11:58:06: CLSCFG_EXTRA_PARMS=
2010-02-02 11:58:06: CRSDelete=0
2010-02-02 11:58:06: CRSPatch=0
2010-02-02 11:58:06: DEBUG=
2010-02-02 11:58:06: DOWNGRADE=
2010-02-02 11:58:06: HAS_GROUP=oinstall
2010-02-02 11:58:06: HAS_USER=root
2010-02-02 11:58:06: HOST=vis
2010-02-02 11:58:07: IS_SIHA=0
2010-02-02 11:58:07: OLR_DIRECTORY=/u01/app/11.2.0/grid/cdata
2010-02-02 11:58:07: OLR_LOCATION=/u01/app/11.2.0/grid/cdata/vis.olr
2010-02-02 11:58:07: ORA_CRS_HOME=/u01/app/11.2.0/grid
2010-02-02 11:58:07: SUPERUSER=root
2010-02-02 11:58:07: UPGRADE=
2010-02-02 11:58:07: VF_DISCOVERY_STRING=/u01/shared_config/voting_disk
2010-02-02 11:58:07: addfile=/u01/app/11.2.0/grid/crs/install/crsconfig_addparams
2010-02-02 11:58:07: crscfg_trace=1
2010-02-02 11:58:07: crscfg_trace_file=/u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_vis.log
2010-02-02 11:58:07: hosts=
2010-02-02 11:58:07: oldcrshome=
2010-02-02 11:58:07: oldcrsver=
2010-02-02 11:58:07: osdfile=/u01/app/11.2.0/grid/crs/install/s_crsconfig_defs
2010-02-02 11:58:07: parameters_valid=1
2010-02-02 11:58:07: paramfile=/u01/app/11.2.0/grid/crs/install/crsconfig_params
2010-02-02 11:58:07: platform_family=unix
2010-02-02 11:58:07: srvctl_trc_suff=0
2010-02-02 11:58:07: unlock_crshome=
2010-02-02 11:58:07: user_is_superuser=1
2010-02-02 11:58:07: ### Printing of configuration values complete ###
2010-02-02 11:58:07: Oracle CRS stack is not configured yet
2010-02-02 11:58:07: CRS is not yet configured. Hence, will proceed to configure CRS
2010-02-02 11:58:07: Cluster-wide one-time actions... Done!
2010-02-02 11:58:17: set owner/group of OCR path
2010-02-02 11:58:17: Oracle CRS home = /u01/app/11.2.0/grid
2010-02-02 11:58:17: Host name = vis
2010-02-02 11:58:17: CRS user = oracle
2010-02-02 11:58:17: Oracle CRS home = /u01/app/11.2.0/grid
2010-02-02 11:58:17: GPnP host = vis
2010-02-02 11:58:17: Oracle GPnP home = /u01/app/11.2.0/grid/gpnp
2010-02-02 11:58:17: Oracle GPnP local home = /u01/app/11.2.0/grid/gpnp/vis
2010-02-02 11:58:17: GPnP directories verified.
2010-02-02 11:58:17: Checking to see if Oracle CRS stack is already configured
2010-02-02 11:58:17: Oracle CRS stack is not configured yet
2010-02-02 11:58:17: ---Checking local gpnp setup...
2010-02-02 11:58:18: The setup file "/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" does not exist
2010-02-02 11:58:18: The setup file "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer/cwallet.sso" does not exist
2010-02-02 11:58:18: The setup file "/u01/app/11.2.0/grid/gpnp/vis/wallets/prdr/cwallet.sso" does not exist
2010-02-02 11:58:18: chk gpnphome /u01/app/11.2.0/grid/gpnp/vis: profile_ok 0 wallet_ok 0 r/o_wallet_ok 0
2010-02-02 11:58:18: chk gpnphome /u01/app/11.2.0/grid/gpnp/vis: INVALID (bad profile/wallet)
2010-02-02 11:58:18: ---Checking cluster-wide gpnp setup...
2010-02-02 11:58:18: The setup file "/u01/app/11.2.0/grid/gpnp/profiles/peer/profile.xml" does not exist
2010-02-02 11:58:18: The setup file "/u01/app/11.2.0/grid/gpnp/wallets/peer/cwallet.sso" does not exist
2010-02-02 11:58:18: The setup file "/u01/app/11.2.0/grid/gpnp/wallets/prdr/cwallet.sso" does not exist
2010-02-02 11:58:18: chk gpnphome /u01/app/11.2.0/grid/gpnp: profile_ok 0 wallet_ok 0 r/o_wallet_ok 0
2010-02-02 11:58:18: chk gpnphome /u01/app/11.2.0/grid/gpnp: INVALID (bad profile/wallet)
2010-02-02 11:58:18: gpnp setup checked: local valid? 0 cluster-wide valid? 0
2010-02-02 11:58:18: gpnp setup: NONE
2010-02-02 11:58:18: GPNP configuration required
2010-02-02 11:58:18: Validating for SI-CSS configuration
2010-02-02 11:58:18: Retrieving OCR main disk location
2010-02-02 11:58:18: Opening file OCRCONFIG
2010-02-02 11:58:18: Value () is set for key=ocrconfig_loc
2010-02-02 11:58:18: Unable to retrieve ocr disk info
2010-02-02 11:58:18: Checking to see if any 9i GSD is up
2010-02-02 11:58:18: libskgxnBase_lib = /etc/ORCLcluster/oracm/lib/libskgxn2.so
2010-02-02 11:58:18: libskgxn_lib = /opt/ORCLcluster/lib/libskgxn2.so
2010-02-02 11:58:18: SKGXN library file does not exists
2010-02-02 11:58:18: OLR location = /u01/app/11.2.0/grid/cdata/vis.olr
2010-02-02 11:58:18: Oracle CRS Home = /u01/app/11.2.0/grid
2010-02-02 11:58:18: Validating /etc/oracle/olr.loc file for OLR location /u01/app/11.2.0/grid/cdata/vis.olr
2010-02-02 11:58:18: /etc/oracle/olr.loc already exists. Backing up /etc/oracle/olr.loc to /etc/oracle/olr.loc.orig
2010-02-02 11:58:18: Oracle CRS home = /u01/app/11.2.0/grid
2010-02-02 11:58:18: Oracle cluster name = rac-scan
2010-02-02 11:58:18: OCR locations = /u01/shared_config/ocr_configuration
2010-02-02 11:58:18: Validating OCR
2010-02-02 11:58:18: Retrieving OCR location used by previous installations
2010-02-02 11:58:18: Opening file OCRCONFIG
2010-02-02 11:58:18: Value () is set for key=ocrconfig_loc
2010-02-02 11:58:18: Opening file OCRCONFIG
2010-02-02 11:58:18: Value () is set for key=ocrmirrorconfig_loc
2010-02-02 11:58:18: Opening file OCRCONFIG
2010-02-02 11:58:18: Value () is set for key=ocrconfig_loc3
2010-02-02 11:58:18: Opening file OCRCONFIG
2010-02-02 11:58:18: Value () is set for key=ocrconfig_loc4
2010-02-02 11:58:18: Opening file OCRCONFIG
2010-02-02 11:58:18: Value () is set for key=ocrconfig_loc5
2010-02-02 11:58:18: Checking if OCR sync file exists
2010-02-02 11:58:18: No need to sync OCR file
2010-02-02 11:58:18: OCR_LOCATION=/u01/shared_config/ocr_configuration
2010-02-02 11:58:18: OCR_MIRROR_LOCATION=
2010-02-02 11:58:18: OCR_MIRROR_LOC3=
2010-02-02 11:58:18: OCR_MIRROR_LOC4=
2010-02-02 11:58:19: OCR_MIRROR_LOC5=
2010-02-02 11:58:19: Current OCR location=
2010-02-02 11:58:19: Current OCR mirror location=
2010-02-02 11:58:19: Current OCR mirror loc3=
2010-02-02 11:58:19: Current OCR mirror loc4=
2010-02-02 11:58:19: Current OCR mirror loc5=
2010-02-02 11:58:19: Verifying current OCR settings with user entered values
2010-02-02 11:58:19: Setting OCR locations in /etc/oracle/ocr.loc
2010-02-02 11:58:19: Validating OCR locations in /etc/oracle/ocr.loc
2010-02-02 11:58:19: Checking for existence of /etc/oracle/ocr.loc
2010-02-02 11:58:19: Backing up /etc/oracle/ocr.loc to /etc/oracle/ocr.loc.orig
2010-02-02 11:58:19: Setting ocr location /u01/shared_config/ocr_configuration
2010-02-02 11:58:19: Creating or upgrading Oracle Local Registry (OLR)
2010-02-02 11:58:20: OLR successfully created or upgraded
2010-02-02 11:58:20: /u01/app/11.2.0/grid/bin/clscfg -localadd
2010-02-02 11:58:21: Keys created in the OLR successfully
2010-02-02 11:58:21: GPnP setup state: none
2010-02-02 11:58:21: Creating local GPnP setup for clustered node...
2010-02-02 11:58:21: Oracle CRS home = /u01/app/11.2.0/grid
2010-02-02 11:58:21: Oracle GPnP wallets home = /u01/app/11.2.0/grid/gpnp/vis/wallets
2010-02-02 11:58:21: Checking if GPnP setup exists
2010-02-02 11:58:21: /u01/app/11.2.0/grid/gpnp/vis/wallets/peer/cwallet.sso wallet must be created
2010-02-02 11:58:21: Removing old wallets/certificates, if any
2010-02-02 11:58:21: Creating GPnP Root Wallet...
2010-02-02 11:58:21: /u01/app/11.2.0/grid/bin/orapki wallet create -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/root" -pwd gpnp_wallet1 -nologo
2010-02-02 11:58:22: Creating GPnP Root Certificate...
2010-02-02 11:58:22: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/root" -pwd gpnp_wallet1 -self_signed -dn "CN=GPnP_root" -keysize 1024 -validity 9999 -nologo
2010-02-02 11:58:24: Exporting GPnP Root Certificate...
2010-02-02 11:58:24: /u01/app/11.2.0/grid/bin/orapki wallet export -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/root" -pwd gpnp_wallet1 -dn "CN=GPnP_root" -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/root/b64certificate.txt" -nologo
2010-02-02 11:58:25: Creating GPnP Peer Wallet...
2010-02-02 11:58:25: /u01/app/11.2.0/grid/bin/orapki wallet create -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -pwd gpnp_wallet1 -auto_login -nologo
2010-02-02 11:58:25: Creating GPnP Profile Reader Wallet...
2010-02-02 11:58:25: /u01/app/11.2.0/grid/bin/orapki wallet create -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/prdr" -pwd gpnp_wallet1 -auto_login -nologo
2010-02-02 11:58:26: Creating GPnP PA Wallet...
2010-02-02 11:58:26: /u01/app/11.2.0/grid/bin/orapki wallet create -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa" -pwd gpnp_wallet1 -auto_login -nologo
2010-02-02 11:58:27: Adding private key to GPnP Peer Wallet...
2010-02-02 11:58:27: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -pwd gpnp_wallet1 -dn "CN=GPnP_peer" -keysize 1024 -nologo
2010-02-02 11:58:28: Adding private key to GPnP PA Wallet...
2010-02-02 11:58:28: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa" -pwd gpnp_wallet1 -dn "CN=GPnP_pa" -keysize 1024 -nologo
2010-02-02 11:58:29: Creating certificate request for GPnP Peer Wallet...
2010-02-02 11:58:29: /u01/app/11.2.0/grid/bin/orapki wallet export -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -pwd gpnp_wallet1 -dn "CN=GPnP_peer" -request "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer/certreq.txt" -nologo
2010-02-02 11:58:30: Creating certificate request for GPnP PA Wallet...
2010-02-02 11:58:30: /u01/app/11.2.0/grid/bin/orapki wallet export -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa" -pwd gpnp_wallet1 -dn "CN=GPnP_pa" -request "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa/certreq.txt" -nologo
2010-02-02 11:58:31: Creating certificate for GPnP Peer Wallet...
2010-02-02 11:58:31: /u01/app/11.2.0/grid/bin/orapki cert create -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/root" -pwd gpnp_wallet1 -request "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer/certreq.txt" -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer/cert.txt" -validity 9999 -nologo
2010-02-02 11:58:32: Creating certificate for GPnP PA Wallet...
2010-02-02 11:58:32: /u01/app/11.2.0/grid/bin/orapki cert create -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/root" -pwd gpnp_wallet1 -request "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa/certreq.txt" -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa/cert.txt" -validity 9999 -nologo
2010-02-02 11:58:33: Adding Root Certificate TP to GPnP Peer Wallet...
2010-02-02 11:58:33: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -pwd gpnp_wallet1 -trusted_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/root/b64certificate.txt" -nologo
2010-02-02 11:58:34: Adding Root Certificate TP to GPnP Profile Reader Wallet...
2010-02-02 11:58:34: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/prdr" -pwd gpnp_wallet1 -trusted_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/root/b64certificate.txt" -nologo
2010-02-02 11:58:34: Adding Root Certificate TP to GPnP PA Wallet...
2010-02-02 11:58:34: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa" -pwd gpnp_wallet1 -trusted_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/root/b64certificate.txt" -nologo
2010-02-02 11:58:35: Adding PA Certificate as a TP into a GPnP Peer Wallet...
2010-02-02 11:58:35: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -pwd gpnp_wallet1 -trusted_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa/cert.txt" -nologo
2010-02-02 11:58:36: Adding peer Certificate as a TP into a GPnP PA Wallet...
2010-02-02 11:58:36: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa" -pwd gpnp_wallet1 -trusted_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer/cert.txt" -nologo
2010-02-02 11:58:37: Adding PA Certificate as a TP into a GPnP Profile Reader Wallet...
2010-02-02 11:58:37: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/prdr" -pwd gpnp_wallet1 -trusted_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa/cert.txt" -nologo
2010-02-02 11:58:38: Adding peer Certificate as a TP into a GPnP Profile Reader Wallet...
2010-02-02 11:58:38: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/prdr" -pwd gpnp_wallet1 -trusted_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer/cert.txt" -nologo
2010-02-02 11:58:39: Adding PA Certificate as a TP into a GPnP Peer Wallet...
2010-02-02 11:58:39: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -pwd gpnp_wallet1 -user_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer/cert.txt" -nologo
2010-02-02 11:58:40: Adding peer Certificate as a TP into a GPnP PA Wallet...
2010-02-02 11:58:40: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa" -pwd gpnp_wallet1 -user_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa/cert.txt" -nologo
2010-02-02 11:58:41: GPnP Wallets ownership/permissions successfully set.
2010-02-02 11:58:41: GPnP Wallets successfully created.
2010-02-02 11:58:41: <--- GPnP wallets successfully created
2010-02-02 11:58:41: Creating GPnP peer profile --->
2010-02-02 11:58:41: Oracle CRS home = /u01/app/11.2.0/grid
2010-02-02 11:58:41: Oracle GPnP profiles home = /u01/app/11.2.0/grid/gpnp/vis/profiles
2010-02-02 11:58:41: Oracle GPnP profiles parameters:
2010-02-02 11:58:41: paloc==
2010-02-02 11:58:41: cname=rac-scan=
2010-02-02 11:58:41: cssdisco=/u01/shared_config/voting_disk=
2010-02-02 11:58:41: cssld=400=
2010-02-02 11:58:41: asmdisco==
2010-02-02 11:58:41: asmspf==
2010-02-02 11:58:41: netlst="eth0"/10.8.0.0:public,"eth1"/192.168.0.0:cluster_interconnect=
2010-02-02 11:58:41: ocrid==
2010-02-02 11:58:41: clusterguid==
2010-02-02 11:58:41: Checking if GPnP setup exists
2010-02-02 11:58:41: /u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml profile must be created
2010-02-02 11:58:41: OCRID is not available, hence not set in GPnP Profile
2010-02-02 11:58:42: ClusterGUID is not available, hence not set in GPnP Profile
2010-02-02 11:58:42: gpnptool: run /u01/app/11.2.0/grid/bin/gpnptool create -o="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -ovr -prf -prf_sq=1 -prf_cn=rac-scan -prf_pa="" -hnet=gen -gen:hnet_nm="*" -gen:net=net1 -net1:net_ip="10.8.0.0" -net1:net_ada="eth0" -net1:net_use="public" -gen:net=net2 -net2:net_ip="192.168.0.0" -net2:net_ada="eth1" -net2:net_use="cluster_interconnect" -css=css -css:css_dis="/u01/shared_config/voting_disk" -css:css_ld=400 -asm=asm -asm:asm_dis="++no-value-at-profile-creation--never-updated-through-ASM++" -asm:asm_spf=""
2010-02-02 11:58:42: Running as user oracle: /u01/app/11.2.0/grid/bin/gpnptool create -o="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -ovr -prf -prf_sq=1 -prf_cn=rac-scan -prf_pa="" -hnet=gen -gen:hnet_nm="*" -gen:net=net1 -net1:net_ip="10.8.0.0" -net1:net_ada="eth0" -net1:net_use="public" -gen:net=net2 -net2:net_ip="192.168.0.0" -net2:net_ada="eth1" -net2:net_use="cluster_interconnect" -css=css -css:css_dis="/u01/shared_config/voting_disk" -css:css_ld=400 -asm=asm -asm:asm_dis="++no-value-at-profile-creation--never-updated-through-ASM++" -asm:asm_spf=""
2010-02-02 11:58:42: s_run_as_user2: Running /bin/su oracle -c ' /u01/app/11.2.0/grid/bin/gpnptool create -o="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -ovr -prf -prf_sq=1 -prf_cn=rac-scan -prf_pa="" -hnet=gen -gen:hnet_nm="*" -gen:net=net1 -net1:net_ip="10.8.0.0" -net1:net_ada="eth0" -net1:net_use="public" -gen:net=net2 -net2:net_ip="192.168.0.0" -net2:net_ada="eth1" -net2:net_use="cluster_interconnect" -css=css -css:css_dis="/u01/shared_config/voting_disk" -css:css_ld=400 -asm=asm -asm:asm_dis="++no-value-at-profile-creation--never-updated-through-ASM++" -asm:asm_spf="" '
2010-02-02 11:58:42: Removing file /tmp/fileXUKYkK
2010-02-02 11:58:42: Successfully removed file: /tmp/fileXUKYkK
2010-02-02 11:58:42: /bin/su successfully executed
2010-02-02 11:58:42: gpnptool: rc=0
2010-02-02 11:58:42: gpnptool output:
Resulting profile written to "/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml".
Success.
2010-02-02 11:58:42: gpnptool: run /u01/app/11.2.0/grid/bin/gpnptool sign -p="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -o="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -ovr -w="file:/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -rmws
2010-02-02 11:58:42: Running as user oracle: /u01/app/11.2.0/grid/bin/gpnptool sign -p="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -o="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -ovr -w="file:/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -rmws
2010-02-02 11:58:42: s_run_as_user2: Running /bin/su oracle -c ' /u01/app/11.2.0/grid/bin/gpnptool sign -p="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -o="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -ovr -w="file:/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -rmws '
2010-02-02 11:58:43: Removing file /tmp/file4E7Vnj
2010-02-02 11:58:43: Successfully removed file: /tmp/file4E7Vnj
2010-02-02 11:58:43: /bin/su successfully executed
2010-02-02 11:58:43: gpnptool: rc=0
2010-02-02 11:58:43: gpnptool output:
Resulting profile written to "/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml".
Success.
2010-02-02 11:58:43: GPnP peer profile create successfully completed.
2010-02-02 11:58:43: <--- GPnP peer profile successfully created
2010-02-02 11:58:43: GPnP local setup successfully created
2010-02-02 11:58:43: Registering ohasd
2010-02-02 11:58:43: init file = /u01/app/11.2.0/grid/crs/init/init.ohasd
2010-02-02 11:58:43: Copying file /u01/app/11.2.0/grid/crs/init/init.ohasd to /etc/init.d directory
2010-02-02 11:58:43: Setting init.ohasd permission in /etc/init.d directory
2010-02-02 11:58:43: init file = /u01/app/11.2.0/grid/crs/init/ohasd
2010-02-02 11:58:43: Copying file /u01/app/11.2.0/grid/crs/init/ohasd to /etc/init.d directory
2010-02-02 11:58:43: Setting ohasd permission in /etc/init.d directory
2010-02-02 11:58:43: Removing "/etc/rc.d/rc3.d/S96ohasd"
2010-02-02 11:58:43: Removing file /etc/rc.d/rc3.d/S96ohasd
2010-02-02 11:58:43: Failure with return code 1 from command rm /etc/rc.d/rc3.d/S96ohasd
2010-02-02 11:58:43: Failed to remove file:
2010-02-02 11:58:43: Creating a link "/etc/rc.d/rc3.d/S96ohasd" pointing to /etc/init.d/ohasd
2010-02-02 11:58:43: Removing "/etc/rc.d/rc5.d/S96ohasd"
2010-02-02 11:58:43: Removing file /etc/rc.d/rc5.d/S96ohasd
2010-02-02 11:58:43: Failure with return code 1 from command rm /etc/rc.d/rc5.d/S96ohasd
2010-02-02 11:58:43: Failed to remove file:
2010-02-02 11:58:43: Creating a link "/etc/rc.d/rc5.d/S96ohasd" pointing to /etc/init.d/ohasd
2010-02-02 11:58:43: Removing "/etc/rc.d/rc0.d/K19ohasd"
2010-02-02 11:58:43: Removing file /etc/rc.d/rc0.d/K19ohasd
2010-02-02 11:58:43: Failure with return code 1 from command rm /etc/rc.d/rc0.d/K19ohasd
2010-02-02 11:58:43: Failed to remove file:
2010-02-02 11:58:43: Creating a link "/etc/rc.d/rc0.d/K19ohasd" pointing to /etc/init.d/ohasd
2010-02-02 11:58:43: Removing "/etc/rc.d/rc1.d/K19ohasd"
2010-02-02 11:58:43: Removing file /etc/rc.d/rc1.d/K19ohasd
2010-02-02 11:58:43: Failure with return code 1 from command rm /etc/rc.d/rc1.d/K19ohasd
2010-02-02 11:58:44: Failed to remove file:
2010-02-02 11:58:44: Creating a link "/etc/rc.d/rc1.d/K19ohasd" pointing to /etc/init.d/ohasd
2010-02-02 11:58:44: Removing "/etc/rc.d/rc2.d/K19ohasd"
2010-02-02 11:58:44: Removing file /etc/rc.d/rc2.d/K19ohasd
2010-02-02 11:58:44: Failure with return code 1 from command rm /etc/rc.d/rc2.d/K19ohasd
2010-02-02 11:58:44: Failed to remove file:
2010-02-02 11:58:44: Creating a link "/etc/rc.d/rc2.d/K19ohasd" pointing to /etc/init.d/ohasd
2010-02-02 11:58:44: Removing "/etc/rc.d/rc4.d/K19ohasd"
2010-02-02 11:58:44: Removing file /etc/rc.d/rc4.d/K19ohasd
2010-02-02 11:58:44: Failure with return code 1 from command rm /etc/rc.d/rc4.d/K19ohasd
2010-02-02 11:58:44: Failed to remove file:
2010-02-02 11:58:44: Creating a link "/etc/rc.d/rc4.d/K19ohasd" pointing to /etc/init.d/ohasd
2010-02-02 11:58:44: Removing "/etc/rc.d/rc6.d/K19ohasd"
2010-02-02 11:58:44: Removing file /etc/rc.d/rc6.d/K19ohasd
2010-02-02 11:58:44: Failure with return code 1 from command rm /etc/rc.d/rc6.d/K19ohasd
2010-02-02 11:58:44: Failed to remove file:
2010-02-02 11:58:44: Creating a link "/etc/rc.d/rc6.d/K19ohasd" pointing to /etc/init.d/ohasd
2010-02-02 11:58:44: The file ohasd has been successfully linked to the RC directories
2010-02-02 11:58:44: Starting ohasd
2010-02-02 11:58:44: itab entries=
2010-02-02 11:58:49: Created backup /etc/inittab.no_crs
2010-02-02 11:58:49: Appending to /etc/inittab.tmp:
2010-02-02 11:58:50: h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/null
2010-02-02 11:58:50: Done updating /etc/inittab.tmp
2010-02-02 11:58:50: Saved /etc/inittab.crs
2010-02-02 11:58:50: Installed new /etc/inittab
2010-02-02 11:58:55: ohasd is starting
2010-02-02 11:58:55: Checking ohasd
2010-02-02 11:58:55: ohasd started successfully
2010-02-02 11:58:55: Creating CRS resources and dependencies
2010-02-02 11:58:55: Configuring HASD
2010-02-02 11:58:55: Registering type ora.daemon.type
2010-02-02 11:58:59: Registering type ora.mdns.type
2010-02-02 11:59:00: Registering type ora.gpnp.type
2010-02-02 11:59:01: Registering type ora.gipc.type
2010-02-02 11:59:02: Registering type ora.cssd.type
2010-02-02 11:59:04: Registering type ora.cssdmonitor.type
2010-02-02 11:59:07: Registering type ora.crs.type
2010-02-02 11:59:08: Registering type ora.evm.type
2010-02-02 11:59:09: Registering type ora.ctss.type
2010-02-02 11:59:10: Registering type ora.asm.type
2010-02-02 11:59:13: Registering type ora.drivers.acfs.type
2010-02-02 11:59:14: Registering type ora.diskmon.type
2010-02-02 11:59:34: ADVM/ACFS is configured
2010-02-02 11:59:35: Successfully created CRS resources for cluster daemon and ASM
2010-02-02 11:59:35: Checking if initial configuration has been performed
2010-02-02 11:59:35: Starting CSS in exclusive mode
2010-02-02 12:00:04: CRS-2672: Attempting to start 'ora.gipcd' on 'vis'
2010-02-02 12:00:04: CRS-2672: Attempting to start 'ora.mdnsd' on 'vis'
2010-02-02 12:00:04: CRS-2676: Start of 'ora.gipcd' on 'vis' succeeded
2010-02-02 12:00:04: CRS-2676: Start of 'ora.mdnsd' on 'vis' succeeded
2010-02-02 12:00:04: CRS-2672: Attempting to start 'ora.gpnpd' on 'vis'
2010-02-02 12:00:04: CRS-2676: Start of 'ora.gpnpd' on 'vis' succeeded
2010-02-02 12:00:04: CRS-2672: Attempting to start 'ora.cssdmonitor' on 'vis'
2010-02-02 12:00:04: CRS-2676: Start of 'ora.cssdmonitor' on 'vis' succeeded
2010-02-02 12:00:04: CRS-2672: Attempting to start 'ora.cssd' on 'vis'
2010-02-02 12:00:04: CRS-2672: Attempting to start 'ora.diskmon' on 'vis'
2010-02-02 12:00:04: CRS-2676: Start of 'ora.diskmon' on 'vis' succeeded
2010-02-02 12:00:04: CRS-2676: Start of 'ora.cssd' on 'vis' succeeded
2010-02-02 12:00:04: Querying for existing CSS voting disks
2010-02-02 12:00:04: Performing initial configuration for cluster
2010-02-02 12:00:51: Start of resource "ora.ctssd -init" Succeeded
2010-02-02 12:00:51: Creating or upgrading OCR keys
2010-02-02 12:00:51: Command return code of 255 (65280) from command: /u01/app/11.2.0/grid/bin/ocrconfig -upgrade oracle oinstall
2010-02-02 12:00:51: Failed to create Oracle Cluster Registry configuration, rc 255
2010-02-02 12:00:51: Exiting exclusive mode
2010-02-02 12:00:51: Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
2010-02-02 12:00:51: Stop of resource "ora.crsd -init" failed
2010-02-02 12:00:51: Failed to stop CRSD
2010-02-02 12:01:20: Initial cluster configuration failed. See /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_vis.log for detailsHi,
I am trying to setup Oracle 11gR2 RAC setup on RHEL 5.4 64-bit machine, during grid installation i am also getting the same error.
2010-07-12 03:12:42: Removing file /etc/rc.d/rc6.d/K19ohasd
2010-07-12 03:12:42: Failure with return code 1 from command rm /etc/rc.d/rc6.d/K19ohasd
2010-07-12 03:12:42: Failed to remove file:
2010-07-12 03:12:42: Creating a link "/etc/rc.d/rc6.d/K19ohasd" pointing to /etc/init.d/ohasd
2010-07-12 03:12:42: The file ohasd has been successfully linked to the RC directories
2010-07-12 03:12:42: Starting ohasd
2010-07-12 03:12:42: itab entries=
2010-07-12 03:12:47: Created backup /etc/inittab.no_crs
2010-07-12 03:12:47: Appending to /etc/inittab.tmp:
2010-07-12 03:12:47: h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/null
2010-07-12 03:12:47: Done updating /etc/inittab.tmp
2010-07-12 03:12:47: Saved /etc/inittab.crs
2010-07-12 03:12:47: Installed new /etc/inittab
2010-07-12 03:13:03: ohasd is starting
2010-07-12 03:13:03: Checking ohasd
2010-07-12 03:13:03: ohasd started successfully
2010-07-12 03:13:03: Creating CRS resources and dependencies
2010-07-12 03:13:03: Configuring HASD
2010-07-12 03:13:03: Registering type ora.daemon.type
2010-07-12 03:13:04: Registering type ora.mdns.type
2010-07-12 03:13:04: Registering type ora.gpnp.type
2010-07-12 03:13:04: Registering type ora.gipc.type
2010-07-12 03:13:05: Registering type ora.cssd.type
2010-07-12 03:13:05: Registering type ora.cssdmonitor.type
2010-07-12 03:13:06: Registering type ora.crs.type
2010-07-12 03:13:06: Registering type ora.evm.type
2010-07-12 03:13:07: Registering type ora.ctss.type
2010-07-12 03:13:07: Registering type ora.asm.type
2010-07-12 03:13:08: Registering type ora.drivers.acfs.type
2010-07-12 03:13:08: Registering type ora.diskmon.type
2010-07-12 03:13:35: ADVM/ACFS is configured
2010-07-12 03:13:35: Successfully created CRS resources for cluster daemon and ASM
2010-07-12 03:13:35: Checking if initial configuration has been performed
2010-07-12 03:13:35: Starting CSS in exclusive mode
2010-07-12 03:14:04: CRS-2672: Attempting to start 'ora.gipcd' on 'lodvmrhn3'
2010-07-12 03:14:04: CRS-2672: Attempting to start 'ora.mdnsd' on 'lodvmrhn3'
2010-07-12 03:14:04: CRS-2676: Start of 'ora.mdnsd' on 'lodvmrhn3' succeeded
2010-07-12 03:14:04: CRS-2676: Start of 'ora.gipcd' on 'lodvmrhn3' succeeded
2010-07-12 03:14:04: CRS-2672: Attempting to start 'ora.gpnpd' on 'lodvmrhn3'
2010-07-12 03:14:04: CRS-2676: Start of 'ora.gpnpd' on 'lodvmrhn3' succeeded
2010-07-12 03:14:04: CRS-2672: Attempting to start 'ora.cssdmonitor' on 'lodvmrhn3'
2010-07-12 03:14:04: CRS-2676: Start of 'ora.cssdmonitor' on 'lodvmrhn3' succeeded
2010-07-12 03:14:04: CRS-2672: Attempting to start 'ora.cssd' on 'lodvmrhn3'
2010-07-12 03:14:04: CRS-2672: Attempting to start 'ora.diskmon' on 'lodvmrhn3'
2010-07-12 03:14:04: CRS-2676: Start of 'ora.diskmon' on 'lodvmrhn3' succeeded
2010-07-12 03:14:04: CRS-2676: Start of 'ora.cssd' on 'lodvmrhn3' succeeded
2010-07-12 03:14:04: Querying for existing CSS voting disks
2010-07-12 03:14:05: Performing initial configuration for cluster
2010-07-12 03:14:06: Start of resource "ora.ctssd -init" Succeeded
2010-07-12 03:14:06: Creating or upgrading OCR keys
2010-07-12 03:14:06: Command return code of 255 (65280) from command: /u01/app/11.2.0/grid/bin/ocrconfig -upgrade oracle oinstall
2010-07-12 03:14:06: Failed to create Oracle Cluster Registry configuration, rc 255
2010-07-12 03:14:06: Exiting exclusive mode
2010-07-12 03:14:06: Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
2010-07-12 03:14:06: Stop of resource "ora.crsd -init" failed
2010-07-12 03:14:06: Failed to stop CRSD
2010-07-12 03:14:34: Initial cluster configuration failed. See /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_lodvmrhn3.log for details
Please hel me to resole the issue.
I have followed exact steps mentioned in the http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnLinuxUsingNFS.php -
[Error during Export] R3load exited with return code 11
Hi guys,
While performing and Unicode Migration, during Export Phase, Migration Monitor returned the following error while exporting a package
ERROR: 2014-06-01 10:57:44 com.sap.inst.migmon.LoadTask run
Unloading of 'REGUC' export package is interrupted with R3load error.
Process '/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error' exited with return code 11.
For mode details see 'REGUC.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
REGUC.log details:
(As you see, it does not provide reasons of this error, all messages are informative and alike all other Packages logs)
/usr/sap/ECP/DVEBMGS00/exe/R3load: START OF LOG: 20140601105052
/usr/sap/ECP/DVEBMGS00/exe/R3load: sccsid @(#) $Id: //bas/740_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/usr/sap/ECP/DVEBMGS00/exe/R3load: version R7.40/V1.8
Compiled Jul 23 2013 21:30:53
/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC001.xml" created.
(GSI) INFO: dbname = "ECP20030615080638
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "ecp "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
Tried to find what does R3load Return Code 11 means, but I couldnt find further information on this.
Any hint of what is causing this error?
(Please disregard any Filesystem issues since all of them have available space)
Best!After using latest R3load patch, it provides furher information on the log file.
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.070) R3ldctl: fix CDS views creation in upgrade export mode (note 2
017805)
DBSL patchinfo (patches.h): (0.022) Smaller corrections in release 7.40 (th, dp, vmc, dpmon)
(note 1821404)
--------------------- End of patch information -------------------------
process id 27326
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC003.xml" created.
(GSI) INFO: dbname = "ECP20030615080638
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "ecp "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
(GSI) INFO: instno = "6120023288"
(RTF) ########## WARNING ###########
Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: cannot find version token "ver:" at line 1
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: unknown file format, assuming version 2
(EXP) INFO: table REGUC will be exported with sorting (task modifier)
------------------ C-STACK ----------------------
[0] t_splay ( 0x1020df850, 0xb3, 0x4386, 0x100a02078, 0x0, 0x1020df870 ), at 0xffffffff7b9629
94
[1] t_delete ( 0x1020df850, 0x4348, 0x1d9870, 0x1000d0408, 0xffffffff7bb3c000, 0x0 ), at 0xff
ffffff7b9627e4
[2] realfree ( 0x101ee7590, 0x1f82b1, 0x1d9cd0, 0x1f82b0, 0xffffffff7bb3c000, 0x101ee7590 ),
at 0xffffffff7b9623b0
[3] _malloc_unlocked ( 0x7d40, 0x200000, 0x101edf840, 0x0, 0x101ee7580, 0x0 ), at 0xffffffff7
b961eb4
[4] malloc ( 0x7d39, 0x2388, 0x1da428, 0x10038fe84, 0xffffffff7bb3c000, 0x2000 ), at 0xffffff
ff7b961c28
[5] rstg_get ( 0x2, 0x0, 0x2, 0x7d10, 0x0, 0x10077d8c0 ), at 0x10038ff4c
[6] c3_uc_new_cache ( 0x100a02078, 0x284db0, 0x284c00, 0x10077d8c0, 0x100a02108, 0xb3 ), at 0
x1000d1ce8
[7] c3_uc_seek_cache ( 0xb3, 0xff79, 0xffffffff7ffcae3e, 0x100a02078, 0x10189fa48, 0x10077d8c
0 ), at 0x1000d188c
[8] c3_uc_new_tabcache ( 0x0, 0xb3, 0x4386, 0x100a02078, 0xb3, 0x10077d8c0 ), at 0x1000d13fc
[9] c3_uc_insert_record_in_cache ( 0xffffffff7ffcb04e, 0x10189fa48, 0x100a02078, 0x100a024c8,
0xb3, 0x1058c8f84 ), at 0x1000d0408
[10] c3_uc_insert ( 0x0, 0x100a02078, 0x0, 0x0, 0x10077d8c0, 0xffffffff7ffcb04e ), at 0x1000c
f944
[11] c3_uc_convert_table_entry ( 0x1015c61f8, 0x0, 0x100a02078, 0x0, 0x10189f408, 0x31a000 ),
at 0x1000ce314
[12] c3_uc_convert_logic_table ( 0x1015c61f8, 0x100a02078, 0x0, 0x4a, 0x100638dc0, 0x10077d8c
0 ), at 0x1000cdb18
[13] c3_uc_convert_cluster_data ( 0x100a02078, 0xffffffff7ffcbc50, 0x1015c6428, 0x1015c61f8,
0x10077d8c0, 0x0 ), at 0x1000cd10c
[14] c3_uc_convert_cluster_item ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x1038
6f6e0, 0xffffffff7ffcbb8c, 0x100a02812 ), at 0x1000be1d4
[15] process_task ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x100a02810, 0x10063
32e0, 0x10077d8c0 ), at 0x1000b2f58
[16] CnvCluster ( 0x1014642d0, 0x100954670, 0x100aa9610, 0x2849b8, 0x284800, 0x6cb978 ), at 0
x1000b1f8c
[17] cnv_clust2 ( 0x100aa9580, 0xffffffff7ffcc258, 0x100954770, 0xfc0, 0x107d00, 0x100954670
), at 0x100062714
[18] cnv_cp ( 0x100aa9580, 0xffffffff7ffcc258, 0x100aa95e0, 0x0, 0x10077d8c0, 0x1d6c00 ), at
0x100064644
[19] process_buffer ( 0x100aa9580, 0xffffffff7ffcc258, 0xfff00, 0x100a97bd0, 0x10, 0x100aa95b
0 ), at 0x10007162c
[20] execute_table_unload ( 0xffffffff7ffed610, 0xffffffff7ffdc4b0, 0x0, 0x100aa9580, 0xfffff
fff7ffcc258, 0x10077d8c0 ), at 0x10006c488
[21] export_table_task ( 0xffffffff7ffed610, 0x0, 0xffffffff7ffdc368, 0xffffffff7ffcc330, 0xf
fffffff7ffeedb8, 0xffffffff7ffeec60 ), at 0x10006c934
[22] db_unload ( 0x100a97b0d, 0xffffffff7ffed610, 0x0, 0x10077d8c0, 0xffffffff7ffeec60, 0xfff
fffff7bb47540 ), at 0x10006d148
[23] main_r3ldmain ( 0x72ec00, 0xffffffff7ffff448, 0xffffffff7ffff228, 0xffffffff7bb47540, 0x
1005fc290, 0x0 ), at 0x1000514e0 -
ECC 6 Upgrade Error : RETURN CODE in RSVBCHCK.DV2
Dear all,
We are doing an upgrade from 4.6c to ECC6.0, we have faced the below error (warnings) in the CHECKS.LOG file.
A2EEMCEX 151 Entries for application "03" still exist in the extraction queue ->
Long text:
Cause
You are not allowed to change the extract structure &V#& for
application "03". This is because unprocessed entries are still present
in an extraction queue of application "03" for at least one client.
If an extraction structure is changed for which there are still open
entries in an extraction queue, these entries can no longer be read and
the collective update terminates.
What to do
Start the collective update using the "Job-Control" function in the
<DS:TRAN.LBWE>Logistics Extract Structure Customizing Cockpit</>.
You can get an overview of logistic extraction queues in the
<DS:TRAN.LBWQ>Log. Queue Overview</>.
A2EEMCEX 141 Struct. Appl. "03" cannot changed because restruct. -> Long text" ""MC03BF0SETUP""300"
Long text:
Cause
Changing the extract structure &V#& for application "03" is not
permitted, because the restructure table &V#& for the extractor still
contains data in &V#&.
You cannot change the structure in this status, because when you load
an InfoPackage from BW, this leads to errors.
What to do
<DS:TRAN.LBWG>Delete</> the entries for all restructure tables for
application "03".
A2EEMCEX 141 Struct. Appl. "04" cannot changed because restruct. -> Long text" ""MC04P_0ARBSETUP""300"
Long text: see above
A2EEMCEX 141 Struct. Appl. "04" cannot changed because restruct. -> Long text" ""MC04P_0COMSETUP""300"
Re: Upgrade Question: SMQ1 Queues and an Error during JOB_RSVBCHCK2 &
CHECK OF UPDATE TASK Errors and RETURN CODE in RSVBCHCK.MX1
Where in we they have advised to delete the structure in LBWG.
Here we don't have a BW team, but if I delete that will it lose any data? or how do I tackle this problem
Pl advise
If I am write this is used by vertex
Regards
SenthilThose extract structures can be "rebuilt" using the transaction SBIW. They are needed if you initially fill the data into BI/BW or if you must re-load everything. It's safe to delete them.
Markus -
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA700VT1.LBP During Prepare
Hi Gurus,
For The Error mesage During prepare
Restart logs of DB conversions found
n Outstanding DB conversions found
We refer the Upgrade Guide & followed the steps thro SE14 Choose >DB Requests> Terminated .
Nothing found.
Then we Edit the Table found in error log ( CONV ENTRY TBATG INDX/BIC/FZLDEL_C11 0600CREB 200710032STEAM) . & by mistekan used the option Extras > Force conversion.
Now table TABTG is missing in from DATA Base & we are facing the Error
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA700VT1.LBP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "12"
Again when we check SE14 Choose >DB Requests> Terminated it shows one Entry TBATG but is not exist now
Help meHi,
Did you checked SM13 or SMQ1? that´s the probable cause for that error, now you should open an OSS note or start all over again. -
Received return code 500 ( Error during conversion of XI message )
Hello Experts,
I am configuring the WSRM for SD in SAP. I have only configured services CreditWorthinessQuery_Out and CreditWorthinessQuery_In on soamanager to carry out credit checks.
while i am creating sales order i am getting below error.
Received return code 500 ( Error during conversion of XI message )
In debug i checked the string of error it showed me below string :
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">#<SOAP:Hea
der>#</SOAP:Header>#<SOAP:Body>#<SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.o
rg/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Error during c
onversion of XI message</faultstring><faultactor>http://sap.com/xi/XI/Message/30
</faultactor><detail><SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.co
m/xi/XI/Message/30"><SAP:Category>XIProtocol</SAP:Category><SAP:Code area="PARSE
R">UNEXPECTED_VALUE</SAP:Code><SAP:P1>Main/@versionMajor</SAP:P1><SAP:P2>000</SA
P:P2><SAP:P3>003</SAP:P3><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMess
age namespace=""/><SAP:Stack>XML tag Main/@versionMajor has incorrect value 000;
expected value is 003##</SAP:Stack></SAP:Error></detail></SOAP:Fault>#</SOAP:Bo
dy>#</SOAP:Envelope>#
Does anyone have any idea about this? I am not integrating with PI/XI system.Hi
Can you check this out?
Transaction SXMB_ADM Integration Engine Configuration
For an application system you have to maintain the role of the business system as an application system. Set the corresponding Integration Server as an HTTP destination (for example, dest://INTEGRATION_SERVER). Create the destination in transaction SM59 and set the type to HTTP Connections to R/3 System. Test the connection by using the Connection Test button; you should get HTTP 500 u2013 Empty HTTP Request received, because no u201Ereal‟ XML document is sent during this test.
A HTTP return code 500 (Internal Server Error) is OK.
Regards
Pothana -
Error during reading T001G (Return code
Hi experts,
In vl33n ( Inbound Delivery ) , Extras > Delivery Output >Select o/p type and ,
when I press Processing Log for a Inbound Delivery Output I get Following Errors
"Error during reading TVKO (Return Code 4)"
Error during reading T001G (Return code 4
What should be done?
Thanks so much in advance!Hello Kaustubh,
What is the processing mode of the output type. If processing type is any of the below :-
1. Print - Set a break-point in the driver program and click on print preivew.
2.EDI - Trigger output type and change processing mode to periodic(click on futher data tab) .
Run RSNAST00 program with output type and inbound delivery as input parameters.
Debug the driver program to know the actual root cause
Thanks -
Error during reading T001G (Return code 4
Hi experts,
In vl33n ( Inbound Delivery ) , Extras > Delivery Output >Select o/p type and ,
when I press Processing Log for a Inbound Delivery Output I get Following Errors
"Error during reading TVKO (Return Code 4)"
Error during reading T001G (Return code 4
What should be done?
Thanks so much in advance!Hello Kaustubh,
What is the processing mode of the output type. If processing type is any of the below :-
1. Print - Set a break-point in the driver program and click on print preivew.
2.EDI - Trigger output type and change processing mode to periodic(click on futher data tab) .
Run RSNAST00 program with output type and inbound delivery as input parameters.
Debug the driver program to know the actual root cause
Thanks -
I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?
Well I spoke too soon.
The update was successful, but now I cannot connect to the 3GS data network.
Cannot get email and cannot open a page in Safari.
+"Safari could not open the page because the server stopped responding."+
+"Cannot Get Mail+
+THe mail server is not responding. Verify that you have entered the correct account info in Mail settings."+
Email and internet work fine on WiFi.........no data using 3GS network.
Looks like I will have to revert back to old OS. -
Why can't I uninstall AirPort 4.2 from my Windows 7 PC.. I tried downloading and reinstalling the 4.2 but during the installation process I get an error. It reads... "1608: Unable to Create InstallDriver instance Return Code -2147024894
You should not install it again..
Boot the computer into safe mode and try the uninstall again.
No luck you will have to manually uninstall which is a pain. Delete the files and open regedit and delete the registry entries.. better still use the system restore to go back to a previous system where you had no 4.2 installed..
Or just ignore it and install the latest 5.6.1 and if it gives trouble well do a clean install of windows. -
SAINT upgrade : error: return Code:0212
Hi!
i going to update SPAM/SAINT upgrade.
My machine has 4.7ee (IDES Edition), Oracle 8i and Windows as OS.
When i check Spam level by default Version 620/0008. i am tring to upgrade Version 620/00223( bec. when i search in service market place, only Version 22, 23 only available).
Q: Is it possible to upgrade directly from Version 08 to 23???.
Anyhow, i was extracted .car file in eps\in directory as sidadm admin.
And i go to 000 as DDIC user, and use SPAMload packagefrom appl server.
then, Import SPAM/SAINT update.
The Import was terminated along with following message.
Error in Step: CHECK_REQUIREMENTS
Cause of error: TP_CANNOT_CONNECT_SYSTEM
Return Code: 0212
Error Message: Could not access files as supposed (see SLOG for more details).
And
In SPAM,
Status : SPAM update is being processed.
Spam status: RED
Import step: CHECK_REQUIREMENTS
Kindly give me solution pls......
regards
raghuhi!
i was reconfigured TMS. Now diff error will appear.
Error in Step:
Cause of error: CANNOT_CREATE_COFILES
Return Code: 7
kindly give solutions pls......
regards
raghu -
Exception Deployer fails with return code 1603 during Acrobat XI installation
We are deploying Acrobat XI to Windows 7 clients and a percentage of them fail to execute Exception Deployer successfully and are returning the 1603 return code. I have pasted below relevant portions of the ExceptionDeployer.log file from two different computers with the same return code. Sometimes running the installation again works but sometimes it fails again with the same error code. I haven't been able to find exactly what it is that is failing or how to resolve this.
4/4/2015 00:04:57 [INFO] ExceptionDeployer - ##################################################
4/4/2015 00:04:57 [INFO] ExceptionDeployer - Launching the ExceptionDeployer...
4/4/2015 00:04:57 [WARN] ExceptionDeployer - Failed to initialize the TokenResolver properly.
4/4/2015 00:04:57 [INFO] ExceptionDeployer - **************************************************
4/4/2015 00:04:57 [INFO] ExceptionDeployer - AcrobatProfessional11.0-mul
4/4/2015 00:05:59 [INFO] ExceptionDeployer - The process return code is (1603).
4/4/2015 00:05:59 [ERROR] ExceptionDeployer - Exception deployment failed for payload (AcrobatProfessional11.0-mul)
4/4/2015 00:05:59 [INFO] ExceptionDeployer - **************************************************
4/6/2015 16:05:56 [INFO] ExceptionDeployer - ##################################################
4/6/2015 16:05:56 [INFO] ExceptionDeployer - Launching the ExceptionDeployer...
4/6/2015 16:05:56 [INFO] ExceptionDeployer - **************************************************
4/6/2015 16:05:56 [INFO] ExceptionDeployer - AcrobatProfessional11.0-mul
4/6/2015 16:07:14 [INFO] ExceptionDeployer - The process return code is (1603).
4/6/2015 16:07:14 [ERROR] ExceptionDeployer - Exception deployment failed for payload (AcrobatProfessional11.0-mul)
4/6/2015 16:07:14 [INFO] ExceptionDeployer - **************************************************Hi ohtesw,
Please check out this document: Error 1603: A fatal error occurred during installation.
If the solutions in that document don't do the trick, please let us know.
Best,
Sara
Maybe you are looking for
-
Hp pavilion dv6 recovery fails
hey everyone first post on the forum i have an hp pavilion dv6 that came with 64 bit windows 7 home premium installed. i tried to dual boot Ubuntu with it and ended up overwriting windows. lots more story but i ended up calling hp and ordering recove
-
SmartForms - Is there a way to put PDF attachment in the body of Email?
Hello All, Currently I have a Smart Form that generates an MAIL with a PDF attachment. It works very nicely with from, to, and subject information correct. A new request from the users is to show in the PDF output in the email vs. an attachment. T
-
Macbook pro: enough grunt to multicam edit off FW400 ext drive
Have a rev A Macbook Pro with 1.5gig RAM. It seems to be choking on a two camera edit (one hour long) from media stored on a FW400 hd drive. It is reporting dropped frames etc
-
I need help. I can not print from QUICKEN to my HP Officejet J6480 printer. Nothing happens. It was working in the recent past. NOw that I need to print out the remainder of my record for income tax prep, it won't print. I can not thinnk of a si
-
Assign purchase organization to more than one co codes??
Hey gurus... Can somebody tell me to how can we assign same purchase organization to more than one company code? Ganesh.....