TPID not Derive from Intracompany Asset Transfer

Hi,
I'm facing a problem with Intracompany asset transfer ~ Trading Partner is not auto derive from the asset transfer posting.
Currently I'm using a customize transfer variant (copy from transfer variant 4).  The only difference is that the customize one do not copy the original master data details (cost ctr, plant, etc) to a new asset.
Is there any other way that I can use to make the TPID automatically derive from this transaction?
TQ.

Hi,
check the transfer variant concerning the Transfer of Fields for new Assets in Target Company Codes. IMG Asset Accounting -> Transactions -> Intercompany Asset Transfers -> Automatic Intercompany Asset Transfers -> Define Transfer Variants. On the popup choose "Specify Transfer of Fields (for New Asset in Target CoCd)" ... here you can set up which fields are taken over, when you create new assets within the transfer posting.
Regards,
Markus

Similar Messages

  • Commitment item can not derived from main asset number

    Dear all,
    Our client have 1 G/L LVA and divided to many asset class LVA. Asset lva will post to general expense when run depreciation, and they want the acquisition/procurement of LVA should check the budget of the general expense.
    It means the acquisition of LVA will check the budget of general expense, then no budget when run depreciation.
    I already setting for no check budget for run depreciation. However, i found trouble when set the derivation from main asset number to commitment item. I want to set from main asset number because only 1 G/L LVA.
    Derivation rule from main asset number not populated to commitment item which i'm expecting, example
    FMDERIVE (1)   CI from main asset number (for acquisition)
                       asset number         CI
                      23000000000        7400000102
    FMDERIVE  (2)  CI from g/l account
                       G/L acct.                CI
                     2290000001          2290000001
    Because asset number 23000000000 assign to g/l 2290000001, then the tracing always read the g/l account, then derive to commititem 2290000001 NOT to 7400000102.
    I already give many condition however it can not work. Even i deactivate fmderive (2), asset number can not populate to relevant commitment item.
    Please give me advice how derive the commitment item from main asset number or relevan things.
    Regards,
    Dewi

    Hi Dewi
    Please have a look at these notes which I think are interesting:
    [736914|https://service.sap.com/sap/support/notes/736914]     Budget relevance of asset transactions
    [1268001|https://service.sap.com/sap/support/notes/1268001] FI313 - No funds center entered/derived
    So, if you need to derive the FMAA from the Asset master data, you could enable a derivation step calling function module FMDT_READ_MD_ASSET. Take care of following derivation steps which may be overwriting the derived values from FMDT_READ_MD_ASSET. See the trace log, according to note [666322|https://service.sap.com/sap/support/notes/666322]
    Cheers
    Mar

  • VENTURE DETAILS NOT DERIVED FROM 0001

    while posting through F-43 a vendor getting credited and a bank commission a/c (balance sheet a/c) getting debited where after simulating and posting the document at the time of saving it is showing ' VENTURE DETAILS NOT DERIVED FROM 0001'. Is it due to that G/L is not defined in Balance sheet adjustment A/c group. there is no WBS only a cost object is entered in line item of Vendor. Pls reply

    Is it error?
    When you have error, always post the message number

  • Whole clips not tranfering from log and transfer into FCP studio 2

    720p 24p clips from P2 get cut short when transfered from log and transfer. I can play the whole clips in the log and transfer window to verify they are there but once they are brought into my project they play about half way through, then the sound drops out and the clip stops short of where it really ended. the clips in the canvas window or on the timeline when played all the way to the end are not the complete original clip? i have tried switching every setting i can think of but to no avail. any ideas out there? thanks a million

    no, no in or out points set in log and capture. what's wierd is that clips shot at 24 fps are the ones running short and clips shot at 60 fps come in fine (the slow motion isn't happening but i think i can change that with cinema tools?) anyway, thanks for the suggestion

  • Intracompany asset transfer

    Dear Experts,
    I have triedto transfer asset within company code, e.g: from asset A to asset B (new asset number). My question is after asset transferred, is the old asset will automatically deactivated or  not? If yes, from which tcode I could check this issue?
    Thank you in advance

    Hi,
    When you fill in values in the tab partial transfere then the asset is not retired! (even 100%)
    You cab do a retitement again with the transaction ABAVN - Asset Retirement by Scrapping. When there are no values on the asset  it will place the retirement bit and create no postings.
    Paul

  • S_ALR_87012054-Intracompany Asset Transfer

    I am trying to run the repor S_ALR_87012054 and the system shows me a message AB064 which says 'No data was selected'. I have many intracompany transfer for the period.
    The problem is with the transfer of current year, because if I make the ones with ts types of the previous year they will be showed by the report.
    Any idea??
    thanks,
    Cecilia

    Hi,
    transfer of current year acquisition is always treated as acquisition. Start the acquisition report, there you will find the transactions.
    Same with the Asset History Sheet (sheet version 0001) ... only transfer of prior year APC is listed under transfers.
    Regards,
    Markus

  • Mass Intracompany asset transfer

    We need to change the account assignment on multiple asset records.  Is there a way to perform a mass intracompany transfer?

    In ABUMN screen we have a push button Multiple Assets in Application Tool Bar. Pleae try with it.

  • Ipod will not update from library after transfer from one PC to another?!?

    I recently transfered my itunes library from one PC to another using the ipod hard drive and according to the directions listed on this site. All went smooth and roughly 12GB of music transferred. After all music was successfully transfered to the library on the new PC I reconnected my ipod via USB hub and the dialog box popped up asking if I now want to associate my ipod with this new computer. I replied Yes.
    As expected the program then deleted all 3000 songs off of my ipod and was supposed to then upload all the songs from my library (all songs were checked) back onto my ipod. For some reason all that happens is it says "update complete" and no songs transfer. I now have 3000+ songs in my library and ZERO on my ipod! I've checked all the default settings to be sure it is set to automatically update, all songs are checked and the box is checked to update checked songs, etc. I've shut down and restarted my PC and even tried several different USB hubs. Also, if relevant, when I connect my ipod the computer itunes recognizes it and it shows up on the itunes screen, but just for a few seconds. After it says it has successfully updated my ipod (I wish...) the little tab which shows "Chris' ipod" then disappears and itunes acts like it doesn't even know a device is connected.
    I'm lost - I'd really appreciate any feedback anyone can provide. Thank you in advance!
    Chris
    20GB click wheel   Windows XP  

    I recently transfered my itunes library from one PC
    to another using the ipod hard drive and according to
    the directions listed on this site. All went smooth
    and roughly 12GB of music transferred. After all
    music was successfully transfered to the library on
    the new PC I reconnected my ipod via USB hub and the
    dialog box popped up asking if I now want to
    associate my ipod with this new computer. I replied
    Yes.
    As expected the program then deleted all 3000 songs
    off of my ipod and was supposed to then upload all
    the songs from my library (all songs were checked)
    back onto my ipod. For some reason all that happens
    is it says "update complete" and no songs transfer. I
    now have 3000+ songs in my library and ZERO on my
    ipod! I've checked all the default settings to be
    sure it is set to automatically update, all songs are
    checked and the box is checked to update checked
    songs, etc. I've shut down and restarted my PC and
    even tried several different USB hubs. Also, if
    relevant, when I connect my ipod the computer itunes
    recognizes it and it shows up on the itunes screen,
    but just for a few seconds. After it says it has
    successfully updated my ipod (I wish...) the little
    tab which shows "Chris' ipod" then disappears and
    itunes acts like it doesn't even know a device is
    connected.
    I'm lost - I'd really appreciate any feedback anyone
    can provide. Thank you in advance!
    Chris
    20GB click wheel  
    Windows XP  
    In iTunes Preferences, did you update the iTunes Library to the new location? In other words, are you pointing to the correct location on the new harddrive for your iTunes Library?
    Lisa

  • How to hightlight the text in a component which is not derived from JTextCo

    I have a swing componet, but it is not JTextComponent. I need to highlight the text in that compont when it gets the focus. How do I do that? Thanks,

    Methods inherited from class versata.vfc.VSChoiceBase ::
    addChoiceListener, addMissingChar, displayText, focusGained, focusLost, getBackground, getCodeTable, getDataFieldName, getDataFieldNumber, getDataSource, getDataSourceName, getDisabledForeground, getDisplayedText, getForeground, getForm, getFormat, getFormatter, getHelpURL, getMetaColumn, getNextFocusableComponent, getStatusText, getTabOrder, getTabStop, getTag, getTextComponent, getToolTip, grabFocus, initializeControl, isAllowMultipleValue, isDataDirty, isEditable, isFocusTraversable, isManagingFocus, keyReleased, keyTyped, mouseClicked, mouseDragged, mouseEntered, mouseExited, mouseMoved, mousePressed, mouseReleased, paintComponent, postEvent, processEvent, removeChoiceListener, requestFocus, reshape, setAllowMultipleValue, setBackground, setCodeTable, setDataDirty, setDataFieldName, setDataFieldNumber, setDataSource, setDataSourceName, setDisabledForeground, setEditable, setEnabled, setFont, setForeground, setFormat, setFormatter, setHelpURL, setNextFocusableComponent, setStatusText, setTabOrder, setTabStop, setTag, setToolTip, setToolTipText
    Methods in VSPickChoice
    afterFormInitialize, afterPickFill, beforePickFill, CurrentComponentChanged, CurrentDataControlChanged, dataChanged, getDisplayMode, getPick, getPickName, getQueryText, getText, hasPick, hideChoiceWindow, keyPressed, queryModeChanged, setDisplayMode, setPick, setPick, setPickName, setText, updateNotify

  • Intracompany asset transfer of depreciation only

    We have some assets that were loaded with our legacy load.  They have no APC value, only Accumulated Depreciation.
    Is it possible to partially transfer these assets to other assets Accumulated Depreciation that have APC without affecting the APC of receiving asset.
    Also, if I wanted to transfer the one asset to many assets, does anyone have a suggestion.
    Thanks

    Thanks Raj.  You are right, ABMA will work.  I was looking for something to allow me to transfer a large accumulated depreciation asset to the accumulated depreciation of many smaller assets.  I am talking about 1000's of assets so ABMA would be very time consuming.
    I am thinking that my best alternative may be ABAP.

  • Profit Center Field Not deriving during Asset Postings

    We are using document splitting functionality with profit center mandatory for any kind of posting.
    Scenario-Asset purchase through PO:
    1.Purchase Order -created
    2.At goods receipt error is coming balancing filed is not filled (bcoz asset is not a material), for materials we are giving profit center. in the asset master i assigned cost center, still profit center is not deriving.
    Scenario-Asset Purchase from vendor
    purchasing asset directly from vendor through F-90, against asset line item we have to assign profit center. Cost center & profit center is coming in display mode. in the asset master i already maintained cost center, still profit is not deriving.
    I already done config for field status asset account number (G067) andPosting Keys (70,75). I also checked note no.684659.
    how profit center will be derived for any kind of asset postings.
    Thanks
    Sai

    I think you might be using the account assignment category 'A' in the Purchase order for asset purchase. Please check the IMG for account assignment category thru transaction 'OME9'. For the relevant account assignment category you are using in the PO, tick the checkbox against 'Derive acct.assgt.'
    That should solve your problem.
    Regards,

  • Profit Center is not deriving in Asset acquisation through PO & Direct Acqu

    Hi
    I have a issue in asset accounting, kindly help me if u know....
    We are using document splitting functionality with profit center mandatory for any kind of posting.
    Scenario-Asset purchase through PO:
    1.Purchase Order -created
    2.At goods receipt error is coming balancing filed is not filled (bcoz asset is not a material), for materials we are giving profit center. in the asset master i assigned cost center, still profit center is not deriving.
    Scenario-Asset Purchase from vendor
    purchasing asset directly from vendor through F-90, against asset line item we have to assign profit center. Cost center & profit center is coming in display mode. in the asset master i already maintained cost center, still profit is not deriving.
    I already done config for field status asset account number (G067) andPosting Keys (70,75). I also checked note no.684659.
    how profit center will be derived for any kind of asset postings.
    Thanks,
    Anil kumar

    Priya,
    I have the same issue now. Did you get any solution for this. If so, please let me know.
    Thanks
    Sailaja

  • Asset depreciation from transfered asset

    Asset A original value 1100, depreciated 100 in Oct 2009, it transfered to asset B, if B is using sum of the years ddgits depreciation, and asset B useful life is 5 years, how SAP caculate 2009 planned depreciation? and how about year 2010
    and year 2014, tks

    Hi
    Normally before you perform Intracompany asset transfer, you do the reverse posting on Asset A and bring the balance back to 1100.
    Now you transfer the asset to B and the depreciation data mentioned would be applicable. It would recalculate the october depreciation as per the new key.
    Reg
    Suresh

  • Internal Order is not reading from Asset master through derivation Rule

    Hi,
    I entered Functional Module to read Asset Master data in derivation Rule. While procuring an Asset after selecting an asset the fund center, fund are coming automatically but Internal Order and Cost center is not picking automatically.
    It has to pick Internal Order automatically from Asset master data.
    Please guide me.
    Regards,
    Sree

    Hi,
    Internal order should come from the asset master data, with no connection to derivation strategy in FM. Regarding the cost centre, it's irrelevant when you purchase to an asset.
    Regards,
    Eli

  • Posting of retirement/transfer not possible(error in asset)

    Hi All,
    this is regarding intra company asset transfer through transaction code ABUMN. The issue is like below :
    Let's say asset code is 764 in 111 asset class & i am transferring this asset to 3615 in 112 asset class through ABUMN.
    Actaully in 2004, a part of the asset value has already been retired with scrap.So now the requirement is complete transfer the remaining amount. So while trasfer, the error shows and not allowing to post the transaction.
    There are several depreciation areas in the asset. The depreciation has been calculated for all the dep. area except 42(for US)
    As this book has pending the dep. since 2004, system doesn't allow to trasfer this asset. For this purpose, i have tried AFAR, ASKB but the issue is not solved.
    Kindly revert back with your valuable suggestions.
    Thanks,
    Raj

    Hi Raj,
    In most cases AA 465 is due to recalculation errors in the past on the asset in question. From your information I assume this is probaby due to depreciation area 42.         
    I do not know how you were able to close all following fiscal years if errors existed         
    on the assets with pending depreciation since 2004.                                                                               
    As you known, the indicator ANLC-XAFAR gives the information about errors in the calculation of depreciation.                                                                               
    0 No error occurred during depreciation calculation                                             
      1 Error occurred in depreciation calculation from previous yrs                                  
      2 Error occurred in depreciation calculation of current year     
    At this point it may be necessary to execute the report RACORR52 for the fiscal years   
    that may be closed now and for which the asset in question seems to have an incorrect entry for ANLC-XAFAR. You have to carefully check the asset beforehand though, to be sure that the values on the asset as such are correct as per your expectation.  Only then should you consider using the correction report RACORR52.        
    Please review the attached note in this regard, and follow the instructions given:                                                                               
    103749     -   RAJABS00: Error message AU069                                                                               
    This report is not in your system until you manually apply this source code.                                                                               
    Also review SAP note 141656 as it might help, too.                                                                               
    I hope this information helps you further.
    Kind regards,
    Brigitte

Maybe you are looking for