TPM BIOS Dialog Asks To Clear TPM - Dialog is not touch sensitive and will not proceed

When resetting Windows 10 on my Stream 8 it sends a request to the BIOS to clear the TPM after reaching 100%. The problem is that this dialog is not touch aware. I can't choose either option. Powering down the tablet just brings this back up when turned on. Holding vol down and powering up/down does the same. I can't find any way past this dialog box. HP phone support (Joey) is an absolute disaster. Joey blames Microsoft and believes it's his God-given right to do so and move on to the next call or, possibly, he just has no idea what he's doing. In any event he seemed quite determined, to the point of argumentative, to pass the buck. I think if there were some way to attach a keyboard I could get past this. I tried a bluetooth mouse, but it wasn't paired beforehand and doesn't seem to work. I was told by Best Buy that a USB/Micro USB adapator will not work with a standard USB keyboard (never tried it, seems dubious to me). Any ideas?

Thanks Olrs. That did work! I had seen a couple of posts that said to hold the down button with the power button but that didn't help. Both buttons performed a BIOS restore and then the reset completed normally. I do kind of wonder if the TPM was wiped or not (it would have to be stored in a different location than the BIOS to not get wiped I guess). That answer would have taken HP phone support one tenth of the time they spent arguing with me over this, and, like I said, it really wasn't a Microsoft issue at all.

Similar Messages

What does the open file dialog do 'under the hood' and is there a way to simulate it

What does the open file dialog do 'under the hood' and is there a way to simulate it?
I have a bug in my code (that I've posted about before, here) which I can't fix at the moment, but I do have a workaround.
Briefly, the bug:
I call a dll from a function node, to initialise and run a spectrometer. If I start up the PC, LabVIEW and run my vi the code runs without complaint, the first call to the dll to initialise the spectrometer doesn;t return an error but the spectrometer is not detected either.
I've tried various solutions, see the link above, and none work
The workaround:
If, at any time before running the code containing the function node I open an 'open file' dialog window, select the dll and click ok/hit enter then everything is fine. When I run the main code the spectrometer is detected.
I use an express vi to open the file dialog, I specify the start path and file name as constant inputs and just click ok/hit return when the dialog pops up. I don't do anything with the dialog outputs. In fact the vi that contains the open file dialog can be run before the project containing the bug is even open.
I have to do this everytime I turn the PC on.
So, either
1) Can somewone suggest a fix for the original bug?
2) What is the easiest way to simulate the enter keypress when the open file dialog pops up
or
3) Can someone tell me what the open file dialog does under the hood that somehow causes the dll to work and can it be simulated in straight LabVIEW
I suspect that the dll itself is dodgy ( I have in the past talked to the supplier but not got very far, and I will try again but I would like a quick, temporary solution too). I'm guessing that the file dialog is making some kind of check on the file, and possibly registering its presence with the OS (winXP). I tried using the file/folder exists vi to see if checking the file like that worked but no luck.
Any help greatly appreciated.
Dave

Hi David
I am very conscious about thread hijacking but this sounded like my issue so I hope you dont mind me asking about your issue. I am hoping that you have a spectrometer from the same vendor as me and its not just me seeing an Error 1097 issue. My spectrometer is from a company called Stellarnet.
So far I have unable to get it to work with other VIs. There is one condition where I can get it to work but its no good for me.
Case 1
I open the VI in a fresh labview environment with no other VIs in memory. The code runs with no issue.
Case 2
Labview is not opened. I double click the spectrometer VI in windows explorer. The VI opens but it fails to run resulting in Error 1097. Personally, I dont see the difference between this and Case 1 above and yet it fails.
Case 3
If I already have other VI's in memory and try to load the spectrometer VI and run it fails with Error 1097. This case is the one that most important to me. I have a test executive that will load test VIs dynamically and I can't get this to work. Same problem Error 1097.
I wanted to share what I have seen with you and to let you know that maybe somebody else has the same issue. I am convinced its the DLL but the vendor dis-agreed saying it was LabVIEW. I couldn't convince him otherwise.
Thanks in advance
David

The Save as PDF option in the Printer dialog is not supported.

My client is asking me to save a separations PDF file. But whenever I save it to PDF, a this message pops out: The Save as PDF option in the Printer dialog is not supported. I'm using InDesign cs5 and Adobe PDF 9.0. I'm on Mac OS X 10.6.6.

What it says is correct, have a look at this post here.

NOOK Simple Touch says "Error Dialog: user not activated" whenever I try to open e-books?

I have had my Nook Simple Touch for about a year now, and I have been using Adobe Digital Editions without a problem. Now, all of the sudden, Barnes and Noble updated my software and I can't read any of my ADE books!! It just says "Error Dialog: User not activated" every time I click on them. I have looked at many other websites and I have tried plugging my nook in to my computer and reauthorizing it, reauthorizing my computer, deleting the digital editions file and .adobe-digital-editions file, redownloading my books, turning my nook off and on, crying, and screaming. The weird thing is, in all the instructions, it says a pop-up box will come up when I delete the files, but it never does. Is that normal? I always have to do it manually by clicking on the gear. I even made sure I "unhid" all the hidden files. I HAVE DONE EACH OF THESE AT LEAST 5 TIMES AND THEY NEVER WORK!!! HELP ME, PLEASE.
Also, a lot of the websites say to make sure your Barnes and Noble ADE I.D. is the same as the one on your ADE computer I.D.. Is the B&N ADE I.D. different from just the Barnes and Noble ID? Becasue I have been using my sisters email for my computer ADE and my email for the B&N I.D.. Are they supposed to be the same? If so, how come I was able to use it without a problem before?? I tried reauthorizing ADE with my email, because I also have an ADE account with my email, but then it wouldn't let me redownload my books onto the new account. Does this mean I have to change the ADE computer I.D. and wait until my books are available again to read them? Is that the way to fix it? UGH!
Help is much appreciated.
P.S. I have ADE version 2.0

Just to clarify, there are two levels of Authorization -- one for the ADE software and one for the nook. You have to use your Adobe account to authorize both (and they have to be authorized with the same user name). It sounded like your original problem (Kcoline) was with the Nook authorization, and it was the same problem the rest of us were having.
To get your files back, I suggest carefully reading over the "Activation and Authorization" section of the ADE help. It appears that ADE will automatically find your files but note the "Note" in quoted text below...
http://www.adobe.com/products/digitaleditions/help/
"After activation, any books, magazines, or other documents you previously bought with Adobe Acrobat® or Reader® software are migrated to Adobe Digital Editions. This is usually a relatively quick process. Adobe Digital Editions opens each item and reverifies its license to the user. If you don't have DRM-protected items, you don't need to be online during the migration. If you have a large number of items (for example, more than 100), then this process may take a while, but you will see a progress bar indicating the state of the migration as it proceeds.
Note: Items that you previously borrowed from a public library with Adobe Acrobat® or Reader® software are not migrated to Adobe Digital Editions. You need to return the library item and then borrow the item again with Digital Editions."
If it's not finding your files, it may be because they're located in a folder different from the one that ADE is trying to use to find them.
You may also want to check the "Transferring items between computers" section, as this describes where the files should be located, and how to reimport them into your library.
Good luck!

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content)

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content) is there a fix to this problem? using 8.1, Monitor is a high res.2560x1440.

Another View.
the GUI is so hard to read (so small) I enlarge my Ps UI by the instructions below...which helped a lot.

Error message on reading device saying error dialog user not activated

error message on reading device saying error dialog user not activated. unable to open book to read

I had Adobe upgraded to from 1.2. to 4.1 on my Glow Light Nock at Barnes and Noble yesterday. I use a MacBook Pro 2011 upgraded to 10.10.1. I have never had a problem download a book from the library to my nook in the past. By the time I get this issue resolved, my 2 week book will be overdue and my book club discussion 1/21. I have been to the genius bar at Apple store--not their problem. Two trips to B&N and
the tech guy said he could fix the problem on a PC but not a Mac. It is not a Mac or Nook world.

Save as PDF and Save PDF as PostScript options in the Printer dialog are not supported.

I downloaded Indesign CS3 trial and liked everything about it until I attempted to print to postscript and got that message. Nothing I have tried has helped. I have seen in various forums that others are having the same problem, but haven't found any solution offered. I am running Tiger 10.4.10 on a new Intel Imac with 3G ram. This is a procedure I use very often in my workflow, and have never had this problem with CS2 on my PC or other Macs. Is there a solution? I downloaded the .1 update and installed that and it didn't change anything.

PLEASE SOMEONE HELP ME.
Its the first time Im using print booklet option to save my file. I have the same problem when trying to save as pdf and get the
"The Save as PDF and Save PDF as PostScript options in the Printer dialog are not supported."
I'm trying to save a .pdf of a booklet of a facing pages document of A4 size each facing page for a whole size A3, then hope to let the pages be correctly arranged by inDesing, then print and staple.
Meaning pages will be like this - Page #60 left side [of the A3] - page #1 right side [of the A3] , page # 2 right side[of the A3] - page #59 left side[of the A3] etc...
I CANT DO IT. I tried to follow Melvin Thompson , but when I choose save .ps and open it in preview all I see is independent a4 pages and just the left ones , .. How can I save my file as .pdf ready to be printed in a3 ?
I really appreciate any help.

BUG: "Save As" dialog is not showing

sometimes i have the problem (since CC) that the SAVE AS dialog is not showing.
the window does not show when i select SAVE AS.
SAVE works.. but i often want to save a new version without overwriting the old.
i don´t know why it happens but it seems that BIG files (panoramas or many layers) are affected more often.
happens 3-5 times a week.
never had this problem with PS prior to CC.
my system:
intel I7 2600K
16 GB ram
GTX 770 (latest drivers)
240 GB SSD (OS windows 7 64 bit)
120 GB SSD (60GB free for scratch files)
2 TB harddisk (1 TB free for scratch files)

Photoshop should not crash even with big files so apparently there is something wrong.
yeah obviously...
Have you tried resetting Photoshop's preferences yet? That sometimes cures malfunctions.
i have resetted the preferences yes.
photoshop should not crash i agree.... but as you can read here in this forum it does.
no software is free of bugs.... and i have worked long enough with computers to burry that expectation.

File Save Dialog does not show web folders

Hi.
My system is SAP ECC 6.0. From custom abap program, I need to be able to navigate to a sharepoint folder and save a file to it. I call METHOD cl_gui_frontend_services=>file_save_dialog for this. I have already mapped/added the SharePoint site (ex. http://abc/xyz/) to My Network Places. However, when I run my program, the File Save Dialog does not show the web folders in the said sharepoint site. Any clue to what I'm missing here? In WiinExplorer, I have no issue navigating/accessing the web folders.
Thanks in advance.

project manager
um, yeah.
Should not need the project manager simply to see new files added to a directory in a Open/Save dialog window since last opening the app.
I did a scan, a extended scan, opened all the little turn down arrows of the
full path to the directory I knew there to be the new files and yes, Logic
shows them there in the "Project manager".
BUT Logic still does not show the files in the Open/Save dialog windows.
This is strange because even simple app like TextEdit can show
new files in it's Open/Save dialog function windows without the need of
a project manager.
I have to quit and re-launch each time to see any new files?

I am running Windows 7 Professional. When I try to install Flashplayer, I get to step 3, and then the installation will not proceed any further. A blank dialog box appears, with Adobe Flash Player Installer in the upper left corner. I have tried to ins

I am running Windows 7 Professional. When I try to install Flashplayer, I get to step 3, and then the installaion will not proceed any further. A blank dialog box appears, with Adobe Flash Player Installer in the upper left corner. I have tried to install on Explorer, Firefox, and Chrome. Nothing works. Please help.
Thanks/ Scott

1. Restart your computer to stop any Adobe process that is running.
2. Click on the following Adobe link. Go to the bottom where it says "Still having problems?". Click on the version of Flash Player for your browser.
Installation problems | Flash Player | Windows

Purchase Order Workflow - dialog step not receiving terminating event

Hi,
We have a scenario wherein based on the release groups and release strategies, different peope need to release the PO's.
I have been able to develop the workflow for this successfully, but here is where I am facing an issue.
After the PO has been created, based on the release group and strategy, it gets routed to the appropriate 1st approver. On their approval, the PO gets routed to the 2nd approver. Once the 2nd approver approves, the dialog step doesnt get completed and is still waiting for the terminating event. Event trace shows that the event is getting published, but there is no workitem to receive the terminating event. I am not sure why this is occuring for only 2nd approver onwards whereas for the 1st approver, the terminating event is received by the workitem.
I am using start conditions for my workflow to ensure only 1 instance of the workflow is triggered for a rel groups and rel strategy and release code, else I am multiple instances each time an approver approves the PO. I am not sure if the start conditions are causing this issue with the terminating events not being received with the workitems.
Any assistance is welcome.
Thank you,
Satish

From the information provoided it seems you are using PO that is subjected to Release of PO for multiple Release Code and each Release Code Release is being done by one approver. If that is the case then I think the Terminating event should get caught. Please check whether the Terminating event that is getting triggered is specific to the Release Code or not.
Thanks
Arghadip

New "Targets and Devices..." dialog does not open in Project window

Hi I am trying to add an FPGA device in my project, however when I right click on Project, and go to New -> Targets and Devices...It appears as though it is busy (the mouse icon becomes the hourglass) and after while it just goes back to normal and nothing seems to happen. I have an FPGA device installed which is the RIO card PXI-7831R, and the devices seems to be working fine. When opening a project that already contains it as a device, it is displayed fine. Its just the dialog to add new devices and targets does not appear. I have tried Repairing NI Labview 8.0 and NI Labview FPGA Module, but the problem still exists. I would appreciate if anyone has any idea as to why this is happening and how to resolve it. Thanks!

Hi Kewsvnet
So you have tried the device on another machine and it works fine, is it only on a specific machine that this issue is occuring on? I think I misunderstood the issue yesterday, am I right in understanding that when you click on 'New Devices and Targets' absoloutely nothing happens apart from the 'hour-glass' appearing for a while? If this is the case it maybe the case that LabVIEW may have become corrupted in some manner. Repairing it will not solve an issue like this. What you should try is to force LabVIEW to create a new .ini file, which holds all the configuration settings. To do this you need to rename the .ini file so that when LabVIEW starts it will detect no .ini file an create a new one.
The .ini file can be located via C:\Program Files\National Instruments\LabVIEW 8.0\ LabVIEW Configuration Settings (it is a file size in the range of 2Kb - 10Kb)
You need to rename this file 'LabVIEW Backup', then attempt to restart LabVIEW and a new project and try to add a target.
Let me know how you get on
Kindest Regards
YatinM
Applications Engineer
NIUK & Ireland

KDE open file dialog does not honor the global double click setting

I have checked both in system settings and in the file
$HOME/.kde/share/config/kdeglobals
to make sure the singleclick is set to false. Still in the open/save dialog the files are selected and opened in a single click.
This bug is not seen in chakra linux (which now has kde 4.8.2).
Anyone can confirm this?
Last edited by tzhang37 (2012-04-20 16:38:37)

It works for me.

Accessing the Open dialog causes RoboHelp to hang and eventually crash.

Whenever I attempt to take an action that requires the Windows "open" dialog, RoboHelp starts to hang and eventually crashes.
My only thought: I've seen other .NET applications have issues like this where the framework steals window focus from the Windows dialog. Could this be happening here?
Has anyone ever seen anything like this? Any ideas?
Many thanks!

Does the dialog even make an appearance? Or does it behave as if the dialog is there but unseen?
If the former, I'd say I smell a bug somewhere. But if it's the latter, try pressing and holding your Windows key on the keyboard. Then press the left arrow key a couple of times. Under some conditions dialogs will appear but be out of the viewable space. If that has happened, that key combination should coax the window back into the viewable area.
Cheers... Rick

ADF Faces: dialog framework calls twice prepareModel and prepareRender

Hi ,
does anybody know why ADF Faces dialog framework calls twice prepareModel and prepareRender lifecycle methods . That's a really problem for me because i'm calling db procedures through backing beans methods which are attached on components properties.
I cannot allow myself to cal the procedures more than once.
Can somebody help me?
Krasi

Okay, although the servlet doesn't require to be run inside the JSF context, I added "/faces" to the URL simply because this would allow me to query the "postback" flag. In other words, I changed the invocation URL from "/jrrun" to "/faces/jrrun".
In the servlet's "service()" method I put:
logger.debug(">>>>>> isPostBack? " + AdfFacesContext.getCurrentInstance().isPostback());
I also attached a JSF PhaseListener to the whole thing.
Then I opened the parent page, I clicked on the button and the dialog appeared. The console output follows:
07/01/19 21:37:05 ------------- start of phase RESTORE_VIEW 1
07/01/19 21:37:05 ------------- end of phase RESTORE_VIEW 1
07/01/19 21:37:05 ------------- start of phase RENDER_RESPONSE 6
2007-01-19 21:37:05,156 - DEBUG - >>>>>> RunJasperReport: beginning
2007-01-19 21:37:05,156 - DEBUG - >>>>>> isPostBack? false
2007-01-19 21:37:05,156 - DEBUG - >>>>>> RunJasperReport: repPath=/reports/newRegByBusType_Report.jasper
2007-01-19 21:37:07,047 - DEBUG - >>>>>> RunJasperReport: report output (PDF) was generated successfully. Its total size is 59596 bytes.
2007-01-19 21:37:07,047 - DEBUG - >>>>>> RunJasperReport: done
07/01/19 21:37:07 ------------- end of phase RENDER_RESPONSE 6
07/01/19 21:37:09 ------------- start of phase RESTORE_VIEW 1
07/01/19 21:37:09 ------------- end of phase RESTORE_VIEW 1
07/01/19 21:37:09 ------------- start of phase RENDER_RESPONSE 6
2007-01-19 21:37:09,625 - DEBUG - >>>>>> RunJasperReport: beginning
2007-01-19 21:37:09,625 - DEBUG - >>>>>> isPostBack? false
2007-01-19 21:37:09,625 - DEBUG - >>>>>> RunJasperReport: repPath=/reports/newRegByBusType_Report.jasper
2007-01-19 21:37:09,672 - DEBUG - >>>>>> RunJasperReport: report output (PDF) was generated successfully. Its total size is 59596 bytes.
2007-01-19 21:37:09,688 - DEBUG - >>>>>> RunJasperReport: done
07/01/19 21:37:09 ------------- end of phase RENDER_RESPONSE 6
By the way, partialSubmit="true" has the same effect as partialSubmit="false".
I'm not sure I understand you correctly. Or perhaps you don't understand me correctly.
I haven't got a problem with the parent page. I have a problem with the dialog page. It's executed twice. The RENDER_RESPONSE phase (as well as the RESTORE_VIEW phase) is executed twice.
I want it to be executed only once. I don't want the servlet to be executed twice.
Let me point out again that in the Embedded OC4J (inside JDeveloper) everything is okay. The servlet is executed only once. However, the same thing on OAS 10.1.3.1 runs twice.

TPM BIOS Dialog Asks To Clear TPM - Dialog is not touch sensitive and will not proceed

Similar Messages

Maybe you are looking for