TPM - can't create agreements - missing services?

Hi Gurus,
We can't create TPM agreements in our QA system as the agreement view freezes when you have selected an account type.
OSS note 1340528 is implemented in our system and we think that we need to activate some services.
Anyone having some experience with this
Kind regards
Anne

We have found the missing services that must be activated.
BSP_CRM_BTFBSE
Kind regards
Anne

Similar Messages

Can I create a second service console in ESX 2.5.5?

Can I create a second service console in ESX 2.5.5?
Yes, I've done it in ESX 3.+, but I can't find/verify it's ok in ESX 2.5.
Any procedures, commands or comments welcomed.
ALL POINTS WILL BE AWARDED.

No you cannot - The service console in ESX 2.x actuallys loads before the vmkernel and has control over its own physical NIC and memory - In esx 3.x (vSphere) the VMkernel loads first and provides those resources to the service console allowing you to create multiple service console ports -
If you find this or any other answer useful please consider awarding points by marking the answer correct or helpful

How can I create a web Service from my Web Dynpro Application ?

Hi,
Kindly let me know How I could create a "Web Service" with my Web Dynpro DC project.
Awaiting your responses.
Regards,
Mahesh

Hi Mahesh,
You can use the web services by creating the Model in web Dynpro
And if you want to publish your own web service then you have to create a EJB module and publish as a web service.
Thanks
Ninad

Can I create a "UPSERT" Service which calls 2 services without using BPM ??

Hi all,
I'm on PI 7.10 and have the following problem.
I want to Upsert (Update or Insert) an Account into a 3rd Party System.
The third party system does not have one web service that does this, instead it has
Update -> Will update an existing account (but will not create it if it's not there)
Create -> Will create a new account (but will not update it if it is there).
I have created a generic Service Interface (abstract, synchronous).
I have created two operation mappings (create, update).
I want to
Call the update service
If it succeeds
respond with success
Else (if it fails)
   Call create service
   If it succeeds
      respond with success
   else
    respond with failure.
I ideally want to do this without using a BPM and was thinking there may be a way to call multiple operations sequentially.
Can you do this by
Mutliple operation in the Service Interface?
Multiple operations in the Operation Mapping?
Is there another way without using a BPM?
Ideally I'm looking for a link to an article or help documentation describing how to do this.
Thanks in advance for your help.
Regards,
John

I think BPM will be required in this case.
Your requirement is to perform Insert OR Update.....insert and update actions depending on result of each other.
first send a Insert request to the target system and get back the response...depending on the response decide if the record was inserted or if there is a record already present and if present then send a Update request from the BPM.
Check how your webservice responds back....you mentioned that SUccess or Failure is to be communicated....from where should this be send...is the WS sending it or should PI send it?
Other way would be to make use SOAP lookup and perform valiudation in Mapping based on response of the lookup.
I am doubtful if Multiple Operations will help you in getting this requirement done.
Regards,
Abhishek.

How can I create a generic service by emcli

Hi,
I have a generic service associated with a simple jdbc test and wanna create similar items by emcli.
I tried to create a generic service by
emcli create_service -name="xxx" -type="generic_service" -availType="test" -availOp="or" -timezone_region="+1" -beacons="yyyy"
But it return "Error:No key tests associated with target xxx"
Can anyone help on this?
Thanks.

Hi,
refer to the below How to document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b68b99-022e-2a10-999d-c4dc9ec24a59
Assign points if useful
Regards
Venkata Devaraj

Can we create a Web Service from a Business Object??

Hello All,
Has anyone created a Web Service using a Business Object?
When I am trying to create a Web Service in TM box, I can see that couple of options like Business Objects, Process Agents are disabled and rest like Consumer Group, Service Provider are enabled. Any idea why this is happening. Is this related to some configuration setting.
Regards,
Abhishek

please elaborate in which environment or case you are creating Web Service from Business Object.As per my understanding we generally create web service through Wizard.
Thanks
Snehasish

Can not create a mobile Service RDFE: The upstream server reported that the resource was not found.

Hi,
I am trying to create a mobile service and no matter what I do I receive the attached error:
RDFE: The upstream server reported that the resource was not found.
What does this error mean and how do I resolve it.
I have created mobil services on this account a few days ago.. I deleted most of my azure resources and I am not sue I deleted one that is required for this

Thanks for reporting this problem. The Mobile Service team is looking into this, and we believe that we identified the issue. We are working on a fix now. I'll let you know when we've resolved the issue.

Can I create a call service database in Sharepoint

Hi there,
I'm having a bit of trouble working out where in Sharepoint I can create a database for keeping track of calls for the IT help desk.
Should I go through Sharepoint CRM and then follow the Microsoft Dynamics CRM wizard?
I guess basically what I'm asking is which module of Sharepoint provides similar functionality to Microsoft Access, if any?
thanks,
J

Check Access Web Database site templates in SharePoint 2010.
Creating Web Databases with Access 2010 and Access Services
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

How can I create a Web Service with several classes

Hello,
I developed an API which I want to use to create a webService that offer an acces to all the classes and use all their methods.I tried this with Netbeans but I view that I will have a WSDL file for each class.
But I have tested the yahoo api web service of the image search and it offer acces to several objects such us request and result.So I want to make a service that offer the use of several objects. Can I do this.If yes how ? Because I have read tutorials about WebServices and they mention that to create a webservice I must have an EndPoint class so only one class.
Please I juste began with webservices so I don't know how to do.
Thanks in advance.

I don't believe this is possible when starting from Java. I think you need to start with a WSDL to get this to work. I am curious as to why having multiple WSDLs is an issue, would you care to eloborate.
Thanks

I can not create a JCA Service (Request / Response)

Hi
I need to generate a JCA Service (Request / Response) to call a MBF that exists in JDE.
I install Oracle Applications Adapters 11.1.1.3.0 in Oracle SOA Suite 11.1.1.4.0 and follow the Installation Guide and User Guide for applications adapters.
I can view the Business Functions that I packaged with Genjava but when I try to Generate a JCA Service (Request / Response) does not generate the expected files.
The machine on which I have installed the adapters is different from the machine where it was installed JDE
The first warning message appears when i connect to the target:
ADVERTENCIA: Unable to successfully register object with name 'jde:instanceName=*unknown.syworksoa*,metricName=jdenet_connection_manager,metricType=runtime.
javax.management.RuntimeMBeanException: RuntimeException thrown in preRegister method
Note: sywork-soa is the machine on which I have installed the adapters.
The second message appears when i try to generate the JCA Service from a MFB in application explorer.
java.lang.NullPointerException
at java.io.StringReader.<init>(StringReader.java:33)
at com.iwaysoftware.af.container.tools.wsdl.oracle.WSDLGenerator.getType
Definition(WSDLGenerator.java:546)
at com.iwaysoftware.af.container.tools.wsdl.oracle.WSDLGenerator.addRequ
estResponseElements(WSDLGenerator.java:220)
at com.iwaysoftware.af.container.tools.wsdl.oracle.WSDLGenerator.createW
SDL(WSDLGenerator.java:275)
at com.iwaysoftware.af.container.tools.wsdl.oracle.WSDLGenerator.getWSDL
Document(WSDLGenerator.java:199)
at com.iwaysoftware.af.container.tools.wsdl.oracle.IWayWSILBrowser.gener
ateIWayWSDL(IWayWSILBrowser.java:130)
at com.iwaysoftware.af.container.OracleAEManager.generateWSDL(OracleAEMa
nager.java:83)
at com.iwaysoftware.af.container.OracleAEManager.generateWSDL(OracleAEMa
nager.java:64)
at com.iwaysoftware.af.container.ae.AEComponentMessage.buildEXPORTWSDL(A
EComponentMessage.java:182)
at com.iwaysoftware.af.container.ae.AEComponentMessage.build(AEComponent
Message.java:86)
at com.iwaysoftware.af.container.ae.AEComponentMessage.<init>(AEComponen
tMessage.java:58)
at com.iwaysoftware.af.container.AEManager.dispatch(AEManager.java:134)
at com.iwaysoftware.af.container.IWAFContainer.dispatchAERequest(IWAFCon
tainer.java:809)
at com.ibi.afjca.cci.IWAFInteraction.execIWAE(IWAFInteraction.java:279)
at com.ibi.afjca.cci.IWAFInteraction.exec(IWAFInteraction.java:164)
at com.ibi.afjca.cci.IWAFInteraction.execute(IWAFInteraction.java:98)
at com.iwaysoftware.iwae.common.JCATransport.execute(JCATransport.java:1
66)
at com.iwaysoftware.iwae.common.AdapterClient.generateWSDL(AdapterClient
.java:437)
at com.ibi.bse.gui.ExportWSDLDialog.saveWSDL(ExportWSDLDialog.java:502)
at com.ibi.bse.gui.ExportWSDLDialog.okButtonActionPerformed(ExportWSDLDi
alog.java:416)
at com.ibi.bse.gui.ExportWSDLDialog.access$000(ExportWSDLDialog.java:29)
at com.ibi.bse.gui.ExportWSDLDialog$2.actionPerformed(ExportWSDLDialog.j
ava:387)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:19
95)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.jav
a:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel
.java:387)
any help you can give me I am very grateful
Carlos Andres Gonzalez.

I have tried to create an account via ePrintCenter and it seems that the published application has several flaws in interpreting the provided input.
1) In the Filed for last Name I enter my last name, which consist of only Alph Characters. The form however thinks that there is some sort of special character and rejects my Input.
2) E-Mail address. is not identical; OK, so I do a quick OCR on the E-Mail and guess what they are identical. Again the form Fails to recognize this.
3) Enter a password (2 Fields) and a third is displayed which is marked as "*required" but is not labeled as to what the required info could possibly be. Or is it a 3 password confirmation box, who knows.
All I know is that a simple registration is a major pain with this HP site.
Any Help as to how to alleviate this would of course be greatly appreciated.

Can't create a new service for thunderbolt/ethernet in 10.10

First, I'm not sure how long this has been going on since I generally have WiFi on in addition to a Ethernet connection if I'm on the LAN (wire). Second, I've got a new system board in the machine from about 3 weeks ago replaced by Apple via Apple Certified Vendor. All done from Genius Counter. Third, whether a router or switch in my network, the MacBook Pro Thunderbolt/Ethernet can't see past its own port. That said, the transmit and send lights on the router or switch for the MBP are happily blinking away as a Gb connection with all the other connections. I'm stuck back at the MBP as the culprit as of right now. I've moved from the switch to the router, changed cables, deleted the offending services (which is why I was adding them back). Pings to the gateway, router, and switch with no reply's (didn't expect any).
Note, I'm running 10.10.3, all network equipment is Netgear except the router which is Arris (Comcast).
Any ideas would be appreciated...

This can be achieved with a mail-merge type script.

Can't create EO from services (JDev 11g Preview 3)

In JDeveloper 11g Tech Preview 3, I am unable to create an Entity Object from a service that I selected (with WSDL) in UDDI registry (Oracle AS 10g registry) using the EO creation wizard. After selecting the service and returning to the EO creation wizard, I clicked next or Finish and nothing happens. Any ideas? Thanks!!

Hi,
this bug 6611406, which is fixed in a later version than TP3
Frank

Can I create User profile service sync connection for my site without Active directory?

Hi everyone,
Is it possible to use my site without active directory? our AD policy don't allow farm account to have "Replicating directory changes", If I export AD information to SQL and sync profile from SQL is it possible?
Thanks
TanaponP

Yes, you can use mysites without setting up user profile sync. But you won't be able to sync information from SQL without having a primary sync setup with AD first. Syncing to something like SQL is designed to augment existing profiles. It
won't create new ones.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

How can I create music streaming service using azure media services?

Hi, I'm still new to azure, after doing some research and testing, I found out that Azure don't support music streaming where mp3 song uploaded weren't supported.
Just wondering, is it true or is there any ways that I can deploy music streaming service something like spotify do but not that advance? I'm trying on a school based project. Thanks for the guides and I really appreciate it!

It really depends on what you mean in your case by "Streaming". Is there a specific streaming protocol that you are looking to support? Remember that "streaming" is different from just progressive download of a file from a
web server. If you are looking to just "download and play" an mp3 file, blob storage works just fine. If you have a requirement for an actual streaming protocol like MPEG-DASH, or Apple HLS, then Azure Media Services can help.
If you are streaming content to an iOS device that is longer than 5 minutes in duration, Apple prefers that you use their HLS protocol. It can handle audio only streams.
For streaming in Azure Media Services, you can encode you media into a single MP4 audio file and then request the Streamig URL to play it back in either HLS or MPEG-DASH format depending on which client you are targeting.
To play it back in MPEG-DASH, use the latest DASH.js player.

How to create a web services with Developer Studio?

hi all,
I would like to know how can I create a Web Services with Developer Studio 7.0, but a try because I could not publish it to consume.
thanks!

Thanks for your answers
Web Services try when I get the following error:
http://img386.imageshack.us/my.php?image=errorms9.jpg
<--Localization failed: ResourceBundle='com.sap.caf.rt.resources.CAFExceptionResources',
ID='MMR_BO_NOTFOUND', Arguments: ['Prueba2Service']-->
I do not know what the cause of error
thanks

TPM - can't create agreements - missing services?

Similar Messages

Maybe you are looking for