TPM_MIGRATION No position exists for the selected criteria Msg no. TRQ0020

Hello Experts.
I'm facing a error when execute the STEP B06 in TPM_MIGRATION Transaction, the message was:
No position exists for the selected criteria
Message no. TRQ0020
Diagnosis
This is the position that is characterized by the following details:
CC=1020;PT=V4I;SA=DEPBCCR;SE=1000013
When I look the Security ID number in the old system, the Document is obsolete, but the migration transaction seek the FLOW information for this ID number and not return any information.
Thanks for you help.
Regards.
Edited by: k3n_rao on Mar 31, 2011 7:32 PM

Hi Lorenz,
Thank you very much for the answer, My colleague, the one who posted the threat is not longer available, he went on hollydays.
We did check TPM12 & TPM13 and the reports said:
TPM12 : "no positions selected"
TPM13: "No flows found"
Just to double check that we have understood, which "Migration date" are you reffering to?
thank you very much
best regards,

Similar Messages

DB14 Backup - No logs exist for the selection criteria for system DEV

Hello Expert,
When i click on BRBACKUP button Its showing the info message "No logs exist for the selection criteria for system" .
so please suggest me where i need to maintain the selection criteria.
Thanks & Regards
Annasaheb

Hi Anna,
As told by Markus and Eric above...
you never made a backup on you new installed system....then how system will show you backup details(which were not happened in real)
Why you are searching for money in an empty pot
Regards
Nick Loy

No entries exist for the selection-FTR_EDIT

Hi Experts,
I created treasury deal in FTR_CREATE, after save the deal systems is prompting Message express document update terminated User Name so and so, after enter Deal is Created in Company Code. But when I check the deal no in FTR_EDIT system is prompting message "No entries exist for the selection", I checked in table VTBFHA also there also deal no is not showing, if try to create Deal again system is taking next available No for the deal. Please share some ideas if you face same kind of issue.
Thanks & Regards,
AIM

Hi Feng,
Thanks for your reply.I tried that one also even though i am not able to reslove, please suggest any other solution.
Thanks & Regards,
AIM

Error - no elements exist for the selection - RSMIPROACT

Hi Experts,
We have an issue with the program RSMIPROACT to send requirement to SNC. We have an error "No elements exist for the selection" once execute the program with input parameters.
Could you please help me out if anything missing or cause of the error.
Regards
Gowri Sankar

Hi Gowri,
if the MRP areas are inactive, note 1627486 could help, please verify...
Regards,
Mauro

WIP Assy Completion -The onhand qty is zero for the selection criteria ente

Hi,
I am trying to do a Work Order-Less completions with Transaction Type as 'WIP Assy Completion', the assembly items are not serial and lot controlled.
When i am trying to save it, it throws an error as 'The onhand qty is zero for the selection criteria entered'.
Please suggest.
Thanks

Do you have onhand quantity for the components under that assembly?
Thanks
Nagamohan

Enhance the selection criteria of COOIS

Hi Experts,
My role is Basis, I have a problem with tcode COOIS. Users normally execute the COOIS and not enter the sensible selection criteria. It make very high system performance during run and use more than 70% of SAP paging after finished. Normally SAP performance is good enough, I cant imagine if user execute COOIS more than 1 session. They're also not accept to execute in background due to their existing operation design but only thing I can thinking now is make more restriction for the selection criteria.
Pls suggest me ur best practise that, How can I hide or lock the unneccessary selection criteria in COOIS? And set the default variant for everytime user run tcode COOIS or else that can enhance the COOIS.
Regards,
Piyapong C.

Hi
Piyapong using variants we can solve this problem.In the initial screen enter the selection parameters as per your requirements after that save that variant.After that when you run the COOIS again,run with this variant.
In this you can protect the field,hide the field and you can make the field as required field(mandatory entry).
Regards,
Raj.

User exit/BADI required for coding for the selection custom fields in RSA3

Hi,
I have a requirement in the Datasource extractor. I need to add custom Z fields in the Data souce of the 2LIS_02_SCL and need to include in the selection part. So I have added the custom filed in the append structure and include the check in the selection checkbox in the transaction LBWE under the datasource specified above. For the corresponding custom fields, to be populated in the ALV list, I have written the code in corresponding user exit ZXRSAU01.
Now I can view my custom Z fields in the list as well as on the selection fileds while executing the transaction RSA3. But I need to write code for the selection criteria part. On entering value in the selection criteria of my custom z field, no values are selected to the corresponding query. Please let me know where should i write the coding part for the selection criteria of the Z fields for the Datasource.
On debugging, to my understanding only the standard fields are alone getting filtered by providnig the values in the selection part of the RSA3 tcode. It is called in Macros : Sel < Datasorce> .... and the fetch cursor is included inside the macros.
Please let me know any user exits or Badi;s available for it.
Thanks in advance

Hi shivu,
you might try the BAdI RSU5_SAPI_BADI. A good introduction can be found in the following document:
[Enhancing DataSources with BAdI RSU5_SAPI_BADI|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/3001894b-b1fb-2910-77ba-e80b6f2053b7]
The BAdI is called at the time of extraction, so this would be the right place to populate your additional fields.
Best,
Chris

WHT - No unpaid tax lines exist for the given selection criteria

Before going to execute Create remittance challan J!INCHLN ,
i entered all the mentioned parameters and try to save but i got error message as follows
No unpaid tax lines exist for the given selection criteria.
Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updating. Check the entries.
Procedure
Check entries in table WITH_ITEM for the open tax items chosen for clearing.

Hi,
Please check for
1. Section code/ Business place updated even in the tax lines of the document and not just the vendor line item.
2. Check if there is a buzei mismatch between with_item table entries and bseg entries for the documents that are being pulled during the challan creation. If there is a Buzei mismatch, then please run the program in the note :885213 and then rerun the challan .
3. Please check the note :1465529 . This is the consulting note for j1inchln.
Hope this helps.
Thank You.
Regards,
Anushya

No unpaid tax lines exist for the given selection criteria while+J1inchln

Hi All,
While doing J1inchln I am getting following error.
No unpaid tax lines exist for the given selection criteria.
Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
Procedure
check entries in table WITH_ITEM for the open tax items chosen for clearing.I have already updated Business Place and Section code while doing FB60.But still I am getting the same error.
I have already updated Business Place and Section code in the entry while doing FB60 but error is coming. Please advise.
Regards,
Abhinav Sharma

Hi ,
Kindly go through the note no. 1465529 , which is a consulting note on J1INCHLN .
It would resolve your query .
Regards ,
Dewang T

No unpaid tax lines exist for the given selection criteria.

Hi
at the time of remittance challan,getting following error:
No unpaid tax lines exist for the given selection criteria.
Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
Procedure
check entries in table WITH_ITEM for the open tax items chosen for clearing.

Hi,
It may cleared Manual posting at the time of posting. If manual clear postings reverse and do through J1INCHLN only.
and check the Date range for selection criteria.
Regards,
Kishore

Payment run error "No check exists which meets the selection criteria"

I have done a payment run successfully, maintained a variant for the check print program but when I want to display the cheques i get this error: " No check exists which meets the selection criteria"
I have mantained the check lot for the house bank and the ID as well.
What could be the problem? Please help.
Regards
Debra

Hi
I have checked FBZP t. code and the check lots , all seem to be in order. I still have not found out where the problem is.
Thanks Shammi
Regards
Debra

Org unit is not getting defaulted for the selected position in infotype0001

Org unit is not getting defaulted for the selected position in infotype 0001 during the hiring action.
In OM Org. units and positions have been created.
The Org. unit to Position relationship is also created.
But inspite of this, In infotype 0001, the after selecting a position, the Org unit is still getting defaulted to "00000000" instead of the Org. unit Id to which the position belongs. (Please note: At the time of selecting the position, I do structure search and the position is shown under the correct Or. unit)
Have I missed any step?

Have u run the RHINTE programmes properly ?
are u able to save the record?
As some times it may be display probolem, if u r able to save the record then check the relationship in pp10/po13.
and U have not answered what Mr. Valeri is asking about your Implementation/support because these type we come accress if data is not uploaded properly.
Regards
vinmax

Hide the selection criteria for EA21 transaction

hi,
Good day guys
Hope every one is doing well. I need to hide the selction criteria for EA21 Transaction code. Plz let me know how to do it with out disturbing the standard code?
Regards
KK

Hello,
If they are not mandatory for the selection you can just hide them using Transaction Variant (SHD0). See Online sap help for transaction variant.
Regards,
Karthik D

How to populate the ranges using FM for the SELECTs

Hi,
I am still working on the FM to create a generic extractor. I went through the debugger but I am still unable to determine how the ranges are populated. RSA3 always gives me zero values for the results.
There is a RANGE statement in the sample FM and the following statements for SELECTs
RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
          L_R_CONNID FOR SFLIGHT-CONNID.
and...
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CARRID'.
        MOVE-CORRESPONDING L_S_SELECT TO L_R_CARRID.
        APPEND L_R_CARRID.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CONNID'.
        MOVE-CORRESPONDING L_S_SELECT TO L_R_CONNID.
        APPEND L_R_CONNID.
      ENDLOOP.
My question is how is L_R_CONNID and L_R_CARRID populated with low and high values for the SELECT statements? I tried to find the DS 0SAPI_SFLIGHT_SIMPLE to run and see how it is set up but there is no such DS.
Would someone take the time to say something about this in several sentences? I have my own code and it seems that it is not populating the values for the SELECTs when I debug from RSA3 when I provide the low and high values.
Would I normally populate the low and high values from the InfoPackage 'Data Selection' tab once I have implemented in BW or ready to test in BW? That would mean I have to choose those fields as selections from RSO2. Anyway, I think I have asked about this but I am hoping to get an answer to get this going...
Appreciate any replies.

Hi
Here is an example of an extractor that uses
both method's, if the InfoPackage selection exist's
it overrides the TVARV selection (which is the default).
FUNCTION ZBW_TC_FORECAST_SO_EXTRACTOR.
""Local interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*"     VALUE(I_CHABASNM) TYPE SBIWA_S_INTERFACE-CHABASNM OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG OPTIONAL
*"     VALUE(I_UPDMODE) TYPE SBIWA_S_INTERFACE-UPDMODE OPTIONAL
*"     VALUE(I_DATAPAKID) TYPE SBIWA_S_INTERFACE-DATAPAKID OPTIONAL
*"     VALUE(I_PRIVATE_MODE) OPTIONAL
*"     VALUE(I_CALLMODE) TYPE ROARCHD200-CALLMODE OPTIONAL
*" TABLES
*"      I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE ZBW_TC_FORECASTING_EXT_STR OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
*"      HIERARCHY_NOT_FOUND
Change History                                                      *
Mod. # | Date    | Developer     | Description                  *
*RD3K915762|06/21/2005| SRangaraj      | Change selection of open SO   *
         |          |                | data to include deleted matls *
         |          |                | and obsolete items too        *
RD3K915888|06/29/2005| SRANGARAJ      | Add ext matl grp and lab offce
         |          |                | filters for data-selection    *
The input parameter I_DATAPAKID is not supported yet !
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SBIWA_S_SELECT.
Maximum number of lines for DB table
STATICS L_MAXSIZE TYPE SBIWA_S_INTERFACE-MAXSIZE.
Parameter I_PRIVATE_MODE:
Some applications might want to use this function module for other
purposes as well (e.g. data supply for OLTP reporting tools). If the
processing logic has to be different in this case, use the optional
parameter I_PRIVATE_MODE (not supplied by BIW !) to distinguish
between BIW calls (I_PRIVATE_MODE = SPACE) and other calls
(I_PRIVATE_MODE = X).
If the message handling has to be different as well, define Your own
messaging macro which interprets parameter I_PRIVATE_MODE. When
called by BIW, it should use the LOG_WRITE macro, otherwise do what
You want.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
The input parameter I_DATAPAKID is not supported yet !
Invalid second initialization call -> error exit
    IF NOT G_FLAG_INTERFACE_INITIALIZED IS INITIAL.
      IF 1 = 2. MESSAGE E008(R3). ENDIF.
      LOG_WRITE 'E'                    "message type
                'R3'                   "message class
                '008'                  "message number
                ' '                    "message variable 1
                ' '.                   "message variable 2
      RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDIF.
Check InfoSource validity
    CASE I_DSOURCE.
      WHEN 'ZBW_TC_SO_EXTRACT'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE            "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
Check for supported update mode
   CASE I_UPDMODE.
     WHEN 'F'.
     WHEN OTHERS.
       IF 1 = 2. MESSAGE E011(R3). ENDIF.
       LOG_WRITE 'E'                  "message type
                 'R3'                 "message class
                 '011'                "message number
                 I_UPDMODE            "message variable 1
                 ' '.                 "message variable 2
       RAISE ERROR_PASSED_TO_MESS_HANDLER.
   ENDCASE.
Check for obligatory selection criteria
   READ TABLE I_T_SELECT INTO L_S_SELECT WITH KEY FIELDNM = 'PGMID'.
   IF SY-SUBRC <> 0.
     IF 1 = 2. MESSAGE E010(R3). ENDIF.
     LOG_WRITE 'E'                    "message type
               'R3'                   "message class
               '010'                  "message number
               'PGMID'                "message variable 1
               ' '.                   "message variable 2
     RAISE ERROR_PASSED_TO_MESS_HANDLER.
   ENDIF.
    APPEND LINES OF I_T_SELECT TO G_T_SELECT.
Fill parameter buffer for data extraction calls
    G_S_INTERFACE-REQUNR    = I_REQUNR.
    G_S_INTERFACE-ISOURCE   = I_DSOURCE.
    G_S_INTERFACE-MAXSIZE   = I_MAXSIZE.
    G_S_INTERFACE-INITFLAG = I_INITFLAG.
    G_S_INTERFACE-UPDMODE   = I_UPDMODE.
    G_S_INTERFACE-DATAPAKID = I_DATAPAKID.
    G_FLAG_INTERFACE_INITIALIZED = SBIWA_C_FLAG_ON.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
    APPEND LINES OF I_T_FIELDS TO G_T_FIELDS.
Fill range tables for fixed InfoSources. In the case of generated
InfoSources, the usage of a dynamical SELECT statement might be
more reasonable. BIW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
    LOOP AT G_T_SELECT INTO L_S_SELECT.
      CASE L_S_SELECT-FIELDNM.
        WHEN 'PRDHA'.
          WGF_PRDHA_LENGTH = STRLEN( L_S_SELECT-LOW ).
          IF WGF_PRDHA_LENGTH = 6. "PARTIAL PRDHA
             WGF_PRDHA = L_S_SELECT-LOW.
             CONCATENATE WGF_PRDHA '%' INTO WGF_PRDHA.
          ELSEIF WGF_PRDHA_LENGTH = 12. "FULL PRDHA
          MOVE-CORRESPONDING L_S_SELECT TO L_R_PRDHA.
          APPEND L_R_PRDHA.
          ENDIF.
        WHEN 'MATKL'.
          MOVE-CORRESPONDING L_S_SELECT TO L_R_MATKL.
          APPEND L_R_MATKL.
      ENDCASE.
    ENDLOOP.
reset the index of where we are in the gt_header table
g_tabix = 0.
perform populate_default_variables.
perform get_data.
perform build_detail.
    EXIT.
ENDIF.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
   IF G_COUNTER_DATAPAKID = 0.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between InfoSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
DESCRIBE TABLE LT_DATA LINES l_count.
IF g_tabix GE l_count.
    RAISE no_more_data.
ENDIF.
*CLEAN UP THE OUTPUT TABLE
refresh E_T_DATA.
LOOP AT LT_DATA FROM G_TABIX INTO LS_DATA.
    APPEND LS_DATA TO E_T_DATA.
Set global counter
    g_tabix = g_tabix + 1.
ENDLOOP.
   G_COUNTER_DATAPAKID = G_COUNTER_DATAPAKID + 1.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.
Forms
***INCLUDE LZBW_TC_FORECAST_SO_EXTF01 .
*&      Form populate_default_variables
      text
--> p1        text
<-- p2        text
FORM populate_default_variables.
data: wlf_name like tvarv-name.
clear: R_prdh3[], wlf_name.
*get the exclusion range from tvarv for the product hierarchy in
*question
concatenate 'ZBW_EXL_' WGF_PRDHA(6) INTO WLF_NAME.
SELECT LOW FROM TVARV INTO R_prdh3-low WHERE
                             NAME = WLF_NAME.
move: 'I'    to R_prdh3-sign,
         'EQ'   to R_prdh3-option.
append R_prdh3.
clear R_prdh3.
ENDSELECT.
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
CLEAR L_R_LABOR[].
SELECT LOW FROM TVARV INTO L_R_LABOR-Low WHERE
                             NAME = 'ZBW_TC_FORECAST_LAB_OFF'.
move: 'I'    to L_R_LABOR-sign,
         'EQ'   to L_R_LABOR-option.
append L_R_LABOR.
clear L_R_LABOR.
ENDSELECT.
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
ENDFORM.                    " populate_default_variables
*&      Form get_data
      text
--> p1        text
<-- p2        text
FORM get_data.
data: wlf_lmeng like vbep-lmeng.
*get all deliveries for date range for either a range of product hrchy
*or a like value
refresh int_records1.
if wgf_prdha ne space.
    select ivbeln iposnr iKLMENG jvkorg i~werks
           imatnr imeins mprdha mmatkl
    from vbap as i
       INNER JOIN VBAK AS j
       ON ( jvbeln = ivbeln
            and j~vbtyp = 'C' )
       INNER JOIN vbuk AS k
       ON ( kvbeln = ivbeln
            and k~lfgsk <> 'C'
            and k~gbstk <> 'C' )
       INNER JOIN vbup AS l
       ON ( lvbeln = ivbeln and
            lposnr = iposnr
            and l~lfgsa <> 'C'
            and l~gbsta <> 'C' )
       INNER JOIN mara AS m
       ON ( mmatnr = imatnr
{Start of insert by SRangaraj on June 21, 2005 >>RD3K915762
            and m~lvorm eq ' '
            and m~mstae ne '99'
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
            and m~extwg = '080' )
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
       INNER JOIN marc AS n
       ON ( nmatnr = imatnr
            and nwerks = iwerks
            and n~lvorm eq ' ' )
}End of insert by SRangaraj on June 21, 2005 >>RD3K915762
    into table int_records1 where ( i~abgru = ' '
                                 and i~klmeng > 0
                                 and m~prdha like wgf_prdha
                                 and m~matkl in l_r_matkl
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
                                 and m~labor in l_r_labor ).
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
elseif not l_r_prdha[] is initial and wgf_prdha = space.
    select ivbeln iposnr iKLMENG jvkorg i~werks
           imatnr imeins mprdha mmatkl
    from vbap as i
       INNER JOIN VBAK AS j
       ON ( jvbeln = ivbeln
            and j~vbtyp = 'C' )
       INNER JOIN vbuk AS k
       ON ( kvbeln = ivbeln
            and k~lfgsk <> 'C'
            and k~gbstk <> 'C' )
       INNER JOIN vbup AS l
       ON ( lvbeln = ivbeln and
            lposnr = iposnr
            and l~lfgsa <> 'C'
            and l~gbsta <> 'C' )
       INNER JOIN mara AS m
       ON ( mmatnr = imatnr
{Start of insert by SRangaraj on June 21, 2005 >>RD3K915762
            and m~lvorm eq ' '
            and m~mstae ne '99'
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
            and m~extwg = '080' )
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
       INNER JOIN marc AS n
       ON ( nmatnr = imatnr
            and nwerks = iwerks
            and n~lvorm eq ' ' )
}End of insert by SRangaraj on June 21, 2005 >>RD3K915762
    into table int_records1 where ( i~abgru = ' '
                                 and i~klmeng > 0
                                 and m~prdha in l_r_prdha
                                 and m~matkl in l_r_matkl
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
                                 and m~labor in l_r_labor ).
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
endif.
    sort int_records1 by vbeln posnr.
    delete adjacent duplicates from int_records1 comparing
    vbeln posnr.
*remove unnecessary records
    if not r_prdh3[] is initial.
    DELETE INT_RECORDS1 WHERE PRDHA+6(3) IN r_prdh3.
    endif.
*get the schedule lines for all of the above records and
*get the lowest schedule line date per so line item
     if not int_records1[] is initial.
     refresh int_records3.
     select vbeln posnr etenr mbdat into table int_records3
     from vbep for all entries in int_records1
                       where vbeln = int_records1-vbeln and
                             posnr = int_records1-posnr and
                             lmeng > 0.
     sort int_records3 by vbeln posnr etenr mbdat ascending.
     loop at int_Records1.
       loop at int_records3 where vbeln = int_records1-vbeln
                              and posnr = int_records1-posnr.
         int_records1-mbdat = int_records3-mbdat.
         modify int_records1.
         exit.
        endloop.
     endloop.
     refresh int_records3. free int_records3.
     refresh int_records2.
*get the deliveries and calculate the open quantities
    select vbelv posnv vbeln posnn rfmng plmin
                from vbfa into table int_records2
                              for all entries in int_Records1
                              where vbelv = int_records1-vbeln
                                and posnv = int_records1-posnr
                                and VBTYP_N = 'J'. "Dels
*calculate open quantities next
     loop at int_records1.
       clear wlf_lmeng.
       clear int_records2.
       loop at int_records2 where vbelv = int_records1-vbeln
                                and posnv = int_records1-posnr.
       case int_records2-plmin.
         when '-'.
          wlf_lmeng = wlf_lmeng - int_records2-rfmng.
         when others. "just add
          wlf_lmeng = wlf_lmeng + int_records2-rfmng.
        endcase.
       endloop.
       int_records1-klmeng = int_records1-klmeng - wlf_lmeng.
       int_records1-vbeln_dl = int_records2-vbeln.
       int_records1-posnr_dl = int_records2-posnn.
       modify int_records1.
    endloop.
    endif.
    delete int_records1 where klmeng le 0.
    refresh int_records2. free int_Records2.
ENDFORM.                    " get_data
*&      Form build_detail
      text
--> p1        text
<-- p2        text
FORM build_detail.
    LOOP AT int_records1.
*DO INDIVIDUAL MOVES - ITS FASTER THAN MOVE-CORRESPONDING
    move: int_records1-vkorg    to LS_DATA-VKORG,
          int_records1-werks    to LS_DATA-WERKS,
          int_records1-matnr    to LS_DATA-MATNR,
          int_records1-klmeng   to LS_DATA-KLMENG,
          int_records1-mbdat(6) to LS_DATA-YEARMONTH,
          int_records1-meins    TO LS_DATA-MEINS,
          int_records1-vbeln    TO LS_DATA-VGBEL,
          int_records1-posnr    TO LS_DATA-VGPOS,
          int_records1-vbeln_dl TO LS_DATA-VBELN,
          int_records1-posnr_dl TO LS_DATA-POSNR,
          int_records1-mbdat    to LS_DATA-WADAT_IST,
          int_records1-PRDHA    to LS_DATA-PRDHA,
          int_records1-matkl    to LS_DATA-MATKL.
    APPEND LS_DATA TO LT_DATA.
    clear: LS_DATA.
    ENDLOOP.
ENDFORM.                    " build_detail

Payment F110 - No data records found for these selection criteria, FZ208

Hi all,
I have done all configuration for payment medium for a customer in Norway. We use Telapay and program RFFONO_T. We have not activated the new general ledger but we have ECC 6.0 so I do not see why it should not work.
The invoices got paid with payment order but when I should download the file in Environment > Payment medium > DME Administration I got the following error message:
"No data records found for these selection criteria
Message no. FZ208
Diagnosis
No data could be accessed for this selection.
Possible causes are:
No data exists for the activated selection.
You have no authorization to display or edit data from this selection.
Procedure
First check whether your selection criteria are correct. You may need to expand the criteria to include a larger search area to check whether data exists in the system.
Make sure you have the proper authorizations for displaying and editing data. Read the Release note for DME management for further information on the authorization objects.
Proceed"
I have tried with different variants but that doesn´t matter. When I look at the payment run log I can see following:
"Additional parameter specifications 1400 SAPO02 are missing
Message no. FR193
Diagnosis
Entry 1400 $V2& is missing from the additional company code parameter table.
System Response
Processing was terminated.
Procedure
Maintain the entry according to the instructions in the program documentation."
I suppose that´s why I can´t get a file. Do any one of you know why I can´t get the file created. Please help.
Best regards Lisa

Hi Lisa,
I have a similar problem with program RFFONO_T and Telepay format for a Norwegian customer. Payment medium is not created. In the payment run log is the following message: "Additional parameter specifications XXXX SAPO02 are missing
Message no. FR193.Entry XXXX $V2& is missing from the additional company code parameter table."
According the program documentation for RFFONO_T, a company number (11 digits) has to be maintained under company code global data, additional details. The legal org.number with 9 digits is already entered but I do not understand where to enter a 11 digits company number? A user number (10 digits) is also entered in trans OB94 but the problem remains.
Did you find a solution to your problem?
Regards,
Agneta

TPM_MIGRATION No position exists for the selected criteria Msg no. TRQ0020

Similar Messages

Maybe you are looking for