TPM Software included from Infineon in the Install Driver App

Hi,
I discovered that the software necessary to activate the TPM module with its features, was not pre-installed and ready to use as a "program", onto my Portege under Programs, but, it was available for me when I looked in the All Programs - Toshiba-Support & Recovery-Application Installer, as "Infineon TPM Professional Package". I am very surprised that the program, "Infineon TPM Professional Package" was not pre-installed. But I did manage to obtain it from the Toshiba application feature to re-load programs or drivers, and I now have it running and my TPM is enabled.
I had done research on the various vendors who provide(sell) TPM software, and I did find the Infineon website among others who sell TPM software.
I thought I would mention this software for the TPM for those Toshiba owners who have a laptop with a TPM and who may need this software, and its availability to Portege owners through the Application Installer feature; I am not sure why this program was not pre-installed. I am glad that I did not purchase the software out of my own pocket, considering that I purchased this Portege thinking that the TPM would be enabled or could be, and it can, of course, now that I know about the TPM software being inside the "Installer" app, and not pre-installed.
Thanks, Debra
Solved!
Go to Solution.

Portege Z930-S9301
Downloads here.
I was just curious, Debra. Indeed, the spec above does not mention that software. So it's apparently not preinstalled.
There are two versions available for download at the site above.
Infineon TPM Software Professional Package (Version 4.03.3031.00 - Released 05/30/12)
Infineon TPM Software Professional Package (Version 3.60.2071.00 - Released 06/10/11)
-Jerry

Similar Messages

How do I start Imac from scratch and the install my backup stuff anew

How do I start Imac 10.9.2 from scratch and the install my backup stuff anew

See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs,
Macintosh OS X Routine Maintenance,
Mac troubleshooting: What to do when your computer is too slow,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information.

I bought a Sandisk Connect Media Drive, downloaded the app from iTunes. Before iOS 8, movies played fine. After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive. Anyone else have a similar issue?

I bought a Sandisk Connect Media Drive, downloaded the app from iTunes. Before iOS 8, movies played fine. After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive. Anyone else have a similar issue?

I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
DRM audio is not effected as this is handled by the native iOS music app.
As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.

I've recently formatted my 10.7.4 mountain lion MacBook from 2007. The hard drive is wiped and I think it deleted to OS too. How do I put the OS back on it?

I've recently formatted my 10.7.4 mountain lion MacBook from 2007. The hard drive is wiped and I think it deleted to OS too. How do I put the OS back on it?

Wiping the drive does indeed delete the OS. Try this -
Boot to the Lion (10.7.4 is Lion not Mountain Lion) recovery partition by restarting the computer and holding down the command and R keys during startup.
If this works, reinstall from here. You must be connected to the Internet to do this.
If this does not work, possibly because you reformatted the recovery partition as well, you will need to reinstall from your original disks (assuming it came with 10.6 or earlier.) Boot to the disk by holding down the C key during startup and run the installer.
Best of luck.

I want to move my movies from itunes on the hard drive to the cloud but dont know how

I want to move my movies from itunes on the hard drive to the cloud but dont know how

Are these movies you purchased thru iTunes?

I have a G5 with Tiger to sell and want to erase all my data from it, but the cd drive won't work so I can't use the OS10 start up disk. Answers?

I have a G5 to sell and want to erase all my data from it, but the cd drive won't work so I can't use the OS10 start up disk. Any way to do it?

Do you have another Mac? If so, you can startup this one in "Target Disk Mode" (instructions here) and connect it to another Mac to delete the home folders (or the entire drive, if that's what you want).
One piece of advise, though: after deleting the data, and of course emptying the Trash, it wouldn't hurt to also securely erase the "free space" of the drive (instructions here) before disconnecting the old Mac from the new one. This can be helpful, since "deleted" data is often retrievable with ease unles it's written over after the deletion.

Had hard drive renewed due to product recall (iMac) backed up complete system on time machine . Had the drive done got mac back tried to reinstall from time machine .The new drive tells me that the space has been taken up but can't find where the file hav

Had hard drive renewed due to product recall (iMac) backed up complete system on time machine . Had the drive done got mac back tried to reinstall from time machine .The new drive tells me that the space has been taken up but can't find where the file have gone. Need to free up the space that the ghost file take up so I can drag drop from ex drive onto harddrive

Here's the scoop, new friend.....
When you boot into Time Machine you'll get the same OS X Utilities screen as you would if you booted into the Recovery HD. So, from there go into Disk Utilities to erase/format your internal drive. After that's done, back out to the OS X Utilities screen and select the restore option. Just follow the prompts to select the TM back up date you want to restore from and where to restore it to. Pretty straight forward.

HT5100 How to get iTunes U files from iTunes to the iTunes U app, not music app

I've downloaded a full iTunes U course on my iMac using iTunes. I have an iPad and iPhone bothe with the iTunes U app. All software is up to date. The course is viewable on my Mac and in the music app on my iOS devices but not the iTunes U app. How can they all sync?

All you need to do is the following:
1. Select iTunes U tab from your ipod in itunes
2. Check the box next to "Sync iTunes U" at the top
3. Make sure the box next to "Automatically include" is UNCHECKED
4. Select any course; check every box in the right menu.
5. Click "Apply" at the bottom right of screen.
***If you notice the percent of your videos may increase (at the bottom of the screen that shows the percentage of your music and videos, etc.), don't worry because after it is done syncing it will fix itself.
6. Look at your ipod menu on the left toolbar...iTunes U should show up. At this point you can sync all courses and they will appear in this menu.
7. NOW you can delete them.
For some reason it doesn't work to sync automatically, so if you have a lot of courses, then it ***** for a bit, but at least you don't need to erase your entire ipod.

Can't boot from Recovery or USB Install Drive

Hi Folks,
My (mid-2011) MacBook Pro [Mavericks (10.9)] is not booting up – not matter what I try.
I've tried booting into Recovery (using command-R), Internet Recovery, and tonight I finally created a bootable USB install drive – no luck there either (pressing option to get to the startup disk manager). I can select which drive I want to boot from, but after selecting the USB drive and clicking on the arrow, I get to the gray apple screen (with the spinning progress wheel), and then it just stalls on a blank light gray screen (and the fans spin up). I've waited up to 45 minutes in this state, still nothing.
The same thing happens when I try to boot normally. I have Filevault 2 enabled, so I get to the user account screen – but after selecting my account, the machine goes from the gray apple startup screen to the blank gray screen and hangs.
I've tried resetting the NVRAM, booting from an install CD, etc., etc., and nada.
Does anyone have any advice where to go from here? I had hoped the USB install drive would be the answer, but for whatever reason, I'm simply having no luck. Any help would be greatly appreciated – this is my main rig and I can't afford to have it down for much longer…
Thanks so much!

What install "CD"?? (sure it's not a DVD disc) did you try.
Not sure it is related to the Filevault system but if you can't get the Recovery HD partition to boot that may be caused by having Filevault enabled.
Have you tried the Real Online Internet Recovery system? Hold down the Command + Option/Alt + r keys at startup and keep holding them down until you see a globe on the screen. If after you see the globe, or you never get a globe on the screen, and you get that same Grey color on the screen then you more than likely have a hardware problem. You should make an Appointment with your local Apple store Genius Bar for your Mac to be properly diagnosed.

How do I stop texts from coming to the new Messages app on my macbook?

I was on my computer and wanted to try out the new Messages app so I opened it up, and wrote a message to my g/f and one to my friend. Now everytime they text me I get notifications on my macbook pro. I have clicked the X next to their name on the Messages app to delete the conversation from Messages but whenever they text me I still get pop ups on my macbook.
I do know how to turn of notifications for the messages app completely but I don't want to do that.

Hi,
You could just disable the Account as has been said (Untick the "Enable this Account" box)
You can remove the Apple ID
GO to the Preferences > Accounts and the iMessages account
Use the Account Detail Button
Use the Sign Out button (Removes ID)
Either or these will stop Messages logging in to the iMessages server and trying to Sync iMessages sent to your Apple ID.
10:00 PM Tuesday; September 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I had a system crash(with Vista).I cannot start up windows on that drive.I have Win 7 on a new drive.I can access the files on the old drive to copy them.I would like to know how to find and copy the bookmarks from Firefox on the old drive and copy to the

Hi:
I had a system crash and I cannot start windows (Vista)on it.I have a new drive running Win 7.How do I copy the files from the old drive's files to the new?The Bookmark files that is.
Thanks.Any help is appreciated.
Shaun

This could help.
http://support.mozilla.com/en-US/kb/Backing+up+your+information
Basically, you have to copy your profile from the old hdd to the new one.

Cannot find the installed driver for Canon Pixma ip6600D

Hello,
I'm pretty new with Mac and OS X and got one problem to use a previous installed driver.
First, please excuse my bad english, I'll do my very best
I've got a Buffalo Linkstation Live 320GB with implemented USB Ports.
You can take the USB Port to use with a printer.
The Linkstation will be a Windows Printserver.
I've connected a Canon Pixma ip6600D at USB Port one and all works fine with Windows XP and Vista via network.
Printing with this Network device uses Windows Network-printing like -> workgroup\buffalo\lp (lan printer)
With Windows this works very well. But now im using OS X Leopard.
So I've downloaded the Canon Mac OS X 10.5 Driver for the ip6600D (can be used for Network printing) and installed it.
OS X wants to reboot, so I think the extension is installed fine.
After this im going to "System adjustments" -> "Printers and Fax" -> "Windows" -> "Workgroup" -> "buffalo" -> "lp"
The Printer is found and here comes my problem: The ip6600D driver does not appear in the drop down list. Only Gutenprint ip6700.
I'm able to print with this driver, but it doesn't work very well and im not able to use CD printing.
So, wehere ist the ip6600D driver? Lost in nowhere?
If I want to search for the driver, nothing could be found.
Searching with Spotlight for ip6600 doesn't find something to use.
Only the installer image of the driver and some web links.
How do I choose the installed ip6600D driver?
Thank you much for any help.

Since there doesn't appear to be an iP6600 driver within the Gutenprint v5.1.3 list, then you could try one of the other iP models, like the iP5200. The key is to find a model that uses the same ink tanks as your iP6600D (and preferably the same engine but that is not as easy to find). If one of the other IP models doesn't help, then you could try the S800. With older versions of Gutenprint I would recommend this model as it would be good enough for text printing, but not that good for images.
If you are unable to find a compatible printer then you may have to look at changing some things. The Canon printer driver has not been designed to be used on the Mac OS X when the printer is being shared by Windows, hence the need to Gutenprint. If this model is not supported in later versions of Gutenprint, then you could look at using PrintFab (which you will have to pay for) or changing the network setup so that the printer is not connected to Windows, such as getting an Airport Express/Extreme. This would allow both OS's to connect to the printer using the Canon driver. Or you could connect the printer to the Mac and get Windows to connect to the Mac share using Bonjour for Windows.

How can I stop Adobe Reader from reading (seeking) the floppy drive when opening/closing any PDF?

Ever since I opened a PDF file from my floppy drive Adobe Reader insists on checking/seeking/reading the floppy drive whenever I open and whenever I close any PDF (not using the floppy). It is very annoying, as I use many PDFs per day and it creates a delay and noise every time.

Edit>Preferences
Under Page Display:
Where it says "Location of referenced files", if it shows "Floppy Disk A:/" clear the box, or choose an alternate location if you can't clear it.
Also, under Search:
Click "Purge Cache Contents"

Is it possible to get a Virus from an over-the-air distributed app?

I've been invited to participate of a beta and have seen 2 apps that can be downloaded directly from safari over-the-air. There's any risk they can harm my device in any way? And no, my iphone is not jailbroken

Thank you for the help. The developer did say they're not colllecting the UDID's or the data on the phones, but I'm not trusting my iphone and my account's safety in his words only. He did also mention that the date had to be changed in order to download it, maybe because Apple doesn't allow it to be distributed that way anymore, anyways I'll just stick with the apps I get from the Store.
Best Regards.

How do I change the install drive default for Creative Cloud Suite? I have a 64 gb SSD drive as dri

I bought another 128 GB SSD drive just for the Adobe applications. I can't figure how to change the download destination as it download or before it installs. What am I missing here?

I am sorry Scottcommercialrealtor I missed the fact you were installing Creative Cloud, we have had a lot of traffic with the release of CS6 and Creative Cloud, you can only customize the install location for Creative Cloud. You can do so by clicking on your name in the Adobe Application Manager and selecting preferences. The install files will have to be downloaded to your OS volume but you can choose to install many of the components of the applications on a separate drive. The shared components though will also need to be installed on your OS volume.
SSD solutions I would honestly recommend having your OS and Apps installed on the same drive so you can maximize your performance. You can then use a standard hard drive for your documents, videos, and images. You mentioned that you purchased a 128 gig SSD. You might consider cloning the 64 gig drive over to the 128 and then having your OS and Apps installed on the same drive.

TPM Software included from Infineon in the Install Driver App

Similar Messages

Maybe you are looking for