TPM12 Report not shwoing Product Type and Product Type Text

Hi ,
After we went live with a upgrade the report TPM12 which is run by the Treasury department every day, is now showing the blank values for "Product Type", "Product Type Text", "Transaction Type", and "Transaction Type Text".
Which was not the case earlier.
Any adivce please.
Thanks,
Venkat

Good day
We have a similar issue.
In our system the line item type for the CW product was IDCW. When we however split them by batch into two sub-lines, the new lines defaulted to IDLV (instead of the expected IDCW).
So I think Alexander's diagnosis is spot on?
My question though... What logic does EWM use to derive the item type for the sub-lines? Because surely it should be the same as the 'parent' line item (IDCW in the case) ?
Please advise
Callie

Similar Messages

Product Attributes and Set types Tables

Hi,
In which Table does the Product Attributes and Set types stores in CRM?
Can anybody tell me?
Thanks

Hi,
I am not able to get you can you explain it clearly by taking this example
I have created the Product Called Monitor
For that Monitor i have maintained the following attributes like
Monitor Size like 15 or 17 or 21inchs
Monitor Type like Flat or LCD Type
I have created the Set type for that.
I have assigned those things to Product.
What are the tables are involved in this process can anybody help me out regarding this?
Thanks

Replication of product master and Product category

Hi
Please let me know steps involved in replicating
Product master and product category from R/3 to SRM
Regards
Ashish

Hi Ashish,
The blogs mentioned by Kathirvel explains clearly the entire replication procedure of Master data from R/3 to SRM.
Neverthless find some points which needs to be taken care during replication :
1. Ensure that the tables CRMCONSUM, CRMSUBTAB, CRMPAROLTP, CRMRFCPAR are duly filled in R/3 system.
2. Endure that SMOFPARSFA table is duly filled in SRM system.
3. Maintain the filter settings using R3AC3 and R3AC1 as per your requirement in SRM system.
4. Set up the Administrative console using SMOEAC and create both R/3 and SRM nodes and define the site attributes.
5. Ensure that all the queues (both inbound and outbound) are empty in both the systems before replication.
6. Start initial load of customizing objects (DNL_CUST_BASIS3, DNL_CUST_PROD0 & DNL_CUST_PROD1) using R3AS and monitor the loaded jobs using R3AM1.
7. After successful replication of customizing objects, load the business objects (material_master, service master) using R3AS.
8. The replicated material groups and product types can be seen using COMM_HIERARCHY txn.
9. The replicated materials can be seen using COMMPR01.
Hope this makes you more clear about the settings required.
Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

Oracle Streams 'ORA-25215: user_data type and queue type do not match'

I am trying replication between two databases (10.2.0.3) using Oracle Streams.
I have followed the instructions at http://www.oracle.com/technology/oramag/oracle/04-nov/o64streams.html
The main steps are:
1. Set up ARCHIVELOG mode.
2. Set up the Streams administrator.
3. Set initialization parameters.
4. Create a database link.
5. Set up source and destination queues.
6. Set up supplemental logging at the source database.
7. Configure the capture process at the source database.
8. Configure the propagation process.
9. Create the destination table.
10. Grant object privileges.
11. Set the instantiation system change number (SCN).
12. Configure the apply process at the destination database.
13. Start the capture and apply processes.
For step 5, I have used the 'set_up_queue' in the 'dbms_strems_adm package'. This procedure creates a queue table and an associated queue.
The problem is that, in the propagation process, I get this error:
'ORA-25215: user_data type and queue type do not match'
I have checked it, and the queue table and its associated queue are created as shown:
sys.dbms_aqadm.create_queue_table (
queue_table => 'CAPTURE_SFQTAB'
, queue_payload_type => 'SYS.ANYDATA'
, sort_list => ''
, COMMENT => ''
, multiple_consumers => TRUE
, message_grouping => DBMS_AQADM.TRANSACTIONAL
, storage_clause => 'TABLESPACE STREAMSTS LOGGING'
, compatible => '8.1'
, primary_instance => '0'
, secondary_instance => '0');
sys.dbms_aqadm.create_queue(
queue_name => 'CAPTURE_SFQ'
, queue_table => 'CAPTURE_SFQTAB'
, queue_type => sys.dbms_aqadm.NORMAL_QUEUE
, max_retries => '5'
, retry_delay => '0'
, retention_time => '0'
, COMMENT => '');
The capture process is 'capturing changes' but it seems that these changes cannot be enqueued into the capture queue because the data type is not correct.
As far as I know, 'sys.anydata' payload type and 'normal_queue' type are the right parameters to get a successful configuration.
I would be really grateful for any idea!

Hi
You need to run a VERIFY to make sure that the queues are compatible. At least on my 10.2.0.3/4 I need to do it.
DECLARE
rc BINARY_INTEGER;
BEGIN
DBMS_AQADM.VERIFY_QUEUE_TYPES(
src_queue_name => 'np_out_onlinex',
dest_queue_name => 'np_out_onlinex',
rc => rc, , destination => 'scnp.pfa.dk',
transformation => 'TransformDim2JMS_001x');
DBMS_OUTPUT.PUT_LINE('Compatible: '||rc);
If you dont have transformations and/or a remote destination - then delete those params.
Check the table: SYS.AQ$_MESSAGE_TYPES there you can see what are verified or not
regards
Mette

Product hierarchy and Product allocation

Dear SD Gurus,
Can I have some good docs on Product hierarchy and Product allocation related to SAP SD.
my mail id is [email protected]
Regards,
Rakesh

Hi
Product allocation helps in allocating prodects based on customer requirement.
Please go through this link for product allocation
http://www.sap-img.com/sap-sd/implement-the-product-allocation-functionality.htm
For product hierarchy go through this link
http://help.sap.com/saphelp_46c/helpdata/en/77/1a39516e36d1118b3f0060b03ca329/frameset.htm
give points if this useful
Thanks
Anil

I have an education version of cs 6 creative suite, I have the box and used in once on my old laptop I am now trying to find serial number to reuse on new laptop but only have product code and product number

I have an education version of cs 6 creative suite, I have the box and used in once on my old laptop I am now trying to find serial number to reuse on new laptop but only have product code and product number

Hi Sophie,
Normally you can find your serial registered to your AdobeId. To find it please login to the Adobe website and check if you did register it to your account.
Serial number, Redemption, and Product codes | Student & Teacher Editions
In general you will go true a educational verification afterwards you get the serial. So its in your email or account. If you still have issues get in contact with the chat team to get help.
Good luck!

Confusion on pair type and Processing Type

Dear Experts
I have the the below doubt in TIP Table
Pair type gives the information on the how the Time pairs being generated as
0-      Non recorded Time
1-      Attendences
2-      Absences
3-      Attendences Recorded from client
Processing Types also gives information on how the Time pairs are coming with below spec
- Pair is deleted at a later stage
BLANK Pair not included in calculation of productive time
P Attendance pair, included in calculation
of planned working time
A Absence pair, included in calculation
of planned working pair
S Planned working time pir
M Overtime pair
Kindly let me know on what senerios we go with pair type and processing type as they have the same meaning
Regards
Giri

Hi Shruit
i am clear but as mentioned in pair type 1= attendence (2011 - Positive) and Planned working time for negative . in processing type S, A,P also signifies the information how the Time pairs are Generated   and also we have Origin indicator of time pair O which specifies wheather the time pairs are coming from E,M.A,P and D.
Since they have same information why Sap has defined pair Type processing Type and Origin Indicator
                                                             I got the inputs theriotically but practically i am not able to get the TIP Table to read and understand .
Thank you very much for the inputs
Giri

Message types and idoc types

hi,
     i need the list of message types and idoc types for edi.
      can any one of u pls send it.

Hi,
Check the OSS notes 104606.
The following list maps the logical messages and IDoc types to the corresponding ANSI X12 transaction sets.That is, the logical message can be copied to the transaction sets named.
204 Motor carrier shipment information
           The logical message is SHPMNT or IFTMIN, the IDoc type SHPMNT03.
214 Transportation carrier shipment status message
           The logical message is TRXSTA, the IDoc type TRXSTA01. Inbound processing is supported.
304 Shipping instructions
           The logical message is SHPMNT or IFTMIN, the IDoc type SHPMNT03.
810 Invoice or billing document (also 880)
           The logical message is INVOIC, the IDoc type INVOIC01.
812 Credit and debit advice
           The logical messages are CREADV or DEBADV, the IDoc types PEXR2001 and PEXR2002.
820 Payment order and credit advice
           For the payment order, the logical message is PAYEXT (REMADV), the IDoc types PEXR2001 and PEXR2002.
           For the credit advice (ERS - Evaluated Receipt Settlement), the logical message is GSVERF, the IDoc type GSVERF01.
823 Lockbox
           The logical message is LOCKBX, the IDoc type FINSTA01. Inbound processing is supported.
830 Delivery schedule (LAB)
           The logic message is DELINS (from the EDI standard ODETTE) or DELFOR the IDOC type DELFOR01.
832 Price catalog (also 879, 888, 889)
           The logical message is PRICAT, the IDoc type PRICAT01. Outbound processing is supported.
834 Benefit enrollment and maintenance
           The logical message is BENREP, the IDoc type BENEFIT1. Outbound processing is supported.
840 Request
           The logical message is REQOTE, the IDoc types ORDERS01 to ORDERS04.
843 Quotation
           The logical message is QUOTES, the IDoc types ORDERS01 to ORDERS04.Outbound processing is supported.
850 Purchase order or order (also 875)
           The logical message is ORDERS, the IDoc types ORDERS01 to ORDERS04.
852 Stock and sale data
           The logical message is PROACT, the IDoc type PROACT01.
855 Order confirmation (also 865)
           The logical message is ORDRSP, the IDoc types ORDERS01 to ORDERS04.
856 Transport and shipping notification (ASN - Advanced Ship Notification)
           For transport in the SAP application, the logical message is SHPMNT or SHPADV, the IDoc types SHPMNT01 to SHPMNT03.
           For the delivery in the SAP application, the logic message is DESADV, the IDoc types DESADV01 (to be discontinued), DELVRY01 and DELVRY02.
860 Ordering modification (also 876)
           The logical message is ORDCHG, the IDoc types ORDERS01 to ORDERS04.
861 Credit advice (ERS - Evaluated Receipt Settlement)
           The logical message is GSVERF, the IDoc type GSVERF01.
862 Delivery schedule (FAB)
           The logic message is DELINS (from the EDI standard ODETTE) or DELJIT, the IDOC type DELFOR01.
864 Text message
           The logical message is TXTRAW, the IDoc type TXTRAW01. Inbound processing is supported.
940 Shipping order and stock order
           The logical message is SHPORD or WHSORD, the IDOC type DELVRY01.
945 Shipping confirmation and stock confirmation
           The logical message is SHPCON or WHSCON, the IDoc type DELVRY01.
997 Functional acknowledgment
           This is a technical confirmation. This is not exchanged via an individual message but the status report for IDoc processing. The status values used are:
           "22" Shipping OK, acknowledgment has yet to come
           "16" Functional acknowledgment positive
           "17" Functional acknowledgment negative
           The status values "14" and "15" are available for the Interchange Acknowledgment accordingly. Source code corrections
Cheers
VJ

Is there any standard ODS for Contract (value type and quantity type)?

We know that in MM, contract records can be categorized into two different categories, Value type and Quantiy type. We are trying to see if there is any Contract ODS in business content that we can install which can take care of these two types of contract records that we can bring them over to BW from R3?
Thanks

Hi Kevin,
Please see this link,ODS looks related to your requirement.But seems its for CRM and not for MM.
http://help.sap.com/saphelp_nw04/helpdata/en/38/c3813ed9d23e44e10000000a114084/frameset.htm
cheers,
Vishvesh

Message type and idoc type

hi all,
i'm working on integration between sap and non sap.can anyone please tell me the message types and idoc types available for Funds Management and Project system modules.it will be of a great help,full points will be alloted imm.

What data you want to send / receive.
The site contains all message types which sap provides.
You can select your release and check in FI .
You can also check in tcode WE81 for available doc types .
Some of them I found are
GLCORE     Master data G/L accounts (CORE IDOC)
GLFETC     Request G/L accounts
GLM000     Test reduction GLMAST
GLMAST     Master data G/L accounts (master IDOC)
GLROLL     FI-GLX message type rollup
Your requirement is not clear as to what you want to send / receive with IDOCS.
Cheers

No archive information found for object type and document type

Hi All,
When i try to view the print preview for a perticular doc type, system is giving the error as "No archive information found for object type and document type"
Diagnosis
    No information was found about optical archiving. This may be due to
    either of the following reasons:
    1. No valid archiving parameters were passed
    2. Your system is not configured for optical archiving
System Response
    Processing is cancelled.
Procedure
    Specify valid archiving parameters or check whether your system is configured for optical archiving
Regds,
CB

Hello,
You are trying to Print & also archive by selecting the option Print & Archive.
You have to do archivelink configurations and then create document type and assign to the object type with content repository with archivelink table.
If you want to archive the spool or output then you have to use object type as DRAW. If you are archiving invoice document or letters or so on then you have to know the object type/Business object of the transaction.
Please note that for archivelink configuration, attachment will be either stored in archive server or in SAP database table based on business requirement.
Hope this will give you some understanding on archiving area.
-Thanks,
Ajay

MRP Type and procurement type tabs in mmd

Hello Experts,
I was trying to check the MRP Type for a material master.
In MM01, I could not locate such a tab. I think I have seen it before.
I have entered most of the selection info like Material code etc.
Or is it that MRP type is not visible from material master?
What if its blank?
I check the MARC table for the material code and the MRP type is blank.
Also, in which tab can I maintain the procurement type? Could not find such a field in mmd.
Have a nice day everyone.
regards
Bass

Hi,
MRP type and Procurement type are under tab MRP 1 & MRP 2 respectively in material master.
Check MRP1/2/3/4 tabs all information you need is there.
Kapil

Table Types and Line Type

What is the need of Table Types,
when there is Tables.
Even when iam using in the Abap Programs in se38..
iam not getting any difference..
Even i want to about the use of Line type
when there is the structure..
iam sap 4.7 they gave that Table type describe the structure and
functional attributes of an internal table.

Way: 1:
Go to SE84 --> Select ABAP Dict --> Table Types -->
Enter the short names like ORDER wih leading and ending * on the Table Types Field. ---> F8
This will bring all related entries of Table Types(Line Types) having ORDER has a part of its Name.
Way:2:
If you know the Table Name, then go SE11 --> Putch in the Table Name --> Press Display
Now put the cursor on the Table Name field, press CNTLSHFTF3, on the WHERE USED LIST Pop up, Select only the TABLE TYPE Option and press EXECUTE.
This will bring the Table Types and Line Types.
SAP Table Types
I. Transparent tables (BKPF, VBAK, VBAP, KNA1, COEP)
Allows secondary indexes (SE11->Display Table->Indexes)
Can be buffered (SE11->Display Table->technical settings) Heavily updated tables should not be buffered.
II. Pool Tables (match codes, look up tables)
Should be accessed via primary key or
Should be buffered (SE11->Display Table->technical settings)
No secondary indexes
Select * is Ok because all columns retrieved anyway
III. Cluster Tables (BSEG,BSEC) Should be accessed via primary key - very fast retrieval otherwise very slow
No secondary indexes
Select * is Ok because all columns retrieved anyway. Performing an operation on multiple rows is more efficient than single row operations. Therefore you still want to select into an internal table. If many rows are being selected into the internal table, you might still like to retrieve specific columns to cut down on the memory required.
Statistical SQL functions (SUM, AVG, MIN, MAX, etc) not supported
Can not be buffered
IV. Buffered Tables (includes both Transparent & Pool Tables)
While buffering database tables in program memory (SELECT into internal table) is generally a good idea for performance, it is not always necessary. Some tables are already buffered in memory. These are mostly configuration tables. If a table is already buffered, then a select statement against it is very fast. To determine if a table is buffered, choose the 'technical settings' soft button from the data dictionary display of a table (SE12). Pool tables should all be buffered.
Table Types : A table type describes the structure and functional attributes of an internal table in ABAP. In ABAP programs you can reference a table type TTYP defined in the ABAP Dictionary with the command
DATA : itab TYPE TTYP.
Reafer these links below for clear ideas.
http://help.sap.com/saphelp_nw04/helpdata/en/fb/f14736a1f0ad1fe10000009b38f839/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/90/8d7304b1af11d194f600a0c929b3c3/frameset.htm
Thanks
Allot points if this helps!

Help in using record type and object type

Hi Experts,
I am new to object types and record types.
I want to return the output of this query using one OUT parameter
from the procedure using RECORD type or OBJECT type.
with out using refcursor.
SELECT empno,ename,sal FROM emp WHERE deptno=30;
Let us assume the query is returning 50 records.
I want to send those 50 records to OUT parameter using record type or object type.
Please provide the for the requirement code using RECORD TYPE and OBJECT TYPE separately.
Your earliest response is appreciated.
Thanks in advance.

Hi All,
I have tried this.But it ising not work
CREATE OR REPLACE PACKAGE maultiplevalues_pkg
IS
TYPE t_record IS RECORD
(empno emp.empno%TYPE,
ename emp.ename%TYPE,
sal emp.sal%TYPE);
V_RECORD t_record;
TYPE t_type IS TABLE OF V_RECORD%TYPE;
PROCEDURE maultiplevalues_pROC(p_deptno IN emp.deptno%TYPE,
dept_result OUT t_type);
END;
CREATE OR REPLACE PACKAGE body maultiplevalues_pkg
IS
PROCEDURE maultiplevalues_pROC(p_deptno IN emp.deptno%TYPE,
dept_result OUT t_type)
is
begin
dept_result :=t_type();
for I in(
select EMPNO,ENAME,SAL from EMP WHERE deptno=p_deptno
LOOP
dept_result.extend;
dept_result(i).empno :=i.empno;
dept_result(i).ename :=i.ename;
dept_result(i).sal :=i.sal;
END LOOP;
END;
END;
Please help me OUT return multiple values through single OUT variable in a procedure.
Thanks.

Difference between fully-specified data types. and generic types

Hi,
Can anyone tell me the difference between fully-specified data types and generic types.
Thanks in advance.
Regards,
P.S.

HI
Generic table types
INDEX TABLE
For creating a generic table type with index access.
ANY TABLE
For creating a fully-generic table type.
Data types defined using generic types can currently only be used for field symbols and for interface parameters in procedures . The generic type INDEX TABLEincludes standard tables and sorted tables. These are the two table types for which index access is allowed. You cannot pass hashed tables to field symbols or interface parameters defined in this way. The generic type ANY TABLE can represent any table. You can pass tables of all three types to field symbols and interface parameters defined in this way. However, these field symbols and parameters will then only allow operations that are possible for all tables, that is, index operations are not allowed.
Fully-Specified Table Types
STANDARD TABLE or TABLE
For creating standard tables.
SORTED TABLE
For creating sorted tables.
HASHED TABLE
For creating hashed tables.
Fully-specified table types determine how the system will access the entries in the table in key operations. It uses a linear search for standard tables, a binary search for sorted tables, and a search using a hash algorithm for hashed tables.
Fully-specified table types determine how the system will access the entries in the table in key operations. It uses a linear search for standard tables, a binary search for sorted tables, and a search using a hash algorithm for hashed tables.
see this link
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb366d358411d1829f0000e829fbfe/content.htm
<b>Reward if usefull</b>

TPM12 Report not shwoing Product Type and Product Type Text

Similar Messages

Maybe you are looking for