Tpnotify with TPACK flag hangs after upgrading to Tuxedo 12c RP020

Hi,
We are experiencing issues with tptonify with TPACK flag set after upgrading to Tuxedo 12c. Looks like tpnotify is not returned or reporting errors. Is there anything to do with "009. Bug16506218 - TPNOTIFY WITH TPACK FLAG THROW OUT EXCEPTION"? Is there any documentation about the new flag TPACK_INTL?
Thanks

Hello,
If all you have done is upgrade to Tuxedo12 the behavior should be the same. The TPACK flag definition is:
"The request is sent and the caller blocks until an acknowledgement message is received from the target client"
Is there any additional change(e.g. in your client) you have made?
What Tuxedo version are you upgrading from?
The bug 16506218 fix was for a jolt client exception and a JSH failure.
Do you see an error or is the process which executes tpnotify() just hanging/blocking waiting for the ack message?
The flag that you mention is actually an undocumented customer requested enhancement that went into Tuxedo 10.3.
Are you using it? Using it changes the tpnotify() behavior dependent upon the client status.
Regards,
Bob Finan

Similar Messages

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

Impossible Upload files with Filezilla FTP Client after upgrade win8 to win8.1

Hi
Things were working fine with win 8 but, after Upgrade to win 8.1 is not possible upload files with Filezilla FTP Client.
is there anyone facing same problem?
thanks in advance for any answer to help me solve this issue
Regards
TC

Hi,
Please Change your transfer settings in site manager from either default or passive to active it to see what's going on.
Also, check IE compatibility mode.
In addition, I suggest you install all latest updates for Windows since these updates will improve and fix some known issues.
Kate Li
TechNet Community Support

Strange problem with my ipod 2g after upgrade to os 4.2

Strange problem with my ipod 2g after upgrade to os 4.2
the problem with volume some times when i switch on the ipod i hear the sound
alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
i hope i get help

I would try in order:
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backu via iTunes.
- Restore the iPod to factory defaults/new iPod.

Adobe apps hang after upgrade to Yosemite

Adobe apps hang after upgrade to Yosemite - requires force quit and reopen...any advice?

thanks, Kurt...we'll see...I upgraded to Yosemite so I could load the newer Adobe CC anyway - I'll upgrade the suite to the cloud and see what happens

I dont have any Add-ons with my FireFox. After upgrade to the latest version 26.0 I'm keep getting Script error "chrome://global/content/binding/popup.xml:580"

Quite frequently I'm keep getting the error like "Script is not responding....I dont have any Add-ons with my FireFox. After upgrade to the latest version 26.0 I'm keep getting Script error "chrome://global/content/binding/popup.xml:580" Stop or Continue Script.
Currently I don't have any Add-Ons installed in my FireFox, so I can suspect any Add-ons.
I'm facing this issue only after the upgrade to 26.0 recently.

Ifound this article:
https://support.mozilla.org/pt-BR/questions/746499
in this article the problem is similar not the same, but sdmitch16 had a intersting idea disable the chrome options
and i search more in the internet i also found this:
https://support.mozilla.org/pt-BR/questions/760704

HI! I am using iTunes with Windows 7 64bit.after upgrading itunes to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

HI! I am using iTunes with Windows 7 64bit.after upgrading itunes to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

Refer this article to reset Winsock to it's default. Your PCTools may have inserted LSP.
http://support.apple.com/kb/TS4123?viewlocale=en_US
After reset and restarting windows, you may get a prompt to remap LSP, click no.

Iphoto hangs after upgrading to Yosemite and latest iPhoto version

It tells me the library needs upgrading, and starts to search the library. The progress bar suggests something is happening then hangs after about 99% completion. I have had to force close twice after several hours stuck at that point and then start the whole process from scratch when I restart.

Have you followed these instructions - http://www.fatcatsoftware.com/iplm/Help/rebuilding%20a%20corrupted%20iphoto%20li brary.html
iPhoto Library Manager > Help > Rebuilding a corrupted iPhoto library
Printable help
Rebuilding a corrupted iPhoto library
If you have an iPhoto library that is corrupt and causing iPhoto to crash or otherwise be unusable, iPhoto Library Manager provides the ability to rebuild your library based on the information found in its library data files. Note that iPhoto also has a built-in rebuild function that can be sometimes be used to repair a corrupted library database. You can find instructions on how to use that on Apple's website at http://support.apple.com/kb/HT2638 (iPhoto 6 or later) or http://support.apple.com/kb/HT2042 (iPhoto 5 or earlier).
iPhoto Library Manager's rebuild works differently, in that instead of trying to repair the library in place, it creates a brand new library and tries to reimport the entire contents of the original library into the new one, including reconstructing albums, photo metadata, etc. Note that rebuilding a library has all the same limitations as other photo transfer operations as far as what can and can't be copied between libraries. Also, depending on how badly damaged the library is, iPhoto Library Manager may or may not be able to piece together some or all of the library metadata.
To start a rebuild, select the library you would like to rebuild, then choose the "Rebuild Library" item from the "Library" menu. You will be prompted to choose a location for the rebuilt library, and whether or not you want iPLM to scavenge orphaned photos it finds in the library package. Once you've made your choices, iPLM will examine the library and rebuild the library structure and photos as best it can, then display you a preview of what it was able to find. If your library is badly damaged and the preview is missing a lot of content from the original library, this can save you from going through with a rebuild that won’t end up being of much help.
Once you've had a chance to examine the preview, if you want to go forward and create the rebuilt library, click the "Rebuild" button in the upper right. iPhoto Library Manager will create a new library and start importing the contents of the original library into the new one.
Scavenging photos
In some cases, either the iPhoto library database is too damaged for iPhoto Library Manager to be able to salvage any information from it, or the library data is incomplete and there are photos that still exist inside the library package, but iPhoto has lost track of them. In these cases, you may want to check the "Scavenge orphaned photos" checkbox when choosing a location for the rebuilt library. After iPhoto Library Manager has read the library data as best it can, it will perform an additional pass through the package and locate any photos that are no longer referenced in the library database. Any additional photos that are found will be included in the rebuild, and a new "Scavenged Photos" album will be created in the rebuilt library containing any scavenged photos.
LN

AddressBook Hang after upgrade to 10.7.2

I have used AddressBook in 10.7 and upgraded to 10.7.1 seamlessly.
I mostly use it to sync from my Gmail contact. But recently after upgrade to 10.7.2 It says It support iCloud and I am no need to sync with Google anymore. ????
But from what I see all my contact from Google still there. While newly created contact on iCloud keep update in my AddressBook.
But it perform very strange. cannot search and sometimes hang up.
I can't remove my previous gmail account in preference because it disappeared. only iCloud is my current option.
Any helppppppp.
PS. I mostly want to have my Gmail contacts and iCloud in sync. If it both copied I can ensure everything have its backup online.

I have used AddressBook in 10.7 and upgraded to 10.7.1 seamlessly.
I mostly use it to sync from my Gmail contact. But recently after upgrade to 10.7.2 It says It support iCloud and I am no need to sync with Google anymore. ????
But from what I see all my contact from Google still there. While newly created contact on iCloud keep update in my AddressBook.
But it perform very strange. cannot search and sometimes hang up.
I can't remove my previous gmail account in preference because it disappeared. only iCloud is my current option.
Any helppppppp.
PS. I mostly want to have my Gmail contacts and iCloud in sync. If it both copied I can ensure everything have its backup online.

TS2972 Home Sharing with ATV stopped working after upgrade to iTunes 11

After upgrading to iTunes 11, my two PCs are no longer visible to Apple TV or the iOS Remote App. I went through all the steps in "Troubleshooting Home Sharing" http://support.apple.com/kb/TS2972 without success. In additions, I tried:
Turning Home Sharing off, then on again on both PCs
Re-created Firewall rules for iTunes
Ran a factory reset on Apple TV
Disabled iPV6 on the network adapter, based on a blogger's fix for an iTunes 10 problem
Some other observations:
Home Sharing was working with Apple TV an hour before I ran the updates for iTunes 11 and Apple TV.
The Apple TV and iOS Remote App are working together, so the network settings must be correct.
The PCs in question are running Window 8 Pro 64-bit and Windows 7 Pro 64-bit
The two PCs can see eachother's iTunes.
It seems likely this is an iTunes 11 issue, but upgrading ATV2 at the same time clouds the diagnostics.
I was just about to order two more Apple TVs, but now have second thoughts now that my ATV2 is just a doorstop.
Any suggestions?

You are not alone with issues related to the e1000e (but all they concluded was that reloading the module makes it work again):
https://bbs.archlinux.org/viewtopic.php?id=145564
It seems like this is more your issue:
http://permalink.gmane.org/gmane.linux. … devel/8932
But if none of those boot flags work for you, then there's not much you can do, and you'll have to write a script to reload the module each time after initial boot finishes I guess until the module gets fixed.
Also, power management of the PCIe interface causes the e1000e to shut off after a while as well (lots of people on CentOS noticing this):
http://serverfault.com/questions/226319 … ie-aspm-do
So you can use that boot parameter to stop that from happening, if that becomes an issue for you as well.

Problems with set up disc after upgrading hard drive

I am having problems starting up my Macbook after upgrading the hard drive from 80GB to 160GB. The new hd is SATA, a WDScorpio. The pins on the end look the same, and I've had no problem with the physical install. When I go to start up the Macbook, I get a gray screen and the "flashing manila file w/a question mark" icon. I load the disc while holding down the "C" key, and all that happens is the disc gets ejected. What am I doing wrong? I also have my hd backed up w/time machine in an external hd. Any ideas?

Turns out, my problem is a malfunctioning optical drive. My Macbook couldn't read the set up disc. This is the second time in a week that I have had this Macbook into the apple store for warranty repair work. Last week, It was a defective VGcable. Each trip to the Applestore is 115 miles round trip from where I live. I tried to get Apple to give me a new computer, but no dice. I even had a district manager in Boise Idaho hang up on me. It's too bad when they know they have a product which everyone loves, and wants to use. They can set the terms. How many things must go wrong before they just replace the @#$# thing? I bought the Macbook Feb 12th, so it's not that old. I have handled it with the utmost care. Anyway, I've tasted the forbidden fruit, and will continue to use Apple products. Thanks for your help. I'll probably have a much easier time with a computer that works. (knock on wood)

Sync hangs after upgrade to iTunes 9

After upgrading to iTunes 9.1.0.79 from 8.xx last week I have been unable to sync Outlook contacts and Calendar - sync hangs and never completes.
iPhone 3GS on 3.1.3
(No other changes made to laptop at the time - direct issue with upgrade to iTunes 9)
Spend 1:45 on phone with Apple Support last week - very helpful - but no fix, and frustrated. (Have case number) Removed all Apple Apps - reinstalled, looked for list of DLL's on my PC etc during the call.
Any new ideas to resolve will be gratefully rec'd, or fix from Apple.
Many Thanks.

I have very similar symptoms after upgrade to iTunes 9.1. During sync of Calendars (or if Calendars disabled, during iPhone backup step), Outlook hangs & sync never completes. Outlook stays hung, and hangs again if I kill and restart, until I reboot. Hugely frustrating.

Safari hangs After upgrade to 10.5.6

After I upgraded to 10.5.6 last night I have been unable to use Safari. Safari just hangs after imediately opening. Firefox works just fine. Anybody having this issue after the OS upgrade? I am at a loss of what to do.
Thanks,
Matthew

I had the same issue after instilling a security update. (Running 10.5.6 already)
Safari would simply hang when trying to load websites with external resources such as CSS and SWF files - Google lagging such resources, worked perfectly - But navigating to other websites would lock up the browser. To solve the issues I tried the following;
- Running software update again, installing everything missing.
- Downloading and reinstalling Safari manually
- Downloading and reinstalling newest version of flash.
- Downloading newest build of webkit - which also locked up.
- Rebooting (Doh)
Nothing of the above worked; then I found this thread and noticed one thing I had not tried - Resetting safari!
Started safari and hit ESC immediately to stop safari loading anything.
Safari -> Reset Safari -> Check all checkboxes -> Reset.
Success; this message is written using my new working Safari!
In hindsight I should have reset each of the options separately to narrow down the bug. But I was not in a debugging mood at the time.
Chris
Message was edited by: Benjaminsen

Printing problem with HP laserjet 1100A after upgrading to Mac OS Maverick

Good afternoon,
I have always been able to use my HP Laserjet 1100A with my iMac till I upgraded to Mac OS Maverick.
After giving a printing order just one order will be carried out.
In case I have 3 printjobs I have te restart the iMac twice to carry out all the print jobs.
I am using USB for connection.
When I use the printer with my Windows computer (Windows 7) there is no problem at all with the required printjobs.
I guess the driver Gutenprint v5.2.3 is the cause of the problem.
Is there a new printerdriver available?
Thanks in advance.
Fred

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I have provided the HP LaserJet 1100 All-in-One Printer series Support page.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Aperture 3 Hanging after upgrade and possible solution

In advance, sorry for the long post:
As many have reported already, I was also a user of Aperture staring at the beachball and finding my computer hanging completely up to the point I was ready to give it flight lessons for free. I might have done this to my MacBook Pro if I was not leaving for an overland trip to Capetown from the Netherlands in a Toyota Land Cruiser in 2 days. If you want to read about the trip: www.africaminded.com.
How did I solve the issue in my case? I hope it helps some of you.
*My aperture setup*
Before you go through all the steps below let me explain how my Aperture workflow was set up:
1. Projects in Aperture correspond to folders on my harddrives. The project folders in Aperture contain reference files to the fils on my harddrives. The folders on my harddrives have the same name as the projects in Aperture. Using the same name does not really matter much, except I find it easier to find images from aperture back on my harddrive without having to use aperture to find the images.
2. I do not have the images imported into an Aperture library because this alllows me to access the images with other applications than Aperture (Photoshop etc).
Preparations:
*Actions I took before I started with a clean Aperture:*
1. Launch Aperture with holding the shift key. This defers Aperture from processing images in the library. Tip from Apple website: http://support.apple.com/kb/HT3805
2. Show Keywords HUD and export the keyword list in a separate file onto the desktop
3. Create folder on desktop called "Exported Projects"
4. Drag project by project to the just created folder. Yes this is a painstaking long process and one I would have liked avoided but I did not find any other solution and needed one. Luckily I only had 44 projects to go through.
5. Close Aperture
6. Delete the user preferences
1. Quit Aperture if still running.
2. In the Finder go to ~/Library/Preferences. (The tilde "~" represents your Home folder).
3. Remove the "com.apple.Aperture.plist" file from the Preferences folder.
7. Move the user created presets, keyword lists, and so on...
1. Quit Aperture.
2. In the Finder, go to ~/Library/Application Support/Aperture.
3. Move the contents of this folder to your Desktop
8. Delete your old Aperture Library or move it to another harddrive. If possible do not empty the bin of your computer (just in case you need the library again - I did not after following all steps below).
9. Reinstall Aperture; Note: Make sure that you have your installation discs nearby before starting this.
1. Open the Applications folder.
2. Drag the Aperture application to the Trash.
3. Insert your Aperture installation disc and install Aperture.
4. When finished, choose Software Update from the Apple () menu to update your software to the latest version.
*Now your computer has a clean install of Aperture*
1. Launch Aperture
2. Show Keywords HUD and import the keyword list that you saved in a separate file on the desktop
3. Move the following files back into ~/Library/Application Support/Aperture:
1. Adjustment Chain Presets.plist
2. FileNamingPresets.plist
3. Metadata Presets.plist
4. MetadataSets.plist
4. Close Aperture and go to
Following the steps below allows you to keep all you metadata and rating as well. It is possible in Aperture 3 to read and import sidecar files containing metadata but this will not include the rating! So if you want to keep your metadata and your ratings, follow the steps below:
(*A) Importing Project*s
1. Launch aperture
2. File > Import >Library / Project
3. After selecting the exported project you want to import, confirm you want to merge the project
4. Which library should be used when a conflict is detected? Choose current library (and not the library/project you are importing).
5. Let Aperture take its time to merge the projects (depending on the size of the project you import this can take longer and you might see the famous beach ball for a few seconds). In the beginning it will look like Aperture does nothing or hangs again.
6. After merging the libraries are completed Close Aperture.
7. Launch Aperture and immediately select Window > Show Activity from the menu. Let Aperture process new previews (this should start automatically after opening Aperture). Show activity will give you an idea how far Aperture is when processing the images so you don't have to stress and stare at the spinning wheel in the bottom left corner.
8. After the processing has finished Close Aperture again to save the new previews and share them with iLife and iWork.
9. Repeat the above until you have imported all your projects. Remember to keep repeating step 6 to 9. This allows you to find out which project contains corrupted images or is corrupt and to deal with it separately. Importing all projects at the same time and then processing all pictures at the same time does not give you the opportunity to figure out how to get rid of the beachball!
*(B) What to do when images are corrupted in a project?*
In case you imported a project that was corrupted or contains corrupted images that causes Aperture to hang completely and slow down your computer to a complete halt:
1. Force quit aperture
2. Reopen aperture and immediately press the shift key after launching the program. Pressing the shift key stops Aperture from rendering/processing the images you imported from the "corrupted project".
3. Select the last imported projected (the one that contains 1 or several corrupted images and gave you the beachball again).
4. Delete the project and empty the trash in Aperture as well. Do not delete the master files associated with you referenced images.
5. Move the corrupted project into a folder called "Corrupted projects". Do not throw the corrupted project away - we will deal with this one later. Just make sure they are not part of the main library you are building.
6. Quit and launch aperture. Aperture should not be processing any images anymore as you already completed that with step 8 above.
7. Complete the importing of your projects following the exact steps above, skipping the corrupted project.
Ps. In my case I found 1 project with corrupted images.
*(C) What do you do with the corrupted projects?*
1. Make sure that Aperture is not yet running.
2. Double click the corrupted project and press the shift key to defer the processing of images. This will launch aperture and treat the project as an individual library.
3. Select all thumbnails and export masters to a new folder and select "Create IPTC4XMP Sidecar File" in the pulldown list where it says "Metadata" in the export window. You should now have all master images of this corrupted project and the sidecar files containing the metadata of these images in the same folder.
4. Quit Aperture
5. Press the Alt-Key/Option-Key and Launch Aperture. Aperture should now ask you which library you want to open. Select your Main Library that contains all the projects you imported following step 1-9 above.
6. Create a new project for the images you are going to import from step 3 of section C.
7. Import the images and move them to where you want them to have. Aperture should import the non-corrupted images including their metadata (as the sidecar file of these images is in the same folder as the images). All you have lost in this case is the rating and possibly the adjustment of these images. The IPTC data will be imported by Aperture in step 9 Section C. You could survive having to redo the rating manually. Redoing the adjustments is a bit of more work, sorry.
8. Quit Aperture.
9. Launch Aperture with pressing the alt-key or option-key and select your main library as in step 5 and select "Show Activity" from the menu. You are now back into step 7 of section A. Complete step7, step 8 and 9 of section A.
*D. Congrats*
1. When all projects have imported correctly delete the projects from your harddrive to gain space.
2. Delete the temporary Aperture library created in section C step 2.
3. Re-install plug ins that you might have moved in the preparation phase (if possible 64-bit versions if available)
Congrats. You now have a completely new and well functioning new Aperture 3 library that offers you all the new features and is very fast I should say. My machine: MacBook Pro 2.93GHz with 4GB Ram.
After you think you can trust Aperture again empty your bin to gain space on your computer.
How long did this take me? All in all about 3 days but not full time luckily. How many real corrupted images? None - something else in the project data was messing everything up.

WOW!
I'm REALLY impressed by your exhaustive and detailled description!
How long did it take to write? Sure longer than the import itself...
Thank you so much. I got a working import of Ap2 lib before but your description have me various hints for handling problematic or faulty projects.
Matt

Tpnotify with TPACK flag hangs after upgrading to Tuxedo 12c RP020

Similar Messages

Maybe you are looking for