TPY S1 Windows Button on Screen not Working

Hi,
After a driver update my physical windows key located on my screen (for use in tablet mode) does not work. Pressing it does not bring up the Windows 8 metro UI/start panel. Does anybody have a fix for this? It is a very useful and convenient button and it is a shame that it doesn't function properly.
Thanks.

Anyone figure out a fix? I had a screen problem and sent it away and it came back and wasn't working, so maybe it's a connector issue? I'm trying to figure out if it's a deal breaker before I send it back.

Similar Messages

Windows 10 Touch Screen not working?

Mine works partially. Control Panel>>Systems says I have no pen or touch screen. Touching the screen works just as if I were using the mouse. Instead of scrolling through the start menu, for example, scrolling with my fingers causes the tiles to relocate. This is what would happen if MS wrote only an onClick() function where they should have had onClick() and onTouch(). Surely they're not that incompetent. Well...

Hi I had the same problem and found the best solution for the computer. Although hp always recomends that you have the newest updates to keep your computer running, one oh hp's newest touch screen drivers is not compatible with windows 10. So your best bet at getting your multi-touch compatibility working on your touch screen again is to use the previous driver. So these are the steps that helped me solve this issue. Step 1: Press the windows start button + the "x" keyStep 2: Select "Device Manager" from the list of optionsStep 3: Click the drop down menu for "Mice and other pointing devices"Step 4: If you have 2 drivers there then you have found the correct driver (If there is only one I will include instructions on how to find the correct driver for your computer)Step 5: Select your touch screen driver from within "Mice and other pointing devices" and double click on it to bring up the advanced optionsStep 6: Click on the "Driver" tab from within that newly opened windowStep 7: Click "Roll Back Driver"(That should have reset to the last touch screen driver your computer had. If you have removed the driver that I had you should now only have one driver in the "Mice and other pointing devices" drop down menu and you should have a few new drivers in the "Human Interface Devices" drop down menu)Step 8: Restart your device so that the computer can configure the changes in driversIf all goes well your touch screen should work like new again Now for those who had a single driver in the "Mouse and pointing devices" drop down menu~Complete steps one and two like you had in your first attemptStep 3: Click the drop down for "Human interface Devices"Step 4 : Look for the driver labeled "HID-compliant touch screen"Step 5: Select the driver by double clicking on itStep 6: Click on the "Driver" tabStep 7: Click "Roll back Driver"If the device was successfully rolled back go ahead and restart your device to let windows configure the device changes.If worked like it was supposed to your touch screen should work the way you want it.

HT4528 power button and screen not working - is this fixable and where do I go?

Last night my phone was knocked out of my hand and fell hard on the sidewalk. It doesn't look broken, I have it encased in an Otterbox but I can no longer see my screen, where do I get it fixed and is it fixable? Also a couple weeks ago my power button stopped working. Where do I go to get this fixed or do I have to get a new phone? I didn't get the insurance as I never had an issue with my phones before this.

Hi dreamy2273!
I have a link that can help answer these questions for you:
Contact Apple for support and service
http://support.apple.com/kb/he57
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Print screen not working on windows 8 pro

Hello,
Need help!!!
I have upgraded from vista to windows 8 pro. I am trying to print screen but nothing seems to work (hp pc).
I have tried the following;
Windows button +print screen
Fn+ print screen
Ctrl+ print screen
Alt+ print screen
Ctrl+fn+ print screen
When I click Windows+ print screen it takes me into the control panel- system page.
Nothing else happens when I click on the other keys.
Hope you could help me with this issue.
Thanks in advance,
Cat

Hi Cat32,
I understand you are not able to print using shortcut keys.
I was just wondering if you installed the printer on your new Windows 8 Pro.
I would like to help but I do need to know the printer that you are using.
Here is a link to drivers and software help.
http://www8.hp.com/us/en/drivers.html
Please let me know if you require further assistance.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HT4623 iOS 6.1 no longer available because you are no longer connected to the internet- this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.

this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thanks

well in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone.

Audigy Platinum Ex Windows 7 SPDIF IN not working

Audigy Platinum Ex Windows 7 SPDIF IN not working? I have an old Audigy Platinum Ex that has served me well, until now when I have a new Windows 7 x64 PC (RTM). SPDIF IN no longer works, though everything else does (including SPDIF OUT). I've tried the current and beta drivers for the card, and no difference.
In Windows Vista x64 I could use ASIO drivers with my M-Audio ProFire 60 while using the Audigy for PC audio. Most often this was for skype, which I would set to use SPDIF IN/OUT which I then connected to the ProFires SPDIF OUT/IN. Using the ProFire mixing tool, I could control which mics and levels went to the Audigy while not interfereing with the ASIO drivers recording the mics. The ProFire also recorded the SPDIF OUT from the Audigy to caputre the person on Skype to their own audio track. This is a podcast producer's heaven, and I miss it!
If it's a known issue (SPDIF IN / Win 7), I've had this card through 4 PC upgrades and it's served me well enough I don't mind buying new. The Creative Sound Blaster X-fi Elite Pro looks to be the current version of my Ex - are there any Windows 7 issues currently that would stop me from using it in the role above? I will miss the FireWire port, a shame they dropped that.

Well basically it is possible, and I've found this out. Apparently Dell released a driver or something that allows it to work, but then only if you install a 3rd party modified xp version of the creative suite. I don't remember where I found it, but it was through google... Using some term including x-fi, dts, and vista.... Can't seem to find it now. Anyway, it had a download for the whole creative suite that was modified from the xp version for Vista, however it was buggy as hell, caused driver issues and blue screens, and ended up causing me to have to reinstall Vista altogether again. In other words, it's possible, but I don't recommend it until it's officially supported... Don't know when this will be yet... *crosses fingers*
Luckily I've got a dual OS system with XP too, and I switch to that when I want to use my Xbox 360... However due to Microsoft also being terrible in that department... I now get entertainment off of its 3 red lights... (For those of you who don't know, 3 red lights = hardware error. Sending into microsoft for repair typically is a 2 month process... I'm still waiting on my prepaid shipping box to arri've and it's been 4 days... Will be a similar wait to get it to them, 4-6 weeks for them to actually repair, and another week or so to get it all shipped back). Although even when the console worked, my dsl modem sometimes cut out when playing on Xbox li've and dropped signals, reported errors, etc.
What is with the companies producing technology nowadays? I just want to play Gears in 5. on Xbox li've... *cries*Message Edited by Supercoolyo on 07-22-20070:54 AM

I have triple pointers on PSE7 & Windows 8. Windows 7 solution does not work

I have triple pointers on PSE7 & Windows 8. Windows 7 solution does not work-can't find how to change DPI

Right click on your Desktop and select Screen Resolution
Then in the screen that comes up, click on Make Text or Other Items Larger or Smaller
Then move the slider under Change the Size of All Items to Smaller and restart windows 8

T61 LCD Screen not working at all !!!

Hi, i have :
1 - Thinkpad T61 6460 EF7
2 - Windows XP SP3
3 - Intel Centrino Pro Duo 2Ghz
4 - NVidia Quadro 140NVS
5 - 2 GIG of RAM
6 - Latest drivers and updates installed
I was working and suddenly :
1 - my screen started flashing red
2 - and then Blue Screen
3 - crash
4 - i can see the screen working but it shows nothing
what i did:
1 - i bought an external screen to see what's going on
2 - external screen works only in safe mode and not in the normal mode and the Thinkpad LCD Screen still not working
3 - i checked the BIOS ans in display Thinkpad LCD is checked
4 - i've done a R and R restore, the thinkpad LCD screen resrarted working
but
1- the screen seems blocked by sometimes
2- after reinstalling the laptop in a way to continue working on it
3 - in the end of the day red flash, blue screen and screen not working anymore
so please, is there any software solution or do i have a hardware problem ?
thank you in advance

I was referring to PC-Doctor bootable CD...
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-56222
As for Turbo Memory, I don't have enough experience with it to claim anything...but am tempted to point at the GPU as being the component most likely at fault...
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?

Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?

Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

Replaced iPod screen myself, screen not working. Will i be eligible to get a screen LCD repair from Apple ?

I dropped my ipod by accident and i decided to repair the ipod myself by buying a screen off eBay. I replaced the the screen and everything was working when i tested the iPod before screwing the backplate back on. When i closed the iPod, it had a white screen when i power up. I held the power and home button for 30 second and nothing happens. The power button still powers the screen on and home, and when i hold it down it powers off the iPod.Replaced iPod screen myself, screen not working. Will i be eligible to get a screen + LCD repair from Apple ?
Will i still be eligible to get a screen + LCD repair from Apple ?

No, you are not eligible.

Sony Vaio Pro 13.3 Touch: Touch screen not working

Hi, The touch screen for my Sony Vaio Pro 13 Touch suddenly stopped working two days ago and I have no idea how to fix it. I didn't install anything new before it stopped working, and I tried to install all the new drivers on the VAIO update but it still didn't work. I thought it might be because of Windows so I updated to Windows 8.1 today and it still does not work. On the PC info it even says" Pen abd touch: No pen or touch input is available for this display". but this laptop is supposed to have touch capability and it has been working up until now. Please help! My model number is SVP13215CDB. Do I need to install or update my driver?

Hi FlyingTortoise,
Was there any changes prior to touch screen not working? Like installing software or hardware? If not, then try using windows system restore to restore back to a date that you know when it was working. If that still does not resolve issue. Then we may have to put the unit back to factory condition to eliminate software related before servicing the unit for hardware.
Nick--

TOUCH SCREEN NOT WORKING XPERIA Z ,

Hi all, can anybody help please, the touch screen is not working on daughters Xperia Z. Loads ok & can power off using the volume + key & power button & then turns on but touch screen still not working, It hasn't been dropped & no liquid spilt on it, only 2 months old. Can't download anything support etc from Sony as it asks to enter the password to open the phone which she can't do as the touch screen not working.Is there another way or does it need to go back to the comapny for repair. It is contarct with VirginThanks in advance

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I'm sorry to hear. If the touch does not work, it's not much that you can do on your own more than performing a software repair to exclude software related problems. This can be done via our program Update service:
http://www.sonymobile.com/global-en/tools/update-service/
Download and install SUS, follow the instructions that appear.
Note that the personal data will be lost when performing this repair and if you cannot access the menu, you are unable to back up this data.
If the problem persist, I suggest that you contact your local support team to get information about how you should proceed in this case:
http://www.sonymobile.com/global-en/support/contact-us/contact-info/

IPhone 4 touch screen not working

iPhone 4 touch screen not working properly. Sometimes it activates icon itself. After updating to iOS 6.12, it stop working totally.

Good Morning S.GOPINADHAN,
I understand your iPhone screen is black and you are not able to turn it on. The article below will explain what to do when your iPhone is not responsive. I'll also include instructions on how to back up your iPhone when you are able to turn it on.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
https://support.apple.com/en-us/HT201412
iCloud: Back up your iOS device to iCloud
https://support.apple.com/kb/PH12520?locale=en_US
Regards,
- Judy

My speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
Anybody know of a way round this?

Hi @dnhowes ,
I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Was it the Nvram reset back to factory settings that you tried or a hard reset?
Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
I find that on the Lab printers when I am selecting different menus.
If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

TPY S1 Windows Button on Screen not Working

Similar Messages

Maybe you are looking for