TR Background processing question

To All
We currently receipt stock in MIGO and get a GR slip. Then we use LB10 to putaway using TO in Foreground. My question is what config do I need to set up to use TC in Background? What paperwork is generated to advise staff where to put stock if TO in Background is used? Is there a 'putaway' list when the background processing is selected.
We currently have no other warehouse stock strategies. (No fixed bin management, no capacity check, etc)
We currently use the material master default bin (which is printed on the GR slip) to suggest the putaway location.
I want to get away from using TO in foreground to speed up putaway processing
Regards
Darren

Darren,
TO or TC or both ?
For immediate TO creation:
In config.
LE \ WM \ Interfaces \ IM \ Define Movement Types
In the second table, according to the parameters you want e.g. Movement Type, set 'A' in the 'Immediate' column
Alternatively consider background generation (by prog. RLAUTA10) by setting per movement type.
In config.
LE \ WM \ Activities \ Transfers \ Set up Autom. TO creation
And step through the settings.
Regards,
Nick

Similar Messages

Question related to my previous "background process" question.

Hello Folks:
Can I start a "Notification Service Subscriber" process through the
normal startup procedure for other servers---i.e. by adding it to the
config(ubb) file. If so, can I implement the background process as two
different CORBA servers calling each other asynchronously to accomplish
the work. Please let me know if there is any other way to accomplish
what I have stated in the "background process" question.
Thanks,
Ram Ramesh
678-358-3581

Go to your forum preferences and set the email options. You may also need to unsubscribe from forums / topics you are currently subscribed to.

KKA2 Background processing question...

Hi all,
I can run KKA2 in background mode. I want to capture some of the values generated by the transaction and which are displayed on the results screen. Can I do that?
regards,
Mat

Hi Rich,
Happy new year!!! This is proving to be very difficult. I just want to roll up a serious charges from COSS and COSP for specific billing elements...but no matter what I do things don't seem to reconcile against the actuals displayed in KKA2. Got any pointers for me?
regards,
Mat

Apple Script Editor | Background Process | Question

Hi,
I recently found this chat site called www /dot/ omegle /dot/ com (The service randomly pairs users in one-on-one chat sessions where they chat anonymously using the handles "You" and "Stranger".) - and i was wondering how i could create a copy and paste routine to run in the background on safari while i do other stuff on Google Chrome or whatever.
Here is an example of my script so far:
repeat 10000 times
delay 4
          tell application "System Events" to keystroke "v" using command down
          delay 0.1
          tell application "System Events" to keystroke return
delay 1
          tell application "System Events" to keystroke (key code 53)
          delay 0.5
          tell application "System Events" to keystroke (key code 53)
          delay 0.5
          tell application "AppleScript Editor" to activate
          tell application "System Events"
key down {command}
keystroke (key code 14)
key up {command}
          end tell
          tell application "System Events"
keystroke "r" using {command down}
                    tell application "System Events"
keystroke "r" using {command down}
                              tell application "Safari" to activate
                    end tell
delay 3
                    tell application "System Events" to keystroke (key code 53)
delay 4
                    tell application "System Events" to keystroke "v" using command down
                    delay 0.1
                    tell application "System Events" to keystroke return
delay 1
                    tell application "System Events" to keystroke (key code 53)
                    delay 0.5
                    tell application "System Events" to keystroke (key code 53)
                    delay 0.5
                    tell application "AppleScript Editor" to activate
                    tell application "System Events"
key down {command}
keystroke (key code 14)
key up {command}
                    end tell
                    tell application "System Events"
keystroke "r" using {command down}
                              tell application "System Events"
keystroke "r" using {command down}
                                        tell application "Safari" to activate
                              end tell
                              delay 3
                              tell application "System Events" to keystroke (key code 53)
                    end tell
                    delay 0.1
                    tell application "System Events" to keystroke (key code 53)
          end tell
end repeat

Anyone?
I'm not trying to spam anybody - i just wan't to promote my band.

GUI_DOWNLOAD and background processing

Hello,
I have created a process which creates a file. this process uses GUI_DOWNLOAD to put the file on the users C drive or other directory on our network. The user wants to run this process in background and the program is returning a 6 (error unknown) from the GUI_DOWNLOAD FM. I was looking on SDN and found out the GUI_DOWNLOAD only works in foreground. You have to use OPEN and CLOSE DATASET statements to process in background. I am thinking about putting a button to denote foreground/background processing and using the appropriate statements to process the file. I will then have to get the file from the app server to a place will the user can get access to it.
first question - is there a FM to do a FTP from the app server to a directory on our network for the user to access?
second question - is this the right approach or is there something else that I should be doing.
thanks in advance for your help

Hi,
Yes, your right, GUI_DOWNLOAD wil not work in background mode, you need to place the file in Application server, here.
See the below link for a FTP program, use the proper commands(i do not know whether downloading the file is possible through the commands)
http://www.sap-img.com/ab003.htm
or else, write a small program which downloads the data from the application server, but it should run in the foreground
Regards
Sudheer

Crystal Reports VS 2008 "The request could not be submitted for background processing"

Hi,
I am going to try to explain this issue the best I can. Please let me know if you need any other information or have any ideas as I have exhausted my resources. We have an ASP.NET application that has highly formatted crystal reports in them that the users can export as PDFs. All reports export without a problem when the application is run off of our desktops. The reports use a sql server authenticated user, executing stored procedures, and each subreport is linked by the main parameter. We are using Visual Studio 2008 version 3.5 SP1 with Crystal Reports Basic for Visual Studio 2008 on Windows 7 Enterprise SP1. We have designed the reports in Crystal Reports XI Release 2 (11.5.12.1838) and imported them into the ASP.NET application. When trying to export the reports as PDFs from the development or production servers, we get the error message below for some, not all, reports:
System.Runtime.InteropServices.COMException (0x800002AD): Error in File C:\Windows\TEMP\KeyAccountProfile {9FA5C095-77A2-425D-AC6B-8BB66B435336}.rpt: The request could not be submitted for background processing. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
We have cleared the temp directory on the servers before exporting and are still receiving the error. We have installed Crystal Reports Basic Runtime for Visual Studio (10.5.2.0) on both servers. I have identified the underlying issue to one stored procedure/subreport that is causing the report to fail. The weird thing is, when we change the connection to point to development, the stored procedure/subreport runs fine for the report that generates an error when run from production, and the data is the exact same. I have tried rebuilding the subreport but the error still appears even though it runs fine for other reports.
I have been through the document below, and othe similar issues in the forums, but still have not found a resolution. I was trying to use the "modules" application put since this is an ASP.NET application I am unsure of which executable I should be looking at.
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33?QuickLink=index&overridelayout=true&36837934524320
Thanks in advance for your assistance,
Brad Hood
06-26-14
OK.. I did some more investigating on this today. I have found out when I move the sub report that generates the error under another sub report, the sub report in question runs without issue. But when I try and move the sub report that produces the error above any other sub report, the error still generates. Can this get any weirder.... FYI.. there is a total of ten sub reports on this report.

Hi Brad
I'm not sure that Modules would show us anything in this case, so let's try a few other things:
1) Make sure you are using SP 1 for Crystal Reports Basic Runtime for Visual Studio:
Crystal Reports for VS 2005 and VS 2008 Updates & Runtime Downloads
2) Seeing as this works on dev, this may be some db inconsistency so enabling the report option "Verify on 1st Print" will be a good idea.
3) Double check the database client and make sure the same client is used on dev and deployed systems. Actually I take back my Modules negative as this is where it may prove useful. Once you have the Modules logs, look at who is loading the crpe32.dll, then look at that process and see the client dlls.
4) Check the printer driver; see if there are any updates. Try a different printer driver.
Ten subreports is not too bad, though not that good either as you are loading the report engine with at minimum 11 simultaneous reports (each subreport is considered to be a report). If a subreport is in a details section and the details section returns a 100 records, you are running 100 + 1 reports. This may lead to memory issues, which may lead to the error.
If I was a betting man, I'd put most of my money on the printer driver (based on your last addition to your post). What ever money I had left would go to some database issue (be it actual data or client related).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

ABAP Custom Report (ALV Format) in Background Processing

Hi
I am not the hardcore ABAP Person. But want to know about the detail fact of the ABAP Custome Reports. The question is can we do the background processing for the ABAP Custome Report in ALV Format.
If Yes ..do we require to have any additional Function/code to get the spool in ALV Format. I saw the comments that the output will look like the mess.
Please share your comment or any useful documenation on this. We are in ECC 6.0
Thanks in advance..and yes it will be rewared by points.
Navin

You can use alv's in background using docking containers, but the display wont be interactive. If you search the forum you will see tons of threads which talk about running ALV's in background.
For the output to be interactive, you can run the report in foreground and do the data processing in background.
Refer this link:
Displaying ALV Grid in Background Job

Background processing in Flex

I have two questions here. But, I guess they both are related
1. I have a calendar application, where I display set of
events based on time for a day. I need to start a background
process to check if any of the events are scheduled for the next
half an hour and show the reminder to the user.
Like I mentioned, I believe that there should be a background
thread running to check the current day event's time against the
local time and display reminder.
2. Next question is, I have a search component, where the
user enters the text and clicks on the search to fetch the results
based on the text entered.
I need a little customizable behavior here, where I need to
fetch the results based on the user input automatically(without
clicking the search button) based on the time lag after the last
character entered.
Any help/views in this regard is highly appreciated.
Thanks In Advance,
Suresh.

Hi,
The issue is bcz. in background screen container is not recognized.
Change the code as follows:
SET PF-STATUS 'SCREEN_100'.
SET TITLEBAR 'xxx'.
*if program is run in background
CALL METHOD cl_gui_alv_grid=>offline
 RECEIVING
 e_offline = off.
IF off IS INITIAL.
 IF container1 IS INITIAL.
 CREATE OBJECT container1
 EXPORTING
 container_name = 'CC_ALV1' .
 ENDIF.
ENDIF.
CREATE OBJECT g_grid1
 EXPORTING
 i_parent = container1.
PERFORM prepare_field_catalog.
PERFORM exclude_button.
PERFORM display_alv.
Best regards,
Prashant

Request could not be submitted for background processing

Using Crystal Reports XI R2
 Using Visual Studio .NET 2005
 
 Here's the scenario. The client goes to run a report and specifies the filters they want for the report. We load a pre-built rpt with no saved data and pass the filters in to the report via the parameters. We then generate and export the report to another rpt file with saved data using the PULL method from the report itself. When the viewer wants to view the report the file (with saved data) is copied locally to the web server and the CrystalReportViewer control is pointed at the rpt with the saved data in it. In almost every case the reports come up fine and display in the viewer no problem. The error above (Request could not be submitted for background processing) tends to show itself in the CrystalReportViewer control whenever the report has large amounts of data (like 8 megs worth). I've tried everything I can find on this issue including the steps listed in the white paper for this issue.
 
 So just to be clear on the steps taken:
 1)If I take the saved rpt and open it in Crystal Reports itself then it works fine.
 2)If I point to the rpt with the CrystalReportViewer control in my development environment it works fine.
 3)I've run Process Monitor and there were a couple of access denied messages to one of the HKLM registry keys but I modified the permissions so those went away but the problem still remained
 4)As far as I can tell the report has no design issues. Nothing runs over any edges, no overlapping of any kind, the Font itself exists on the machine in question.
 5)Its not a dataset problem since the report is using the PULL method to generate itself plus the rpt with saved data is correctly generated its just showing the above error when trying to view it in the control.
 6)The client is using a WIndows 2003 server, with 4 Quad Core processors and 8 gigs of RAM and 100 gigs of hard drive space remaining (so hardware is not an issue)
 7)In code the ReportDocument object is inside a using statement (C# .NET) and only exist for the brief period needed to create the rpt with saved data. So they are getting closed and disposed of correctly. Also as pointed out above the rpt with saved data is already being generated correctly its just not displaying in the control.
 
 So to recap on a web server used by multiple people whenever a user tries to view a saved rpt file that has a large amount of data using the CrystalReportViewer control the error above tends to get generated even though the vast majority of the reports do display. I'm at a loss for what else to try to make the report display correctly in the control. Any thoughts would be helpful.

Make sure you are using SP6:
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
Runtime
msm:
https://smpdl.sap-ag.de/~sapidp/012002523100000634042010E/crxir2sp6_net_mm.zip
msi:
https://smpdl.sap-ag.de/~sapidp/012002523100000633302010E/crxir2sp6_net_si.zip
Other than that, I'd consider installing the CR designer - as a test, on the user machine and see if the designer can open the report.
Ludek

SAP BI 7 - Background process performance Issue

This question is about efficiency of dialog process compared to inefficiency of the background process and I want suggestions from SAP Basis/BI experts on this.
We have observed that our background processes on BI server are not running as efficiently as we would like them to run.
For example
DSO activation:
When I use Dialog mode for DSO Activation with 3 parallel processes, I can activate a certain DSO with in 15 seconds. But the same DSO and the same data package when activated using background mode with 3 parallel process takes about 15 minutes.(there are plenty of background processes available on the system when this activation is running). So dialog process runs 60 times faster than background process.
In BI 7 most of the operations can be executed only in the background parallel mode. And from the activation example we know that our background processes are not as efficient as dialog processes. It
is understood that in general the background processes will not be as efficient as dialog processes, but in our case the difference is a factor of 60. We want help to identify, why the background processes are not as efficient as dialog processes. What SAP Basis settings need to be changed to make them as efficient as we can. Any suggestion or help will be highly appreciated.

Hello Eswaran
Generally a dialog process is not faster by any means than a background workprocess. Nevertheless i trust you on your observations, so there must be some difference. I just did a small test, i ran SE16 chose a big table and selected 10000 rows, i did 3 tries in dialog and 3 in background. The results:
dialog: 10.2s, 9.4s, 9.6s
background: 26s, 24s, 24s
So even in my simple example the background execution took more time. The issue here is, that the resulting output (which is pretty large) had to be saved additionally in a spool (a total of 167 pages) when executed in background. The selection of the data certainly did not take more time in either case.
The most important difference between dialog and batch processes is the memory management. Dialog processes work with a shared memory segment (extended memory). Background processes have their private heap memory.
Nevertheless, background processes are not "slower" in general, not at all. You will need to observe closer, what your processes are doing. Maybe watching SM50 while running the DSO activation is enough to see it, maybe you need to trace a process. If you see large spools generated, or huge amounts of memory consumed, we might already have an answer.
Regards
Michael

How to deploy an app with servlet and background processing

i have a servlet with background processing. it has to run 24 hours a day.
but i have problem with shutdown (after 1-2 hours without user action). [9iAS 9.0.3.0, windows 2000]
i created for application seperate OC4J (in the EM) and i deployed it there. first time as war file, later as ear file (because there is possible to re-deploy only ear file).
but it seems that the servlets are not designated to run as a uninterruptible task.
the question is: how to deploy such (servlet + uninterruptible background processing) application in the 9iAS?
a) everything in the OC4J (then how to disable shutdown?)
b) servlet in the OC4J. where (and how) to install the rest of application?
b1) servlet in the OC4J + rmi/soap/... + standalone server?
what is the standard in the oracle world :) ?
thanks

Better to post your topic in the iPad in the Enterprise community.
This is the, "Using Mac App Store" forum and for the most part for troubleshooting the App Store.

Experience in ABAP OO and heavy background processing?

Hi,
we're planning to develop a new application with a (very) high part of background processing. We plan to use the ABAP OO. We also want to make a good OO-Design (with many SETTER and GETTER methods and so on). I'm afraid we will get a lot of "program to program" communication and we will atomize our application. Also it's sounds to me like a conflict with the stuff from the Performance-course BC490.
Has anybody experience with ABAP 00 and applications that normally designed for a "number cruncher"?
Thanks and regards,
Stefan

Hi Mariana,
I've started with two technical prototypes that have a very little business logic. One prototype is designed in the "good old" ABAP and one in the ABAP OO and a selfmade OO-framework from our company. This framework is very comforable and offers a lot of methods and superclasses. For vectors there is a own superclass. So for you question: We use a own object to pass the vectors.
Also we use the software objectif for the OOD. I've learned how important a good OOD is, before I started any coding.
My prototypes have a very simple business logic. They creates bills for 10.000 invoice recipient. The only feature is, that every recipient can have his own customizing to decide which items should be together on one invoice to a individual invoice date.
I must admit that the API in the OO prototype are more understandable, but for the performance I see still the follow bottlenecks with the I/O:
- When I instance a business object, all attributs are loaded into the memory. In the old ABAP I use only the required fields. So the "smelly" SELECT *-Statement is back again...
- A business-class (A) that have dependent business-classes (B1, B2, B3...BN) should instance his dependes objects with the first access the the class (A). When the classes (B1,B2...BN) has also dependent classes, this object should be instances (B1 has C1,C2,C3..CN), too. There is always a "vector"-class between this classes that notice the reference of his objects.In my prototype for example you have a invoice recipient.
In my prototype for example I have a class invoice recipient (class A). This recipient has a vector of bill-header (class B) and every bill-header has a vector of bill-items (class C). Between every of this classe is a vector-class that manage the references of the objects.
I've programmed this lazy (hope that this is the correct word that a OO-gurus use). This means I instance only the class A. If there is a call to a method from object A that need the information from the class B-objects, than i look if the reference of the vector-class for the B-Object is already available. When not I instance the vecotr-class and this reads all dependens object B.
So there is much more I/O than in old ABAP, after all.
However I'm a OO beginner.
Therefore I'm waiting that an OO-expert from our company take a look to my prototype coding and improve this for a better performance. I'm looking forward for some good tips. I will let you know when I've good some other nuts and bolts.
Perhaps SAP needs a OO-database instead a rational database, so that all GET-methods goes directly to the database to avoid a instance with all attributs in the memory of the application-server...
Many greetings from germany,
Stefan

AQ Callbacks - Blocking background processes and best practices.

We are running several queues within our company and one of them uses pl/sql callback functionnality.
Basically, several triggers can enqueue a message when underlying tables are updated. The goal of the callback is to "treat" those messages, which means dequeuing the messages and passing them to some procedure (determined through a confguration table and the type of message). I don't know if i'm clear enough on this but it is as important.
In general the mechanism works perfectly but we noticed in one of our databases that, after a relatively big amount of messages enqueuing (~ 500-1000 in one trasanction), there are numerous background processes blocked on system table SYS.AQ_SRVNTFN_TABLEI. In fact, the queue starts growing and messages are not dequeued anymore by the callback, that doesn't seem to be executed anymore at all.
We actually were also unable to re-compile the package that holds the callback procedure nor removing/adding the reference of the subscriber to the queue with DBMS_AQ. It would hang there forever...
We are running Oracle Database 10g Enterprise Edition Release *10.2.0.4.0* and the value of AQ_TM_PROCESSES = 0.
I don't necesseraly have a complete and clear view of how the queue mechanism works behind the scenes so forgive for some foolish things I could say :-)
Diagnosis:
After some research, it seems the backgrounds processes are blocked on the system table SYS.AQ_SRVNTFN_TABLE on some index for MSGID.
If I understand correctly how the system works, the callback gets executed for a specific MSGID as we use it in the callback procedure to dequeue this message.
I've also discovered that the default value for the WAIT dequeue option is FOREVER...
So my idea was that, for some reason, the callback tries to dequeue a message that does not exist in the queue and... waits forever for the message to "appear".
This at first seemed pretty unlikely to me: why would the callback be executed if no message with provided MSGID exists... then you start doubting :-)
Attempt to resolve:
We've decided to alter the WAIT option to not let the dequeue in the callback wait forever.
We have made some tests (outside the callback) with NO_WAIT and also with a wait of a few seconds. Both solution prooved right so we added a wait of 60s in the callback and added some tracing.
Since then, no more background processes seems to hang there and we are able to alter the callback procedure normally. But with the added tracing, we noticed an unexplained behavior with the execution of the callback:
- callback runs
- ORA-25263: no message in queue QUEUE_OWNER.MULTISRC_NOTIFQ with message ID B4FFD1115523A46EE040007F0100304F
- callback runs again and message is dequeued and treated correctly
The first oracle error happens fast, not after 60s as the WAIT option specifies.
Questions:
<li>Is the way the callback method is implemented correct (see code below) ?</li>
<li>Do we need to commit in the callback method ? What implies committing or not ?</li>
<li>How wouold you explain the behavior of the callback after setting the dequeue WAIT to 60s and why it does not actually wait for 60s ?</li>
<>
<>
<>
<>
The configuration of the queue and the callback is as follow:
- the type of the payload is SYS.ANYDATA
- an extra index is create on CORRID column
begin
 -- create queue table
 begin
 DBMS_AQADM.CREATE_QUEUE_TABLE(QUEUE_TABLE => 'QUEUE_OWNER.MULTISRC_NOTIFTAB'
 ,QUEUE_PAYLOAD_TYPE => 'SYS.ANYDATA'
 ,MULTIPLE_CONSUMERS => true);
 end;
 -- create and start queue
 begin DBMS_AQADM.CREATE_QUEUE(QUEUE_NAME => 'QUEUE_OWNER.MULTISRC_NOTIFQ', QUEUE_TABLE => 'QUEUE_OWNER.MULTISRC_NOTIFTAB'); end;
 begin DBMS_AQADM.START_QUEUE(QUEUE_NAME => 'QUEUE_OWNER.MULTISRC_NOTIFQ'); end;
 -- grant access to the queue to PDO
 -- add a subscriber to the queue and register the plsql to execute
 begin
 DBMS_AQADM.ADD_SUBSCRIBER(QUEUE_NAME => 'QUEUE_OWNER.MULTISRC_NOTIFQ'
 ,SUBSCRIBER => SYS.AQ$_AGENT('MULTISRC_NOTIFSUBSCR', null, null));
 DBMS_AQ.REGISTER(SYS.AQ$_REG_INFO_LIST(SYS.AQ$_REG_INFO('QUEUE_OWNER.MULTISRC_NOTIFQ:MULTISRC_NOTIFSUBSCR'
 ,DBMS_AQ.NAMESPACE_AQ
 ,'plsql://PDO.PO_NOTIFY.MULTISRC_NOTIF_SUBSCRIBER?PR=0'
 ,HEXTORAW('FF')))
 ,1);
 end;
end;
create index queue_owner.multisrcq_corrid on queue_owner.multisrc_notiftab (CORRID)
The callback procedure is as follow:
procedure MULTISRC_NOTIF_SUBSCRIBER(context raw,
 REGINFO SYS.AQ$_REG_INFO,
 DESCR SYS.AQ$_DESCRIPTOR,
 PAYLOAD raw,
 PAYLOADL number) is
 L_METHOD constant varchar2(50) := 'MULTISRC_NOTIF_SUBSCRIBER';
 R_DEQUEUE_OPTIONS DBMS_AQ.DEQUEUE_OPTIONS_T;
 R_MESSAGE_PROPERTIES DBMS_AQ.MESSAGE_PROPERTIES_T;
 V_MESSAGE_HANDLE raw(16);
 O_PAYLOAD ANYDATA;
 cursor C_TREATMENTS(P_ENTITY in varchar2) is
 select T.MNOT_PROCEDURE_C
 from TA_GEN.MULTISRC_NOTIF_TREATMENTS T
 where T.MNOT_ENTITY_C = P_ENTITY
 and T.MNOT_BEGIN_D < sysdate
 and ((T.MNOT_END_D > sysdate and T.MNOT_END_D is not null) or
 (T.MNOT_END_D is null))
 order by T.MNOT_PRIORITY_N asc;
 WK_CORRID varchar2(128);
 WK_ENTITY TA_GEN.MULTISRC_NOTIF_TREATMENTS.MNOT_ENTITY_C%type;
 WK_PROCEDURE TA_GEN.MULTISRC_NOTIF_TREATMENTS.MNOT_PROCEDURE_C%type;
 CT_EXEC number(2) := 0;
begin
 -- DGH: 15.12.11 / added a wait of 60 seconds for dequeue to avoid infinite waiting (default is FOREVER)
 R_DEQUEUE_OPTIONS.WAIT := 60;
 -- dequeue message
 R_DEQUEUE_OPTIONS.MSGID := DESCR.MSG_ID;
 R_DEQUEUE_OPTIONS.CONSUMER_NAME := DESCR.CONSUMER_NAME;
 DBMS_AQ.DEQUEUE(QUEUE_NAME => DESCR.QUEUE_NAME,
 DEQUEUE_OPTIONS => R_DEQUEUE_OPTIONS,
 MESSAGE_PROPERTIES => R_MESSAGE_PROPERTIES,
 PAYLOAD => O_PAYLOAD,
 MSGID => V_MESSAGE_HANDLE);
 -- extract entity name
 WK_CORRID := R_MESSAGE_PROPERTIES.CORRELATION;
 WK_ENTITY := SUBSTR(WK_CORRID,
 INSTR(WK_CORRID, '##') + 2,
 (INSTR(WK_CORRID, '##', 1, 2) -
 INSTR(WK_CORRID, '##')) - 2);
 -- execute treatment(s)
 open C_TREATMENTS(WK_ENTITY);
 loop
 fetch C_TREATMENTS
 into WK_PROCEDURE;
 exit when C_TREATMENTS%notfound;
 execute immediate 'begin ' || WK_PROCEDURE || '(:MSG); end;'
 using O_PAYLOAD;
 CT_EXEC := CT_EXEC + 1;
 end loop;
 close C_TREATMENTS;
exception
 when others then
 if C_TREATMENTS%isopen then close C_TREATMENTS; end if;
 PO_NOTIFY.TRACE_MULTISRC_NOTIF(L_METHOD,
 sqlerrm,
 DESCR.MSG_ID,
 R_MESSAGE_PROPERTIES.CORRELATION,
 WK_ENTITY,
 WK_PROCEDURE);
 rollback;
end MULTISRC_NOTIF_SUBSCRIBER;

Helping you with the specific issue is going to be difficult without direct access to the servers but given the importance this system seems to have to your business why are you not running on a fully supported version (10.2 has been in extended support for more than 6 months) and even in the current configuration not patched to 10.2.0.5?
My instinct would be to focus on moving to 11.2.0.3 as quickly as possible with a corresponding change to a current operating system version if your O/S is similarly out of date.

Some background processes getting killed abruptly

Hi,
We have an E-Biz database and sometimes users complaint that some of the forms/JSP pages are not working fine. When i check the alert log, i find the following error messages which are marked as non critical.
Thu Oct 21 06:42:41 2010
Non critical error ORA-48913 caught while writing to trace file "/db1/ora1211/db/tech_st/11.1.0/admin/RGDB_orargpdb/diag/rdbms/rgdb/RGDB/trace/RGDB_ora_23488
.trc"
Error message: ORA-48913: Writing into trace file failed, file size limit [10485760] reached
Writing to the above trace file is disabled for now on...
Thu Oct 21 07:25:31 2010
ORA-00060: Deadlock detected. More info in file /db1/ora1211/db/tech_st/11.1.0/admin/RGDB_orargpdb/diag/rdbms/rgdb/RGDB/trace/RGDB_ora_26495.trc.
Thu Oct 21 09:24:04 2010
When i checked the background processes, mmon and mmnl processes were not running. When we restarted the database, everything started working fine.
this problems keep coming occasionally. Any help will be appreciated.

Dear muneer.uae,
SHUTDOWN: waiting for logins to complete.&
PMON failed to delete process, see PMON trace fileWell i think those are enough for you to understand the problem but the important thing here to diagnose is the "deadlock". First of all forget about everything and answer the question "do you know what is a deadlock?". If your answer is no, please go to the http://tahiti.oracle.com and search for deadlock.
The problem is not the Oracle database, is the application that you are currently using. You have nothing to do about the suicide of the PMON and if you can not solve it by your own than you need to create an SR call.
Background processes "normally" do not kill theirselves.
Regards.
Ogan

Exclude a server from background processing of a job

I have a background job that runs slowly on only the Central Instance on the database server host. The 6 other application servers run the same job in half the time. How can I configure this job to run on all but one application server? Is there some kind of background group that can be designated? How can I change the background processing priorities?

Hi,
Set all btc jobs on CI to class A ? ( make sure you plan as B or C for this job)
This should handle your both questions:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/ef/2c513897110872e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c4/3a7f53505211d189550000e829fbbd/frameset.htm
switch opmode temporary if needed:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c4/3a5f1f505211d189550000e829fbbd/frameset.htm

TR Background processing question

Similar Messages

Maybe you are looking for