Tr SQVI RESULTING IN ERROR MESSAGE.

Tr SQVI is executed and table join selected and enter , it gives the following error ( The current application triggered a termination with a short dump ).
what is the solution , pl let know.

Hi,
you need to have a look at that short dump (transaction ST22). You should see where it dumped and what the reason was.
Cheers

Similar Messages

Attaching USB External Drive Results in Error Message

I hope this is the right forum to seek help on this issue, and I hope someone can help...
I have a 500 gig external hard drive hooked up to my AEBS. Because the issue I describe at the forum topic below continues, I access it by going to the "Go Menu" and choosing "Connect to Server."
http://discussions.apple.com/thread.jspa?threadID=1255400&tstart=0
Yesterday, I tried to connect the drive directly to my Macbook Pro, and it did not appear to mount (normally a little globe icon would appear on my desktop, this time it did not.) So I navigated to "/volumes" and found what appeared to be the icon I was seeking that would allow me to open the drive. However, when I try to open it, I get the following error message:
"500 gig could not be opened because the original item could not be found."
At that point, I have 3 options:
Delete Alias
Fix Alias
Cancel
Attempting to delete the alias results in a message stating I do not have sufficient privileges for such a maneuver. Attempting to fix the alias puts me into my finder/file directory as if I'm supposed to navigate to a file.
Other interesting fun:
* The drive appears in Disk Utility when I plug it into my Macbook Pro, and I can mount, unmount, and eject it there.
* In Disk Utility, it says that the file structure is "Mac OS Extended (Journaled)" - which is how I formatted it when I first got the drive and plugged it into my Macbook Pro.
* When I "get info" on the icon in "volumes", it says that the owner is "system."
* When I connect to the drive via AEBS and choose "get info" on the icon, it says that it is formatted as "windows file sharing."
* My privileges when it is routed through my AEBS say I can "Read & Write."
I have searched this error message on the 'internets' and in this forum, but the hits I encounter seem to involve connecting to Windows servers with a Mac.
As you can probably tell, my level of computer knowledge is only about enough to get me in trouble. Any help or direction is appreciated..

Never found or heard an answer for this. Since I could access the drive wirelessly through my router, I ended up copying everything over to my laptop (50+ Gigs - took HOURS), and then reformatted the disk with Disk Utility. I can now access it by hooking it directly into the laptop. I'm now moving everything back and setting this topic to answered.

Cannot install itunes 10.6 to my windows 7 computer. Have tried several times, completely unistalled several times, all with same result. Error message that starts "An error occurred during the installation of assembly 'Microsoft VC80 CRT. type="win 32"

Keep getting the following error message when I try to instal itunes 10.6. An error occurred during the installation of assembly 'Microsoft VC80 CRT.type="win 32". version = "8.0 50727.61 95". public Key token = ""1fc8b3b9a1e18e3b." processor architeture = "x86". Please refer to help and support for more information.
HRESULT:0x80073712
The program then acts like it is still trying to load, but then I get another message later which reads:
Service 'Aple Mobile Device' failed to start. verify that you have sufficient privileges to start system services.
any suggestions?

HRESULT: 0x80073712
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80073712, or some other number? (If they're another number, what number are you getting?)

Installing update resulted in error message MS VCR80.dll not found, Apple mobile device failed to start

Can you help with error message on installing itunes on Windows XP: error message MSVCR80.dll not found. Apple Mobile Device failed to start. Error 7 Windows error 126.
Deleting itunes and reinstalling does not fix it.

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

Converting NEF (Nikon RAW) to DNG results in error message

I'm trying to convert the NEF (raw) images off my Nikon d90 to DNG to import and work with in PS CS2. Using the DNG Converter tool, having made my settings and pressing "Convert", I get an error for all the 54 files in the selected folder. "An error occurred when the file was analyzed" (roughly translated). DNG Converter settings: JPEG preview: Medium size Compression: Lossless compression Keep Raw image Do not embed Raw image I tried with all the different settings though and get the same error message. I was able to convert the images to JPEG with Nikon's native tool, so I thought the NEF files were alright, but it seems something about them is corrupted? I'm on a one year old Dell Inspiron 1721 with an ATD processor with Vista Home Premium (32bit) and a legal copy of Photoshop CS2.

The DNG converter version was 3.7. I downloaded the version that was listed under Photoshop CS2 here: http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows since that's the version I have.
Tried downloading & installing 5.4 and everything works like a charm.
Sorry for the trouble, it was that list that confused me, thought it wouldn't work with the later version.

Fact tables are resulting in error message

hello experts;
I am trying to create a mock-up report in OBI Answers and somehow Im having a problem with metric columns. When I pick any metric column then I get the: *(No Results: The specified criteria didn’t result in any data)*
I have doubled checked the rpd; the schemas btn the dimension and fact tables looks ok to me. I have tried union with another subject area, I get the same error. Anyone with an idea why fact tables are not collaborating with dimension tables?
will appreciate your help

In case if you are not able to see the logs,
follow this
Saving SET VARIABLE LOGLEVEL=2,DISABLE_CACHE_HIT=1; in a report
Mark correct or helpful if it helps,
Regards,
Veeresh Rayan

Attempting to Manage User Profile service results in error messages

Hello folks. I've been working on this issue for a bit now, and have searched a number of different ways. Everything I find as a result says "do an iisreset" as the only solution - I've done multiple iisresets and rebooted the server at least twice.
I've been working on setting up the User Profile service and User Profile Synchronization service. After a good bit of troubleshooting, I got the Sync service started successfully; I then decided to attempt to get to the user profile service settings
to begin setting it up for mysites. When selecting the service to manage it, I get the generic error in the browser, with the correlation ID which points me to these errors in my logs (as provided by ulsviewer, love that app)
UserProfileServiceUserStatisticsWebPart:LoadControl failed, Exception: System.IO.FileLoadException: The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
at Microsoft.Office.Server.UserProfiles.UserProfileConfigManager.InitializeIlmClient(String ILMMachineName, Int32 FIMWebClientTimeOut)
at Microsoft.Office.Server.UserProfiles.UserProfileConfigManager..ctor(UserProfileApplicationProxy userProfileApplicationProxy, Guid partitionID)
at Microsoft.SharePoint.Portal.WebControls.UserProfileServiceStatisticsWebPartBase.LoadControl(Object sender, EventArgs e)
UserProfileServiceAudienceStatisticsWebPart:LoadControl failed, Exception: System.IO.FileLoadException: The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
at Microsoft.Office.Server.UserProfiles.UserProfileConfigManager.InitializeIlmClient(String ILMMachineName, Int32 FIMWebClientTimeOut)
at Microsoft.Office.Server.UserProfiles.UserProfileConfigManager..ctor(UserProfileApplicationProxy userProfileApplicationProxy, Guid partitionID)
at Microsoft.SharePoint.Portal.WebControls.UserProfileServiceStatisticsWebPartBase.LoadControl(Object sender, EventArgs e)
UserProfileServiceImportStatisticsWebPart:LoadControl failed, Exception: System.IO.FileLoadException: The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
at Microsoft.Office.Server.UserProfiles.UserProfileConfigManager.InitializeIlmClient(String ILMMachineName, Int32 FIMWebClientTimeOut)
at Microsoft.Office.Server.UserProfiles.UserProfileConfigManager..ctor(UserProfileApplicationProxy userProfileApplicationProxy, Guid partitionID)
at Microsoft.SharePoint.Portal.WebControls.UserProfileServiceStatisticsWebPartBase.LoadControl(Object sender, EventArgs e)
So far, I'm finding nothing that points to any further troubleshooting past "do an iisreset" or "check that the FIM services are running". I've done plenty of iisresets and the FIM services are running.
Are there any suggestions for this that aren't just doing an iisreset, because that has not fixed it for me...

Ok so I was able to fix the issue.
I installed the latest CU package (currently April 2012) available here:
http://technet.microsoft.com/en-us/sharepoint/ff800847
after it installed, I rebooted the SP server, then ran the SP Products Configuration Wizard, then rebooted again.
Next, I removed the User Profile service I had previously created, then recreated everything following the instructions here:
http://sharepointgeorge.com/2010/configuring-the-user-profile-service-in-sharepoint-2010/ to the letter (Gotta make sure you do iisresets at the right places!).
After all this, my issues went away and I was able to proceed with setting up MySites.

What to do if Add Header/Footer tool and Bates Numbering tool both get error message? File too big?

Hello,
I'm working with a 700 page / 103 Mo PDF that I need to put page numbers on. Both the Header/Footer tool and the Bates numbering tool result in error messages.
'An error occurred while retrieving the contents of the page.'
I suspect this is because the PDF was made by assembling 30 smaller PDFs via Preview and never down-sized during the process. I would imagine that would create a kind of clunky file. Or maybe it's simply the size that is overloading the software.
Does anyone have any advice on a fix or a workaround for this? I need to put page numbers on. I really want to put them on the composite PDF (going back to the 30 original PDFs would be a real headache for a lot of reasons.)
Thanks!

Hi Eliza,
Your suspicion is right. It might be possible that assembling different pdf's together created from different applications might be the issue.
Try printing the pdf to Adobe pdf printer and then try adding the page numbers and check.
Regards,
Rave

Financial Reports error message Java API can't connect to olap

Hi,
On version 11.1.1.3, after reapplication of 11.1.1.3 because of other problems with shared services, get the following message on the diagnostics for the financial reporting server.
Launch external checker with next command: E:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** hypolap.msj.org http://hypapp2.msj.org:13080/aps/JAPI
Error: Result: -1; Error message: Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials
Recommended Action: Make sure external checker is working.
Financial reports over the Web can not connect to the essbase server. Financial reports through the studio works fine. Any suggestions how to troubleshoot or resolve the issue with the login credentials for the Java API to essbase?
Anne

Things to check -
1) Does the user you specified in the connection have the role OLAP_USER
2) Does the user you specified in the connection have access to an OLAP schema (analytic workspace or CWM2 ROLAP schema)
3) Have you installed the correct JDBC files from your database instance into the BI Beans JDBC directory
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

I am getting intermittent error messages "Runtime Error" when clicking on links

Now and then, and I can't tell what causes it, I click on a link and get a page that gives me the incomprehensible message below with "Runtime Error" as the tab. I did recently click on a link that gave me a blue screen with messages that shut down my computer, but I have run a virus checker since then that found nothing. I also recently upgraded from windows xp to windows 7. I have never seen the problem before then.
Server Error in '/' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>

Hello babs313,
What operating system are we working with?
What make / model of the computer are we using?
Try running the Mr Fix iT application on this troubleshooting article and post back your results.
Error message when you run Windows Defender: "Error Code 0x800106ba"
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Mac OS X keep getting error message when extracting files for trail version of CS5 master suite.

Mac OS X keep getting error message when extracting files foUsingr trail version of CS5 master suite. I deleted all Adobe files and tried again several time and keep getting the same results.

What error message are you receiving? What version of Mac OS do you have installed?

SMS... iPhone spontaneously adding 1 to phone numbers, resulting in error

I have all of my contact phone numbers stored as 10 digit numbers.
Recently, when texting to some of these contacts, the iPhone has started adding the extra digit "1" before the phone numbers, resulting in error messages, and undelivered text messages.
What gives? Has anyone else had this problem?

you can do this with apple script.
Paste the following into Script Editor and run it.
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
tell application "Address Book"
set NP to number of people
repeat with i from 1 to NP
set pers to person i
repeat with cphone in phones of pers
if value of cphone is not equal to "" then
set cur_phone to value of cphone
set value of cphone to "1" & cur_phone
end if
end repeat
end repeat
end tell</pre>

Getting error message that states itunesexe has been set to run in compatibilty mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it .How do i turn off compatibility mode?

recieved error message that states" itunes exe has been set to run in compatibility mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it. How do i access compatibility mode and turn it off ? Believe i have Windows 7.

Try the following document, only be sure that none of the boxes in the compatibility tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

After my phone was fully submerged in water, I'm getting the overheating error message but the phone is not hot at all. Is this the result of the phone being damaged by the water?

I dropped my iPhone 4S in my friends pool. It was fully submerged for about 30 seconds.
We took it out, dried it and put it in rice. After 24 hours I checked the phone. It turns on and runs smoothly. It connects to the computer and syncs perfectly. But after a couple minutes of use I get an overheating error message. But the phone is not hot at all.
Is this the result of the phone being damaged by the water? Is there any way around this? The phone works perfectly fine and isn't overheating at all.
What can I do?

Despite the error that I get after a few minutes, the phone does work fine.
But by most peoples definition, the phone isn't working.
I just want to know if anyone has been in my boat and if the overheat message without the phone overheating can correct itself or if it goes away with sufficient drying of the phone.
I know its slim, but I figured I'd ask.

I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord). The result is that the project would not load

I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord). The result is that the project would not load in the edit Projects window. I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
I have contacted apple support and they tried to do a few things... to no available.
With my limited knowledge of file structures I assume that the header file must be corrupt.
Is there a 3rd party utility that can decompile and fix the file structure so it will load properly. I've been working on this project since june and would hate to have to redo the whole thing again.

I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord). The result is that the project would not load in the edit Projects window. I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
I have contacted apple support and they tried to do a few things... to no available.
With my limited knowledge of file structures I assume that the header file must be corrupt.
Is there a 3rd party utility that can decompile and fix the file structure so it will load properly. I've been working on this project since june and would hate to have to redo the whole thing again.

Tr SQVI RESULTING IN ERROR MESSAGE.

Similar Messages

Maybe you are looking for