TR with WAD web templates

Dear All,
       I need to collect WAD web templates in a TR.
       Please suggest me the best way to collect them.
       I was trying with transport connection option in RSA1. But it looks like not all the web items are getting collected.
       Thanks in advance.
Regards,
Anwar

Hi Anwar,
Before collecting the objects into a transport, we should follow the sequence, if you will miss the sequence then you are unable to collect the objects into transport request.
Please let me know are you following the sequence while collecting the objects into transport request. if you will not follow the sequence,first collect the objects in a sequnece.
Step1--> Once you have that, transport your base level objects - Infoobjects, DSO & Cube structures.
Step2--> Then you can transport the Update rules, transfer rules, transformations for the above..
Step3--> And finally, the infopackages and DTPs.
By using RSA1--> choose -->Transport connnection option in modeling tab. And Drag the objects which you want to collect into transport.
Please let me know, stilly ou are facing any issues.
Thanks,
Premalatha.C

Similar Messages

The changes made in the WAD web template is not replicating on web browser

Hi,
We are using BI 7.0 WAD. Suppose if i create a one web template and if i run it ...it is working fine.
If i change the present web template and if i do change anything on the present web template and if run this web template it is giving the previous result....it is not reflecting the present changes.
The changes made in the WAD web template is not replicating on web browser result.
I went to transaction SMICM, then choose "Goto" from the top menu. From there, go to HTTP Server Cache, then choose Invalidate, then choose Global in system. With this thing also it didnt slove.
thanks

Clear your browser cache also and see if the changes are visible.....
Arun

About the top N condition in WAD web template

Hi all experts,
I'm facing a problem in my WAD web template. Hope you guys can give me a hand.
In my web template, there is analysis item A and B.
Table A are used to display top 3 customers(char) with highest purchase rate % (KF), I'm using top N condition to select top 3 customers.
And table B is to show all customers with purchase rate, sorted from highest purchase rate to lowest (logic:- sort the KF(purchase rate) in descending order)
The problem is when there is many customers with purchase rate = 100%(more than 20 customers), then for the 1st-3rd customers of table A and B, the selected and sorted customers results are not the same, shouldn't that they should be identical for the 1st three rows as they are trying to show customers with highest purchase rate? even though table A is using top 3 condition and table B is using descending sorting for purchase rate.
For example:- Top 3 customers in table A and all customers in table B
Table A
Customer       Purchase rate
c3                  100%
c1                  100%
c5                  100%
Table B
Customer    Purchase rate
c2              100%
c3              100%
c4              100%
c1              100%
c5              100%
c6              81%
c7              58%
In this example, table a and b have selected different customers for 1st to 3rd position, i'm trying to make them showing identically. Any suggestion?
Perhaps you guys can give me some idea on how does the top N condition determine the TOP 3 customers if there is many customers with 100% purchase rate as in this case.
Thanks a lot,
Eric
Edited by: Eric Tan on Aug 12, 2008 10:49 AM

When u create conditions, you have tab called CHARACTERISTIC ASSIGNEMENT.& other is GENERAL..which is like in what way you want to create conditions i.e based on which characteristic or whole characteristic in rows etc...you try choosing those option in that tab, so that you can find some ideas..

Changes made in the WAD web template is not replicating on web browser

Hi,
We are using BI 7.0 WAD. Suppose if i create a one web template and if i run it ...it is working fine.
If i change the present web template and if i do change anything on the present web template and if run this web template it is giving the previous result....it is not reflecting the present changes.
The changes made in the WAD web template is not replicating on web browser result.
Thanks in adv
pinky

Just to add.
WAD templates are stored as HTML in the HTTP cache.
Whenever you make changes to the template - it is good practice to delete / invalidate the HTTP Server cache.
This can be done from
SMICM --> Goto (menu bar ) --> HTTP Server cache --> Invalidate --> GLobal
ust to make this thread complete..
However this is usually done for 3.x web templates since they run off the ABAp stack - not too sure about the JAVA stack - guess portal cache has to be cleared too..

Custom parameters in URL with BexWeb (WAD/Web template)

Hello all,
I've been reading a lot in this forum, but I haven't been able to do what I want to do.
I want to insert a custom parameter in the URL as we made with BW 3.5, and then read it.
I finally think it's something about the command SET_VARIABLES_STATE, but I cannon get it work.
In the template I have only been able to insert commands under the Web Template element (either before first display and before first rendereing, both with the same results). I've also tried several types of commands.
The XHTML generated is as follows:
                <bi:WEB_TEMPLATE_ACTIONS type="COMPOSITE" >
                    <bi:ACTION_BEFORE_FIRST_RENDERING type="COMPOSITE" >
                        <bi:INSTRUCTION >
                            <bi:SET_VARIABLES_STATE >
                                <bi:VARIABLE_VALUES type="ORDEREDLIST" >
                                    <bi:VARIABLE_VALUE type="COMPOSITE" index="1" >
                                        <bi:VARIABLE value="ZSESION" text="ZSESION"></bi:VARIABLE>
                                        <bi:VARIABLE_TYPE type="CHOICE" value="VARIABLE_INPUT_STRING" >
                                            <bi:VARIABLE_INPUT_STRING value="ZSESION"></bi:VARIABLE_INPUT_STRING>
                                        </bi:VARIABLE_TYPE>
                                    </bi:VARIABLE_VALUE>
                                    <bi:VARIABLE_VALUE type="COMPOSITE" index="2" >
                                        <bi:VARIABLE value="ZSESION2" text="ZSESION2"></bi:VARIABLE>
                                        <bi:VARIABLE_TYPE type="CHOICE" value="VALUE_SET_VARIABLE" >
                                            <bi:VALUE_SET_VARIABLE value="ZSESION2"></bi:VALUE_SET_VARIABLE>
                                        </bi:VARIABLE_TYPE>
                                    </bi:VARIABLE_VALUE>
                                    <bi:VARIABLE_VALUE type="COMPOSITE" index="3" >
                                        <bi:VARIABLE value="ZSESION3" text="ZSESION3"></bi:VARIABLE>
                                        <bi:VARIABLE_TYPE type="CHOICE" value="TEXT_VARIABLE" >
                                            <bi:TEXT_VARIABLE value="ZSESION3"></bi:TEXT_VARIABLE>
                                        </bi:VARIABLE_TYPE>
                                    </bi:VARIABLE_VALUE>
                                </bi:VARIABLE_VALUES>
                            </bi:SET_VARIABLES_STATE>
                        </bi:INSTRUCTION>
                    </bi:ACTION_BEFORE_FIRST_RENDERING>
                </bi:WEB_TEMPLATE_ACTIONS>
I pass it in the URL this way:
&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING=010/2010&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=ZSESION
Also, I want to read it using the ABAP interface IF_BICS_CONS_WEBITEM_CUST_EXIT, method EXECUTE.
I wonder if it's possible that, once the command parameter works, that the value of my parameters arrives here in the I_XML in parameter.
I've also read about standard class CL_RSWR_SERVICES, but I don't really want to debug a std class and even less to enhace it ...
PD: This variable ZSESION does not exist in any query, and we don't want it to exist, as it's only necessary for integration in the intranet.
Thanks to all,
Rafa
Edited by: Rafael LLabrés Pérez on Sep 28, 2011 3:54 PM

Hi,
It is possible in 7.0, but unfortunately it is a lot more complicated than i 3.x. There are quite a few examples here:
http://help.sap.com/saphelp_nw70/helpdata/en/43/ef05462480025ae10000000a1553f7/content.htm
I used it in a case where I wanted to embed a Web template in a BPS application and pass characteristic filters from the BPS application to the web template - similar to your requirements. Basically you need the following just to restrict one characteristic :o(
&BI_COMMAND_1-BI_COMMAND_TYPE=SET_SELECTION_STATE
&BI_COMMAND_1-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF_1=DP_1
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1=SELECTION_INPUT_STRING
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1-SELECTION_INPUT_STRING=PDS06
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-CHARACTERISTIC=0D_PH2
I could only get it to work with one characteristic and I suspect, that the reason is that the URL simply gets to long (very quickly). You have to repeat the above for every characterstic you want to use :o(
Hth,
Jacob

How to build Information button in WAD, web template

Hello friends,
I am working in BI 7.0 WAD
well i designed a query in Bex and it is linked with portal , so if i run the query it shows the result in Portal
On portal while executing the query if i filter on some characteristics, then there is a button on Upper left named INFORMATION--- so if i click that it will give me the details, what extra filters i did , what extra restrictions i did.
I am now using the same query in WAD, in order to design a web template.
So please suggest how to create that Information tab in Web template.
I think i have to create a Button, than name it as Information,
But then selecting a Command, what Selection do i have to make
Which command selection i have to do and what settings I have to make.
Please suggest appropriate step by step approach as i am new and learning.
Also if you can tell how to use a specific Query in WAD to design a Web template.
Thanks
W

I am new ,so if you can shed light by giving steps i will appreciate it.
In SPRO, i can see SAP REFERENCE IMG, IMG INFORMATION, PROJECT ANALYSIS, MANAGE WORKLIST ....
How shall i go to reporting section.
All reports are linked to portal so they execute equally on Portal with same setting.
So how shall i copy that web template/
If i copy the web template , how shall i remove everything else.
How shall i use that web template in My WAD.
How to save that Web template.
Do i have to do everything in Bi server, as i can use SPRO tcode only there.
If i create new template in WAD, how can i drag and drop the function as of default template.
How shall i set the property
Please suggest

Passing parameters from an URL to a WAD Web Template 7.0

Hi guys, I need to pass parameters from an URL to a web template created with WAD 7.0. We need to open a template with certain filters starting from a link button located on an Xcelsius Dashboard. Our customer wants a web template to be opened with the filters defined within the Xcelsius
The idea is to run the template with the filters defined in the URL. I know this was incredibly easy with WAD 3.x, but I didn't find any suitable solutions to use with WAD 7.0.
What is the easiest way to do this with WAD 7.0?
Thanks in advance and regards.
Fabio Cristi

Hi,
It is possible in 7.0, but unfortunately it is a lot more complicated than i 3.x. There are quite a few examples here:
http://help.sap.com/saphelp_nw70/helpdata/en/43/ef05462480025ae10000000a1553f7/content.htm
I used it in a case where I wanted to embed a Web template in a BPS application and pass characteristic filters from the BPS application to the web template - similar to your requirements. Basically you need the following just to restrict one characteristic :o(
&BI_COMMAND_1-BI_COMMAND_TYPE=SET_SELECTION_STATE
&BI_COMMAND_1-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF_1=DP_1
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1=SELECTION_INPUT_STRING
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1-SELECTION_INPUT_STRING=PDS06
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-CHARACTERISTIC=0D_PH2
I could only get it to work with one characteristic and I suspect, that the reason is that the URL simply gets to long (very quickly). You have to repeat the above for every characterstic you want to use :o(
Hth,
Jacob

Problem Publishing WAD Web template in a Browser

Hello everyone,
I have developed a Web template using BEx WAD. When i try to execute the same in my browser. It say page cannot be displayed in internet explorer. I checked with the Basis consultant to see if the port settings were correct. He said everything was OK. Can anyone suggest ay troubleshooting steps i can follow to resolve this issue? Could also use some WAD configuration documents if any available to pass onto the Basis team as they are not well versed with BEx WAD.
Thankyou,
RadhaKrishna.

You can check the BW WAS configuration using the FM RSBB_URL_PREFIX_GET. Also make sure all the BW Bex Services are active in tcode SICF.
The attached document gives youy detail steps for the same.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ec20a990-0201-0010-f291-d1d039975e41
Thanks.

Problem With the Web Template in the QA when moved from DEV

Hi SAP gurus,
I am Working in BI 7.0 SP16 . Actually I had Designed and Published a web template which generates graphs in the Portal.
In WAD
In the chart options, for X-axis, for the text direction i have changed to Diagonal UP and font for the text is "Arial" and style is "bold".
when I execute the Web template in Development System all the queries , graph and font is working fyn.....but when I transported to the QA system
the problem is:
When I executed the Web template in QA , the graph is generating fyn and the queries r running fyn but the font changed to "Times New Roman " , the direction of the text is "Horizontal" and the style is "Normal"
and when i checked the chart options in QA i can see all the options are right i.e what i had given in the development system the text direction " Diagonal UP" and font for the text is "Arial" and style is "bold".
this was the frst graph that i was generated in the WAD in DEV moved to QA.......so wat could be the problem.....Is there any problem vith the configuration issue in the portal side in QA or any connection problem in the portal?
can any one help me to solve this issue?
Thanks ,
Aravind

Hi sriman,
when u want to edit the chart-> rgt click on the chart and select the edit option
-> it vill take to the other window
-> at the bottom of the chart there is a button refine.click that button.it vill take to the others options for the chart.
->click the category axis(X-axis) or to the right of the chart, u can c the chart options,go to the category axis ,expand the categoryaxis option.
-> under the category option, there vill be four options Line, Grid line,Title and Unit.
-> Select the Line option,at the bottom of that window, u can c the option for the Line.
-> go to the text properties, u can change the text wat u want.
regards,
Aravind.

BEx Web - Inserting Tabs with multiple Web Templates

I encounter much difficulty to find consistent information on how to create a Web cockpit (BW3.5) by making use of embedded Web Templates (using web template web item).
In particular,
- How to define tab pages?
- How to insert an HTML document in one of these tab pages or in the body of a single Web template?
I would be glad if you could give me links to helpful documentation or share your own experience.
Best regards.
Laurent Querella
BI Consultant
ALTI Belgium

Hi,
I can`t find the BW Expert coding, too.
But try out following coding.
This example template contains 4 tabs
1) Query (assign a Query to DP1)
2) Query View (assign a view to DP2)
3) Template (assign a template ID)
4) Template (0ANALYZER)
rgds Jens
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_PROPERTIES"/>
         <param name="TEMPLATE_ID" value=""/>
         TEMPLATE PROPERTIES
</object>
<HTML>

<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_DATA_PROVIDER"/>
         <param name="NAME" value="DATAPROVIDER_2"/>
         <param name="DATA_PROVIDER_ID" value=""/>
         DATA_PROVIDER:             DATAPROVIDER_2
</object>
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_DATA_PROVIDER"/>
         <param name="NAME" value="DATAPROVIDER_1"/>
         <param name="DATA_PROVIDER_ID" value=""/>
         DATA_PROVIDER:             DATAPROVIDER_1
</object>
<HEAD>
<TITLE>BW Web Application</TITLE>
      <link href="/sap/bw/Mime/BEx/StyleSheets/BWReports.css" type="text/css" rel="stylesheet"/>
      <script type="text/javascript">
      
      </script>
</HEAD>
<BODY>
<table cellspacing="0" cellpadding="5" border="0" id="tabheader">
            <tr>
<td class="SAPBEXTbsTab" id="head_TAB1"><A href="javascript:goto_tab('TAB1')">Query</A>
</td>
<td class="SAPBEXTbsTab" id="head_TAB2"><A href="javascript:goto_tab('TAB2')">Query View</A>
</td>
<td class="SAPBEXTbsTab" id="head_TAB3"><A href="javascript:goto_tab('TAB3')">Template</A>
</td>
<td class="SAPBEXTbsTab" id="head_TAB4"><A href="javascript:goto_tab('TAB4')">BEx Web Analyzer</A>
</td>
</tr>
    </table>
<table width="100%" class="SAPBEXTbsBdyEdg" cellspacing="0" cellpadding="5" border="0">
                        <tr>
                <td valign="top" >
      <P>
<span id="TAB1">
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TAB1"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="GENERATE_CAPTION" value=""/>
         <param name="BORDER_STYLE" value="NO_BORDER"/>
         ITEM:            TAB1
</object>
</span>
<span id="TAB2" ><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TAB2"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
         <param name="HIDDEN" value="X"/>
         <param name="GENERATE_CAPTION" value=""/>
         <param name="BORDER_STYLE" value="NO_BORDER"/>
         ITEM:            TAB2
</object>
</span></P>
      <P><SPAN id="TAB3"><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TAB3"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_TEMPLATE"/>
         <param name="HIDDEN" value="X"/>
         <param name="GENERATE_CAPTION" value=""/>
         <param name="TEMPLATE_ID" value="myTemplateID"/>
         <param name="USE_ONLY_BODY" value=""/>
         <param name="NAME_PREFIX" value="TAB3"/>
         ITEM:            TAB3
</object>
</SPAN></P>
      <P><SPAN id="TAB4"><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TAB4"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_TEMPLATE"/>
         <param name="HIDDEN" value="X"/>
         <param name="GENERATE_CAPTION" value=""/>
         <param name="USE_ONLY_BODY" value=""/>
         <param name="TEMPLATE_ID" value="0ANALYZER"/>
         <param name="NAME_PREFIX" value=""/>
         <param name="BORDER_STYLE" value="NO_BORDER"/>
         ITEM:            TAB4
</object></SPAN></P>
</td>
</tr>
</table>
<script type="text/javascript">

</script>
</BODY>
</HTML>

Problem with Viewing Web templates

Hi,
Iam facing problem with web template view which is designed.it is giving error even in preview mode and even on web.
I would like to know which particular service in Sicf is needed to activate so that i can work with webtemplates in preview mode and in web mode.
thanks for your all inputs in advance
Cheers,
vMatt

Hi Govind,
<application Name> i didn't get exactly what you mean iam seeing lot of services inside here,which service in particular i need to activate..
If iam trying to test any service as they are some in active state .iam getting an error message that ICMAN not active.
Anly idea in related to this...
Cheers,
vMatt

Display 2 reports in 2 tabs of one WAD web template --variable issue

We need to create one web template which contains 2 queries in 2 tabs in WAD. Each query has its own selection option. But after we create it in this way, the two queries selection option combined together in the initial screen.
This is not convenient because we would like to set different authorizations to these 2 query reports, some people only can access to one of these 2 reports. But in this case, they have to enter all the selection option for displaying only one report.
Is it possible to separate the selection screen for these 2 reports to 2 selection screens? Maybe it will be required to enter selection data when press individual tab.

HI,
Its possible that each tab can have different selection Screen.
In the Tab parameters :
First Tab: In command prompt,Specify "Call Variable Screen Dialog" .
Similarly do it for Second tab.
Now when open query..for each Tab,you will see a selection screen based on your data provider
hope this helps
Sriman

Running query in default WAD web template

Hello Experts,
Can you please guide me about how i can run a query in a default web template created in BEX Web Application Designer?

Welcome to SDN.
Kindly use BEX forum for BEX/WAD related queries.
(SAP Business Explorer (SAP BEx)).
coming to your question.
you can set the webtemplate created by you as the default webtemplate from transaction RSCUSTV21.
once its set, if you open query on the web (from query desinger,etc) it will utilize the default template you have set.
Regards
Raja

Error in executing WAD web template

Hi All,
I am executing the query/WAD template.
I can run the query/template but it does not give me data at the output.
I need to execute WAD template which are not giving data at the output.
Currently the template is getting executed but it is showing NO APPLICABLE DATA FOUND
along with it It gives error saying no active transfer structure exists in source system but this is 7.0 data source & I have transformations created for it.
I have tried creating a test query on my multi provider, which gets executed using RSRT but through portal it gives me error as,
system error in program CL_RSR_RRK0_ATTR_C and from CHECKALVL-01
Please provide some pointers to solve the issue.
Thanks & Regards,
Rashmi.

Hi Rashmi,
You try implementing the processes in these SAP Notes for your error while executing the query on multiprovider.
1023404
1003609
1132221
the links for these sap notes are:
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1023404
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1003609
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1132221
With Regards,
Ravi Kanth.

Help needed with Flash web template

I am working on a flash website for our Boy Scout Troop. It is based on a template purchased on-line.
I am using Adobe Flash CS4.
Here is a preview link to the template that I am working with... http://www.easytemplates.com/templates/flash/boy-scout/
If you click on the "foundation" button, you will see a movie under the Eagle Honor Roll, named "read more". When you click on that movie, it opens a window in the upper left corner of the screen. I am having two issues with this, as well as several other similar movies that look the same, and perform the same function (opening differant text boxs).
I was able to easily go into the actionscript for each of them and change the name of the title that shows up on the top of the pop up window, but I can't for the life of me find where to edit the text. Every other pop-up window has a seperate movie file which I can edit, but this one does not. I have looked through all of the Symbols multiple times, and there is not one listed. The "read more" movie that is in the left hand box on the information page has a symbol that contains the text. the ones on the "Foundation" and "Our Program" pages do not. How do I change the text, if there is no symbol containing that text?
I also would like to be able to change the position of the pop-up window when it opens, but cannot find where to do that.
My other issue is editing the "Gallery" button at the top of the page, to point to a PHP Nuke site, that I am going to use for content management. I have found several tutorials on-line mentioning the use of the "on release get URL" command, but everytime I try to use it, it just breaks the animation on the button, and still does not open the URL in question. I have attached a .TXT file containing the current action associated with the button's "Blue box" (not sure what this is really called). I just need to know how to incorporate the "on release get URL" command without messing up the animatioon associated with the button.

start with the button that causes the text to be displayed. find what it does (which may not be easy because most templates are coded by novice or intermediate level coders) and follow that trail to the text. (note: the text may be in a txt or xml file that's loaded.)
to have a button release open a file, use:
yourbtn.onRelease=function(){
getURL("http://www.adobe.com");

TR with WAD web templates

Similar Messages

Maybe you are looking for