Trac upgrade failed on console.py

I just upgrade trac from 0.12.3-1 -> 1.0-1
It ask me to do 'trac-admin <repo_path> upgrade.
When I done, it shows
The upgrade failed. Please fix the issue and try again.
AttributeError:
I checked the trac.log:
2012-09-21 13:03:57,574 Trac[console] ERROR: Exception in trac-admin command:
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/trac/admin/console.py", line 108, in onecmd
rv = cmd.Cmd.onecmd(self, line) or 0
File "/usr/lib/python2.7/cmd.py", line 220, in onecmd
return self.default(line)
File "/usr/lib/python2.7/site-packages/trac/admin/console.py", line 284, in default
return cmd_mgr.execute_command(*args)
File "/usr/lib/python2.7/site-packages/trac/admin/api.py", line 124, in execute_command
return f(*fargs)
File "/usr/lib/python2.7/site-packages/trac/env.py", line 970, in _do_upgrade
self.env.upgrade(backup=no_backup is None)
File "/usr/lib/python2.7/site-packages/trac/env.py", line 686, in upgrade
if participant.environment_needs_upgrade(db):
File "/home/python/mytrac/tagsplugin/tractags/model.py", line 23, in environment_needs_upgrade
if self._need_migration(db):
File "/home/python/mytrac/tagsplugin/tractags/model.py", line 45, in _need_migration
db.rollback()
File "/usr/lib/python2.7/site-packages/trac/db/util.py", line 107, in __getattr__
raise AttributeError
AttributeError:

Similar Messages

SCSM 2010 to 2012 Management server upgrade failed

I upgrading my scsm 2010 to 2012 both Management and DW server.
So i have set up the secondary lab environment and do this.
The DW server has been upgraded successfully to 2012.
When i try to upgrade SCSM Management server, at the finalizing stage, i get this error as _RegisterExtensionsDeferred
Log as below.
2014-08-26T14:48:28.7717429+05:30   Always:   Trace Session Started
02:48:28:
02:48:28:Application Started
02:48:28:This is 64-bit application.
02:48:28:Product ID is NOT installed
02:48:28:Found ProductID:{A193A8C7-CBE7-4F3B-887F-6B03EE43A208}, ProductName:Microsoft System Center Service Manager SP1, Version:7.0.6555.128
02:48:28:Found SMServer components
02:48:28:Found SMConsole components
02:48:28:Setup is running from: c:\SCSM2012\amd64\Setup
02:48:28:Using local Analysis server as default instance
02:48:28:Using 'DWASDataBase' as default Analysis server database name
02:48:28:Using 'Default' as default Analysis server database file path
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_license.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_EvalLicense.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\PrerequisiteInputFile.xml.
02:48:29:Found c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:48:29:All vital setup files found.
02:48:29:Upgrading Service Manager 7.0.6555 with 7.5.1561
02:48:29:Checking dependencies for Server upgrade...
02:48:40:Managment server is registered with Datawarehouse 'TESTSER'
02:48:42:Datawarehouse is up-to-date
02:48:42:Getting Management Group information from TESTSER:ServiceManagerNew
02:48:42:[GetManagementGroupPropertiesFromDB]: Opened the DB connection using Data Source=TESTSER;Initial Catalog=ServiceManagerNew;Integrated Security=True;Persist Security Info=False.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Management Group information.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Primary SDK server:..net.
02:48:42:Validating SmAdminRoleGroup
02:48:43:Checking MU OptIn state
02:48:43:MU is not opted in
02:48:43:Start adding DataItems
02:48:43:System Center Service Manager Install
02:48:44:Final Install Tasks
02:48:44:Done adding DataItems
02:48:46:Getting Domain List
02:49:35:LoadPrerequisites: Start adding ComponentTitles
02:49:35:LoadPrerequisites: Start adding DataItems
02:49:35:Memory check
02:49:36:Microsoft SQL Server 2008 Analysis Management Objects
02:49:36:Memory check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:IIS check
02:49:36:ASP.NET check
02:49:36:Basic Authentication check
02:49:36:Windows Authentication check
02:49:36:Microsoft .NET Framework 4 check
02:49:36:Windows Service Pack check
02:49:36:Microsoft Report Viewer Redistributable check
02:49:36:PowerShell 2.0 check
02:49:36:SharePoint Server 2010 check
02:49:36:SharePoint Farm Administrator check
02:49:36:SharePoint Server 2010 configuration check
02:49:36:ADO.NET Data Services Update check
02:49:36:Microsoft SQL Server 2008 Native Client check
02:49:36:Language Pack for SharePoint Server 2010 or SharePoint Foundation 2010 - English check
02:49:36:LoadPrerequisites: Done adding prerequisites checks
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Memory check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   MemoryCheck-8gbWarn: 0
02:49:36:
02:49:36:CheckPrerequisites:    Memory check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Analysis Management Objects prereq.
02:49:36:Entered RequiredAMO
02:49:36:Trying alternate method of detection using Assembly.Load
02:49:36:CheckPrerequisites:        Logic Type:and   AMO-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft SQL Server 2008 Analysis Management Objects: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Processor speed check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   ProcessorSpeedCheck2.5MHz-Warn: 0
02:49:36:CheckPrerequisites:        Logic Type:and   ProcessorCoreCheck2Core-Warn: 0
02:49:36:
02:49:36:CheckPrerequisites:    Processor speed check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Windows Service Pack check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   Win2k8R2Sp1Check-Err: 0
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites:        Logic Type:or   Win2k8R2Sp1DCCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                The value 6.1.7601.65536 was not within the range 6.2.0 to 9.9.9999.
02:49:36:CheckPrerequisites:        Logic Type:or   WinSrvrVNextCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites:        Logic Type:or   WinSrvrVNextDCCheck-Err: 2
02:49:36:
02:49:36:CheckPrerequisites:    Windows Service Pack check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft Report Viewer Redistributable check prereq.
02:49:36:Entered RequiredReportViewer
02:49:36:CheckPrerequisites:        Logic Type:and   RptVwrCheck-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft Report Viewer Redistributable check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking PowerShell 2.0 check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   PowerShell2Check-err: 0
02:49:36:CheckPrerequisites:        Logic Type:or   PowerShell2Check32-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    PowerShell 2.0 check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking ADO.NET Data Services Update check prereq.
02:49:36:Loading System.Data.Services.Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
02:49:36:Found version 3.5.30729.5420
02:49:36:CheckPrerequisites:        Logic Type:and   ADODotNetDataServicesHotfix-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    ADO.NET Data Services Update check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Native Client check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   SQLNCLI10-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft SQL Server 2008 Native Client check: Passed
02:49:36:
02:49:36:**************************************************
02:49:37:CheckPrerequisites: Return Value 0
02:49:39:Doing Pre-Upgrade checks...
02:49:39:Validating database ServiceManagerNew on SQL Server TESTSER
02:49:39:Validating SQL Instance TESTSER
02:49:39:SQL Server: TESTSER
02:49:39:SQL Server version: 10.50.1600.1
02:49:39:Full text search installed: True
02:49:39:Checking if '\administrator' is Sysadmin Or (SecurityAdmin And DbCreator) on SQL Instance TESTSER
02:49:39:Stopping Service OMSDK on server
02:49:39:Starting Service OMSDK on server
02:49:41:Stopping Service OMCFG on server
02:49:44:Starting Service OMCFG on server
02:49:47:Validating Path C:\Program Files\Microsoft System Center\Service Manager 2010\
02:49:47:Checking for available free disck space
02:49:47:Checking directory write access
02:49:47:*** Pre-Upgrade checks passed ***
02:49:47:QuickFixEngineeringHandler: Unable to LoadQuickFixEngineeringFile.
02:49:47:SetProgressScreen: StartMinorStep.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:ProcessInstalls: Install Item System Center Service Manager Install has a Preprocessing delegate of SystemCenterServiceManagerPreinstallProcessor. Launching it now.
02:49:47:SetProgressScreen: Init MSI Install progress.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:LaunchMsi: Msi mutex is not in use.
02:49:47:LaunchMsi: MSI to launch is: c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMsi: Turning off the internal UI for c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMSI: Enable logging for the MSI at C:\Users\administrator.\AppData\Local\Temp\2\\SCSMInstall02.log.
02:49:47:LaunchMsi: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi is not in silent mode. Setting the external UI.
02:49:47:LaunchMsi: Launching c:\SCSM2012\amd64\Setup\Server\SM.msi
02:49:52:statusUpdate: Resetting progress bar for MSI: MaxValue 58857
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:09:Install Progress - (ProcessComponents) Updating component registration
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:10:Install Progress - (StopServices) Stopping services
02:50:16:Install Progress - (_StopNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Stopping Health services
02:50:17:Install Progress - (RemoveODBC) Removing ODBC components
02:50:17:Install Progress - (RemoveFiles) Removing files
02:50:17:Install Progress - (CreateFolders) Creating folders
02:50:17:Install Progress - (InstallFiles) Copying new files
02:50:30:Install Progress - (_CreateDatabase) Creating Database
02:50:30:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:07:Install Progress - (ExecuteSqlStrings) Executing SQL Strings
02:52:07:Install Progress - (CreateShortcuts) Creating shortcuts
02:52:07:Install Progress - (WriteRegistryValues) Writing system registry values
02:52:08:Install Progress - (_InstallServerPerfCounters.D2179E31_E456_401A_A820_CEBB135E3429) Installing Server Performance Counters
02:52:12:Install Progress - (WriteEnvironmentStrings) Updating environment strings
02:52:12:Install Progress - (_Rollback_UninstallBIDMOF.68918168_3885_4F75_BBF8_0CC84213F8D1) Rolling back BID MOF Installation
02:52:23:Install Progress - (GenerateScript) Generating script operations for action:
02:52:24:Install Progress - (_MPProcessorDeferred) Importing Management Packs
02:52:25:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:26:Install Progress - (RegisterUser) Registering user
02:52:26:Install Progress - (RegisterProduct) Registering product
02:52:26:Install Progress - (PublishComponents) Publishing Qualified Components
02:52:26:Install Progress - (MsiPublishAssemblies) Publishing assembly information
02:52:26:Install Progress - (_ConfigureConfigService.D2179E31_E456_401A_A820_CEBB135E3429) Configure Config Service
02:52:26:Install Progress - (_CreateInstanceQualityRelationship) Creating Default Instances, Qualities And There Relationships
02:52:26:Install Progress - (PublishFeatures) Publishing product features
02:52:26:Install Progress - (_StartNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Restarting Health Service
02:52:26:Install Progress - (PublishProduct) Publishing product information
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:32:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:An error occurred while executing a custom action:_RegisterExtensionsDeferred
Upgrade failed after making permanent changes to this management server. A disaster recovery procedure will be necessary to rebuild this machine before attempting upgrade again. Consult the User Guide to determine which action to take next.
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 3
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 10525
02:58:43:MsiInstallProduct finished for msi c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:58:43:LaunchMSI: Setting rollback to true
02:58:43:LaunchMSI: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi returned error 1603:Fatal error during installation
02:58:43:ProcessInstalls: Install Item System Center Service Manager Install failed to install. We did not launch the post process delegate.
02:58:43:SetProgressScreen: FinishMinorStep.
regards Sundaresan.C

Jeremiah,
We ran into this as well. One of two options:
1.) Just run a repair on the SQL Server installation
2.) Repair the WMI settings on the SQL Server as descibed here:
http://social.technet.microsoft.com/Forums/en-US/systemcenterservicemanager/thread/2a91d03e-a685-495e-89ac-a591ec5871f6/
bb

Repository upgrade fails 11.1.0.7 db -10.2.0.5 GC patchset

Installing GridControl 10.2.0.5 on Windows 2003 Server SP2. Initial install successful of 10.2.0.2 using existing database 11.1.0.7. The database was created new to use for GC. Patchset no problems until Configuration Assitant step "Repository Upgrade" failed with errors:
rem Copyright (c) 1999, 2009, Oracle. All rights reserved.
oracle.sysman.emcp.oms.RepositoryPatchUpgrade -verbose
oracle.sysman.emcp.oms.OmsPatchUpgrade -configureOms
oracle.sysman.emcp.aggregates.ConfigPlugIn
oracle.sysman.emcp.oms.StartOMS -configureOms
oracle.sysman.emcp.oms.EMCLISetup
oracle.sysman.ccr.configCCR.ConfigCCRPlugIn
oracle.sysman.ccr.configCCR.ConfigRepeaterPlugIn
Tried to find cause of errors and cannot seem to understand why this step failed.
Considering uninstalling GC and Oracle 11g and reinstalling GC with "new database" option.
Anyone successful at installing GC 10.2.0.5 with an 11g database?
Thank you,
Curt Swartzlander
DBA

pasinc wrote:
Can anyone help me figure out why the domU is just hanging/blocked?It's not hanging (blocked just means it doesn't need the CPU) -- it's just switched into a graphic mode that the console view can't display. You can either VNC into the guest, or change the kernel boot parameters by removing rhgb quiet and replacing them with console=xvc0 -- this should allow you to see the full boot process and answer the first-boot interview questions without using VNC.
You can get the VNC details by running: virsh dumpxml <domain ID> and you can get the domain ID from the xm list output.

PI 2.0 to 2.1 Upgrade Fail

Upgrade failed. Output states:
ERROR: The last upgrade operation was unsuccessful. See dbadmin_StdOut.log for details. To recover, reinstall the server and restore the saved backup data.
% Pre-install step failed. Please check the logs for more details.
I cannot find this log anywhere. I cannot reinstall as it gives me the same error. No documents reference this file or log directory on the PI VM. Any help? Anyone seen this before?

Hi ,
was HA configured before on PI 2.0 ?
If yes remove the HA config from Both primary and secondary (ncs ha remove ) then try the upgrade.
I also suspect that something wrong can happen during file transfer from ftp server .
place the upgrade file locally on the NCS server and then try the upgrade .
You can place the file under /localdisk/defaultRepo/ .
You need to login as root first then you will be able place the file into this directory below .
PI20-1/admin#
PI20-1/admin# root
Enter root password :
Starting root bash shell ...
ade #
ade #
ade # cd /
ade # cd /localdisk/defaultRepo/
ade #
After that , you can transfer the file from your ftp server to your NCS server.
Now, you can perform the upgrade locally using console
application upgrade PI-Upgrade-2.x.x.x.x.x.x.gz defaultRepo
and lastly , the file it is pointing to ,it bydeafault location is :/opt/CSCOlumos/logs/
Thanks-
Afroz
***Ratings Encourages Contributors ****

Mail upgrade fails on import

Hi
When upgrading to Yosemite, the Mail app has gone into an endless loop of importing.
It tries to import, then reports that it has failed.
You then get a message about the Mail Index has been damaged and so you have to quit Mail.
It then starts the process all over again.
I have around 31K messages. But Mail is COMPLETELY unusable. Cant open/view/read/send/search/play with emails.
Very disappointing...
Here are some interesting entries from the system log:
20/10/2014 10:49:34.239 Mail[3459]: resolvedBaseMailDirectory /Users/amorton/Library/Mail
20/10/2014 10:49:48.805 Mail[3459]: Capturing diagnostics to trace took 14.565747
20/10/2014 10:51:07.133 Mail[3459]: open on /Users/amorton/Library/Mail/V2-Temp.noindex/[email protected]/Personal.mbox/Info.plist: No such file or directory
20/10/2014 10:51:22.518 Mail[3459]: Exception during migration: data parameter is nil
20/10/2014 10:51:22.518 Mail[3459]: Migration (simple) failed and took 108.279527 seconds
20/10/2014 10:51:27.228 Mail[3459]: emlxCountPreMigration 61078
20/10/2014 10:51:27.228 Mail[3459]: emlxCountPostMigration 61078
20/10/2014 10:51:27.229 Mail[3459]: lostAndFoundEmlxCount 0
20/10/2014 10:51:27.229 Mail[3459]: messageCountPreMigration 31712
20/10/2014 10:51:27.229 Mail[3459]: messageCountPostMigration 31712
20/10/2014 10:51:27.230 Mail[3459]: MessageTracing took 4.710642
20/10/2014 10:51:27.230 Mail[3459]: Upgrade failed because of exception: data parameter is nil
20/10/2014 10:51:27.231 Mail[3459]: Library upgrader failed: Error Domain=MCMailErrorDomain Code=1029 "data parameter is nil" UserInfo=0x7fac01622a90 {NSLocalizedDescription=data parameter is nil}
The thing is - that file does exist (the Info.plist reported at 10:51)
Any ideas, or are we destined to wait for the upgrade patch!?
Andrew

For what it's worth, I solved my problem. I went into the preferences for iCloud and unchecked mail and then rechecked it. Mail then started up just fine. However, my old messages for a couple pop accounts were not there (icloud and google mail were fine). So then I tried to import, but in the dialogue box, it didn't show the mail folder or even the library folder (which is normally hidden). So in finder, using the option + go menu I navigated to the libary folder and made an alias for the missing pop account's mail and put that on the desktop. Then I went back to mail and selected the alias for the missing pop account mail. It had no problem importing then, although it did take a while. Then when I selected import again, for some reason it went right to the correct mail folder within the library folder and I didn't have to make an alias for the other account. The mail all came in then under the imported category. For me that's actually ok. I had one piece of mail I really needed to find, and the search found it right away. So at least for now, all is well.

ISE 1.3 Upgrade fails

Hi All
I did upgrades from 1.2.1.198 to 1.3. With one box (SNS-3495-K9) out of four I have a problem.
I've tried it many times, I even made it to a standalone and did an application reset-config ise to initialize the box prior updating, but it always fails at step 40.
- Data upgrade step 40/67, CertMgmtUpgradeService(1.3.0.616)... % Error: ISE Global data upgrade failed!
Rolling back the configuration database...
Starting application after rollback...
% Error: The node has been reverted back to its pre-upgrade state.
% Application install or upgrade cancelled.
Any Idea ?
Thanks Thomas

Upgrade Failures
During upgrade, the configuration database schema and data upgrade failures are rolled back automatically. Your appliance would return to the last known good state. If this is encountered, the following message appears on the console and in the logs:
% Warning: The node has been reverted back to its pre-upgrade state.
error: %post(CSCOcpm-os-1.2.0-899.i386) scriptlet failed, exit status 1
% Application upgrade failed. Please check logs for more details or contact Cisco Technical Assistance Center for support.
In case of upgrade failures, before you try to upgrade again:
Analyze the logs. Check the application bundle for errors.
Identify and resolve the problem by submitting the application bundle that you generated to the Cisco Technical Assistance Center (TAC).

Mail upgrade failed: osx lion

I have a Macbook pro 17 intel dual core.
I upgraded from Snow Leopard to Lion and I have encountered the following problem.
Mail begins the importing of messages and once the import is complete it moves to the migrating data step
"MAIL UPGRADE FAILED"
An error occured during the upgrade. Click continue to launch the Mail Import Assistant, which will help you create a new library and import your existing messages"
When I click "Continue", the following message appears
Your Mail index has been damaged. To repair it, quit Mail.
Mail will repair the index the next time you open Mail. Your mailboxes and messages will be preserved.
But of course, Mail doesn't repair itself the next time it is opened....this just continues to happen.
Any help? I have read threads that suggesting deleting Mail preferences can help. Interestingly, I can't find mail preferences in the library folder

I fixed my issue, though it took hours of trial and error.
First, check Console (Applications/Utilities/Console) and click on All Messages in the left sidebar.   I had a message about permission denied to copy a file during the upgrade. I manually moved that file to the desktop. After that the message migration finished, and Mail launched. Hurray I thought! But on reboot, Mail would not launch. It just hung. This time there weren't any helpful messages in Console to be found.
I read over these threads for the tips:
https://discussions.apple.com/thread/3189986?start=0&tstart=0
https://discussions.apple.com/message/15666804#15666804
As best I can remember (it's been a long night), this was my process:
(Force) Quit Mail
Navigate to userI/Library/Mail folder
Move the entire Mail folder elsewhere, like your desktop
Launch Mail. At this point it should be be prompting you for info.
If you don't have anything on your machine only, just put in your info and download everything from your server from scratch. You're done!   If however you have my problem with 164,000 messages stored locally, read on…
Quit Mail
Back in user/Library there's a new Mail folder.
One by one, move the items from the old Mail folder to the new one and launch Mail. Make sure to move the user/library/mail/v2/maildata/accounts.plist first so it stops prompting you for account info. Make sure to quit Mail between every file move. If you don't see a v2 folder, or a v2-temp folder, it means the migration hasn't happened yet. Just keep moving things over until it does, cause the migration changes the directory structure of the Mail folder.
At the point you move your old archived messages over, the next Launch Apple will import and migrate all the messages. This can take anywhere from 2 minutes to 45 depending on how many messages it needs to cull through.
I ended up moving everything but the RSS folder items back, and Mail is once again stable.
At some point I also booted into Lion Recovery partition (hold Command + R at boot) and ran Disk Utility to repair permissions. However I don't believe that actually helped.
Good Luck!

DbSl Trace: CONNECT failed with sql error '12154'

Hi
I am trying to install DB instance , platform -> IBM AIX 5.3 , Database - Oracle 9i, sap version -> 4.7. I am getting error at Database load phase. The listener is started successfully, TNS ping is ok. Host file edited with proper ip address and the hostname, Still the error is same.
DbSl Trace: CONNECT failed with sql error '12154'
I am able to connect to oracle idle instance .
Please help me in solving this issue
Regards
Prasanna.B.S

Hi,
Good evening and greetings,
Please go through the following OSS Note
Note 324714 - DB connect error in TMS after Oracle upgrade/change
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Database upgrades fails

Platform: SQL Server 2008
Running P6 R7 SP5
When trying to upgrade the database to R8, database upgrades fails without any error message.
I just ran the dbsetup.bat and filled the "connection information" then press next and I got the "finish" screen directly without the "Ready to begin upgrading data" or "Primavera database setup wizard" and when check I found that no upgrade has been done.
please assest.

Thanks Alex for reply,
I've tried the above steps and I got the same action.
I can't see any strange in the console logging.
console logging_____________________________________________________________
DEV [INFO] : Look and feel is com.sun.java.swing.plaf.windows.WindowsLookAndFeel
DEV [INFO] : Setting job property unicode ->
DEV [INFO] : TRANSITION: operation_pm -> connect_upgrade_ss
DEV [INFO] : Calling operator SetProductSuiteTransOp
DEV [INFO] : Setting job property PRODUCT.SUITE.KEY -> PM
DEV [INFO] : Calling operator SetProductSuiteTransOp
DEV [INFO] : Setting job property PRODUCT.SUITE.KEY -> PM
DEV [INFO] : Calling operator SetActionTypeTransOp
DEV [INFO] : Setting job property ACTION.TYPE.KEY -> UPGRADE
DEV [INFO] : Calling operator SetServerTypeTransOp
DEV [INFO] : Setting job property SERVER.TYPE.KEY -> SQLSERVER
DEV [INFO] : Setting job property PRIVILEGED.USER.NAME.KEY -> PRIVUSER
DEV [INFO] : Setting job property PUBLIC.USER.NAME.KEY -> PUBUSER
DEV [INFO] : Calling operator SetLicenseTypeTransOp
DEV [INFO] : Setting job property LICNESE.KEY.TYPE -> MK
DEV [INFO] : Setting job property lictype -> _mk
DEV [INFO] : Calling initializer SetHostnameToCurrentMachine
DEV [INFO] : Calling page post processor SetSqlServerConnectStringTransOp
DEV [INFO] : Connection for class ADMINISTRATIVE in page (connect_upgrade_ss) fr
om page (connect_upgrade_ss) = sa/sa@sqlserver:servername:1433:PMDB
DEV [INFO] : Calling page post processor SetSSUpgradeSchemaType
DEV [INFO] : Setting job property PRODUCT.UPGRADE.KEY -> PM
DEV [INFO] : Calling page post processor SetSSUpgradeVersionFileString
DEV [INFO] : Setting job property PM.PRODUCT.KEY -> PM
DEV [INFO] : Setting job property EXP.SCHEMA.NAME.STRING.KEY -> PM
DEV [INFO] : Setting job property SCHEMA.INFO.LIST.KEY -> [PM_08_00_00]
DEV [INFO] : Setting job property PRODUCT.INSTALLED.VERSION.KEY -> 0700.0001.000
1.0003
DEV [INFO] : Calling page post processor SetSSUpgradeExpUseUnicode
DEV [INFO] : Calling page post processor SetPMUpgradeSchemaInfoListTransOp
DEV [INFO] : Setting job property PM.PRODUCT.KEY -> PM
DEV [INFO] : Setting job property SCHEMA.INFO.LIST.KEY -> [PM_08_00_00, null]
DEV [INFO] : Calling page post processor SetUpgradeNeedsWebUserOptionsPage
DEV [INFO] : TRANSITION: connect_upgrade_ss -> finish
DEV [INFO] : Calling initializer AddTextToDataInitialize
DEV [INFO] : Setting job property unicode ->

Help needed: iPhone 4 software upgrade failed many times

Hello. I've bought an iPhone 4, which its operating system is 4.3, and was prompt by iTunes about this iPhone 4 software upgrade to iOS 4.3.5. I've downloaded the software and waiting for quite some time and after the dowloading has completed, the file will be processed. After processing, there is a popup saying that somehow the software upgrade failed and said something like make sure that your connection is correct etc. Do you have any idea on how to solve this issue?
Help me, please. Thank you very much.

This is asked and answered many times each day. The forum search bar is on the right side of this page.
Diasble your firewall/security software and try again.

Upgrade fails in the phase STARTSAP_TBUPG during the upgrade of CRM 4 to 5

Hello,
Upgrade failed with the below message in the upgrade phase STARTSAP_TBUPG during the upgrade of CRM 4.0 to CRM 5.0
Error Message:
SYSTEM START failed, code -1
             -1: 'startsap.exe' returned an error
             See file 'D:\usr\sap\put\log\R3up.ECO' for details.
R3up.ECO:
SAPup> Starting subprocess startsap.exe with id 5844 at 20080402142258
EXECUTING D:\usr\sap\put\exe\startsap.exe name=SID nr=00 SAPDIAHOST=Hostname
Environment: dbms_type=mss
Environment: dbs_mss_schema=cdu
STARTSAP failed
Details are written to D:\usr\sap\put\tmp\startSID.log
Process with ID 6276 terminated with status -1
startSID.log
running D:\usr\sap\put\exe\sapstart.exe name=SID nr=00 SAPDIAHOST=Hostname -wait
SAPSTART finished successfully on Host_SID_00, but at least one process doesn't run correctly:
     msg_server.exe, MessageServer, Running, 2008 04 02 14:22:58, 0:03:19
     disp+work.exe, Dispatcher, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, 2008 04 02 14:22:58, 0:03:19
     igswd.exe, IGS Watchdog, Stopped, 2008 04 02 14:22:58, 0:00:00
D:\usr\sap\put\exe\sapstart.exe=>sapparam(1c): No Profile used.
It is trying to start the shadow instance and failing by ending all the work process
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        SID
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    150
intno      20050900
make:      multithreaded, ASCII, optimized
pid        5348
Wed Apr 02 17:22:10 2008
kernel runs with dp version 234(ext=109) (@(#) DPLIB-INT-VERSION-234)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5348) [dpxxdisp.c   1245]
     shared lib "dw_xml.dll" version 150 successfully loaded
     shared lib "dw_xtc.dll" version 150 successfully loaded
     shared lib "dw_stl.dll" version 150 successfully loaded
     shared lib "dw_gui.dll" version 150 successfully loaded
     shared lib "dw_mdm.dll" version 150 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Wed Apr 02 17:22:22 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0100.qqq.nxst) took 12 seconds
Wed Apr 02 17:22:40 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5373]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >HOSTNAME_SID_01                      <
DpShMCreate: sizeof(wp_adm)          22968     (1044)
DpShMCreate: sizeof(tm_adm)          3642120     (18120)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1296)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05560040, size: 4281040)
DpShMCreate: allocated sys_adm at 05560040
DpShMCreate: allocated wp_adm at 05561B30
DpShMCreate: allocated tm_adm_list at 055674E8
DpShMCreate: allocated tm_adm at 05567518
DpShMCreate: allocated wp_ca_adm at 058E0820
DpShMCreate: allocated appc_ca_adm at 058E4E70
DpShMCreate: allocated comm_adm at 058E65E0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05967490
DpShMCreate: allocated gw_adm at 059674D0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05967500
DpShMCreate: allocated wall_adm at 05967508
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2039 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12553]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( HOSTNAME) [dpxxdisp.c   11867]
DpStartStopMsg: send start message (myname is >HOSTNAME_SID_01                      <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 150
Release check o.K.
Wed Apr 02 17:23:20 2008
my types changed after wp death/restart 0x1f --> 0x1e
my types changed after wp death/restart 0x1e --> 0x1c
my types changed after wp death/restart 0x1c --> 0x18
my types changed after wp death/restart 0x18 --> 0x10
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:30 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Wed Apr 02 11:53:30 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     6916 Ended         no      1   0        0
1 DIA     7724 Ended         no      1   0        0
2 DIA     6044 Ended         no      1   0        0
3 DIA     4300 Ended         no      1   0        0
4 DIA     6992 Ended         no      1   0        0
5 DIA     2412 Ended         no      1   0        0
6 DIA      432 Ended         no      1   0        0
7 DIA     8168 Ended         no      1   0        0
8 DIA     5420 Ended         no      1   0        0
9 DIA     9712 Ended         no      1   0        0
10 UPD     4320 Ended         no      1   0        0
11 ENQ     3476 Ended         no      1   0        0
12 BTC     2676 Ended         no      1   0        0
13 BTC     6816 Ended         no      1   0        0
14 BTC     9636 Ended         no      1   0        0
15 BTC     8356 Ended         no      1   0        0
16 BTC     7004 Ended         no      1   0        0
17 BTC     7284 Ended         no      1   0        0
18 BTC    10048 Ended         no      1   0        0
19 BTC     4560 Ended         no      1   0        0
20 BTC     4196 Ended         no      1   0        0
21 SPO     4268 Ended         no      1   0        0
Dispatcher Queue Statistics               Wed Apr 02 11:53:30 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          7
wake_evt_udp_now     0
wake events           total     3, udp     3 (100%), shm     0 ( 0%)
since last update     total     3, udp     3 (100%), shm     0 ( 0%)
Dump of tm_adm structure:               Wed Apr 02 11:53:30 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Wed Apr 02 11:53:30 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:35 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >HOSTNAME_SID_01                      < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1860 HANDLE:1448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1860 HANDLE:1448)
DpStartStopMsg: send stop message (myname is >HOSTNAME_SID_01                      <)
NiIMyHostName: hostname = 'HOSTNAME'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Apr 02 17:23:37 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12213]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1356 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1356 (pos=2)
SiSelNRemove: removed sock 1356
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1356
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5348) [dpxxdisp.c   10461]
Good Bye .....
Please help me in resolving this issue
Thanks,
Vadi

Hi Suhas,
Have checked the hostname and it is correct.
I am getting the below output When i run r3trans -x
This is r3trans version 6.14 (release 700 - 04.03.08 - 16:43:00).
r3trans finished (0000).
I could see the below error message in dev_W21
ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'sid_shd' setuser 'sid_shd']
C sloledb.cpp [ExecuteAndFlush,line 6470]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'cdu_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'cdu_shd' failed -- connect terminated
C failed to establish conn. 0
Thanks,
Vadi

CUCM 8.6.2 to 9.1.2 Upgrade fails

I am trying to complete an upgrade of CUCM 8.6.2 to 9.1.2 however the upgrade fails at the very end - I have attempted this 4 times in various different ways from using SFTP to local media I get the following error;
HWModel=7835I3
CPUCount=1
CPUType= Intel(R) Xeon(R) CPU E5504 @ 2.00GHz
CPUSpeed=2000
MEMSize=4096
BIOSVer=IBMCorp. -[D6E150CUS-1.11]- 02/08/2011
ObjectId=1.3.6.1.4.1.9.1.585
OSVersion=UCOS 5.0.0.0-2
SerialNumber= ********
VendorOID=1.3.6.1.4.1.2]|<LVL::Info>
05/17/2014 13:54:49 upgrade_install.sh|Cleaning up download...|<LVL::Info>
05/17/2014 13:54:49 upgrade_install.sh|Cleanup upgrade source area.|<LVL::Info>
05/17/2014 13:54:49 upgrade_install.sh|Ejecting DVD (/dev/sda1)|<LVL::Debug>
05/17/2014 13:54:51 upgrade_install.sh|Removing /common/download/9.1.2.10000-28>
05/17/2014 13:54:51 upgrade_install.sh|Started auditd...|<LVL::Info>
05/17/2014 13:54:52 upgrade_install.sh|Started setroubleshoot...|<LVL::Info>
05/17/2014 13:54:52 upgrade_install.sh|Changed selinux mode to enforcing|<LVL::>
05/17/2014 13:54:52 upgrade_install.sh|Cleaning up rpm_archive...|<LVL::Info>
05/17/2014 13:54:52 upgrade_install.sh|Removing /common/rpm-archive/9.1.2.10000>
05/17/2014 13:55:02 upgrade_install.sh|File:/usr/local/bin/base_scripts/upgrade>
05/17/2014 13:55:02 upgrade_install.sh|set_upgrade_result: set to 1|<LVL::Debug>
05/17/2014 13:55:02 upgrade_install.sh|is_upgrade_lock_available: Upgrade lock >
05/17/2014 13:55:02 upgrade_install.sh|is_upgrade_in_progress: Already locked b>
05/17/2014 13:55:02 upgrade_install.sh|release_upgrade_lock: Releasing lock (pi>
Installation of UCSInstall_UCOS_9.1.2.10000-28.sgn.iso failed
An unknown error occurred while accessing the upgrade file.
A system reboot is required when the upgrade process completes or is canceled. .
I have previously used this ISO for other clients without an issue and have checked the MD5 is correct
Has anyone else experienced this issue?
Thanks,
Richard

We have got this resolved, after raising a case with TAC they identified that we were hitting the following bug;
CSCub53409
The detail on the bug is very limited but in our case it was caused by an issue with the numbering plan, GBNB 1.1(21) - we upgraded to the latest version 1.1(29) and the upgrade has now completed.

How can I make an ant file that launches an AS project app in a debug flash player that traces to the flex console?

How can I make an ant file that launches an AS project app in a debug flash player that traces to the flex console?
Basically I like the control over the compiling process that I get by using Ant - but I really want traces to come up immediately without having to switch contexts.
I have an ant file that successfully launches a swf in the flashplayer - but I don't know how to make the flex console start displaying the trace output. I assume that I will have to point it to the appropriate trace output file - but I am not sure how to have ant even address the console. Is this possible?
Here is the the target node from my ANT file:
    <target name="launch">
        <exec executable="${FLASHPLAYER_EXE}" errorproperty="trace.output">
            <arg line="'${DEPLOY_DIR}\test.swf'" />
        </exec>
    </target>
Thanks for any thoughts, or alternatives!

For the record, I ended up using Logwatcher - it worked perfectly.
http://graysky.sourceforge.net/

On Windows 7 PC, got the "upgrade iTunes" notice, said sure, but the upgrade failed, now I can't access iTunes "invalid permissions"

On Windows 7 PC, got the "upgrade iTunes" notice this morning, said sure, but the upgrade failed, now I can't access iTunes "invalid permissions"
I wasn't paying attention so I don't know the precise error I got on the upgrade failure.
All other iTunes upgrades have been fine...no brainers. Done several on this W7 PC.
If I re-download and install a fresh iTunes I assume I will lose my library...true? Can I find and save off my library so I don't have to "discover" all my music which is scattered all over the PC and a 1T attached USB drive.
Or is there some way to get the iTunes upgrade to successfully restart and install correctly?
Help!

Hello there, Konami84.
The following Knowledge Base article provides some recomendations for troubleshooting:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Firmware upgrade failed, printer now say i has firmware version 0. attention light lights up

Hey all
I had a problem printing a pdf on my mac, and then tried to upgrade my mac driver and printer firmware.
But the firmware upgrade failed for some unknown reason. And now the printer just have the ready and attentions lights on constantly.
I have tried to restart and reset the printer many times, and tried the HP firmware upgrade utility several times, with no luck. It just say it was "failed to upgrade"
Any idea what to do ??
My printer is a HP Laserjet Pro CP1025nw
Thanks
Jan

Hello Jan
It definitely sounds like the firmware update failed. Firmware is like a devices Operating System. Without it, it can't do much. This is backed by the "failed" message and that your printer reports it has version 0.
The printer will need to be serviced. Please call HP Phone Support at 1-800-474-6836.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Trac upgrade failed on console.py

Similar Messages

Maybe you are looking for