Trace("anything"); //Not working anymore

Hello,
I'm in development with my technical director. My code was working fine and dandy.
Then he implements a "paperdoll" interface like torchlight.
He grumbled something about his trace commands no longer working in the project, or working randomly.
Now that I am interfacing with his code, my trace("stuff"); commands are not working either.
What are some possible things he did which nullify trace commands?
,Jim
PS: I still get type lag, it is worse now, sometimes taking up to 10 seconds long, while Flash Builder says Flash Builder(Not Responding). I think it has to do with highlighting variables you're using, but I can't find a way to disable that.

Hi GoodNewsJim,
Good to know that breakpoints work, if you need trace()'s to start working again,
Simply try:
1. Toggling Window -> Enable Design view to disable design view.
2. Restarting Flash Builder
3. Doing a Project clean
That should bring back traces for good.
P.S: This is a known bug in the preview release - https://bugs.adobe.com/jira/browse/FB-27654
Cheers,
Anirudh

Similar Messages

Email notifications are not working anymore

Hi guys,
I use Grid Control 10.2.0.2 on Windows, and email notifications for critical alerts are not working anymore.
I didn't change anything to the OMS configuration, it just stopped one day, and when I ask for a test email (in "Setup -> Notifications methods" of in "Preferences") it is successfully delivered.
I didn't find anything related to this in log files, and nothing that could help here or on metalink.
Can anyone help about that weird issue ??
thanks in advance
Antoine

Have you gone back over your notification rules?
have you tried just creating a new notification rule and testing it?
Also take a look at Note:356774.1. If you've applied any patches (or done partition maintenance) you may have inadvertently lost all your jobs, which will break the email notications.
If still no joy, then try Note:285093.1.
let us know how you get on.

After updating my iPod touch 3rd generation to IOS5 some default apps are not working (anymore)

Hi,
I updated my iPod touch 3g from IOS 4.x to IOS 5 last week and since then my iPod makes troublle!
First of all, during the update I did not see any Problems. After the update, I mean the step where the data will be restored to the iPod, I synchronized some APPS at the same time, maybe that was a big mistake. My iPod makes hard resets many times in a loop until it frozes.
So the only thing I could do here is pressing the home button and the power switch at the same time until it gets rebooted. The sync started again and it looked like everything runs fine.
As I tried to use iMessage first time I realised the first Problem: I am unable to loginto iMessage with my Apple ID. My Apple ID runs fine, I can by Apps and so on. I also enabled iCloud to see that my Apple ID is ok. But logging into iMessage I put in my Apple credentials and Password, click on next, wait 3 seconds and the screen flips back. So this feature is not working.
Next issue I see is that randomly my iPod hard resets itself. Even if I don't do anything with my iPod I can see that it resets itself, booting with the apple icon. This happens minimum three times a day... (Exception Type: EXC_BAD_ACCESS (SIGSEGV), Kern_INVALID_ADDRESSat 0x00000000)
Today I tried YouTube, an internal Application which I cannot reinstall. It's not working anymore, starting YouTube says: Unable to connect to YouTube!
I have no clue whats going on here because email and web is working fine.
In my eyes I would like to reset the whole device to a state before running IOS5 and I would try the update again. But my Question is how to reinstall IOS5?
If IOS5 will not run smoothly on my iPod, I would prefer to backref to iOS4x.
Is there anyone who could help me out here?
Thanks,
Daniel

Found the rootcause. The battery was damaged and unable to have enough power to keep the device alive. After changing the device problem is solved.

After updating to V 15.0 I have the issue that suddenly many but not all of the functions do not work anymore. Menues and download links do not work.

I have updated my firefox to version 15.0. After this I have the effect that at some unspecified time during use many of the functions stop working. Menu's do not open, download links do not work anymore and so on. Opening new tab's or windows still works. Links on pages partly work partly not. Copy and paste does not work anymore on webpages. It takes ending the firefox process and restarting to correct the issue until it happens again. I have those effects on totally different webpages. At this time it happens every time after I start Firefox but not right away. Firefox first works for some time and then it suddenly doesn't anymore without me having done anything special

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

IPhone 5S mic and Touch-ID do not work anymore - What to do?

Hi together and a happy new year to everyone!!
At the moment I have got a serious problem talking about my new iPhone 5s. As it's a cell phone I would like to talk to my friends and family using it. But it seems that this part of the devices is not working anymore as the mic doesn't record anything. If I try to call someone, they can't hear me while I can clearly listen to what they are trying to tell me. So I was wondering whether this is a "phone-app"-problem only or if the mic does not work at all. So I just use to start the "memo"-app, and: It doens't work either. I have no clue what's wrong with the iPhone.
I also tried the update to 7.0.4 and even the reset with the same iOS build, but nothing changed.
So what should I do?
Now, the second problem is that I cannot use Touch-ID anymore. It used to work without any problems but now I does not recognize my finger(s) anymore and I am not able to scan a new finger anymore...that's really annoying. - Tried the same staff here: Update and reset, but nothing changed.
Anyone here who experienced the same problem(s)? Any help or good advice?
Thanks a lot an a happy New Year's day to everyone of you guys out there!!

I have a same problem, and my iphone is the 4S!!!
When I turn on the phone speaker, the mic isn't working, after upgrade to ios 6....
Please help us!

Mac os 10.4.10 software update problem -- my mac does not work anymore :(

hello!
i have a powerbook G4- PPC. just today, i did a software update of my OS to 10.4.10 (it was the available update version according to the automatic uptae) and during the final stage of the installation, it says "a problem was encountered...installation package is moved to trash"
when i browsed my mac, my apps does not work anymore!!! they just bounce from the dock when i clicked it but it won't open any window. i emptied the trash and restarted my mac but sadly, it just boot but won't continue to the log in part, only in the silver window with the apple logo and mac os x tiger... and the mouse just turns into the color wheel. i waited for 30 mins and nothing happened.
i don't have a startup disc because the mac is a gift and it was long time ago. is ther a software i can use to fix or revert the changes of the unsuccessful OS update? why is there always a problem when i do OS update? isn't apple software stable?
My mac problems' driving me crazy!!!

There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695

APEX2.0 on 9i not working anymore after installation of 10G database

Hello,
Up to last saturday I used APEX 2.0 on my 9i database (on Windows XP) without problems. I have several applications running and used them saturday for the last time.
Saturday I installed Oracle 10G Enterprise Edition on that same machine. I installed ONLY the software for the RDBMS, not even APEX. Later on I created my first 10g database via DBCA. Notice that I didn't do anything with APEX on that 10g database yet. I only installed the RDBMS software in a 10g home directory and created a database. That's all. No apex installed, nothing from the companion CD, only the RDBMS software in its own home.
Yesterday however, after a reboot of the machine, I could not use my applications running on the 9i database anymore: "the page cannot be found".
HELP!!!
What was changed by the installation of 10g that now causes that my applications cannot be accessed anymore? The 9i database runs OK, so that's not the problem.
I did already change the PATH settings, so that the 9i paths are checked before the 10.2 paths, but that did not solve the problem.
Has the installation changed something in the registry of XP perhaps?
Best regards,
Jan.
Best regards,
Jan.

Hi all, in answer to the above suggestions:
No the 10g database and listener is completely down (no services belonging to the new 10g database are running). I checked also alle the logs, but no messages anymore since saturday.
What I did notice: Oracle92HTTPserver (a service normally started automatically) does not start. When I start it, it gives me a message that there is nothing to do and that the service therefore is not started. So the HTTP-server itself is not working anymore. I can't find any files changed by th installation in the Ora92 home Apache directories. All seems as it was before the installation And still it won't start....
Does anybody have other suggestions? Please help.
Thanks in advance,
Jan.

Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It ca

Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It can not be stored because the nam is invalid" With 2. trial it tells me that the data is blocked and I don't have the rights - and I should chenge them. But I am working as the Admin on my PC - and each trial to change the rights of the data is as well not possible because of missing rights - even I am Admin! I must always store the data with a new name, then it works, but I also cannot remove the old datas or shift them into the waste paper - because of no rights! -- sorry for not perfect english, I am German native speaker! Tahnks a lot for help!

Hi,
I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
The issue I did describe above, but it was a long explanation.
In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
More explanation I gave above.

Qosmio G40: Toshiba Assist, StartLiveTV,Dolby (others?) not working anymore

After installing Win7 Ultimate including all latest drivers downloaded from the Toshiba website, the following applications do not work anymore:
1) Toshiba Assist
The application (TInTouch.exe) loads but ends up with a blank screen.
2) TV button linked to TV
The StartLiveTV.exe application is loaded, it appears in TaskManager, but closes automatically not doing anything. When running Vista it launched Windows Media Center.
3) Dolby Button linked to Dolby
This should launch C:\Program Files\Dolby\Dolby Control Center\DolbyVistaConfig.exe but the application is gone and i cannot find a replacement on the Toshiba Website. (Latest sounddrivers are installed but Dolby application is missing)
Any thoughts on the 3 topics?

Yep,
1) TVAP
i already removed the TVAP, downloaded it again and installed it again.
2) BIOS
I'm at the latest Bios, v2.20

I spill all my coffee on my new MacBook Air, its not working anymore, what should i do ? I have to buy a new one coz its pricy to fix it.

I spill all my coffee on my new MacBook Air, its not working anymore, what should i do ? I have to buy a new one coz its pricy to fix it.

Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.

Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

Please take the Mac to Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

Muse not working anymore

Hello, Alex here
since the last update Adobe Muse is not working anymore for me. The sites open normally but then the Master Pages don't load properly and it freezes all the time.
Does it ring a bell for someone?
Thanks a lot in advance.
Alex

Hi Alex,
Could you please let me know,
1. What is the size of your .muse file?
2 Try to duplicate the .muse file, open it, and try to reduce child pages, and see if you get some improvement.
3. Do you have asset on Network drive, if yes, add these asset to local drive and then use them, see if that helps.
4. Are you using Mac/Windows?
Please let me know these details, and I will try to investigate.

Satellite U400 - the webcam does not work anymore

Hello guys here is my sudden probloema!
About a year ago I purchased a laptop
TOSHIBA - Satellite U400
with s.o. WinVista 32bit and with integrated webcam chicony etc. ....
For a year, everything worked correctly, but for some days now, the webcam does not work anymore.
As soon as I try to open it, a message of management software cam that says "Webcam driver open fail, please restart or computer room"
I tried to do it all: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam ....! updated bios notebook ....! useless!
the strange thing .. well that going into device manager ... the webcam is not there ....! but if the launch seems to open just then check quell caz ... Warning!!
Gan you help me?
Graziee

Are you familiar and comfortable with LINUX LIVE bootable discs to load an alternative operating system with unobtrusive but extensive Toshiba device support so you can determine if your webcam hardware is ruined or if the problem is software and possibly solved reinstalling Windows ?
At this point, you're pondering less time consuming but more expensive choices such as buying another web cam, or another computer and you might be temporarily borrowing someone else's web cam / using a non preferred spare web cam that isn't optimal for your needs.
Continuously downloading software, registry cleaners, and repeatedly reinstalling drivers will eventually ruin your Windows installation and consume more time than you've wasted so far and still doesn't guarantee to fix your malfunction.

TouchPad lock key does not work anymore on Dell XPS L401X

Hi everyone,
On my Dell XPS L401X laptop, there is a key to lock/unlock the touchpad. It used to work fine on Windows and on new fresh install ArchLinux, but now it does not work anymore. If I remember correctly, I did not change, configure any shortcut so far.
Any hint to fix this problem?
Many thanks!
Tinh

Try mapping the button as shown here: https://wiki.archlinux.org/index.php/To … are_Toggle
I'm sorry i can't help more.

TV does not work anymore on Qosmio G10

Good morning,
TV does not work anymore, may be due to an update. It has been working OK before.
When selecting TV option 'TV direct ' with MCE menu, I get the following error message: "necessary files for video display are not installed or do not work properly, restart MCE or the computer". Restarting MCE and / or G10 does not solve the problem.
-Intervideo WinDVD creator is installed.
-TV PCI tuner seems to work properly (as per hardware status)
Which files can be missing? What needs to be done?
Any help, suggestions, well appreciated.
Thank you to anyone answering this message.

Hello Luciano
Like you know on this way it is not easy to give you precise answer because we dont know what did you done exactly with your Qosmio.
Please try to use System restore tool at first and roll back the operating system to earlier time. Maybe this will help you and the MCE configuration will be as before.
Try it at first.

Trace("anything"); //Not working anymore

Similar Messages

Maybe you are looking for