Trace movement type 105 for MBLNR
Hi all,
I m generating a report in which i have to capture mblnr whose movement type 103 has been done but movement type 105 has not been done.
For ex:
PO(ebeln) GR No(mblnr) Movement Type(bwart)
23000774 5000473054 103
PO(ebeln) GR No(mblnr) Movement Type(bwart)
23000774 5000473055 105
How can i trace that Movement Type 105 has been done for mblnr 5000473054 .Is there any field/reference doc populated,
when 103 movement type is converted into movement type 103.
<REMOVED BY MODERATOR>
Savita
Title edited by: Alvaro Tejada Galindo on Jun 12, 2008 7:00 PM
Savita,
We too have been dealing with the same problem. In fact my report gives me the expected result for local POs but not for Import POs. Reason bieng the LFBNR field of MSEG gets populated with the MBLNR in case of local POs but not for Import POs, because in case of Import POs MIRO for Custom Duty etc. takes place before 103 and 105.
This seems to be a problem with the configuration of these movement types or business process with most of the Indian industries. In my view it requires change in the business process in case of Import POs.
Thanks & regards,
Alok.
Similar Messages
-
Find Material Document with Movement type 103 for material document 105
Hi experts,
In PO History, I have three line items with movement type 103 (Blocked Stock) and one with movement type 105 (From blocked stock to unrestricted stock). I would like to know the material document with movement type 105 document that has the movement type 103.
Regards,
AbdullahHi,
you can get the material documents (mblnr) for the movement type(bwart) in table AUFK.
But i think you need to pass some other data along with bwart like matnr or aufnr for getting the correct mblnr.
Regards,
Chaitanya -
Function modules to create a movement type 105 and 104
Hi folks,
I have created a custom screen and attached to MIGO Transaction. If my user enter data and click 'PASS' on my screen, a movement type 105 to be triggered in back ground. And if he click 'FAIL', movement type 104 need to be triggered. is there any BAPI or Function Module to create goods movement type. I have searched some function modules in SE37 and found some stuff. But i am confused which one to use...Could you pls guide me regarding this...
for ur information, i am thinking to use these FM's
MB_READ_GOODS_MOVEMENT
MB_CREATE_GOODS_MOVEMENT
MB_CANCEL_GOODS_MOVEMENT
Will it be useful for me.
Thanks in advance,
Shyam.
Edited by: shyam prasad on Jan 7, 2009 10:24 AMHi
Yes you can use this function modules.
Thanks & Regards
Kishore -
Invoice is referring to mov type 105 instead of 103
Dear SAP gurus,
In my company, when we receive goods from PO we first post material doc 103 and then release it afterward using mov.type 105, and the accounting document is created. We just found out that when we post the invoice, actually SAP is doing reference to material doc 103 instead of 105. This is a problem for us as we want to build an interface for the invoicing process. In the process, only material doc 105 will be printed, signed and given to vendor for proof of delivery, thus this is the document that will be used by vendor to invoice.
The problem is that during the interface coding, when it is posted actually SAP is looking for the 103 doc number instead of the 105 doc number, while the only doc input to the application is the 105.
Is there any way we can set so that the invoice will be referring to the doc 105 instead of 103?
Best regards,
JohnHi
As per my understanding you can do invoice for GRN with mvt type 103, but system will not propose the GRN quantity and value as default. You have to manually feed the data. If there is DQ tolerance limit (OMR6) set in system then you cannot post invoice. On otherhand once blocked stock is released then you can directly post MIRO without any problem.
All that you need is GR based IV check in PO and also DQ (GR quantity set limit on MIRO quantity) in OMR6.
Thanks -
Use of Movement type 103 for goods confirmation
Hi All,
In SRM, as I understand, It always picks up 101 as Goods Receipt movement type during goods confirmation. But we want to use 103 as movement type instead of 101. Also we want to release from GR blocked stock using movement type 105 from SRM itself. We dont want to go to SAP Backend to release the blocked stock.
SO can you help me with the following:
1. How to change the movement type for GR from 101 to 103.
2. Can the release of blocked stock using 105 can be carried out from SRM?
Regardshi,
your requirement is not possible in SRM.
In SRM there is no movement type concept .It is only is ECC6.0. Even the movement type 101 is also not appearing in
SRM. In the ECS (Extended Classic Scenario) after confirmation is done in SRM ,the movement type 101 is reflected in ECC6.0
similarly 102 - Return dely can be done in SRM.
But you can try..
Check the program for doing the confirmation in SRM.Try to modify the Program to suit your requirement.
Regards
G.Ganesh Kumar -
Make movement type relevant for BW Purchasing Extractor
How do I make a movement type relevant for a Purchasing extractor? Specifically 2lis_02_SGR.
The SAP functional team (I am on the BW team) started using movement type 161 and 162 for goods receipts. They set up the movement type in OMJJ in ECC. But it does not flow into BW via the 2lis_02_SGR extractor.
I went into the Transaction Key for BW and added 161 and 162 and now they show up in the table - V_TMCLVBW / TMCLVBW, but they are not flagged as statistically relevant. I have tried to go to tcodes MCB0 and MCB_ but get an SAP error "
View/table V_TMCLBW can only be displayed and maintained with restrictions
" and I do not know what this means or how to get past it so I can edit the table.
I have tried resetting up the initialization tables for Purchasing, but the movement types still do not come in the extractor. I think this is because the table still does not have these movement types flagged as statistically relevant.
Thanks
JeffI have gotten a developers key, so I was able to make V_TMCLVBW editable via MCB_ but this still brings me back to the change view for transaction key maintenance for transfer into BW. But I still can not figure out how to make the movement types relevant for BW.
-
Blocking Movement type 122 for T code MBRL
All SAP Gurus,
I want to block the movement type 122 for T code MBRL.
For this I used T code OMJJ, but here it is not showing MBRL as used T code.
If MBRL is not specified in OMJJ for 122, then how MBRL T- code is allowed for movement type 122.
Please give ur valuable inputs.
Regards,
Edited by: Rajan R. on May 19, 2008 10:22 AM
Edited by: Rajan R. on May 19, 2008 10:59 AMCheck the all authorization roles you have created for inventory management. In there you can take out MBRL from the list. Then, create a new role for transaction MBRL only, and then you can allow other movement types for this role except 122. Assgin this role to your users.
This is what I have done at two client locations. -
Block Movement type 122 for T code MBRL
All SAP Gurus,
I want to block the movement type 122 for T code MBRL.
For this I used T code OMJJ, but here it is not showing MBRL as used T code.
If MBRL is not specified in OMJJ for 122, then how MBRL t code is allowed for movement type 122.
Please give ur valuable inputs.
Regards,
Edited by: Rajan R. on May 17, 2008 3:22 PMHi
Thanks for the reply
Now I want to block movement type 122 so that it can not be used throuh MRRL, is it posssible and how to do that?
I have alredy blocked MIGO for movement type 122
Edited by: Rajan R. on May 17, 2008 3:51 PM -
Change the inspection stock of material 16 in QM only Movement type 105
Hello,
I am trying to do GR with Movement type 105 and gettig the error message " Change the inspection stock of material 16 in QM only"
When I change the stock type from Quality to Unrestricted during 105 movement type, then I do not get this error message.
Scenario : I want Inspection lot to get generated with movement type 103 and not with movement type 105. And with my current settings, Inspection lot is getting generated with 103 and not with 105.
I want that, if I do GR with movement type 105, then the stock should go directly to unrestricted stock and not to Quality stock. BUt currently, it is giving me above mentioned error message.
Thanks and Regards
Prabhjot SinghCan you explain your business scenario.
Here is how standard SAP process is
1. Use movement 103 movement to receive PO in GR blocked stock
No inspection lot is created
2. Move material from GR blocked to own stock using 105 movement
This movement is identical to 101 movement. SAP will create Inspection lot if QM is activated. -
Blocking Movement type 309 for perticular user ID
Hello,
We want to block Movement Type '309' for perticular user ID.
How this can be achieved?Hi,
You can do it through autherization control ,
For Object
M_MSEG_BMB Material Documents: Movement Type
M_MSEG_BWA Goods Movements: Movement Type
M_MSEG_LGO Goods Movements: Storage Location
Revove the Movement type 309 , for the particular user.
Regards
Manish -
BAPI_GOODSMVT_CREATE with movement type 105
Dears,
notice below case
For one po and item, there are 5 GI with mov. type '103' .
1. 103 -- quantity: 1.
2. 103 -- quantity: 1.
3. 103 -- quantity: 1.
4. 103 -- quantity: 1.
5. 103 -- quantity: 1.
now i want to use BAPI_GOODSMVT_CREATE to create GI with 105 mov. type. then i put one item with quantity 3 in the 'GOODSMVT_ITEM' , but it gives error ' exceeded by 2 quantity' (Message ID: M7 - 022).
so i want to know if i should put 3 items with quantity 1 independently in 'GOODSMVT_ITEM' , then it will create material document.
BR.Hi,
I have completed this task of my own.. Please check the below solution..
You need to populate these fields .
item-entry_qnt = ls_ekbe_103-wesbs.
item-ref_doc_yr = ls_ekbe_103-lfgja.
item-ref_doc = ls_ekbe_103-belnr.
item-ref_doc_it = ls_ekbe_103-buzei.
This will post 105 movement of purchase order taking against 103 material document as reference document.
Thanks,
PrakashBabu -
Movement type error for Service Processes
Hi All,
We are working on service scenario with CRM5.0 and R/34.6c.
The problem that we face is as follows,
Whenever we make a service confirmation with products with item cat group BANC the movement type is correctly determined as 261 but whenever our service confirmation contains the products with item category NORM, the R/3 system returns the error that the movement type 291 is not found for the business area.
Regards
Rekha DadwalThe error was due to the material type. We changed the material type and now it works fine
-
In Physical Inventory Check_Which movement type used for stock difference.
In Case of Physical Inventory we are getting the stock differences after count results, Help me in doing the transaction thru which the stock is adjusted and which Movement types are used for the difference posting, What all documents are created in the process.
The system has Warehouse Management in place, so please answer in reference to WM.
How the Bin is identified in that case if there is stock addition.
Thanks in AdvanceHI,
Check for your ware house physical inventory process in spro whether it is done through continuous inventory process or Through annual inventory process.
SproLogistics execution-WM>Activities->Physical inventory--> Define types per storage type
PZ-Continous inv
ST-Annual
Regards,
velu -
New movement types required for Consignment
Hi Friends,
Need help related to Consignment Movement Type:
in Fill up Process KB/CF my client wants the goods to be in 'Transit' and then next step to Fillup.
Similarly in returns, we wanted the goods to be first to be reflected in 'QI' (MMBE/MB58) and then to be moved to consignment stock.
unline 631/634..are there any movement types that can fix this issue?..if we have to create a new movement type what type can be copied and stored for my client specific requirement.
Thank you
Ravi1) my client wants the goods to be in 'Transit'
2) WE used standard process
If the second comment cited above fulfills the first one, can you please let me know how you have achieved this. To the best of my knowledge, in consignment fillup process, we cannot see the "Stock in Transit". Once fillup delivery is made via 631 movement type, the unrestricted stock moves to "Cust.consignment".
thanks
G. Lakshmipathi -
Movement type authorisation for different storage locations
Hi sdners
can we make the movement type restricted to any storage location
Ex: i have 2 storage locations 1110 and 1114 in plant 1100
and i have two end user mst1 mst2
if so i want to make sure that mst1 is responsible only for issue goods from 111o
and he should not able to issue goods from 1114 vice versa to mst2
is there any possible configuration please let me know.
With regards
S.K.chaitanyaHi
u can achive this through authorization
First
You need to activate the storage location authorization check for goods movements in config
SPRO->Materials Management->Inventory Management and Physical Inventory->Authorization Management->Authoization check for storage locations.
Then required control is achieved via authorization object M_MSEG_LGO.
Get in touch with Basis and ask him to remove required storage location from user ID so that that user will not able to pass any movement to that storage location
Vishal...
Maybe you are looking for
-
Solaris 8 & Keyboard Problem on DELL Inspiron Laptop
Hi all, Trying to install Solaris 8 on Dell Inspiron 4000 laptop, but the keyboard gets stuck at the stage where I need to select the language. No response to keyboard and the machine just hangs. The keyboard works initially, I used the F2 key to con
-
Error message - and iTunes will not play anything at all
After scouring forums for similar issues, I have tried a complete uninstall and reinstall of iTunes with MacAfee firewall disabled. Nada. iTunes starts with an error message saying 'Configuration error, audio and video files may not play back correct
-
Reg: Data getting repeated in the table and displayed in the Smartorm.
Hello Experts, Requirement is to display header data from kna1table and item data from two tables faglflexa and bsid. Layout is something like this. Name and Address is capture from KNA1. Item Details from faglflexa and BSID based on one condition, U
-
Envelope printing proble on HP C7280
When I try to print an envelope on the printer I keep getting the message paper mismatch. I have set it up correctly, and can see a preview but I still get the message. I finally got it to print but the print was very small and not the right font s
-
Hi All, I want to hide my backup script(oracle 9iR2). For this I want to embed my script into a procedure, so that I may wrap it. May we put RMAN script in a PL/SQL procedure? Thanx