Trace on layer not allowed by net settings

I can't get Ultiboard 10.1 to let me run traces on the bottom side of the board even after checking the box in the Misc tab of the netlist editor (that was strangely unchecked for the first time anyway). I tried deleting the traces and laying them again, closing the design and starting it up again, closing & opening Ultiboard and I'm getting nowhere. What happened? I've been working with the design suite for almost 4 years and never seen this before. Thanks
Solved!
Go to Solution.

Thank you very much Sharanya R. I have attached the Ultiboard file as well as the security copy (API_Lunchbox1.ewprj)  in case that provides any more data. I suspect there is an errant setting somewhere, because none of my earlier work has encountered this trouble. Very perplexing... Thanks again Tod
Attachments:
API Lunchbox.ewprj ‏554 KB
API Lunchbox1.ewprj ‏555 KB

Similar Messages

  • On a layer not allowed by settings

    I have a board with dozens of the following errors reported by DRC:
    The object "Trace width (nn.nnn mil) Layer (Copper Bottom) Clearance (n.nnnn mil) Net (3P3V)" is on a layer not allowed by the net settings
    and
    The object "Trace width (nn.nnn mil) Layer (Copper Bottom) Clearance (n.nnnn mil) Net (GND)" is on a layer not allowed by the net settings
    It is a two layer board. Is the program trying to tell me I can't route power and ground on the bottim layer? That would be insane!
    Cab anyone explain this? I have found nothing in the documentation.
    What are the "net settings" and where can they be found? How can they be changed?
    Phil
    Solved!
    Go to Solution.

    Hi Phil,
    The Net Settings can be changed in the spreadsheet view or under Tools>Netlist Editor
    The error doesn't mean you can't route power and ground on the top and bottom layer.
    Please check the Routing Layers and Trace Width columns  in the spreadsheet view under the Nets tab to make sure the traces you routed are complying with the defined settings.
    Mahmoud W
    National Instruments

  • Unable to rotate pdf with script(not allowed error security settings prevent  error)

    I am using a script to rotate each pages in pdf file when clicking a button. I have added a script to rotate file in the rotate button's click event as a javascript.It is working in acrobat but not in adobe reader. Pleae see the script
    nStart = 0;
    nEnd = this.numPages - 1;
    nRotate = 90;
    try
    if (this.numPages > 0)
               this.setPageRotations(nStart , nEnd , nRotate)
    catch(e)
    app.alert("Processing error: "+e)
    But I'm getting this  error in adobe reader not in acrobat.'not allowed error security settings prevent access to this property or method'. What is the problem. Please anybody tell me.

    I have got it working usig by installing a script on the local machine. Thanks

  • Page rotate script not working(not allowed error security settings prevent access to this property)

    HI,
    I am using a script to rotate each pages in pdf file when clicking a button. I have added a script to rotate file in the rotate button's click event as a javascript.It is working in acrobat but not in adobe reader. Pleae see the script
    nStart = 0;
    nEnd = this.numPages - 1;
    nRotate = 90;
    try
    if (this.numPages > 0)
               this.setPageRotations(nStart , nEnd , nRotate)
    catch(e)
    app.alert("Processing error: "+e)
    But I'm getting this  error in adobe reader not in acrobat.'not allowed error security settings prevent access to this property or method'. What is the problem. Please anybody tell me.

    OK, so here's what you do:
    - Create a new file in a plain-text editor (I recommend Notepad++), and paste this code into it:
    safeExecMenuItem = app.trustPropagatorFunction(function(code){
        app.beginPriv();
        app.execMenuItem(code);
        app.endPriv();
    mySafeExecMenuItem = app.trustedFunction(function(code){
        app.beginPriv();
        safeExecMenuItem(code);
        app.endPriv();
    Close Reader if it was open and then save this file as "MyScripts.js" and place it in the following directory (this is for Windows):
    C:\Program Files (x86)\Adobe\Reader 11.0\Reader\Javascripts
    If you want it to work in Acrobat as well place the file also under:
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Javascripts
    Now to rotate the pages clockwise attach this code to your button (in Acrobat, of course):
    mySafeExecMenuItem("RotateCW");
    And to rotate them counter-clockwise, use this code:
    mySafeExecMenuItem("RotateCCW");
    Open your file in Reader and the buttons should rotate the pages when clicked...

  • Airport Express setup not allowing shared net connection when on WDS

    Hi,
    I have an Airport Extreme setup as WDS Main and an Airport Express setup as WDS Remote. But Doing this I am unable to receive shared net connection from Extreme to Express using Airport Setup Utility. It will only allow networking and not internet.
    Any Ideas?
    Thanks

    Internet connection sharing must be set up on the main base station in your network, which would be the base station that is connected to your cable or DSL modem.
    Internet connection sharing must not be enabled on any of the remote base stations in your WDS. So... what I'm saying is do not touch the configuration of your Airport Express.
    Once you have enabled internet connection sharing on the main base station and the main base station has rebooted, then pull power for a moment to the Airport Express to force a reconnection to the base station.
    If you still have problems, please describe to us how your network is set up in detail. If you have a typical network with a cable/DSL modem connection to an Airport Extreme base station, and that base station and an Airport Express are configured to form a WDS, you have an extremely basic setup that the Airport Utility should have had no trouble configuring for you. It really shouldn't be difficult!
    Addendum - after thinking about your problem a bit more, I thought I should probably ask you to explain in more detail exactly what the symptoms are when you state that "But Doing this I am unable to receive shared net connection from Extreme to Express using Airport Setup Utility. It will only allow networking and not internet." Perhaps I'm not understanding the problem. Are you saying that none of the computers connected to your network are able to access the internet - but everything else on your network works just fine?

  • Thunderbird on Ubuntu; receives duplicate imap & pop3 for same user name- how to delete imap? (says 'in use', will not allow entry into Settings)

    Frontier is a telco that has changed to Yahoo mail recently.
    Thunderbird on Ubuntu 14 LTS behaves somewhat differently than on a Windows machine; I can open Account Settings and will see 2 duplicate account entries in the left panel, but when I clcik on either accounts Server Settings, I only get a blocking message that says "Account Name in Use. Please enter a different account name." I'm unable to determine which is imap or pop, or delete anything...
    Thanks for any help in advance!

    Update to my original discussion:
    If the problem persists, rinse & repeat steps from the original post.
    Alternate Solution: If problem still persists and your imap email is not syncing correctly, call customer support of your email provider (in my case it was GoDaddy). Tell them the problem and ask them to do a "ReSync". Make sure your imap email account is set up on your iPhone before they perform the resync. I tried this and its been a week since I had any problems. If you're lucky this could fix other problems that are not listed in this discussion thread.
    Good luck & Cheers.

  • Safari Issues: not allowing access to settings and system preferences

    I posted this somewhere else, but think it was the wrong place so am reposting here
    In the last couple of weeks, I have tried to reset my homepage in safari as it has somehow changed from what I have always had to the following apple page. http://www.apple.com/startpage/ I did not choose for this homepage, and am guessing someone else has clicked on something and by accident ( not me).
    I have gone into the internet and network section of system preferences and get a drop down message that these have been changed from an outside source. I click on ok to get out of that section and it will not close off and have had to force quit to get out of it. This has happened two or three times.
    I have also tried to access safari help to see if there is another way to change the homepage and although I am able to search and get results I cannot access the actual topic content.
    I have never come across this issue before and have no idea of what may be happening. has apple hijacked my homepage?

    Hi there,
    To stop the pop-up, Go to System Preferences: Security. Check the box next to "Require password to unlock each secure system preference." Then lock Security.
    Try this cure for Security update...
    http://discussions.apple.com/thread.jspa?threadID=1730909&tstart=0
    Cure for Security update...
    http://discussions.apple.com/thread.jspa?threadID=1730909&tstart=0
    http://discussions.apple.com/thread.jspa?messageID=8309498#8309498
    But Safari's Homepage setting is in Safari's Prefs...
    Safari>Preferences>General>Home Page

  • System setting does not allow changes to be made to object LSYS

    Hi
    Im trying to create the process chain in BW-Production System . Like im trying to delete the PSA data for one datasource in BI7.0 .
    Im using the 'Delete requests from the PSA' process type in the process chain . When i try to give the datasource name and source system name in the variant of 'Delete requests from the PSA' process type and save them , then it is saying that
    System setting does not allow changes to be made to object LSYS
    Why it is saying like that . But i can able to include the other process types in the process chain .
    regards
    mohammed

    Dear Mohammed,
    Since you are trying to create process chain in production system.
    Normally production system wont be open for development at any time. Why the system settings does not allow changes was, your production is not modifiable state.
    Check the settings in SE06. system would be non-modifiable for sure.
    in SCC4,  settings ->"changes to the cross customizing objects would be not allowed"
    These two settings/configurations would not allow any development or changes or edit or create in production.
    Please check with your basis folks and proceed further.
    Hope this would help you more in understanding

  • Save As - Not Allowed Security Error

    Hello,
    I have a script to save a livecycle form with a predefined path and file name.
    However there is a Not allowed Error: Security settings prevent access to this property or method.
    I am not sure why the security error is still there when a trusted function is used.
    Can someone please provide some assistance with the script to advise where it could be going wrong?
    mySaveAs
    = app.trustPropagatorFunction(function(doc,path){
    app.beginPriv();
    doc.saveAs(path);
    app.endPriv();
    myTrustedSpecialTaskFunc
    = app.trustedFunction(function(doc,path){
    // Privileged and/or non-privileged code above
    app.beginPriv();
    mySaveAs(doc
    ,path);app.endPriv();
    // Privileged and/or non-privileged code below
    myTrustedSpecialTaskFunc(
    this, "/c/temp/Leave Application" + Applicants_Name.rawValue + ".pdf");
    Any help will be greatly appreciated.

    http://forums.adobe.com/people/Niall%20O'Donovan
    Hello Jo,
    I have a referred to a Post by Niall O'Donovan in a Prior Post similar to yours,
    see if this resolves your Issue.
    ================================================
    You don't need this trusted function. It allows a form to access properties such as the login name, etc.
    // folder level JavaScript to allow access to the identity object properties
    trustedIdentity = app.trustedFunction( function (sProperty)
    var iProperty = "";
    app.beginPriv();
    iProperty = identity[sProperty];
    app.endPriv();
    return iProperty;
    The script in the .js accessing the fields in the form are not correct:
    var vDate1 = event.target.xfa.resolveNode(topmostSubform[0].Page1[0].Date1[0]).rawValue.toString();
    var vTime1 = event.target.xfa.resolveNode(topmostSubform[0].Page1[0].Time1[0]).rawValue.toString();
    Firstly the main page in the form is not named, which makes referencing it difficult. If you call the page "page1", then remember that javascript is case sensitive.It should look something like this:
    var vDate1 = event.target.xfa.resolveNode(form1[0].page1[0].Date1[0]).rawValue.toString();
    var vTime1 = event.target.xfa.resolveNode(form1[0].page1[0].Time1[0]).rawValue.toString();
    You will need to create a "Test" folder in the root directory "C:", as Acrobat will not create one for you.
    Lastly it will not work in Reader unless the form is Reader Enabled.
    ================================
    Reena

  • HT3228 When I try to send an email from my Iphone it will not send and tells me the recepient will not allow relaying.  The email will sit in my outbox and then at some point will send.  It sometimes takes days.  What is wrong with my settings?

    When I try to send an email either new, or reply on my phone I receive a notification that recepient will not allow relaying.  The email will then sit in my outbox.  At some point it will send but it is hardly dependable.  What is wrong with my settings?

    The collum to the right listed similar problems.  The solution appears to be that under smtp outgoing settings the user name and password are listed as optional.  I have not plugged in the information and it seems to be working.  However from my office it always allowed the relaying.  The true test will be when I try to respond later from the road.
    Thank you for your help.

  • I had my iphone 4s synced to itunes on my work laptop. The IT group at work stripped out that installation and will not allow me to reinstall. My iphone insists it has to sync to my work laptop itunes. How do I change iphone settings to look at an itunes

    I had my iphone 4s synced to itunes on my work laptop. The IT group at work stripped out that installation and will not allow me to reinstall. My iphone insists it has to sync to my work laptop itunes. How do I change iphone settings to look at an itunes installation on my personal laptop?

    dcotejr wrote:
    I had my iphone 4s synced to itunes on my work laptop. ... How do I change iphone settings to look at an itunes installation on my personal laptop?
    You cannot.
    By Design the iPhone can Only Sync to One iTunes Library at a time.

  • HT204053 in my iphone settings, my phone has not allowed me to change the apple id account i want to use for icloud

    in my iphone settings, my phone has not allowed me to change the apple id account i want to use for icloud
    im using another id for my purchases, which was the same one set for icloud, but i wasnt using icloud, now i made a new id, and want to set it for icloud, but its not offering me the chance to change it in icloud settings

    Welcome to the Apple Community Rozie.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

  • I'm trying to add wi-fi network on my ipod but when I access settings the WiFi is not bold so it will not allow me to select

    Im trying to update WFi on my ipod but when i slect settings and try to enter, WI FI is not bold and therefore will not allow selection.  What am I missing?

    Try the suggestions found here: http://support.apple.com/kb/ts1559

  • My itouch will not allow me to connect to my wifi.  It doesn't even let me get onto my wifi settings.  The button is unhighlighted as well so it won't even let me fix it or choose a wifi network!!!!!!

    My itouch will not allow me to connect to my wifi.  It doesn't even let me get onto my wifi settings.  The button is unhighlighted as well therefore it won't even let me fix it or choose a wifi network-any network!!!!!!  So i can't access NOTHING!!!!  Our other new itouch's work fine (im using one right now lol lol) so it isnt my wifi/router....  My itouch is old lol, I've had it for 4 or 5 years and it's cracked up etc...lol lol.  But it still works great, however, it was out of commission for the past 5 months cuz my computer was not working to sync it and it wanted me to "connect to itunes" and i couldnt at the time...(plug it in to sync)....  And now my computer and iTunes are working and the itunes software is updated as well.   So i have synced my itouch and said itouch is working and restored however it will not allow me to access my wifi settings.  The button is unaccessable and unhighlighted as i have stated above already and am in the process of syncing and restoring said itouch again!!!  Which should take another full day or two lol lol omg!!! 
    Please help :)
    I love my old itouch!!! :( and Miss it dearly lol :(
    Ty in advance for anybody's help with this matter.

    My itouch will not allow me to connect to my wifi.  It doesn't even let me get onto my wifi settings.  The button is unhighlighted as well therefore it won't even let me fix it or choose a wifi network-any network!!!!!!  So i can't access NOTHING!!!!  Our other new itouch's work fine (im using one right now lol lol) so it isnt my wifi/router....  My itouch is old lol, I've had it for 4 or 5 years and it's cracked up etc...lol lol.  But it still works great, however, it was out of commission for the past 5 months cuz my computer was not working to sync it and it wanted me to "connect to itunes" and i couldnt at the time...(plug it in to sync)....  And now my computer and iTunes are working and the itunes software is updated as well.   So i have synced my itouch and said itouch is working and restored however it will not allow me to access my wifi settings.  The button is unaccessable and unhighlighted as i have stated above already and am in the process of syncing and restoring said itouch again!!!  Which should take another full day or two lol lol omg!!! 
    Please help :)
    I love my old itouch!!! :( and Miss it dearly lol :(
    Ty in advance for anybody's help with this matter.

  • HT4436 On my touch I have an iCloud backup message asking me to check my settings, when I click on settings nothing happens and the screen goes black. It will not allow me to turn my touch on or off. What should I do to rectify this?

    On my touch I have an iCloud backup message asking me to check my settings, when I click on settings nothing happens and the screen goes black. It will not allow me to turn my touch on or off. What should I do to rectify this?

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

Maybe you are looking for