Trace recording cannot be activated for system

Hi All,
I am trying to record a dynamic TBOM from SOLAR01. When i am pressing the button to create TBOM, system is throwing me the below message "Trace recording cannot be activated for system".
I have checked all the prerequisite and the authorization requirements as mentioned in the post " SAP Community Network Wiki - Solution Manager - Prerequisites to TBOM creation from SAP TAO" and have assigned to the respective user. But still system is showing the same error message.
Please help to rectify this issue.
Regards
Mohar

Hi Mohar,
There is one note for this:
2005027 - Error message 'Trace recording cannot be activated for system XXX client nnn' when creating dynamic
Have a look at it.
Divyanshu

Similar Messages

IPhone 4s not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help

iPhone not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help.
When I connect iPhone to USB iTunes is giving me the above message. Please advise if you know the fix.
Thanks,
Lina1116

did you find a fix?

'Iphone may be damaged and cannot be activated for service'

Ive just bought a used iphone4. it arrived having been cleared and reset.
I connected to itunes and upgraded to the new software. Then it worked for half a day. Then a message came up saying i need ot restore the phone.
So i plugged it in again and at the end of the uprgrade sequence it comes up with-
'Problem with the iphone - may be damaged and cannot be activated for service' - please visit apple store.
Its obviously out of warranty and the apple store is a long way away. Ive only had it a day and im assured its never been jailbroken, dropped or water damaged.
I know loads of people have had this message come up and people have recommened going to the apple store. But before i make the long trek i just wanted to know if anyone ever came up with a solution to fix this and use the phone again.
Any help much appreciated. back on sh+tty blackberry!!

Thanks for the replies guys!
I cant access the phone it just stays on 'connect to itunes'
Could someone quickly explain how jailbraking an iphone could cause it problems? I want to email the person I bought this from and tell them why I think they have damaged it by jailbraking it.
I really appreciate this help bacuase ive shelled out £160 for this paperweight, Thanks.

I upgraded my 3gs to 5.01 and now I get the message "iPhone may be damaged and cannot be activated for service." Whats going on?

I upgraded my 3gs to 5.01 and now I get the message "iPhone may be damaged and cannot be activated for service." Whats going on? I can't activate my device. It is essentially bricked at this point

Same issue c'mon apple.

The iPad you connected is not recognized and cannot be activated for servic

Hi there,
Today I've received a replacement iPad (from Apple), and surprise surprise, when I connected it to iTunes for proceed with the initial setup, the following message arised
We're sorry, the iPad you connected is not recognized and cannot be activated for service.
We recommend you visit your nearest Apple Store for more information.
I've contacted with my local apple support, and they told me to try to reinstall the iPad entering in DFU mode. I did it twice, and both times the procedure went perfectly but once finished the above message appeared once again.
They have told me to send it once again for repair, but, someone knows how to resolve this ? I've sent my previous iPad ten days ago, and now, I will have to wait other ten and I'm a little bit dissapointed.
Well, thanks in advance and merry christmas for all of you.
julio

They should pay to overnight pickup and overnight delivery back to you since it's their screwup. Ask them!

"There is a problem with your device,We're sorry the device you connected may be damaged and cannot be activated for service. "

My problem is after i did a restore on my 32gb ipod touch i now get a error on itunes that says "There is a problem with your device,We're sorry the device you connected may be damaged and cannot be activated for service. " Please help

In the ipad discussion forums there apparently is a HUGE problem with people not being able to update to ios 4.3.3, it apparently locks up their devices and they are also getting the error "there is a problem with your device".... some are reporting the same problem with their ipod touch as well... it looks like it's a global issue
The forum is in the ipad section under the title of "There is a problem with your device".
I have dodged a bullet on this one since i have not updated my ipod's or ipad in the last couple of days.... i will hold off syncing to itunes until this issue is fixed... good luck, and spread the word if you can to get apple to listen

We're sorry, the device you connected may be damaged and cannot be activated for service. We recommend you visit your nearest Apple Store for more information. To find your nearest Apple Store, click here.

I needed to restore my phone to an earlier restore point because my notes were deleted after I restored I recieved this message
"We’re sorry, the device you connected may be damaged and cannot be activated for service. We recommend you visit your nearest Apple Store for more information. To find your nearest Apple Store, click here."
I need to get phone running asap abd do not want to go to Apple to talk with Genius.

That message will occur when you put in a NON-AT&T sim
just get the sim out and try again

Itunes says iphone is not recognized and cannot be activated for service

I have had some trouble trying to restore my iphone and recently I was asked to restore it again because the phone could not make or receive calls. After restoring my iphone I got this message on itunes and now I can only use the phone for emergency calls. Can anyone please help me?
I am not sure which model it is, I know it is an old one.
Thanks!

I reccomend a re-install of Apple Mobile Device components. This has happened to me with my iPod Touch before.
Apple has now echoed this advice in a Knowledge Base document (#306637) specifically for the issue where the iPhone or iPod Touch is not recognized by the host computer. This can be accomplished by the following platform-specifc processes
Mac OS X
Delete the following files
/System/Library/Extensions/AppleMobileDevice.kext
/System/Library/PrivateFrameworks/DeviceLink.framework
/System/Library/PrivateFrameworks/MobileDevice.framework
/Library/Receipts/AppleMobileDeviceSupport.pkg
then re-installing the latest version of iTunes.
Windows XP
Quit iTunes and disconnect the iPhone
Go to the Start menu, thenthe Control Panel and open Administrative Tools, then Services.
Select "Apple Mobile Device" then "Stop the service."
After it is stopped, click "Start the service."
Connect the iPhone again, launch iTunes and check for recognition.
Windows Vista
Quit iTunes and disconnect the iPhone
Go to "Start," then search for "Services"
In Programs, click "Services".
Select "Apple Mobile Device" then "Stop the service."
After it is stopped, click "Start the service."
Connect the iPhone again, launch iTunes and check for recognition.

TMS not active for system TST

Hi, Gurus,
A new system ECC5 is Installed, on the same system ECC6 is also present when I save STMS it took the Transp. Domain Domain_ECD which is ECC6 SID.
Regards,
Darshan...

Hi,
if you used oracle then
login as ora<SID>
sqlplus /@<SID>
delete from usr02 where bname = 'SAP*' and mandt = <client>
set "login/no_automatic_user_sapstar = 0" in your instance profile
restart the server
login with sap* and password pass
regards,
kaushal

Can't reactivate my iPad 1, (iPad is not recognized and cannot be activated for service) Help?!

I recently had to reset my ipad to factory settings but now it wont let me reactivate it on the ipad or through itunes. Already tried recovery mode and still getting the same error. Any suggestions or anyone had this problem and found a fix before?

did you find a fix?

Iphone 4 16gb shows message "Restore needed to make and receive call" after restore and update to IO6 iTunes says we're sorry the iphone you connected may be damaged and cannot be activated for service and advise to contact nearest apple store

My Iphone 4 was working perfectly fine it is factory unlocked and was never damaged or dropped ...please advise me if there is solution. My phone is out of warranty

I hope I am not alone with this problem of bricked...useless iphone 4 ...my phone was working perfectly fine untill last night and saw this message this morning to perform the restore .
I also called the tech support who had no idea about this problem , I seriously want to break this **** phone in peices but dont have money to buy a new samsung phone...so have no choice but to wait and see if the problem is resolved ...
From Ireland .

Bi_document maintained for system SAP_BW is not a repository

Hello,
In our Portal system, we recently applied SPS 15 (using JSPM and also via NWDI). After we applied, when we login to portal system (integrated with BI) and try to load/save BI documents, we get a pop up window saying "Property missing". Looking at error logs we see this
========================
Error in System Administration --> Monitoring --> Knowledge management --> Component Monitor --> Repository Managers :
error for bw_document
Configuration Error: Missing attribute: cacheid_lock, configuration node = component-config, location = config://local/cm/repository_managers/bw_document
error for bw_metadata
Configuration Error: Missing attribute: cacheid_lock, configuration node = component-config, location = config://local/cm/repository_managers/bw_metadata
==========================================
In the Portal System landscape, i have made sure that the prefix for BI document, KM and repository is "/bi_document" (without quotes) and also in the Repository manager above, the bw_document and bw_metadata also has the prefix as "/bi_document" and "/bw_metadata" respectively.
=========================================
We also see this error in the trace file
"Directory /bi_document maintained for system SAP_BW
is not a repository; only the highest level is being used in the configuration"
=========================================
We have opened OSS message, but SAP could not come back with anything yet. Any help is much appreciated.
Thanks a lot in advance
WR

Hi WR,
did you find a solution? We have the same error
Thank you
Best Regards

Destination system cannot be used for classic qRFC by activating integration models

Hi All,
I am trying to connect ECC Release 702 to SAP TM 8.0 but by activating integration models(CFM2) i got following runtime error:
Error analysis
    Short text of error message:
    Destination TMCLNT100 cannot be used for classic qRFC
    Long text of error message:
    Technical information about the message:
    Message class....... "SR"
    Number.............. 320
    Variable 1.......... "TMCLNT100"
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
any one has idea how to solve that?
Thanks a lot!
Kind regards
RW

RW,
I am definitely not an expert on SAP Transportation Management. However, maybe your destination system has been set up as bgRFC instead of qRFC?
bgRFC (Background Remote Function Call) - Connectivity - SAP Library
Best Regards,
DB49

Transaction type 100 cannot be used for activity 'Acquisition from invoice'

Hi
My user got the error message : Transaction type 100 cannot be used for activity 'Acquisition from invoice receipt w/ affil. comp.'
when post the invoice via MIRO t code for 98% of the total amount.
The posting was is related to affiliated company, & by right it should pick transaction type 153 but it is pointing to 100.
If user post 100% , no error.
Please advice.

Check any of the following notes:-
=> Note 972556 - MIRO: Incorrect movement type with affiliated companies
=> Note 1060719 - Error AAPO 176 for postings from Logistics without vendor
thanks
G. Lakshmipathi

RMAN duplicate target database for standby from active fails to create newname for system tablespace/datafile

When executing 'duplicate target database for standby from active' the system tablespace/datafile (datafile 1) is not cloned. All other datafiles clone successfully. The RMAN process aborts with the following errors while attempting to clone the system tablespace/datafile.
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
Here are the details:
Primary is 11.2.0.2 RAC database on an Exadata platform
Standby is 11.2.0.2 Single Instance database (same patch level as primary) on a Red Hat Linux box
This is an ASM to ASM duplication.
This is not unique to this database. We tried another database and go the same behavior - all datafiles clone successfully with the exception of the system tablespace/datafile.
We have traced the RMAN execution and it seems to fail when it is trying to assign a NEWNAME to the system tablespace/datafile.
We even issued an explicit SET NEWNAME command but RMAN ignored it.
We also shutdown the primary and started is up in mount mode thinking that something had ahold of the System Tablespace/datafile.
We also opened up the network firewall to allow permit any,any traffic.
We increased the max_server_processes
and added TCP.NODELAY=yes to the sqlnet.ora file.
There seems to be some artifact present in our Primary System tablespace/data file that is preventing it form being cloned.
checked all alert files grid, asm, and dbhome - no abnormal messages.
We are in the process of restoring the database from a backup but we would prefer to get this working using the 'Active Database' methodology

I successfully created the standby database using RMAN backup and recovery.
I started the managed recovery. Archive logs are being sent from the primary to the standby ( I can see them in ASM), but the standby is not applying them.
I get the following messages in the standby alert log...
Fetching gap sequence in thread 2, gap sequence 154158-154257
Tue Nov 26 16:19:58 2013
Using STANDBY_ARCHIVE_DEST parameter default value as USE_DB_RECOVERY_FILE_DEST
Using STANDBY_ARCHIVE_DEST parameter default value as USE_DB_RECOVERY_FILE_DEST
Tue Nov 26 16:20:01 2013
Fetching gap sequence in thread 2, gap sequence 154158-154257
Tue Nov 26 16:20:11 2013
Fetching gap sequence in thread 2, gap sequence 154158-154257
Tue Nov 26 16:20:22 2013
Fetching gap sequence in thread 2, gap sequence 154158-154257
Tue Nov 26 16:20:32 2013
Fetching gap sequence in thread 2, gap sequence 154158-154257
I don't see any MRP processes:
select process,
status,
    thread#,
    sequence#,
   block#,
blocks
7     from v$managed_standby;
PROCESS   STATUS          THREAD# SEQUENCE#     BLOCK#     BLOCKS
ARCH      CLOSING               2     154363          1        132
ARCH      CONNECTED             0          0          0          0
ARCH      CONNECTED             0          0          0          0
ARCH      CONNECTED             0          0          0          0
ARCH      CONNECTED             0          0          0          0
ARCH      CONNECTED             0          0          0          0
ARCH      CONNECTED             0          0          0          0
ARCH      CONNECTED             0          0          0          0
RFS       IDLE                  0          0          0          0
RFS       IDLE                  1     145418        121          1
RFS       IDLE                  0          0          0          0
PROCESS   STATUS          THREAD# SEQUENCE#     BLOCK#     BLOCKS
RFS       IDLE                  0          0          0          0
12 rows selected.
SQL> SELECT THREAD#, SEQUENCE#, APPLIED FROM V$ARCHIVED_LOG;
   THREAD# SEQUENCE# APPLIED
         2     154356 NO
         2     154357 NO
         1     145411 NO
         2     154358 NO
         2     154360 NO
         2     154361 NO
         1     145414 NO
         1     145415 NO
         2     154362 NO
         2     154363 NO
         1     145416 NO
11 rows selected.
I do have the archive logs that cover sequences 154158-154257
Crosschecked 38 objects
Crosschecked 62 objects
Finished implicit crosscheck backup at 26-NOV-13
Starting implicit crosscheck copy at 26-NOV-13
using channel ORA_DISK_1
using channel ORA_DISK_2
Crosschecked 2 objects
archived log file name=+RECO_XORA/nmuasb00/archivelog/2013_11_26/thread_2_seq_154377.344.832521989 RECID=29 STAMP=832521990
validation succeeded for archived log
archived log file name=+RECO_XORA/nmuasb00/archivelog/2013_11_26/thread_2_seq_154378.346.832521991 RECID=31 STAMP=832521993
Crosschecked 31 objects

Trace recording cannot be activated for system

Similar Messages

Maybe you are looking for