Traceroute does not work properly with IPMP

I know this question has been asked many times but i didn't find any solution for it. Traceroute does not work with IPMP configured as intended.
i have following interfaces configured on my system
nxge2: flags=201000842<BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 4
inet 0.0.0.0 netmask 0
groupname test
ether 0:14:4f:c0:1c:a
nxge2:1: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 4
inet 10.63.20.30 netmask fffffe00 broadcast 10.63.21.255
nxge2:2: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 4
inet 10.63.20.29 netmask fffffe00 broadcast 10.63.21.255
nxge3: flags=201000842<BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 5
inet 0.0.0.0 netmask 0
groupname test
ether 0:14:4f:c0:1c:b
now if i do
#traceroute 10.63.20.29
traceroute: Warning: Multiple interfaces found; using 10.63.20.30 @ nxge2:1
traceroute to 10.63.20.29 (10.63.20.29), 30 hops max, 40 byte packets
1 10.63.20.29 (10.63.20.29) 0.124 ms 0.036 ms 0.033 ms
it uses nxge2:1 interface instead of nxge2:2 and if disable the IPMP on nexge2 it works fine as expected
# traceroute 10.63.20.29
traceroute: Warning: Multiple interfaces found; using 10.63.20.29 @ nxge2:2
traceroute to 10.63.20.29 (10.63.20.29), 30 hops max, 40 byte packets
1 10.63.20.29 (10.63.20.29) 0.120 ms 0.034 ms 0.030 ms
Why is it so and how can i make it work with IPMP

Please refer to my reply in this post:
https://forum-en.msi.com/index.php?topic=252404.0
If you installed the proper Realtek HD audio driver, you should be able to find this.

Similar Messages

Hi, My iPhone 4s does not work properly with the sound.

Hi, My iPhone 4s does not work properly with the sound. It just ring. Any other app it doesn't make sound unless I have my headset or bluetooth. And it make me choose between "DOCK CONECTOR" or my "APPLE TV". Why? Or any sugestion plz

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

My iphone 5 does not work properly with Ford Sync,

Hi, My iphone 5 does not work properly with Ford Sync, everytime I pair the phone, Ford sync navigation system freezes and does not work !
Can someone help.

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

My Nokia N9 does not work properly with a camera a...

Hi guys! Some time ago I noticed that when I turn on the camera, a message appears "CAMERA NOT RESPONDING Close application?". Shortly after the camera is turned on. Almost is the same with the maps apllication. The message is "MAPS NOT RESPONDING Close application?", but the difference is that it does not work at all. Has anyone had such problem?

Thanks aspergerduy! Of course it was the first step which I made, but unfortunately it did not work. Anyhow, I read some discussion in the Forum and finally I fixed the problem. It seems that the problem is well known. Now my N9 works but I don't know how long it will be. Frankly speaking during reading the discussions I didn't expect so many problems incur by this phone set! It is so pity ...

Alu Keyboard does not work properly with OS Tiger 10.4.11

Hi Folks,
I bought a 'new' second hand wireless Alu Keyboard (apparely latest type). Unfortunately I do not get the hotkeys for media files, like 'play / stop' and 'quick forward - backward' or 'silence' and 'increase and decrease volume' working.
The system software does not allow me to adjust those keys, e.g. dashboard I could change to F4, where it belongs, but not the other ones.
I loaded the latest OS Tiger 10.4.11 and also the KeyboardSoftwareUpdate1.2.dmg already.
Any idea what I do wrong or what else can help?
Thanks and best regards,
Stephan
Message was edited by: mac_cognomen

Some of the latest keyboard & mouse hardware require OS X 10.5.x+ to be
running the computer they would be expected to work with, in order to have
all of their features and functions work correctly.
Note the product information in Apple Support for the questionable device
and see if the item info tells what OS is expected to be present for it to work.
Good luck & happy computing!

SQL command (with XPath) does not work properly with JSP

Hello everyone,
I try this SQL command on Oracle SQL Developer,
select filename,
extract(xml_col, '/Operation/Records/tabDetail/Vehicle_Level/text()') as Vehicle_Level,
extract(xml_col, '/Operation/Records/tabDetail/Vehicles_Closed/text()') as Vehicles_ID
from ope
where upload_datetime in
(select min(upload_datetime)
from ope
where (TO_DATE(TO_CHAR(upload_datetime, 'DD-MM-YYYY'),'DD-MM-YYYY'))
between TO_DATE('01-01-2008','DD-MM-YYYY') and TO_DATE('01-07-2008','DD-MM-YYYY')
HAVING (filename like '60-1-%')
GROUP BY filename);
It works properly, the result is :
FILENAME --------------------- VEHICLE_LEVEL --------------------- VEHICLES_ID
60-1-OPE-1.xml --------------------- 3 --------------------- 60-1-VEH-43
But when I try this command on JSP, the result is :
FILENAME --------------------- VEHICLE_LEVEL --------------------- VEHICLES_ID
60-1-OPE-1.xml --------------------- null --------------------- null
I don't want "null" value, but I don't know where is wrong. Please help me.
Thank you very much.
Orange Jasmin

If you know that the videos and music have been working before and that the ID3 tags are correct I suggest that you try to reinstall the phone software using Update Service.
http://www.sonymobile.com/gb/tools/update-service/
Let me know if these problems remains after reinstall.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

My web email page does not work properly with Firefox 4

Parts of the screen do not allow links to be accessed, such as folders, making it very difficult to navigate the site. This was not an issue with the older version of Firefox and is not a problem when I use IE8. The site is Ajax.

If you click on the "down" arrow in the Google search box and then move your cursor to the desired term in search history while still left-clicking on your mouse, and then hold the cursor over the desired search term for a couple of seconds, it works.
Clearly a bug that I hope they will fix.

IOS6: Beats Wireless Does Not Work Properly With Bluetooth

Half year ago, I spent 400 USD of my hard-earned money on a Beats Wireless headset (v2).... LOVE that headset... great sound when playing music and very good sound quality too when talking on the phone (iPhone 4S).
However, since "upgrading" to iOS 6, my Beats Wireless headset keeps on stopping when I play music (or skips parts of the music)... it is ANNOYING to say the least!
It's my understanding that it's a known problem, but WHY does Apple not DO anything about it??? The issue has been there for a long time now, and people who use Bluetooth in their cars have reported issues with using Bluetooth, too! Apple actually puts the lives of those drivers in danger by not fixing the problem!!
WAKE UP, APPLE!!!
I am just SO disappointed by Apple and iOS6... I am strongly comtemplating selling my iPhone and NEVER go back to an Apple product again!!!!!

I concur. I have the same problem with my Wireless Beats and my iPhone5. Skipping and disconnecting mid song. I'm hoping this will get fixed with the next update. Funny thing is, my other bluetooth devices, jaybird, LG soundbar work fine... I don't know who to point the finger at because it worked fine prior to upgrading my iPhone4 w/ iOS6.

Mail does not work properly with gmail

Hi everyone. I am a very recent switcher and the switching process was great and extremely easy, but there has only been one problem that I can't seem to solve. Getting Gmail to work with Apple Mail. I followed all the steps on gmail's website on, how to set up gmail for POP, and how to configure Apple Mail to work with gmail, but I still can't get it to download all my emails. It only downloads some old emails, marks them all as unread, and then doesn't act like I have any other emails(which I do). Under system preferences, I have the account type labeled as POP, the incoming mail server set to pop.gmail.com, my username and password set, and the smtp box set to smtp.gmail.com. Under server settings I have the server port at 587, the ssl box checked and the outgoing mail server as stmp.gmail, like I said before. Under the advanced tab of the accounts section of apple mail preferences, I have the account enable box checked, the include when automatically checking for new mail box checked, and down at the bottom, I have the port set at 995 with the ssl box checked. In gmail, under my forwarding and POP settings, I have it set, under the POP download section to: Enable POP for all mail(even mail that's already been downloaded). Also, the status is set to "POP is enabled for all mail that has arrived since 10/13/05(which was when i first got my gmail account). Like I said before, Apple Mail at first starting downloading all the mail in my gmail account and then stopped after about 1000 to 2000 messages which only got it to about mid-2006 or earlier. Yes, I've run software update recently, too. Does anyone know why it would not dowload the rest of my mail? All help is very greaty appreciated. Thanks.

I just put my gmail account in Apple Mail and it works fine - even transferring my old gmail messages. Maybe your problem is STORAGE - see this from Mail Help:
About .Mac Mail
.Mac Mail works with existing email clients like Mac OS X Mail, Outlook Express, and Netscape Communicator.
You can also check email when you're away from your own computer. All you need is a computer with an Internet connection and a supported web browser to check your .Mac Mail. To access .Mac Mail on the web using Mac OS X version 10.3 or later, use Safari 1.2 or later or Firefox 1.0.1 or later. If you're using Microsoft Windows XP, use Firefox 1.0.1 or later or Internet Explorer 6 or later.
Use POP or IMAP protocol to suit your working style and set up automatic email forwarding or replies.
Your email address is your .Mac member name followed by @mac.com, and the password for accessing email is the same as your member password.
Note: AOL recently added support for IMAP, so you can now read your AOL mail using Mac OS X Mail. You cannot use AOL's email program to read .Mac Mail messages directly, but you can set up your .Mac Mail account to forward email to your AOL account.
.Mac comes with 1 gigabyte (GB) of combined email and iDisk storage. .Mac trial members and email-only accounts get 50 megabytes (MB) of storage; Family Pack sub-accounts get 256 MB. You can designate storage space to your .Mac Mail account and your iDisk. For example, if you need more storage space for your email messages, you can set your .Mac Mail storage capacity to 800 MB and reserve 224 MB of storage for your iDisk. You can also increase your combined email and iDisk storage to a total of 2 GB or 4 GB by purchasing more storage. (If you have a trial account, email-only account, or Family Pack sub-account, you cannot increase your storage amount.)
Your .Mac Mail storage is automatically set to 512 MB unless you change it. You can't assign less than 15 MB of storage to your .Mac Mail account.
.Mac comes with 10 GB of data transfer per month and a 10 MB maximum message size. You can increase your monthly data transfer limit up to 250 GB per month by adding more storage space to your .Mac account. You can also purchase up to 10 additional email accounts. (Email-only accounts get 50 MB of storage space but no additional .Mac services, and Family Pack sub-accounts get 256 MB of storage space, but cannot purchase additional email accounts.)
If I had 2000 emails on my computer I would shut it down and never turn it on again.

HP computer will not work properly with an HP printer

I have the following two items that I am trying to use together:
- HP 23" TouchSmart Desktop, T6500 2.1GHz 4GB DDR3, 500GB HDD (Windows 7)
- HP OfficeJet 6500 Multi-Function Printer/Scanner/Fax
When I try to scan to Adobe Acrobat Professional 9.0, the document goes through the scanner, however the dialog box that I would expect (e.g. "Next Page" or "Done") never shows up. At this point, the system is unresponsive with respect to Adobe or the printer.
I suspect that it is waiting for the input from the dialog box that never showed up. I tried to move the other windows to see if the dialog opened in the background, however I am not able to select any of them (they remain frozen).
I contacted HP Support, only to have them tell me it must be the driver, and I have an "old" printer. (I did not realize that a 9 month old printer was considered "old"). I have tried all of the possible drivers that are available (original disk, downloads, other downloads from HP tech support), none of these resolves the problem.
In any case, they were unable to resolve the problem of having an HP computer work properly with an HP printer. (The printing function seems to work, just very slowly).
Has anyone else heard of this? Is there a resolution?

Update: I am still looking for a solution to this problem - the scanning portion of the Multi-function OfficeJet 6500 does not work properly with the HP TouchSmart computer.
I have not been able to find anyone in HP that can tell me when (or if) new drivers will be released for this printer.
I decided to investigate upgrading to a newer version of printer since HP told me the 9 month old printer I have was "obsolete", only to find that the identical printer is still on sale in many stores. Hmmm....
I feel like I am getting the run-around from HP.
I have since tried several more driver/software combinations, but every time I have the same problem (as described in the previous post).
If anyone has any ideas or suggestions, I would be most happy to hear them.
Thank you.

Color Context does not work properly

Hi,
I'm using MII 12.1
ColorContext does not work properly with Lights and Multilights. I did not test other grids.
For every match it shows black colored lights.
Is there a way to solve this problem?
Thanks.

Cemil,
There was a bug in the early versions of 12.1 for color contexting. Color context changes were made in the display template were not being saved. I would strongly urge you to upgrade to SP5 patch 1. However, if you want a very crude way to test if your contexting is working the way you want it to:
1. Export your display template
2. Find the color context section of the xml and change the settings to the desired color coding
3. Import your modified display template
4. Test
I do not recommend this as a short term or long term solution. It is a hack and should be recognized as such. But it will allow to test your configured display template's behavior.
Regards,
Mike

TS1702 When I update to IOS6 on my 4S Facebook does not work properly, the news feed never updates it only says no new storeys and shows a picture of an antenna. When I reset my phone and go back to IOS5 Facebook works fine. What's up with IOS6 ????

When I update my iPhone 4S to iOS six Facebook does not work properly the newsfeed doesn't load properly and I can never see what's going on all I see is a picture of an antenna and a little thing underneath it says no new stories when I reset my phone back to iOS 5 then it works just fine and I don't have any issues so there must be something wrong with iOS six that isn't letting Facebook load properly

No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
<Edited By Host>

After installing acrobat my Microsoft office package does not work properly, word will not open and in my email i can't select anything with the mouse

After installing acrobat my Microsoft office package does not work properly, word will not open and when I want to write an email in my outlook email i can't select anything with the mouse. so copy past en delete are not an option.@

Are you using any MS Office third party Add-ins? Test: Remove third party Add-ins other than PDFMaker. Test to see if the MS Office apps run afterward.
Did you attempt to repair MS Office? Test: Go to Add/Remove Control Panel run Repair.
Finally, have you tried testing to see if it's PDFMaker? Test: Use the Add/Remove Control Panel to modify the Acrobat installation to remove PDFMaker. See if MS Office applications launch and behave correctly?

Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

Many, many thanks for both of you Todd and Rick.
to Rick:
I suppose you mean the Color Settings in Project Settings as follows:
- Working Space: None
- Match Legacy ... Gamma Adjustments checked ON
But it does not correct the colors in effects. And checking or unchecking Make Movie/Output Module Settings/Color Management/Profile/Preserve RGB does not make any difference.
to both of you:
Those parts of the video image that does not have color effects are just fine. In these parts the color is preserved when reimporting to FCP. However, those parts having color effects (except Levels, as decribed earlier) have altered color results. So, only the parts having effects affecting color are misinterpreted in the image area. The mismatch is of course seen in AE, before making the movie.
What I ment with "Color Management not working properly" is that (instead of "disabling" it) Color Management does not seem to be able to correct this "misinterpretation" or difference in effect handling between AE 6 and 10.
So, would you have any solution for this problem?
Again, many thanks for your fast replies!

With IOS 8.0 on iPhone 4s calendar does not working properly

Hello,
after installing IOS 8.0 on iPhone 4s calendar does not working properly (is suspended). Could anyone advise ?
Thank you in advance,
Daniel

I've an iPhone 4s as well, I'm going to wait till most of my critical apps have had at least one update for "iOS 8 compatibility", then I might take the plunge...
Regards,
Shawn

Traceroute does not work properly with IPMP

Similar Messages

Maybe you are looking for