Traceroute not happening to ACE from Oracle Server

Hi,
Our ACE is configured in One-ARM Mode. I have Oracle Serverfarm been loadbalanced by ACE from where traceroute to ACE is not happening.
Oracle Server in VLAN 10 with Gateway configured at Core Switch: 10.10.10.21
VLAN 60: 10.10.60.21 in Core switch & ACE ip: 10.10.60.1
If from ACE i doa traceroute at one of the Oracle DB servers (10.10.10.5 & 10.10.10.6) it's going nicely. But sitting at Oracle DB servers if i do trace to ACE IP: 10.10.60.1 it gets dropped at Core switch: 10.10.10.21
This probem is not happening from any other Windows machines....
Can someone highlight....
Attached the ACE config...

some machine use icmp to do traceroute and others use udp.
Your oracle machine might be using udp and your core switch as a security acl to block this udp traffic.
G.

Similar Messages

  • How to insert data into local database from oracle server

    I am new in C#.
    I am trying to design a local database in my C# project and I am trying to sync my database with our oracle server. I can login using oracle server. But I can't insert data into my local database from oracle server.
    anybody can help me ...............
    thanks..............................

    You can use SSIS package for that
    Start a new Integration Services project in Business  Intelligence Development Studio/ SSDT. Add a new SSIS package with a data flow task. Add a OLEDB source to connect to Oracle server and add a OLEDB Destination to connect to your local database.
    Select tables for source and destination. On executing package source data will get transferred to your local database.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • When using panasonic remote2 app, videos shot on iPad appear upside down on the television.  This does not happen with videos from other sources. Any suggestions?

    When using panasonic remote2 app, videos shot on iPad appear upside down on the television.  This does not happen with videos from other sources. Any suggestions?

    Hi Steve
    worldweary wrote:
    Thanks again. I tried channel 13 and it seemed to work better, with less dropouts (albeit not perfect) but sadly my slightly ageing laptop wouldn't recognise the network at all with the Hub set to that channel, so I had to switch it back to 11!
    Will try the factory reset at some point to see if that improves things.
    I have the same issue with my iPad when streaming videos...like the issue posted on ‎25-04-2014 18h36 by Steve.
    Steve - Can you kinldy clarify how you resolved the problem finally.
    I was infact planning to change the iPad or sell it off due to this recurring problem.
    Thanks and regards
    Siva

  • Siri could not download required information from the server

    I'm getting the message "siri could not download required information from the server". I haven't been able to use SIRI for 5 days. Does anyone know an answer?
    I've tried turning SIRI off, rebooting, and turning it back on. You know, the old PC approach.
    I have an excellent WI-FI connection.

    Not an answer but I do know if I do not have a good internet connection (3G or WiFi) I get that same error. Has always cleared up for me once that was resolved.

  • Can not get an ip from pppoe server

    Hello,
    i have this problem with linksys WRT54GL it's can not get ip from server but the problem with with the router not the isp coz i used another router WRT54S it's work great,
    i'm using the last update for WRTS54GL V1.1 (4.30.14).
    THE PROBLEM FROM ROUTER I THING FROM THE SOFTWARE 
    IS THERE ANY SOLUTION FOR THIS ???
    THANKS 

    Thanks for replay 
    first the modem work as bridge 
    the router can not connect to the server 
    in status page the error is "can not get an ip from pppoe server" when i used the WRT54GL
    if i used other router (WRT54GS) it's connect and get ip and DNS on the status page 
    the user and password is correct .
    the router(WRT54GL)  work when i used DHCP  but not connect when i used PPPOE protocol 
    1.WORKING     modem(bridge)------>router (WRT54GS)PPPOE----------> Router (WRT54GL)DHCP-------> PC
    2.WORKING     modem(bridge)------>router (WRT54GS)PPPOE-------> PC
    3.NOT WORK   modem(bridge)------>Router (WRT54GL)PPPOE-------> PC
    i need the third scenario.
    i think the problem with the router not with the configuration.
    Thanks

  • Could not load servlet information from web server

    I am trying to register a servlet through the web object manager.
    As soon as click the web object manager menu pick I get the following
    error: Could not load servlet information from web server.
    On other peoples machines here it works fine and they can register
    servlets. What am I missing!

    You must be using Jdev 3.2.x, this is a known bug. In Jdev 9.0.2 we use the standard J2EE web.xml in order to register servlets. You should consider moving to the new IDE.

  • TS1402 I can not copy any files from the server & from the Finder. System MAC OS 10.7.5

    I can not copy any files from the server & from the Finder. System MAC OS 10.7.5
    <Email Edited by Host>

    Hi, what is the no boot directory found about???
    Can you give details step by step of what you're trying?

  • This message has not been fully downloaded from the server

    When opening an email in Microsoft Outlook 2007, a co-worker’s laptop occasionally receives this message: “This message has not been fully downloaded from the server. Would you like to mark it for download?”.  It’s an IMAP account that syncs with his new iPhone 4S. He never received this message when he had a BlackBerry.
    From reading online posts, the problem could be how the iPhone downloads the emails. One suggested resolution was to change when the emails/incoming messages delete from the server; however, my co-worker likes the fact that once he deletes an email from Outlook, it’s deleted from his iPhone and vice versa.
    Does anyone have a solution for this problem? Thanks, iPhone newbie

    I get that message too.  Its not a bug - its a "feature".  I only get it if the e-mail contains a bunch of graphics etc which makes the e-mail much bigger than a "standard" text only one.  I guess its there so you have the choice to download the rest of it or not.  Saves you money if you are charged for data downloads.

  • Application is not working when changing of oracle server domain name

    Hi friends
    We decided to change oracle server domain name due to some reason .. we changed the domain name but application running on the other server cannot connect to this domain i don't know whats the problem . I change the enterprise manager ( emca -config dbcontrol db -repos recreate_) according to the new domain but some of the future not working like date,etc. can anyone help me how to rectify it plz.

    Mohd khalid wrote:
    Hi friends
    We decided to change oracle server domain name due to some reason .. we changed the domain name but application running on the other server cannot connect to this domain i don't know whats the problem . I change the enterprise manager ( emca -config dbcontrol db -repos recreate_) according to the new domain but some of the future not working like date,etc. can anyone help me how to rectify it plz.I am really confused that what's not working? What I have understood is that you recreated the EM repository. So where does "some of the future not working like date,etc." come into it? Are you checking date from EM ? Which application is not working, your application or EM or both or somethingn else? Tell us the complete version, error information and also post the output of
    emctl status dbconsoleHTH
    Aman....

  • Mail is not downloading e-mails from the server

    Mail is not downloading e-mail from the yahoo server.  However, I am able to send e-mails out

    My problem with mail concerns gmail and not Yahoo.  But about once a day I see an email come in on my iPhone or iPad and then I wait for it to come in on my MBP, running Mavericks 10.9.2 with all the updates current.  It never does come in.  I find that by exiting from Mail and then in a few seconds opening it again that the missing mail will come in.  Also, I found that by taking the gmail server off line and then right back on line that the missing email will come it.
    I like to reply to my email from the MBP so that I have a record of the sent files.  Sending from the IOS devices doesn't let the MBP know about the sent file.
    This never happens under IOS 7.1 on my iPhone and iPad.  So I suspect it is a problem with Mavericks.
    I'm sure I'm not the only one having problems with this.   Is this a problem with Mavericks or with gmail?

  • Microsoft Security Essentials not taking definition updates from WSUS Server.

    Hi Experts,
    I have a WSUS server installed on network on which MSE definition updates are installed, but the MSE on the client computer is not getting updates from it.
    When I click the update button it gives me error "Virus and spyware definitions couldn't be updated".
    The error code i am getting is 0x80244018. The definition updates couldn't be installed please try again later.
    I also have TMG on my network as a default gateway, I want to update MSE from WSUS not from microsoft update.
    Do I have to change rules....??? or any suggesstions that how MSE can be automatically updated from WSUS, the WSUS setting is saved into a GROUP Policy and applied....
    Please advice......

    The error code i am getting is 0x80244018.
    This is an HTTP 403 error, which is generally (but not always) indicative of a proxy server interfering with the download. Assuming this is happening when the client is trying to get Definition Updates from Microsoft during the daily scan, this error will
    likely go away once you properly set up WSUS to provide the definition updates.
    I want to update MSE from WSUS not from microsoft update.
    To do this, you need the following:
    The Definition Updates classification must be configured for synchronization.
    An Automatic Approval rule that approves the Definition Updates classification for the appropriate target group(s) must be configured and enabled.
    The policy setting Allow Automatic Updates immediate installation must be ENABLED.
    Your WSUS server should be configured to synchronize multiple times per day (at least 2).
    Your clients should be configured with a shorter Detection Frequency (8 hours is ideal).
    With the above configured, the clients will check the WSUS server 3x-4x per day, find the latest available Definition Update, download it and install it immediately.
    Note, however, that if the client fails to download and install Definition Updates, MSE will continue to do a check, and attempt to update the Definition Updates during the daily scan. If your TMG blocks the client's Internet access, then they
    will continue to log HTTP 403 errors when this definition update attempt is executed. (This is why you configure multiple syncs and scans per day -- so the client *never* has to go to Microsoft to get the current definition updates.)
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • XML File not fully downloaded Fully from Application Server.

    Hi,
    I am downloading an XML file from Application server. It's only downloading partially. Below is the Declaration for target Internal table.
    DATA: BEGIN OF infile OCCURS 0,
            line(65535) TYPE c,
          END OF infile.
    SAP does not allow more than 65535 characters for a data type of type C. So its only downloading till that length.
    If I am using type as STRING, its downloading in different format. Also its not allowing me to put these data into internal table.
    Below is my code for downloading.
    OPEN DATASET p_unix IN TEXT MODE MESSAGE msg.
        IF sy-subrc <> 0.
          MESSAGE i001(38) WITH 'Error on Open of File: ' msg.
        ELSE.
          WHILE sy-subrc = 0.
            READ DATASET p_unix INTO infile.
            CHECK sy-subrc = 0.
            APPEND infile.
            ENDWHILE.
          CLOSE DATASET p_unix.
    Is there any way to convert string into XML format & put it in the internal table?
    Kindly suggest me any other way, so I can download the entire set of file into the internal table.
    Thanks,
    Debi.

    Hi ,
    Try downloading the file from the application server using the TCode CG3Y on your local machine.
    Then use the FM GUI_UPLOAD to upload the contents in an internal table.
    Thanks,
    Manish

  • Sender file adapter is not picking the file from windows server

    Hi Experts,
    We have a sender file adapter running on Unix server. Now we have changed the source directory path from Unix to Windows in file access parameters.  It is not picking the files from windows directory and not showing any error.
    In this scenario, input file for sender adapter is *.xml and no content conversion.
    Could any one please let me know is there anything needs to changed in file adapter.
    Thanks in advance,
    Sridhar. M

    Sridhar,
    What do you have in the directory path?
    If it is a shared drive in unix then the directory in windows should also be a shared drive from XI system. Else if it is FTP check the address.
    Regards,
    ---Satish

  • Outlook Calendar invite - Not able to send from exchange server.

    Hi,
       I am not able to send outlook calendar invite from exchange server. But if i installed outlook on my local machine/server it works fine. Below code the i used to build calendar invite for your reference.
      public static void sendOutlookInvitationViaICSFile1(EAppointmentMail objApptEmail)
                try
                    log.Info("Invite Started");
                    Microsoft.Office.Interop.Outlook.Application apptApp = new Microsoft.Office.Interop.Outlook.Application();
                    Microsoft.Office.Interop.Outlook.AppointmentItem agendaMeeting = apptApp.CreateItem(Microsoft.Office.Interop.Outlook.OlItemType.olAppointmentItem);
                    DateTime venueDate = Convert.ToDateTime(objApptEmail.VenueDate);
                    string formatedVenueDate = venueDate.Year.ToString() + "/" + venueDate.Month.ToString() + "/" + venueDate.Day.ToString();
                    DateTime from = Convert.ToDateTime(formatedVenueDate + " " + objApptEmail.FromTime);
                    DateTime to = Convert.ToDateTime(formatedVenueDate + " " + objApptEmail.ToTime);
                    System.Net.Mime.ContentType typeHTML = new System.Net.Mime.ContentType("text/html");
                    //Create the Body in HTML format
                    string strBodyText = "Type:Single Meeting\r\nOrganizer: {0}\r\nStart Time:{1}\r\nEnd Time:{2}\r\nTime Zone:{3}\r\nLocation: {4}\r\n\r\n\r\n\r\n{5}";
                    strBodyText = string.Format(strBodyText, objApptEmail.Email, from.ToLongDateString() + " " + from.ToLongTimeString(),
                                        to + " " + to, System.TimeZone.CurrentTimeZone.StandardName,
                                        objApptEmail.Location, objApptEmail.Body);
                    if (agendaMeeting != null)
                        Console.WriteLine("started");
                        agendaMeeting.MeetingStatus =
                            Microsoft.Office.Interop.Outlook.OlMeetingStatus.olMeeting;
                        agendaMeeting.Location = objApptEmail.Location;
                        agendaMeeting.Subject = objApptEmail.Subject;
                        agendaMeeting.Body = strBodyText;
                        agendaMeeting.Start = from;
                        agendaMeeting.End = to;
                        Microsoft.Office.Interop.Outlook.Recipient recipient = agendaMeeting.Recipients.Add(objApptEmail.Email);
                        recipient.Type = (int)Microsoft.Office.Interop.Outlook.OlMeetingRecipientType.olRequired;
                        ((Microsoft.Office.Interop.Outlook._AppointmentItem)agendaMeeting).Send();
                        log.Info("Invite Successfully End");
                        Console.WriteLine("End");
                catch (Exception ex)
                    log.Info("Error: " + ex.Message.ToString());
                    Console.WriteLine("Error: " + ex.Message.ToString());
    In exchange server/ not outlook installed server, i am getting below error.
    "Retrieving the COM class factory for component with CLSID {0006F03A-0000-0000-C000-000000000046} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG))"
    Help me to send calendar invite without installing outlook on the specified server. Please do the needful.

    Hi
    It is probably that the stuff you doing is for outlook and because outlook is not installed it cannot find the classes.
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • ADF faces client Demo application not able to download from oracle site

    Hi
    Why http://www.oracle.com/technetwork/developer-tools/adf/downloads/index.html  link from Oracle site shows blank area.
    I want to download source code for ADF Faces Rich Client Components Demo application.
    Can someone please provide direct URL for source code not war file.
    Thanks
    Vikas M

    Looks like the download is temporary down. Worked yesterday.
    Timo

Maybe you are looking for