Tracert Same IP in multiple hops

Hello all,
Can you please help me to understand why i am gettign same IP repated in trace route:-
tracert 103.1.191.10
Tracing route to 103.1.191.10 over a maximum of 30 hops
1    <1 ms    <1 ms    <1 ms 10.10.10.10
2    <1 ms    <1 ms    <1 ms 10.10.10.120
3    <1 ms    <1 ms    <1 ms 19.20.146.241
4     1 ms    <1 ms    <1 ms 38.100.34.8
5   193 ms     3 ms   207 ms 66.250.10.1
6     1 ms     1 ms     1 ms 15.54.30.225
7     7 ms     7 ms     7 ms 15.54.42.30
8     8 ms     8 ms     8 ms 15.54.47.30
9     8 ms     7 ms     7 ms 66.28.4.229
10     8 ms     8 ms     8 ms 15.24.2.22
11     8 ms     8 ms     8 ms 38.104.73.198
12   226 ms   226 ms   226 ms 19.227.108.133
13   279 ms   281 ms   279 ms 14.30.1.42
14   274 ms   275 ms   278 ms 10.10.18.243
15   275 ms   275 ms   274 ms 10.10.18.243
16   277 ms   276 ms   274 ms 10.10.18.243
17   275 ms   275 ms   275 ms 10.10.18.243
18   275 ms   296 ms   275 ms 10.10.18.243
19   275 ms   275 ms   276 ms 10.10.18.243
20   275 ms   275 ms   275 ms 10.10.18.243
21   276 ms   275 ms   275 ms 10.10.18.243
22   276 ms   275 ms   275 ms 10.10.18.243
23   275 ms   275 ms   275 ms 10.10.18.243
24   275 ms   275 ms   276 ms 10.10.18.243
25   276 ms   276 ms   276 ms 10.10.18.243
26   276 ms   276 ms   276 ms 10.10.18.243
27   277 ms   276 ms   276 ms 10.10.18.243
28   277 ms   276 ms   276 ms 10.10.18.243
29   279 ms   299 ms   276 ms 10.10.18.243
30   276 ms   276 ms   277 ms 10.10.18.243
Trace complete.
Thanks in advance
Jagdev

You're welcome,
If it is a Cisco ASA or Pix, the gloabl policy needs to be modified to accomodate traceroute. Cisco has an article on how to do so here.
Other vendors would need a similar remedy applied.
Please rate helpful responses.

Similar Messages

Report generation same Logo in multiple pages

hi all
In NI report generation (word) , how can i generate same Logo(small image) in multiple pages.
I can able to generate Logo in single page. but i am looking for generating same Logo in multiple pages.

HI
You can create the Word template file and place logo in header
Then generate report using word template file (you can use MS office Report express VI)
Hope this helps
Regards
Santosh

Save same bookmark in multiple folders without having to do it manually. Is there and add-on that can help me fix this issue?

If I have a bookmark in a folder and I save a new folder that may overlap with the old bookmarks the bookmarks from the old folder are automatically removed, this is a problem for me and I cant always manually go fix it.
If I have a folder named A1-D1 that has bookmarks A1, B1, C1 & D1
& now I am searching bookmarks related to A & want a new folder A1-A4 with bookmarks A1, A2, A3 & A4
when I save the new group of bookmarks it removes A1 from A1-D1, which is horrible.
& its very time consuming & frustrating to have to manually fix this every time.
I know Firefox did this on purpose to prevent duplicate bookmarking but this is worse than having the the same bookmark being repeated more than it needs to. Now when I am looking at folder A1-D1 i don't even know how many of them have disappeared & have to search all over again.
I hope they fix it soon.
Please let me know if there is an add-on that will prevent Firefox form ruining my bookmarks.

This extension gets around that limitation for me. <br />
https://addons.mozilla.org/en-US/firefox/addon/add-bookmark-here-2/
Really nothing to be fixed, that "feature" was added to Firefox 3 when the "Tags" feature was added to Firefox bookmarks. The concept is to use Tags to categorize a single bookmark with multiple Tags, instead of the user saving the same bookmark to multiple folders. I don't care for Tags and save the same bookmark to whatever folders I want it in using that extension.

Same photo in multiple projects?

Hi there. New Aperture user here so hope this isn't a stupid question. I was wondering if it's possible to have the same photo in multiple Projects? My understanding is that all photos are stored in my Aperture Library but the photos in the Projects are really just links to the photos in the Aperture Library. Is that correct?
I would like to have certain photos in multiple Projects, if possible. Thank you.
-Keith

Thanks William. Here is a broader question/issue then.
Right now I have 20+ Projects in the AL. Then I have multiple .Mac Web Galleries based off of certain Projects.
Should I create one "Master" Project, and then create 20+ Albums under that Master Project? It seems like that is what I was going for when I created multiple Projects in the first place. Albums are just links to the photo in the Project, correct?
If I do that, will I have to re-do my .Mac Web Galleries (since they are linked to those Projects, right)?
Also, not quite sure I understand your last reply regarding copying the Album? Sorry.

Apply Same Preset to Multiple Render Queue Selection

Hi,
I´m trying to apply the same preset to multiple render items on the queue panel.
What´s happening is: i select multiple render items on the render queue panel of Media Encoder, then select a preset and drag and drop this preset to alter all the render items (hopefully). But no..
With drag and drop even if i have a multiple selection the dragged preset only goes to on render item. If i select not the item name but the output name, the same thing happens.
If i make my multiple selection and double click on the preset name it does add the preset to all the selection but it does not replace one for the other.. (so i got 2 outputs presents when wanting only one)
Hope my explanation makes sense.
Its this feature existent on Media Encoder or am i doing something wrong?

Replacing an output via drag & drop only works on the output you drag the preset to, regardless of your current selection. Also, if you apply a preset with multiple outputs selected it always adds a new output, as you mentioned.
However, if you have multiple outputs selected and choose a different preset from the Preset popup menu in the Queue, all the outputs are changed at once which sounds like the behavior you want. You'll only see presets for the current format in the Preset popup menu so you may need to switch the Format popup first to see the preset you want.
I like the idea of replacing multiple outputs via drag & drop though, I'll add a feature request for this.

How to check empty string and null? Assign same value to multiple variables

Hi,
1.
How do I check for empty string and null?
in_value IN VARCHAR2
2. Also how do I assign same value to multiple variables?
var_one NUMBER := 0;
var_two NUMBER := 0;
var_one := var_two := 0; --- Gives an error
Thanks

MichaelS wrote:
Not always: Beware of CHAR's:
Bug 727361: ZERO-LENGTH STRING DOES NOT RETURN NULL WHEN USED WITH CHAR DATA TYPE IN PL/SQL:
SQL> declare
2    l_str1   char (10) := '';
3    l_str2   char (10) := null;
4 begin
5
6    if l_str1 is null
7    then
8      dbms_output.put_line ('oh STR1 is null');
9    elsif l_str1 is not null
10    then
11      dbms_output.put_line ('oh STR1 is NOT null');
12    end if;
13
14    if l_str2 is null
15    then
16      dbms_output.put_line ('oh STR2 is null');
17    elsif l_str2 is not null
18    then
19      dbms_output.put_line ('oh STR2 is NOT null');
20    end if;
21 end;
22 /
oh STR1 is NOT null
oh STR2 is null
PL/SQL procedure successfully completed.
SQL> alter session set events '10932 trace name context forever, level 16384';
Session altered.
SQL> declare
2    l_str1   char (10) := '';
3    l_str2   char (10) := null;
4 begin
5
6    if l_str1 is null
7    then
8      dbms_output.put_line ('oh STR1 is null');
9    elsif l_str1 is not null
10    then
11      dbms_output.put_line ('oh STR1 is NOT null');
12    end if;
13
14    if l_str2 is null
15    then
16      dbms_output.put_line ('oh STR2 is null');
17    elsif l_str2 is not null
18    then
19      dbms_output.put_line ('oh STR2 is NOT null');
20    end if;
21 end;
22 /
oh STR1 is null
oh STR2 is null
PL/SQL procedure successfully completed.
SQL> SY.

Bapi_po_create1 is giving same system messages multiple time in the joblog

Hi Experts,
Bapi_po_create1 is giving same system messages multiple times in the job log when we ran the program in the background
can u plz suggest how to prevent these multiple appearances of same messages.
I am pasting the code below whn i ran this program in backgorund job log is having the messages.
Date       Time     Message text                                                                 Message class Message no. Message type
08/06/2009 08:11:53 Job started                                                                       00           516          S
08/06/2009 08:11:53 Step 001 started (program ZZZTEST, variant &0000000000008, user ID BREDDY)        00           550          S
08/06/2009 08:11:54 Commitment plan contains no account assignment data                              MECP          020          S
08/06/2009 08:11:54 Commitment plan contains no account assignment data                              MECP          020          S
08/06/2009 08:11:54 Status "Initial Block" of material 20111 does not allow external procurement      ME           053          E
08/06/2009 08:11:54 Status "Initial Block" of material 20111 does not allow external procurement      ME           053          E
08/06/2009 08:11:54 Source not included in list despite source list requirement                       06           722          E
08/06/2009 08:11:55 Pricing/euro: Attention: Euro Customizing not maintained                          VH           777          S
08/06/2009 08:11:55 Pricing/euro: Attention: Euro Customizing not maintained                          VH           777          S
08/06/2009 08:11:55 Status "Initial Block" of material 20111 does not allow external procurement      ME           053          E
08/06/2009 08:11:55 Purchase order still contains faulty items                                       MEPO          000          E
08/06/2009 08:11:55 Job finished                                                                      00           517          S
Edited by: bhavani prasad kotharu on Aug 6, 2009 3:09 PM

HERE IS THE CODE OF THE PROGRAM, WE R JUST PASSING SOME PO DATA TO THE BAPI_PO_CREATE1,ON RUNNING THIS PROGRAM IN BACKGROUND SAME SYSTEM MESSAGES ARE APPEARED MULTIPLE TIMES,----
REPORT zzztest.
DATA :    lwa_bapimepoheader TYPE bapimepoheader
         ,lwa_bapimepoheaderx TYPE bapimepoheaderx
         ,li_bapimepoitem TYPE STANDARD TABLE OF bapimepoitem
         ,lwa_bapimepoitem TYPE bapimepoitem
         ,li_bapimepoitemx TYPE STANDARD TABLE OF bapimepoitemx
         ,lwa_bapimepoitemx TYPE bapimepoitemx
         ,li_conditions TYPE STANDARD TABLE OF komv
         ,li_return TYPE STANDARD TABLE OF bapiret2
         , n TYPE c
PARAMETERS: p1 TYPE c AS CHECKBOX.
IF p1 = 'X'.
lwa_bapimepoheader-doc_type = 'NB'.
lwa_bapimepoheader-purch_org = 'NA00'.
lwa_bapimepoheader-pur_group = 'C02'.
lwa_bapimepoheaderx-doc_type = 'X'.
lwa_bapimepoheaderx-purch_org = 'X'.
lwa_bapimepoheaderx-pur_group = 'X'.
lwa_bapimepoitem-po_item = '10'.
lwa_bapimepoitem-material = '000000000000020111'.
lwa_bapimepoitem-plant = 'CA01'.
lwa_bapimepoitem-vend_mat = '1000'.
lwa_bapimepoitem-quantity = '10'.
lwa_bapimepoitem-orderpr_un = 'M'.
lwa_bapimepoitem-no_more_gr = 'K'.
lwa_bapimepoitem-agreement = '4600000095'.
lwa_bapimepoitem-agmt_item = '10'.
lwa_bapimepoitem-pricedate = 'X'.
lwa_bapimepoitem-price_date = '20071030'.
lwa_bapimepoitem-no_rounding = 'X'.
APPEND lwa_bapimepoitem TO li_bapimepoitem.
lwa_bapimepoitemx-po_item = '10'.
lwa_bapimepoitemx-po_itemx = 'X'.
lwa_bapimepoitemx-po_itemx = 'X'.
lwa_bapimepoitemx-material = 'X'.
lwa_bapimepoitemx-plant = 'X'.
lwa_bapimepoitemx-quantity = 'X'.
lwa_bapimepoitemx-po_unit = 'X'.
lwa_bapimepoitemx-orderpr_un = 'X'.
lwa_bapimepoitemx-acctasscat = 'X'.
lwa_bapimepoitemx-agreement = 'X'.
lwa_bapimepoitemx-agmt_item = 'X'.
lwa_bapimepoitemx-pricedate = 'X'.
lwa_bapimepoitemx-price_date = 'X'.
lwa_bapimepoitemx-preq_no = 'X'.
lwa_bapimepoitemx-preq_item = 'X'.
lwa_bapimepoitemx-no_rounding = 'X'.
APPEND lwa_bapimepoitemx TO li_bapimepoitemx.
DATA: lo_msg_handler TYPE REF TO cl_message_handler_mm.
CALL METHOD cl_message_handler_mm=>get_handler
    IMPORTING
      ex_handler = lo_msg_handler.
lo_msg_handler->remove_all( ).
lo_msg_handler->cleanup( ).
CALL FUNCTION 'BAPI_PO_CREATE1' "in background task
       EXPORTING
         poheader   = lwa_bapimepoheader
         poheaderx = lwa_bapimepoheaderx
         testrun    = 'X'
       NO_MESSAGING = c_x
       NO_MESSAGE_REQ = c_x
         no_authority = 'X'
       IMPORTING
         expheader = lwa_bapimepoheader
       TABLES
         return     = li_return
         poitem     = li_bapimepoitem
         poitemx    = li_bapimepoitemx
         conditions = li_conditions.
ENDIF.
Edited by: bhavani prasad kotharu on Aug 6, 2009 3:38 PM

Printing Multiple Copies of Same Image on Multiple Pages

I have Photoshop Elements 11 on a Windows 8 platform. I can NOT get it to print multiple copies of the same file on multiple pages. I need one file printed on one page multiple times. I have tried the CTRL-ALT-SHIFT and nothing changes. It still just prints one and is done.
I use this for label printing, so I need it to print more than one copy at a time. It also is not saving the settings, so everytime I hit print, I have to readjust the print requirements. This just is not going to work when you need to print a few hundred copies at a time.

You can create your own picture package, if none of the options in the PSE print window>Type of Print work for you. Just make a blank file, copy/paste your image and alt drag it to make multiple copies. You can use the move tool to position things as you want them.
Generally speaking, though, for something like label printing, it's simplest to use PSE to create the image, then use your word processing/desktop publishing program to print the actual labels.

How to use rule and send the same email to multiple recipents

Hi,
My requirement is to send the workitem to the multiple recipents. one of my reiend suggest me to use the rule but i don't know how to use that .
can any one of you suggest me how to use rule in workflow.
Also i want to send the same email to multiple recipent .how can i do it by using the multiline variable...please advice me with example if possible..
Note :- Is it necessary to saparate the email id with comma or i will add all the email next one another..
Please suggest.
Thanks in advance ,
Anand

Hi Anand,
I would suggest you first follow the guidelines of the forum and a little searching. One of your questions has been asked just a few threads below.
Regards,
Martin

Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc)?

Would like to use 4nr iPads as an autocue system. Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc) and the others operating as slaves? Can this be done without the use of 3G or a remote Wifi hub? I would appreciate your input.................

Open the document in Acrobat Reader and use the menu Window > New Window.

Can i use the same advertisement to multiple collections?

Can i use the same advertisement to multiple collections?
Advertisment A1 currently linked to collection C1.
Can i use the same advertisement A1 to a collection C2? Because my collection C1 is query based and the C2 would be a static one.
If i use the same A1 advert, will it affect the earlier linked C1 collection i any ways?
System Security analyst at CapG

Well, in 2007 you actually kind of can. You can used linked collections to make C2 a linked sub-collection under C1 and ensure that the advert applies to sub-collections.
Jason | http://blog.configmgrftw.com | @jasonsandys

How do I apply same adjustments to multiple photos at the same time?

How do I apply same adjustments to multiple photos at the same time?

You can't but you can copy the adjustments made on one photo and apply/paste it onto another by:
1 - Control (right)-clicking one the edited photo in the Edit mode and selecting Copy Adjustsments
2 - Control-clicking on the next photo and selecting Paste Adjustments.
OT

TS2755 keep receiving the same text message multiple times, at the same time of the night. How can I stop this?Thabnks

Hi
I keep on receiving the same text message multiple times and at around the same time each night. Any idea how I can stop this happening? The text messages are originating from to separate Saudi Arabian mobile numbers. Both these people are listed in my contacts so do you think if I delete their names it might stop the texts coming htrough each night?
Cheers

Deleting the people from your contacts will not stop the messages. Have you tried talking to the people and finding out if they're sending you messages? You could try contacting your carrier and finding out what blocking services they offer. However, theat would block all messages from those people.

Re: Running the same (Forte) application multiple times -for different

Hi
We had the same problem - how to deploy a number of identical applications, using each their own db.
(for training).
The solution we used is to wrap the entire application into different applications by using a very small
module called KURSUS01, KURSUS02 etc, that did nothing but call the start procedure of the main app.
Then in the dbsession connect, we made a call appname to get the application name, and appended the
first 8 chars to the dbname. Thus our dbnames now points to logicals name: rdbdataKURSUS01, rdbdataKURSUS02 etc.
All this allows us to deploy the identical apps in the same env, or change one version, and run both the old
and new program on the same pc and server at the same time (eg. KURSUS01 and KURSUS02).
I also think this is a kludge - but it works nicely!
Jens Chr
KAD/Denmark
-----Original Message-----
From: Haben, Dirk <[email protected]>
To: 'Soapbox Forte Users' <[email protected]>
Date: 15. januar 1999 09:41
Subject: Running the same (Forte) application multiple times - for different business clients.
Hi All
We have a number of different business clients all willing to use our
application.
The (forte) application is to run on our machines etc for these (business)
clients.
All (business) clients will have their data kept in separate Oracle DBs
(instance).
The problem now is that the entire (forte) application is written using
DBSessions.
Now, depending on what business client needs to be serviced (so to speak) we
need to attach to the right DB - or use the "right" SO.
The two options we can think of are:
Option1:
Programatic change to somehow "know" what (business) client (DB) I'm talking
about and then use the right DB.
Pro:
Only one forte environment to maintain
Can run multiple (business) clients on same PC at the same time
Con:
Requires many program changes
bending O-O rules(?)
can't dynamically name SOs so can it be done at all? (ResourceMGRs maybe?)
Option2:
Use separate environments! One for each business client.
Pro:
More defined separation of app and data,
SLA-easy
Con:
Maintain "n" number of environments
Can only run the application for one environment (business client) at a time
on one PC - Big Negative here!
Not knowing any feasible solution to option 1 (without much code changes and
developer moaning) I would go for option two; as I have already worked on
multi-environment setups on VMS back at the Hydro (hi guys).
I would appreciate any comments from anyone who has solved this problem.
How, Why Pro Con etc.
TIA,
Dirk Haben
Perth, WA
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi
We had the same problem - how to deploy a number of identical applications, using each their own db.
(for training).
The solution we used is to wrap the entire application into different applications by using a very small
module called KURSUS01, KURSUS02 etc, that did nothing but call the start procedure of the main app.
Then in the dbsession connect, we made a call appname to get the application name, and appended the
first 8 chars to the dbname. Thus our dbnames now points to logicals name: rdbdataKURSUS01, rdbdataKURSUS02 etc.
All this allows us to deploy the identical apps in the same env, or change one version, and run both the old
and new program on the same pc and server at the same time (eg. KURSUS01 and KURSUS02).
I also think this is a kludge - but it works nicely!
Jens Chr
KAD/Denmark
-----Original Message-----
From: Haben, Dirk <[email protected]>
To: 'Soapbox Forte Users' <[email protected]>
Date: 15. januar 1999 09:41
Subject: Running the same (Forte) application multiple times - for different business clients.
Hi All
We have a number of different business clients all willing to use our
application.
The (forte) application is to run on our machines etc for these (business)
clients.
All (business) clients will have their data kept in separate Oracle DBs
(instance).
The problem now is that the entire (forte) application is written using
DBSessions.
Now, depending on what business client needs to be serviced (so to speak) we
need to attach to the right DB - or use the "right" SO.
The two options we can think of are:
Option1:
Programatic change to somehow "know" what (business) client (DB) I'm talking
about and then use the right DB.
Pro:
Only one forte environment to maintain
Can run multiple (business) clients on same PC at the same time
Con:
Requires many program changes
bending O-O rules(?)
can't dynamically name SOs so can it be done at all? (ResourceMGRs maybe?)
Option2:
Use separate environments! One for each business client.
Pro:
More defined separation of app and data,
SLA-easy
Con:
Maintain "n" number of environments
Can only run the application for one environment (business client) at a time
on one PC - Big Negative here!
Not knowing any feasible solution to option 1 (without much code changes and
developer moaning) I would go for option two; as I have already worked on
multi-environment setups on VMS back at the Hydro (hi guys).
I would appreciate any comments from anyone who has solved this problem.
How, Why Pro Con etc.
TIA,
Dirk Haben
Perth, WA
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Can I have the same printer installed multiple times under different names?

On WIndows I have the same printer installed multiple times
All using the same driver
I have a Canon printer that has a rear tray and a bottom tray
So, I will have one printer that prints to the rear and the other to the bottom
Other printers (the same one) will be set so that they print in high quality and in duplex for example
I'll name the printers 1.Canon 2.Canon 3.Canon etc
So, when I go to print, I just hit a number on the keyboard and the printer I want is selected
Can I do the same on my laptop?
Thanks
Omar

Back Up - that's in case things go wrong.
In the case you cite:
You have
Mother
Mother Maiden Name
as Faces, right?
In the Corkboard view click on Mother Maiden Name and delete the 'Maiden Name'.
It will disappear and all the photos will be in the Mother face.
Note that 'Mother' and 'Mother ' (that is, with a trailing space) are not the same.
You can also just edit the name 'Mother Maiden Name' to 'Mother'
As for photos staying in manual sort, I can only say that mine do. But as I've no idea what troubleshooting steps you've used.
Regards
TD

Tracert Same IP in multiple hops

Similar Messages

Maybe you are looking for