Tracing BAPI_INQUIRY_CREATEFROMDATA2?

We're trying to create Inquiries with configurable materials using BAPI_INQUIRY_CREATEFROMDATA2. We're passing the structures inquiry_cfgs_value, inquiry_cfgs_ref, inquiry_cfgs_part_of, inquiry_cfgs_ref and inquiry_items_in and are able to configure simple scenarios. However, when we try to create more complicated Inquires we get the very generic "Internal error: 10, 000010, NOT_ALL_INPUT" error message and the document is not created. I think we're passing bad configuration data however it is difficult to troubleshoot. Is there a way to trace this where we could get more meaningful error info?
Much Thanks,
Greg

You have to get the message id and the number from the RETURN parameter of the BAPI. You can then do a search for this in the BAPI code. Sometimes it may be coming from some other function modules called from within the BAPI. So it will take some digging. You can also try SE91, give the message ID and number and then look at it's where-used list.
Once identify where the error is issued from, you can either put a breakpoint there or you can deduct the error from the code before that.

Similar Messages

How can I display step info in User Interface with Tracing Disabled?

I'm trying to modify the CVI Operator Interface application to update the execute panel with some step information during the execution of the program. i.e. I want to display the measurement, high & low limits during the run WHEN TRACING IS DISABLED. (Doing this, when tracing is enabled is easy, all you do is access the step record that's been constructed (I can cope with that!))
I've successfully implemented a User defined execution event to signal the User Interface application when the current step is a result (using TS_UIMsg_UserMessageBase etc. I'm posting a UI Message in the Process Model under the ProcessModelPostStep so that I will only display if its a result step.) I've added a user defined
entry in the execute.c module execution event switch statement which will call a function in the exedisp.c module to update the display. However, I don't have a context to the step that I can use. (I can't use e.g. the exeRec record since this is only completed with the context if tracing is enabled.) I've got a handle to the correct panel to write the information to, but how do I get the context to the current step when tracing is disabled?
Regards,
Brian

Hi,
no problem - btw, if you wanted to acheive this in TS 1.x, you could always write to a local variable with the ActiveX reference for the step concerned, and then use the msg reference that you have in the OI within the UI Message handler, to dig through to the Execution ->Sequence File->Sequence->Locals, or Execution->Thread->SequenceContext (and you can get almost anywhere from that).
Hope that helps
S.
// it takes almost no time to rate an answer

Effects Don't work with Ray-Traced 3D?

Hello,
I'm working on a 3D logo for a company, and I'm trying to snaz what I have done with some effects, but the effects don't work. For example, I tried adding the CC Light Wipe Effect, but it will only show up when I switch back to the classic 3D renderer. Google searches aren't exaclty effective when I my serach quiere has "Effects" and After Effects" in it, so I'm forced to come here looking for the answer.
Are effects supported in this new renderer? If so, how do I get them to work?
Thanks

Pre-composing and then switching off Ray-traced rendering in the main comp gives you the ability to apply effects to the pre-comp. This may or may not work for your situation.
Another option is to pre-render your Ray-traced work and then apply effects to the footage. There's almost always something you can do if you think about it for a while.
Still another option is to put a 2D adjustment layer above your 3D Ray-traced layer and apply the effect there.

Using the New Mac Pro (can) - AE will not let me use Race Traced 3-D

Using the New Mac Pro (can) - AE will not let me use Race Traced 3-D
Hi, I'm using the new Mac Pro
2.7 GHz 12-core Intel Xeon E5
64 GB 1867 MHz DDR3
AMD FirePro D700 6144 MB
OSX 10.9.2
I'm using After Effects 12.2.1.5
When I attempt to invoke the race trace 3D renderer in a comp, I get this error
"After Effects Error: Ray-traced 3D: Out of paged mapped memory for ray tracer. Your project may exceed GPU limits. Try closing other applications. Try updating the CUDA driver. (5070::2)"
My preferences are set to use the CPU for Raytraced 3D since I do not have an Nvidia card.
So, obviously there is an issue here in that it thinks I have an Nvidia card.
I know (or assume I know) the cause for this is that when I set up this machine, I used Apple's migration assistant to move most of my data over from the previous gen Mac Pro which DID have a CUDA card.
So my question is, what files can I delete/reset to cause After Effects to no longer look for CUDA files that do not exist on this machine?
I do not have the CUDA control panel in System Prefs, so THAT did not carry over.
Any ideas would be appreciated, thanks!

> I know (or assume I know) the cause for this is that when I set up this machine, I used Apple's migration assistant to move most of my data over from the previous gen Mac Pro which DID have a CUDA card.
Ugh. That causes so many problems.
The first thing to try is deleting the CUDA frameworks from your Mac: Look in /Library/Frameworks for the CUDA.Framework and get rid of it.

Hey, How do I populate my replace colors color library in illustrator? I tried to replace color on a traced/ vectorized image and when I selected and went to the color library CC said I need to use a valid username. I was already logged into my adobe acco

Hey, How do I populate my replace colors color library in illustrator? I tried to replace color on a traced/ vectorized image and when I selected and went to the color library CC said I need to use a valid username. I was already logged into my adobe account.

Can you please show a screenshot of what exactly you want to replace where?

In the tracing drop down menu, how come the custom is greyed out and can't be selected? It looks like its disabled!!

in the tracing drop down menu, how come the custom is greyed out and can't be selected? It looks like its disabled!!

cc2014,
Have you selected an image?
Unless a good explanation appears, you may start onthe list below.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

ORA-01033 Error cannot be traced in the alert log or v$views

Hello There,
I'm hoping you can shed some light on what seems a rather odd occurrence on our Production Oracle Instance.
Before i elaborate on the nature of the problem, I must confess that i am not an Oracle DBA and have been compelled to post this query since i have no joy from the in house DBA community on the origins of this error.
We've had an ORA-01033 error being issued by our ETL installation (deployed on a Linux machine) a couple of days ago whence trying to extract some data from the Oracle instance (during overnight DataWarehouse loads) which has consequently aborted the loads necessitating a cleanup.
This event has already occurred twice before, the first time being a month ago when the event was captured in the v$instance (using the Startup time column where the timestamp corroborates to the first time we experienced this issue and also ackowledged by the DBA team) and also in the V$Dataguard_status.
Since then, This error has been generated twice although there seems to be no evidence of this in either the Oracle alert log(as confirmed by DBA team) or in any of the v$views (as pointed out by Tom in an earlier post) such as DBA_LOGSTDBY_HISTORY, v$logstdby_state, $logstdby_stats, dba_logstdby_log, dba_logstdby_events,v$dataguard_status, v$dataguard_stats, v$dataguard_config,v$database,v$database_incarnation, v$managed_standby, v$standby_log, v$instance. I searched these views since i suspected a latency issue during a failover which could be the reason for the
ORA-01033 but found nothing.
The DBA team have pretty much disowned this issue since they claim to not have any actual evidence of this from the logs and this is the crux of the matter here.
The Problem i have as the downstream "recepient" of this error is to prove to the DBA team that this is indeed a genuine issue with the Oracle instance affecting it's availability and concomittantly affecting the DW loads.
FYI, The Oracle instance is in Failover mode, so it's swiftly back online after bombing out for a few seconds.
Also, I don't have access to the Alert log as it's a Production environment and employs restricted access policy to the server.
Having said that, Is there anything else besides the obvious ORA errors that should be looked for in the Alert log?
Where else can ORA-01033 errors be traced/traced in the Dictionary besides the Alert Log?
Thoughts??
Regards

Thank You John for that query, but i'm on V10.2 and this view is relevant for 11g and beyond i believe.
Perhaps there is an equivalent for V10g?
I am also a bit bemused by the comment earlier about no trace being left behind if the DBA's performed a manual restart, surely it doesn't matter how the DB is restarted, the event is captured in the dictionary?
In the meantime, I've got a copy of the Alert log and have found redo log issues (DBWR/LGWR) very close to the time (a min after ORA-01033) of the shutdown event.
ALTER SYSTEM ARCHIVE LOG
Thread 1 cannot allocate new log, sequence 117732
Checkpoint not complete
I've looked into this a fair bit and this error apparently causes Oracle to suspend all processing on the database until the log switch is made.
Is this the causal link for my issue?
Does " suspend all processing on the database " actually translate into an actual ORA-01033 error (or some form of) when the ETL application is trying to connect to and extract data from the Oracle database at that time?
Edited by: shareeman on 16-Oct-2012 03:50

Tracing references in the Flex SDK

I work with Flash Builder on a daily basis and I find great value in "Find reference (Ctrl+Shift+G)" and "Open declaration (F3)". In Flex SDK 4.6.0 I was able to find references and open declarations not only in my own projects but also in the SDK files which I find valuable for various reasons. Using Apache Flex SDK 4.11.0 Flash Builder seems to have lost this ability: Open declaration works half the time and most often navigates to the wrong place in the file, and Find references does not work with SDK files at all. I have tried with both Flash Builder 4.6 and 4.7.
By tracing references in the SDK I mean working with the files accompanying the compiled Flex SDK (ie. C:\sdk_location\framework\projects\project\src\).
Any ideas how I can make Flash Builder help me browsing the SDK again?
Details:
My project compiles with both
Apache Flex SDK 4.11.0
Flex SDK 4.6.0
I can use Find references in my own project.
I can use Find references in Flex SDK 4.6.0.
I can't use Find references in Apache Flex SDK 4.11.0.

Change to the Flex bin directory and use mxmlc like this:
mxmlc path/to/my/App.mxml
This should create a SWF file that you can then run. If you
plan on posting the app somewhere, you'll probably want to create
an HTML wrapper. You can use the wrappers in the html-templates
directory.
For more info on using mxmlc, see the online help (type
"mxmlc -help list") or look in the Compilers chapter of the
Building and Deploying book. For more on using the wrappers, look
in the wrappers chapter of the same book.
hth,
matt horn
flex docs

Tracing in Oracle 8i

how to enable tracing in oracle 8i.
and how to view the trace file
Thank you
Bharathi

hi,
>>, it is showing error ORA-12353 Timed out.
SQL> !oerr ora 12353
12353, 00000, "secondary stored object cannot reference remote object"
// *Cause: You tried to either select from a remote view or execute a remote
// procedure which references an object on another database. Since
// the remote view or procedure is on a secondary database, an
// additional reference to another database cannot be done.
// *Action: Choose a different object to reference or change the remote
// view or procedure so that it does not reference another database.
but timeout only occurs in 12535 error
SQL> !oerr ora 12535
12535, 00000, "TNS:operation timed out"
// *Cause: The requested operation could not be completed within the time out
// period.
// *Action: Look at the documentation on the secondary errors for possible
// remedy. See SQLNET.LOG to find secondary error if not provided explicitly.
// Turn on tracing to gather more information.

Does moving my service to a new device prevent me from tracing my stolen iPhone?

My iPhone was recently stolen. It was powered down at the time. I am using the "Find iPhone" app and have the phone set to "Lost Mode Pending". If I move my phone service to a replacement iPhone would that prevent the Find my iPhone app from locating the stolen phone even if someone powers it up?

The tracing is based on the stolen iPhone having Find My Phone turned on, linked to iCloud, and the iPhone must be powered up and connected to the internet. Anyone of those is missing and it cannot be found.
The tracing is not dependent on the phone service provider unless you cannot access your iCloud account.

Tracing Captivate 4 variables in Flash CS4 using AS3

Hello. I've googled this 9 ways to Sunday and can't find an answer. I'm hoping one of you can help.
I have a very simple Captivate 4 quiz with one question. I embed the Captivate SWF file in a Flash file, which plays fine. However I am struggling with tracing one of the Captivate variables in the Flash file using AS3.
All I want is for Flash to read the Captivate variables so I can continue developing my quiz in Flash (building additional functionality Captivate does not provide).
The variable I'm attempting to trace is cpInfoAuthor.
I've attempted:
trace(root.cpInfoAuthor);
trace(root.movie.cpInfoAuthor);
var cpAuthor = MovieClip(root).cpInfoAuthor;
All of the above examples error out: TypeError: Error #1009: Cannot access a property or method of a null object reference.
Captivate preferences are set to publish in AS3.
Anyone with an explanation?
Be splendid, Jodie.

Hi Jodie,
I'm not exactly 100% proficient in AS3 but to me it looks like your statements are wrong.
Since you are loading your Captivate SWF into a Flash SWF then (root) actually refers to your Flash SWF. I guess that you are loading your Captivate SWF into a movieclip on your Flash stage and that movieclip has an instance name,
You would therefore need to grab the variables like var cpAuthor = yourLoaderMovieClip.cpInfoAuthor;
See if that doesn't do the trick for you.
/Michael
Visit my Captivate blog with tips & tricks, tutorials and Widgets.

Javascript: copy an object to a new layer and tracing it

Hello everybody:
I'm using Illustrator CS5 on Mac. I need to copy an objecto to a new layer and tracing it. I'm trying to execute the script above. There is no problem with the copy to a new layer, but Illustrator returns the error "newItem.trace is not a function". Sorry because this is my first script and i'm lost.
Thank you in advance.
    var myDoc = app.activeDocument;
    var sel = myDoc.selection[0];
if ( myDoc.selection.length > 0 ) {
    var newLayer = myDoc.layers.add();
    var newItem = sel.duplicate( newLayer, ElementPlacement.PLACEATEND );
    var myTrace = newitem.trace();
    var myOpts = myTrace.tracing.tracingOptions;
    myOpts.tracingModeType = 'TRACINGMODEBLACKANDWHITE';
    app.redraw();
    myTrace.tracing.expandTracing();

Hi Jose, if your selection is other than PlacedItems or RasterItems, you have to rasterize it first.

Deactivating Logging and Tracing

Deactivating logging and tracing for single Interface in XI Box
Could some one guide me on this.
We have an Interface in which the log file generated due to XSLT Mapping+ Value Mapping is of huge size. So we want to deactivate the logging and tracing of the same.
Regards
Abhishek Mahajan

If you want to change the Trace for value mappings then there is an option for it in Visual Admin....but again it will disable the Trace for all value mappings.....
http://help.sap.com/saphelp_nw04/helpdata/en/42/52f7415e639c39e10000000a155106/content.htm
From the link:
In addition, value mappings can be traced (log configuration XIRUN.com.sap.aii.ibrun.server.valueMapping)
so just check it out if you can change the above field to disable Trace....
Regards,
Abhishek.

SOAP adapter: port, logging/tracing, http/https

Hi,
several questions concerning SOAP adapter:
SAP XI 3.0 SP19 used.
Scenario 1:
SOAP request adressing J2EE port
http://host:8000/XISOAPAdapter/MessageServlet?channel=Partner:Service:SOAPSenderChannel
Scenario 2:
SOAP request adressing ABAP port
http://host:50000/XISOAPAdapter/MessageServlet?channel=Partner:Service:SOAPSenderChannel
Question 1:
What happens with a SOAP request adressed to the ABAP port?
Obviously it is forwarded to the J2EE port but where is this forwarding function documented
and is it allowed in every case to send SOAP messages to ABAP port?
Question 2:
What logging and tracing functionalities do i have in both scenarios before the message enters (before RWB)?
E.g. where can i see unsuccessful requests (e.g. if there is mistyping in SenderChannel).
Then it not visible in Runtime Workbench but whereelse?
If the ABAP port is adressed i see something in SMICM trace file, but very cryptic and not conclusive.
Do you know further trace/log files for both scenarios (Visual Admin?) ?
Question 3:
What is the difference if https is used concerning logs and traces?
Do i have more or less possibilities?
Thank you very much in advance for comments.
Michael

Hi
The URL sent to the ABAP port and the J2EE port are different.
The URL to the ABAP port is documented in this blog by Stefan,
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
http://<server>:<ABAP-port>/sap/xi/engine?type=entry&version=3.0&Sender.Service=<YourService>&Interface=<YourNamespace>%5E<YourInterface>
Answering question 1 --> As the URL are different, the Request in case of the ABAP stack hits the Integration Engine directly - into the pipeline of XI and bypassed the Adapter Engine competely.
As stefan's blog states - you cannot post multipart SOAP request to the IE directly.
Question 2 - If the URL is incorrect, if the request hits XI then you will have the log in XI ( in MONI in case of ABAP port ) and in RWB -Message Monitroing ( in case of J2EE port)
Regards
Bhavesh

Get rid of white box around image after image tracing to create vectors

Hi there, please help!!!
I am trying to convert png and psd images (icons) into vectors but i would like to safe them as .eps file and keep them on a transperent background. How do i do that? After the image tracing a white box appears around my images and i dont know how to get rid of it.
I would be so greatful if someone could help me out here as i tried suggestion from the internet and nothing worked so far.
Thank you so much,
Franzi

Franziska,
Tick Ignore White in the Image Trace options.

Tracing BAPI_INQUIRY_CREATEFROMDATA2?

Similar Messages

Maybe you are looking for