Tracing ip or sys name for some t code
hi..
actually i just got a problem..some one who knows about my login name and password has made some transaction from my Id yesterday...so can i know at what time and from which IP that transaction take place..
thanx,
vaneet thakur
Hi,
Chk this TCodes SM20 and SM04,SM19.
Regards,
lakshman
Similar Messages
-
In my photo stream my sister in law shows up as my brothers name even thought her contact card says just Kim and no Smith ? Even though I dont have John Smith anywhere in my contacts, I may have just John but no smith. So everytime she likes a photo it says his name for some reason?? Her name is ]corrrect on other peoples phone that are members of the same photo stream. I have looked into both contact cards and cannot find anything anywhere that would make her name show up as John Smith when I send the invitr to her email or phone muber. I even went as far as changing her name to see and deleting her from the group and readding and still no luck.BTW I am using an iphone 5 with the latest update.
Hello,
It is my understanding that the name displayed here will be that which is (in Contacts) associated with the email address for the Apple ID registered with the iCloud account of the person on the stream.
In other words, check to see if the contact entry for your brother in your iPhone has an email address. If this email address in his contact entry is also associated with the Apple ID that your sister-in-law is using for iCloud (which is responsible for Photo Streams), this could be the cause of the delemma. I believe this is a programmed feature and not a bug, but I'm not positive about the methods iCloud uses to display that name.
In order to troubleshoot this, delete that email address in your brother's Contact entry and add it to your sister-in-law's Contact entry. This could correct the issue. If that works, you could then add the email back to your brother's entry (so that it is in both of their entries) and see what happens. -
HT1766 I turned off my contacts on my email and it erased all my names for some reason
I turned off my contacts on my email and it erased all my names for some reason
Why did you turn them off? Turn them back on.
-
Auto closing of dispute cases--only for some company codes
Hi
We have activated dispute management for several company codes in our system. The auto closing of dispute cases also has been activated in status management. Cases are automatically closed by the system (through a batch job) when the last disputed object is cleared.
Now there is a requirement to deactivate auto closing only for some company codes. They want to close cases manually in these company codes.
Is this possible and if so how?
Regards
Raj.You cannot deselect at a company code level.
Can we go through you proposed process.
So you have a dispute for $100.
The customer pays it and the dispute closes.
Then the customer calls up and says they have an issue with the invoice they paid previously.
I have seen this happen before but there was a little twist
1 - The customer raised a debit note against the client for the issue that they had. The original invoice is cleared but a debit note is created and then disputed and processed. So you can close the original dispute and create a new dispute against the debit note
2 - The customer paid the wrong invoice. The dispute was closed. However to rectify the miss allocation the clearing document will be reversed meaning the dispute is "re-opened" and can be processed.
I am unaware of any other requirement for a customer to "re-dispute" a paid item in SAP. -
Hi experts
i need tax percentage , i used this function module
MM_ARRANG_GET_TAX_PERCENTAGE
import parameter
I_MWSKZ = c1.
I_BUKRS = 1000
I_WAERS = inr
iam geting this message for some tax code like c1 ,t2, t3
message : Tax code C1 country IN does not exist in procedure ZAXINN
other taxcodes v0,v2 s2,s3 are got percentage, it's proper result.
please give me sugession.HI Friend,
Use the Functional module FI_TAX_GET_CONDITION, this will be used in case ur using the in acsess sequence tax classification (ie A003 table)
pass the inputs like
I_BUKRS >> company code
I_LAND1>> country
I_KALSM>> tax procedure
I_MWSKZ>> tax code
I_TXJCD>> tax juriduction code
I_KSCHL>> condition type
I_KTOSL>> transaction
I_TDATE>> date
the functional module your using will not give the proper results
Regards
Pramod -
Logical Sys Name for Business system in SLD for Third Party
Hi !!
I have little doubt what will be the logical system name for creating Business systems in SLD for third party?
thanks
GowriHi Gowri,
sorry, i dont agree with the other answers. The logical system name is required for ALE partner finding. If you dont want to communicate with IDocs you dont need it. If you want to send messages from third party system to R/3 via IDoc adapter, then you should (can) give a name. It can be configured in IB directory as well (adapter specific identifiers). Choose any name, this name will be used for the partner agreement in R/3.
Regards,
Udo -
Need Table name for some fields..
Dear Friends
Please help me to find Table names for for the following fields :
1. Document Currency
2. Cleared / Open Item Symbol
3. Transaction
4. Fixed
5. Payment Date
6. Payment Order
7. Payment Sent
thanx in advance..Hi,
Press F1 on the screen where you have seen the fileds.You will get techncail information.click on that button.It will show you the table and field names.
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M -
How to specify file names for the generated code in wscompile
Hi,
We want to follow a certain file naming conventions for the artifacts generated by wscompile.
How is it possible to set the name for the service interface file, service implementation file etc....
This is possible in AXIS ant task Wsdl2Java. How do we do it for wscompile.
thanxThanks Chris and c. Under Description I'm presented with three Names for the profile: ASCII, UniCode and Mac Script. ASCII and Mac Script are the same name for the profile, with nothing being in the UniCode Name box. Which do I change -- both?
Am I going to screw things up in Photoshop if I change these names to something I can comprehend? Looks like I may just have to make a sticky-note list of the cryptic profile names with my own descriptive name as a reference. Thanks. -
Table name for field Task code text
Hi guys,
I need to work on a report.could you please help me to find the table name for the filed Task code text in the tab customer corrective actions in QM01/02/03.I needto fetch the text for the corresponding Task code.Hi,
I think you are searching for -
QPCD-KURZTEXT or QPCD-LTEXTV
For text field fetch - go to table - QPCT
If not give me more clear idea !!!!
Edited by: ashleshabhagatshelke on Jun 9, 2010 8:16 AM -
Can not find role for some transection code
Dear Gurus,
EWA alert with security issue.
Many user grant access some t-code etc. SE16,SM59,SE17,SE16 and I found users at SUIM t-code can access.
But , when I find role for t-code that I should remove.
Not found,
Please advise.
Thank .Hi,
can you please try this
SUIM > Roles by complex criteria or RSUSR070 to find out this.
Go to the Selection by Authorization Value.
In Object 1 put S_TCODE and hit enter.
And put SU01 in Transaction code and hit execute (clock with check) button.
I use authorization object, as you can use this to test any object.
You can also get this information directly from table, if you have access to SE16 or SE16N. Execute SE16N
Table AGR_1251
Object S_TCODE
VALUE (low) SU01
Regards,
Srinu -
Stop Fax functionality for some buyer codes.
Hello Everyone,
We need to stop faxing for certain buyer codes in SRM. Because some buyers are retired and we do not want to fax the POs under their buyer codes.
Because we run the L7A and L6G programe and it sends all the purchase orders to faxing. We want to stop the faxing of these POs while these programs are running and once these programs are complete we want to turn on the Fax functionality.
Can somebody help me in this?
Thanks,
Khushbu.in MN05 you can maintain for which messagetype of the and vendor you want to use mail instead of fax
When you have a messagetype in de PO like ZXXX for sending the fax then you can also set it to email in MN05 for specific vendors. (in customising mail must also be active for ZXXX ofcourse)
kind regards
arthur
Edited by: A. de Smidt on Jan 4, 2011 3:50 PM -
N97 v.21.0.045 in UK ((for some product codes))
I found today that there's update v.21.0.45 for product code :
0591861 RM-505 BLACK
so i checked the Internet and found that it's available too for product code:
0591721 RM-505 WHITE
so now i have both my N97 (( MENA version and CV UK version )) with v.21 .... yuppy!!
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2Be aware that those are not the codes for the standard (most popular) UK models. The update for these two codes has been available for over a week.
They are for the "comes with music" version of the N97 that very few people have, in fact i've not seen it on sale anywhere on the high street yet.
Most people in the UK (with unbranded phones) either have the 0585162 (black UK CV), the 0587240 (white UK CV) or the 0587691 (CPW UK GB Black) codes.
What is more annoying is that this firmware is no different from the standard UK CV firmware.
Any UK users that are unhappy about this please post on this thread:
/t5/Software-Updates/Firmware-Updates-in-the-UK-Campaign-for-Equality/td-p/530013 -
IMessage displays numbers instead of names for some contacts
Hello All,
I have googled this problem and searched these forums in attempt to fix this issue but to no avail just yet. To date I have tried:
Switching off iMessage, performing a soft reboot, switching iMessage back on
Same as above, but doing a hard reset instead
Same as above with both of my iTunes email addresses (I had an old one I used before I upgraded to the iPhone 4)
Adding +1 to my contact names
Choose "add to existing contact" from iMessage and replacing the old number
Turning off icloud, Removing all the contacts from my phone, and then turning iCloud back on
Restoring system settings
Nothing has worked and I get a mix of names or numbers in iMessage.
It is severely annoying (1st world problems, right?) as I'm tour and communicate with many promoters via text (600 contacts and growing...).
Does anyone have any other ideas?*on tour
-
LOV name for Tax Classificaiton Code
Hi All,
In R12 if we navigate to payable manager -> invoice lines we have tax classificaiton code, and it has an LOV can u tell me the LOv name.
Thanks and Regards
SrinivasHi,
Tax classification code is the Tax Rate which we are defined in E -Business Tax Manager Responsibility. We can also define the Tax Rate from payables also.
A Tax Rate is the rate specified for a tax status. A tax status can have one or several tax rates. In addition, special tax rates may apply to a specific tax jurisdiction.
Navigation:
Payables Manager --> Setup --> Tax --> E-Business Tax Home
Click on Tax configuration and then click on Tax Rates.
Regards,
Raju. -
Table name for Transports return code
Hi Floks,
I have 400 transports list and they have recently to traget system.
I need to know how many are ended with returncode 8.
Is there any table where i can know the return codes of the transports?
Regards
SriniGoto STMS -- click on Import Overview (truck symbol) -- double click on your system --- it displays all the transport requests -- select heading of the status column -- click on filter button on the tool bar -- select the required status -- execute.
Hope it satisfies your requirement.
Veerendra.
Maybe you are looking for
-
Product description- is not getting updated..
Hi APO Expert, I am getting error in description of product - it is not getting updated.. Material description is changed in R/3 same is not getting extracted in APO. However, other forecast data and transaction data of extracted successfully. Please
-
Downloading email on E71 crashs the message applic...
I am facing a problem since updating the firmware of E71 which is simply causing the message application to close (crash) after donwloading the emails. the crash cause the shortcut button of the email on the phone panel not to work and I have to open
-
I currently have an Airport Extreme Base Station connected to my DSL router by Ethernet. Because I have a long, sprawling home, I have 3 Airport Expresses configured to "Extend the Wireless Network" I've established. Because of my home environment--t
-
No Source Signal, intermitte​ntly when using Graphics Cars
I've just bought a new HP 23xi monitor and am very happy with it, aside from one thing. When I connect my Graphics Card to the monitor (with HDMI, DVI or VGA) 95% of the time I will be presented with the message 'No Source Signal'. After some unplugg
-
FLASH DRIVE ISSUE HELP !!
Why does my FLASH DRIVE inserted to mac then inserted to WINDOWS it turned to shortcut after that i can't open my file to my mac.