Tracing of BAPIs/RFCs

Hi,
I need to trace the BAPI/RFC calls for some transactions. I have tried to use ST01 and ST05 for tracing but I am not able to get detailed trace files having the function calls.
Can anyone suggest how to generate these trace files?
Thanks,
Kapil

hi,
Thanks for your response. Is there any other settings I need to do to log all the RFC/BAPI calls? I can see the trace file but all the details are not logged in it.
Thank you,
Kapil

Similar Messages

BAPI/RFC for Service Complaints Creation in CRM 5.0

Hi,
We are working on the Complaints and Returns module in CRM 5.0. We have found the Transaction Code for the same. (CRMD_BUS2000120).
Not able to find the BAPI/RFC for the same.Let us know if any. Appreciate your comments on the same.
Thanks,
Moorthy

Hi,
Thanks for the response
I am not talking about Service Order. I have requirement to create a Service Complaint. For that the transaction is CRMD_BUS2000120. Now I need to find the function modules/RFC available for this requirement.
Hope it clarifies .
Even I have found function module called -CRM_COMPLAINT_API_CREATE but not sure right one
Thanks,
Moorthy

Serialize BAPI/RFC executions to avoid locking issue

We have an XI interface that calls and executes a BAPI/RFC to create an invoice receipt against a purchase order in R/3.
While the BAPI/RFC is running, it locks the purchase order. If another XI call to the BAPI/RFC is initiated to create an invoice receipt against the same purchase order, the second BAPI/RFC call will fail in R/3 due to locking.
I have the following questions:
In XI, can we serialize the execution of the BAPI/RFC so the second call will start only after the execution of the first one is complete in R/3?

Hi,
no and yes
no: not in standard
yes: there are workarounds - you can wrap the
BAPI in a RFC in which you can control it
(I used this solution and it works)
Regards,
michal

Standard BAPI/RFC for Search Knowledge Article in Knowledge Management-Interaction Center

Hi All,
I am not from SAP CRM, but I am using CRM Web UI to maintain Knowledge articles. Now I want to know where in the backend this data is getting saved. Which table ?
Also as this is a standard process introduced in CRM 7.0 . I want to know, if standard bapi/ rfc is available for the same. If yes what is the name .
Regards,
Tejas Chouhan

Hi Tejas Chouhan,
In CRM Technically, Knowledge article is designed based on one order framework with business object category as BUS2000106 - CRM Knowledge Article.CRMD_ORDERADM_H table will give header details of KA (OBJECT_ID field would equal KA number).
Knowledge Articles in SAP CRM
Refer
1 CL_CRM_QKNOART_RUN_BTIL & SEARCH method to see code how it is written (standard search for knowledge article) consider all scenario. you can keep external debugger in this method and perform search from Web UI.
2. CL_CRM_KNOWLEDGE_ARTICLE_UTIL & SEARCH_REPORTING_FRAMEWORK method.
Hope this is helpful.
Regards,
Arjun

Standard BAPI/RFC for in-transit shipments

All experts, I am new to SAP functional area. I am looking for a standard BAPI/RFC that will get me all in-transit shipments. Is it available and if so what is the name of the BAPI ? Or a custom one needs to be written?
Thanks in advance for you help

can u give us the transaction for that
cheers
s.janagar

Difference among IDOCS,BAPI,RFC?

what is the difference among IDOCS,BAPI,RFC? and what is the real need to use them and again where exactly these are used in real time applications?

Hi,
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
IDOC type and IDOC. An Intermediate Document (IDOC) type represents the structure of the data associated with a message type (DEBMAS02 for message type DEBMAS Customer Master, and WMMBID02 for message type WMMBXY Goods Movements), while an IDOC is an object containing the data of a particular message type. IDOCs are data containers with intelligence built in. Each IDOC contains one and only one business object. For example, an IDOC of type SHPMNT01, message type SHPMNT, will contain data only of one Shipment Document. Generally, the architecture of an IDOC is independent of the message type by virtue of ALEs ability to redefine it for any message type.
Regards,
Bhaskar

FI-FM : BAPI/RFC for Funds reservation Creation ?

Hi,
I was asked to web enable the creation of funds reservation (= web enable what transaction FMX1 does). I have searched for available BAPI's/RFC's for this but I didn't found one. Since I'm not familiar with FI and FI-FM I maybe didn't search well.
Do BAPI/RFC's exist for creating Funds Reservations ?
(My only other option is to create a BAPI myself which does a call transaction to FMX1).
Best Regards,
Igor Vernelen.

the problem was an oss note for no BL on GR for EF

Reg:BAPI RFC

How to create BAPI-RFC?wht is the purpose of bapi rfc?
plz send me urgently.........

Hi,
Programming a BAPI consists of some tasks like: Defining BAPI Data structures ( using SE11 )
Creating BAPI Function Modules (For each method)
Defining BAPI Methods in the BOR
Documentation of the BAPI
Generate ALE interface for asynchronous BAPIs
Generate and release
NOTE:
Here we will not be covering the two points Documentation of BAPI and Generating ALE Interface for asynchronous BAPIs.
NOTE: You can use the BAPI explorer (T-code BAPI) to get a step-by-step instruction / checklist in how to create a BAPI. In the BAPI explorer select the Project tab.
EXAMPLE HOW TO CREATE A BAPI
In the example we will create a BAPI that reads some information about the line items for a Sales Invoice from table VBRP based on the Invoice No. that is supplied to the import parameter of the BAPI Function Module.
BAPI Name ZGetInvoiceItems
Function group ZBAPIVIN
Function module: ZBAPI_GET_BILL_ITEMS
FM Import parameters : IV_BILLNO TYPE ZBAPI_BILL_ITEMS-VBELN
FM Tables :IT_VBRP LIKE ZBAPI_BILL_ITEMS
FM Export parameters : RETURN LIKE BAPIRETURN
Defining BAPI Structures
This is the basic step followed while creating BAPIs. All the relevant structures that are required for BAPI have to be created using T-Code SE11. The structures can be created for Import/Tables parameters. Use Data type -> Structure
In our case we do not have multiple inputs but just one input i.e. Sales Invoice No. and so we have not made use of any structure for the purpose. But if required, structure can be used for import parameter also.
The following are the components of structure ZBAPI_BILL_ITEMS:
Field Name Description
VBELN Invoice Number
POSNR Invoice Item Number
MATNR Material Number
FKIMG Quantity
VRKME Sales Units (Quantity)
NETWR Amount
Point of Caution
It is required to define a structure for every parameter in the BAPI and use of same structures which are used in existing applications cannot be done because BAPI structures are frozen when BAPIs are released and then there are restrictions on changing them.
Screenshot of Structure ZBAPI_BILL_ITEMS
Creating BAPI Function Modules (For each method)
We must create new function group for each BAPI. If the BAPIs are related then the same can be grouped under the same FUNCTION GROUP to enable the sharing of global data amongst the related BAPIs
Screenshot of Attributes Tab in the FM ZBAPI_BILL_ITEMS
Screenshot of Import Parameters Tab in the FM ZBAPI_BILL_ITEMS
Screenshot of Export Parameters Tab in the FM ZBAPI_BILL_ITEMS
NOTE:
Since Remote Enabled module processing type is selected and the Import/Export parameters can only be BY VALUE for an RFC enabled function module, select the checkbox for Pass Value for each IMPORT/EXPORT parameter.
Screenshot of Tables Tab in the FM ZBAPI_BILL_ITEMS
Code in the Function Module ZBAPI_BILL_ITEMS &
related Includes in the Function Group
INCLUDE LZBAPISTATUSUXX
THIS FILE IS GENERATED BY THE FUNCTION LIBRARY. *
NEVER CHANGE IT MANUALLY, PLEASE! *
INCLUDE LZBAPIVINU01.
"ZBAPI_GET_BILL_ITEMS
INCLUDE LZBAPIVINTOP Global data
FUNCTION-POOL ZBAPIVIN. "MESSAGE-ID
TABLES: VBRK, VBRP.
DATA: T_VBRP LIKE ZBAPI_BILL_ITEMS OCCURS 0.
STRUCTURE FOR RETURN MESSAGES BY BAPI FUNCTION MODULE
DATA:
BEGIN OF MESSAGE,
MSGTY LIKE SY-MSGTY,
MSGID LIKE SY-MSGID,
MSGNO LIKE SY-MSGNO,
MSGV1 LIKE SY-MSGV1,
MSGV2 LIKE SY-MSGV2,
MSGV3 LIKE SY-MSGV3,
MSGV4 LIKE SY-MSGV4,
END OF MESSAGE.
INCLUDE LZBAPIVINU01 - Subroutines
***INCLUDE LZBAPIVINU01.
FUNCTION ZBAPI_GET_BILL_ITEMS.
""Local interface:
*" IMPORTING
*" VALUE(IV_BILLNO) TYPE VBELN
*" EXPORTING
*" VALUE(RETURN) TYPE BAPIRETURN
*" TABLES
*" IT_VBRP STRUCTURE ZBAPI_BILL_ITEMS
Check if the Invoice exists
select single *
from vbrk
where vbeln eq iv_billno.
if sy-subrc ne 0.
If not return the error message
clear message.
message-msgty = 'E'.
message-msgid = 'Z3'.
message-msgno = '001'.
message-msgv1 = iv_billno.
perform return_bapi_message using message
changing return.
exit.
endif.
If the Invoice exists, get all the required item lines information
in the table it_vbrp
refresh it_vbrp.
clear vbrp.
select vbeln posnr matnr fkimg vrkme netwr
into table it_vbrp
from vbrp
where vbeln eq iv_billno.
ENDFUNCTION.
FORM RETURN_BAPI_MESSAGE *
--> VALUE(IV_MESSAGE) *
--> XV_RETURN *
form return_bapi_message using value(iv_message) like message
changing xv_return like bapireturn.
check not message is initial.
call function 'BALW_BAPIRETURN_GET'
exporting
type = iv_message-msgty
cl = iv_message-msgid
number = iv_message-msgno
par1 = iv_message-msgv1
par2 = iv_message-msgv2
par3 = iv_message-msgv3
par4 = iv_message-msgv4
importing
bapireturn = xv_return
exceptions
others = 1.
endform.
Regards,
Vineela.

BAPI/RFC for WIP values

Hi all,
I would like to show production order WIP values in an external system dashboard.
Is any BAPI/RFC/IDoc available to fetch the data from SAP? If not, please let me know corresponding table to view the data in SAP?
Thanks
Guru

In view COVPB you should find WIP and variance information.

BAPI/RFC FOR MB52

PLS PROVIDE BAPI/RFC FOR MB52.
OR
PLS PROVIDE BAPI/RFC TO READ MARD-LABST.
PLS HELP I AM NEW TO SAP.
I tried
BAPI_MATERIAL_AVAILABILITY
but it wont provied al stock for some material it provided error
EAG024No checking group is maintained for product 000000002000181306, plant JGE1 in matl master.
my requiremts is
material/plant/sloc/batch/fr_stk kid of table
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Feb 14, 2011 5:23 PM

Hi Gautam,
Check the bapi BAPI_MATERIAL_STOCK_REQ_LIST. it contains various parameters like MATERIAL
PLANT,MRP_AREA,0PLAN_SCENARIO,SELECTION_RULE,DISPLAY_FILTER,PERIOD_INDICATOR,GET_ITEM_DETAILS
GET_IND_LINES,GET_TOTAL_LINES,IGNORE_BUFFER,MATERIAL_EVG
Read the documentation of this Bapi . If you wont get all parameters what you require better to go for a Zbapi. Please tell if require more help on this
Regards,
Madhu.

Finding FM/BAPI/RFC for Create Inbound Delivery(vl31n).

Hi all,
i need for a FM/BAPI/RFC for Create Inbound Delivery(vl31n) or ASN
where in import Parameter i have to pass -
*vendor no*
*PO no*
*External ID no*
*Delivery date*
*TransPlanngDate*
*BillOfLad*
*GR/GI Slip*
in Export i need ASN no and in tables we can use ITEM details.
Regards,
Sunil sahoo.

Hi,
Check the below link
[https://forums.sdn.sap.com/click.jspa?searchID=16938983&messageID=5780492]
Regards,
Surinder

IDOC / BAPI / RFC

Hi,
I want to know what is the differences between the IDOC/ BAPI/ RFC...????
How we will prefer to choose one of them??
What is asynchronous / synchronous IDOC..???
Can you giude me on these terms and provide me some useful data/information for the same..
Thanx,
Jay

Hi Jaywant,
Please check this link
What is the difference between ALE, IDOC and BAPI
http://www.sap-img.com/abap/ale-bapi.htm
Difference Between BAPI and RFC
http://www.sap-img.com/fu026.htm
http://help.sap.com/saphelp_nw04/helpdata/en/18/22b800773211d396b20004ac96334b/content.htm
Best regards,
raam

Remote enabled BAPI/RFC to create VACANCY in Recruitment

Is there any Remote enabled BAPI/RFC to create VACANCY in Recruitment?
I need to create VACANCY from external .Net program.
Thanks.

closing to post another question

What are idocs, BAPI, RFC?

Hi,
What are idocs, BAPI, RFC?
Regards,
anuj

Hii,
BAPIs and RFCs are the functions exposed by SAP, when it comes to the integration part, you have to know that particular BAPI or RFC. For example, if you want to get table data or want to query to the SAP table then you use RFC_READ_TABLE. Similarly if you want to know whether customer is existing, you need to know which RFC/BAPI has this info. May I know which tool are you using, are you talking about generating a proxy and playing around that.
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
BAPI
BAPI Programming guide: -
http://help.sap.com/saphelp_nw04/helpdata/en/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm
BAPI user guide: -
http://help.sap.com/saphelp_46c/helpdata/en/7e/5e115e4a1611d1894c0000e829fbbd/frameset.htm
BAPI STEP BY STEP PROCEDURE: -
http://www.sap-img.com/abap/bapi-step-by-step-guidance.htm
Example:-
http://www.erpgenie.com/abap/bapi/example.htm
PDF download: -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/200dd1cc-589e-2910-98a9-bb2c48b78dfa
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
Also refer to the following links..
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.planetsap.com/Bapi_main_page.htm
http://www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
BADI
Check these links on BADI
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
Check this link for advantage of BADIs over User exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Reward points if useful.
Regards,
Sushama

Secure BAPI/RFC call

Hi All,
Iu2019m wondering if I can set up a secure connection between MII and ECC when I'm working with BAPI/RFC calls. I heard that MII supports the SAP proprietary interface called Secure Network Communication (SNC), but I donu2019t know if it is already enabled or if I should to do some additional configurationu2026
Does anyone have any experience on this topic?
Regards,
Henry

Hi Henry,
I never setup a SNC with MII. I can't see any properties in the JCO. In the JRA exist some properties for SNC.
Take a look on this:
http://help.sap.com/saphelp_nw04/helpdata/en/96/a4804258544b76e10000000a155106/content.htm
Thats all what I know about SNC.
BR
Pedro

Tracing of BAPIs/RFCs

Similar Messages

Maybe you are looking for