Tracing of Revision levels in logistics

Hi, Memebers,
I have some questions about revision levels.
1. Can the revision level of a material be displyed in purchase order?
2. If yes, can craetor of PO select the revision level of the material to be purchased when multi revision levels exist?
3. Can the revision level of a material be seen / traced in inventory management? e.g. can material be stored seperately according to its revision level?
Pls kindly tell me yes or no, and how. Thanks.
Best regards,
Yu

1. Can the revision level of a material be displyed in purchase order?
Ans:
a. yes surely you can displaythe revision level in the PO
2. If yes, can craetor of PO select the revision level of the material to be purchased when multi revision levels exist?
a.yes.in the purchase order item level data..in the material data tab you have the revision level. the purchases can change the revivsion level and the same can be printed in the PO.
3. Can the revision level of a material be seen / traced in inventory management? e.g. can material be stored seperately according to its revision level?
a.NO the revision level is for information we can not segeregate the stock at the revision level.
Kindly let me know hte feedback.
reg
Dsk

Similar Messages

  • Plant Revision Level in QP01 Selection

    Hi,
    We have a requirement to add 'Plant Revision Level' field in the selection screen of QP01. Do we have any configuration steps to select that field, so that it will appear in the transaction selection screen.
    It is critical requirement for business. Please share your solution options.
    Thanks & Best Regards
    Lakshmi

    Dear,
    Go to OP5A and select  task list header then select PP/QM task lists: header screens--here active redio button PLKOD-WERKS for plant. and PLKOD-AENAM change number
    SPRO--> Logistics - General> Engineering Change Management ( ECM) -> Revision Levels--> Define Revision Levels .
    SPRO--> Logistics - General> Engineering Change Management ( ECM) -> Set Control Data--> Revision Level Tab 5 check boxes so you can get idea of Revision Level Assignment
    Please check this come back.
    Regards,
    R.Brahmankar

  • What are the Uses of Revision Level

    Dear All,
    I have been searching for articles pertaining to "Revision Level" in the Material Master Record and found out that revision level is used purposely in Engineering Change Management and Document Management System. Is this true?
    I want to know if activating revision level can purposely be used also in tracking MRP Tab Changes in material master record. There are some cases that user change MRP Type and reorder levels (minimum/maximum) in the material master record and i want to record this changes and who made this changes. Can this revision level help me on this purpose?
    Can anybody please enlighten me on this revision level usage?
    Thank you.
    Regards,
    Bernardo Soledad

    Please check these answered links:
    Revision Level
    Revision Level
    Edited by: Afshad Irani on Apr 20, 2010 7:04 PM

  • Open PR Material Master Revision Level

    Hi,
    I am working on upgrade from 4.5b to ecc6.0.In this Project Material Revision Level and Change Number is assigned with Z Program.
    The Requirement is the Program has to check the Open PR 's and that particular Material  needs to be updated with Change Number and Revision Level.
    Now the Functional Specification to be prepared for the Technical Team -Based on the Open PR condition  -Now what are the fields to be specified in EBAN table in order to fullfill the open PR.
    As per my understanding Open PR means PO is not created and PO is created means that PR is closed.
    Or any other fields are to taken into consideration for preparing Functional Specification
    Please reply me ..
    Thanks for the reply.

    It is very much possible. You can try this use case. It's pretty simple. But Vice-versa is not possible.
    ~ Guru

  • Revision level in purchase order

    Hello all,
    when creating a purchase order for a material, the revision level from the material master will be automatically added to the Item-Material Data-Revision Level field.
    But what happens if in the meantime the revision level is updated on the material master, I guess the PO will not be updated on that field?
    The problem is, I need the updated revision level field on the output of the PO, currently I am using the field EKPO-REVLV in the sapscript which refers to the revision level data from the PO.
    Any suggestions?
    Thanks
    Anne

    Hi Prakash,
    I have tried to use this field in the form: AEOI-REVLV
    This should be the original table.
    I am using the standard print program for POs: SAPFM06P
    Unfortunatelly, somehow the value does not come up for AEOI-REVLV, but it does come up for EKPO-REVLV.
    Thanks,
    Anne

  • Cannot find the Revision Level field in the item details

    Hi All,
    1) I have created a PR with 2 items in the R/3 Backend using the me51n transaction in which for one of the items i have updated the Revision Level field.
    2) To transfer the purchase requisitions created in the above step to the SRM system(sourcing cockpit) i executed  the report BBP_EXTREQ_TRANSFER with transaction SE38.
    3) Now when i go to the SRM portal and navigate to find the external requirement in the sourcing cockpit, I am not able to find the Revision Level field entered in the backend.
    Can some one help.
    Regards
    Sam

    Hi
    Please go through this ->
    Version Management in R/3
    http://help.sap.com/saphelp_47x200/helpdata/en/8a/60b43bb7492147e10000000a114084/frameset.htm
    Versioning in SRM
    http://help.sap.com/saphelp_srm50/helpdata/en/42/c92d6e3ed16babe10000000a1553f6/frameset.htm
    Prerequisites for Version Control in SRM
    I)        You have activated the version control so that the system creates historical versions.
    See the path in the IMG: SRM Server  ®  Cross-Application Basic Settings  ®  Switch On Version Control for Purchasing Documents
    II) You have set up and activated the workflow for the approval of changes to active purchasing documents. See also: Approval Workflows for Documents and Objects
    ( Related link -> http://help.sap.com/saphelp_srm50/helpdata/en/5a/af5efc85d011d2b42d006094b92d37/frameset.htm )
    Some related SAP OSS Notes ->
    Note 1030548 - Revision level in SRM 6.0 connected to ERP 2005
    Note 1026021 - EXTREQ interface: Data transfer structures
    Note 122105 - ME51, RM06BBI0: Revision level is not filled
    Hope this will definitely help.
    Regards
    - Atul

  • Problem with Revision level for a Material

    Hi All,
    I have a problem with Revision Levels for a Material.
    I want to know the Revision Level for a particular Material for BOM Creation.
    Can anyone please let me know from which Table or Funtion Module can I get the Rev Level, once I pass MATNR (Material) and AENNR (Change Number).
    <REMOVED BY MODERATOR>
    Thanks and Regards,
    Harish Kalla
    Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

    HI,
    You can use table AEOI.
    Hope this helps.
    <REMOVED BY MODERATOR>
    Regards,
    Sipra
    Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

  • BOM explosion in subcontracting order according to revision level

    Hello experts
    I have different revision levels available for a subcontracted material, e.g. the BOM of this material has different versions depending on the validity date.
    When a BOM explosion is carried out in the subcontracting order (either in the purchase request or in the purchase order) the selected version of the BOM is done accordingly to the delivery date. It does NOT take into account the revision level even when I change it manually.
    Do you have any idea if it is possible to force SAP to consider the revision level instead of the delivery date for the BOM explosion ? (custo, user exit, BAdI, ...)
    Many thanks
    Amaury

    Hi
    BOM explosion in Subcon PO will be carried out automatically when you select the item category L.
    If you want to control the BOM selection based on the Alternative then you can go with Production version option and get the help from PP consultant to create the production version.
    Assign the production version in Subcontracting Inforecord.
    Click the BOM explosion button the switch to alternative BOM during the PO creation.
    Hope it helps
    Thanks/Karthik

  • Revision level not appearing in material tab of purchase order

    hi
    I have matained revision level in material master but it is not appearing in material tab of purchase order and print preview of purchase order
    regards
    Badari

    Hi, If u have created proper change no in CC01 with assigned object material with proper validity period u can give revision level to material.
    In order to reflect the current revision level on PO printout, the coding in PO print program should be designed accordingly to pick the latest revision level. PO output needs to be re-issued so that the new output can pick the latest information like PO revision level from the master.
    Refer below link also for more information,
    [Revision level in purchase order|Revision level in purchase order]

  • T.c FF7B: planning levels for Logistics

    Hi All,
    With reference to the Report FF7B and the CM data from Logistics,
    I've defined the  planning levels for logistics and the others steps under the CASH MANAGEMENT menù of SPRO.
    But the report FF7A doesn't prodide me the logistic data... are there other customizing steps out of the CASH MANAGEMENT menù of SPRO.
    Thanks

    Hi,
    If you have done the config as mentioned by Kalyan, i.e. define planning groups, assign/link them to planning levels and assign the appropriate planning level in customer/vendor master data either you run FF7B (for liquidity forecast) or even you can run FF7A, but need to tick the check box for liquidity forecast.
    thanks,
    Kumar

  • Define Planning levels for Logistics (Liquidity forecast).

    Hi Gurus,
      I am defining planning levels for logistics for my client inorder to see the purchase order items in liquidity forecast report FF7A/FF7B but I can only assign one vendor planning group to M2 as my requirement  requires all vendor planning groups to be assigned to M2 to see all the purchase orders items for all the vendor planning groups. Does anybody has any idea how do we assign?
    Thanks,
    Bob

    Hi Nirmal,
      I think that is for displaying per cash management group but thanks nirmal for replying.
    Regards,
    Bob

  • Inspection Plan/Revision level

    Hi PP Gurus,
    I have a Problem in Inspection Lot.The system is not reading the new Inspection Plan.
    The material is assigned to a Revision level with valid from date 10.12.2007 and the earlier Inspection Plan(Group 21) was also created on 10.12.2007.Now this inspection Plan( Group 21) is deleted and New Inspection Plan(Group 100) is created with the Valid from date 10.04.2008.
    I have created an Inspection Lot dated 12.04.2008, Now the system is not reading the new Inspection Plan(Group 100).And the system is giving error "No Insection Plan found" while recording result on the inspection lot.
    We cant change the material ECO revision date as this would contravene our traceability record and  since, the Revision Level is maintained at Global level so cant afford this to change for other Plants.
    Kindly help me to assign the new Inspection Plan to the Inspection Lot.
    Thx in Advance
    Regards,
    Rakesh wade

    Hi,
    I do not know the impact of rev&#305;s&#305;on level on &#304;nspaction lot.
    But, with reference to the Rev&#305;s&#305;on Level only the Conf&#305;rmation w&#305;ll work both in Descrete and aswell as in REM.
    Say &#305;f yor Reves&#305;on Level &#305;s AB, and the date &#305;s 01.03.2008, then during confirmat&#305;on the sytem will explode the BOM with referenec to this Date.
    It may be poss&#305;ble that there may not be any BOM available on that date then there w&#305;ll not be any Components suggested for GI or backflush.
    Probably you can corelate the same th&#305;ng to your &#305;nspect&#305;on lot... ( inspect&#305;on lot not available etc..)
    Hope th&#305;s helps..
    Regards,
    Siva

  • How to find revision level

    hi my requirement is that,
    i have to get the revision level for each material number in a specific plant,
    is there any function module which can get this data,
    actually this revision level has to be brought from table AEOI table,
    but its key fields are
    AENNR
    AETYP
    OBJKT
    i donot know how to get these fields.
    can some one help.
    thanks & rgds.

    hi charlie,
    thanks for the response,
    actually my problem was that the table AEOI had the value to be extracted but i didnot have input fields to retrive that value, what all i had were material number and plant,
    so i was asking how to find the link between matnr, werks and  fields  aennr, aetyp, objkt.
    anyways, i found from sdn that, we can pass matnr as objkt, and aetyp as 41( for material) ,
    and out of the records retieved latest would bare the correct revlv.
    thanks.

  • BOM Revision Level

    Hi,
    We are uploading the BOMs into server. While manual creation of BOM I am able to update the revision level of the BOM. But we are unable to update it while uploading through LSMW. Please suggest me in this regard.
    Thanks
    Ramakanth

    We have ECM in our project. 
    We have to take all the BOMs from the previous version of SAP and upload to the new all of them to the new version.
    All the BOMs have revision levels w.r.t. to a change number.
    While manually changing the BOM the revision level can be updated by entering the BOM w.r.t. a change number and then in the menu --> extras --> new revision level.
    Now we have to upload the BOMs through LSMW. It is not picking up the revision level while uploading.
    Please give your suggestions.

  • DIR - Change Revision Level

    Hello Friends,
    How can I change the revision level of a DIR without creating a new version?
    Per config, when I create a DIR it is assigned a rev level "-". Then I want to change it to an higher level "A" or "B" or whatever.
    I am using BAPI_DOCUMENT_CREATE2 and BAPI_DOCUMENT_CHANGE2 for my process. Eventhough I pass a different rev level, SAP creates the DIR always with the first revision level per the config, which in our case is "-".
    Any input/advise on this issue will be greatly appreciated!
    Thanks,
    Sam

    Revision level has to be changed using a separated function call - REVISION_LEVEL_UPDATE

Maybe you are looking for