Tracing report execution Problem

I am trying to trace report execution which gives me some problems!!!
First i tried to use report builder (via tools --> trace option) to add tracing options and then when i executed the report using View--> Runtime Priview it does not produce the trace file. This works if i am using Live Previewer instead of Runtime Preview.
But what i need is the trace file of runtime Previewer as it is giving me some problem.
If i programatically do it using report triggers using SRW built-in packages then the report builder itself closes and says RWBLD60 has generated an Error. Since my report is very complex i need the help of report tracing to confirm the flow and execution. Please can somebody shed some light into this problem....
It will be great if anyone tell me how to do it!!!!!.
i am using Windows 2000 & Reports 6i (6.0.8.11.3). IS THIS A BUG IN REPORTS 6i????
Thanks
Mahesh Mathew

The first thing I would do if I were you would be to upgrade to the latest patch version (we're up to about 6.0.8.23 now).
If you're still having problems with tracing you could contact support, or workaround by testing the report with rwrun60 and adding the tracing options on the command line.
Regards,
Danny

Similar Messages

Customized Crystal Report execution problem in Win 7

Hi Experts,
I am getting a screen of Server : Database : Userid : Password while attempt to run a customized crystal report from Win 7 based platform. In the screen database selection option is inactive so it is not possible to select the databse.
The OS of user PC has been formated recently current OS is Win 7 and before that it was XP running fine. Is it a report problem or any other problem please guide??
SK

Hi ,
are you running report from SAP ? if so , Run SAP as administrator(right click on SAP icon and click run as administrator) and run report - it will work fine .
if ypu are running report directly from crystal report , run crystal report as administrator.
or change crystal report connection from SAP business one to OLEDB and update datasource.
Thanks,
Neetu

Report execution problem

when i tried to create number range with respect to mateial group i got following error:-
System error during group maintenance
Message no. NR899
Diagnosis
The system has identified an inconsistency in the tables for number range maintenance.
System response
Program termination.
Procedure
In most cases, you can overcome this by executing the report RSSNR0T1 (Consistency check and repair of number range intervals) This report lists the inconsistencies and eliminates them (with F11 = "Confirm").
Sir please tell me exactly what i have to do in tcode SE38 .
Thanks in advance.I am online.

Please refer to SAP Note 11294 which will clear your issue.
Run Program RSSNR0T1 (using transaction: SE38)
Identiify and Insert the Material Master number range object to be used and if any Inconsistencies in your number range will be shown.
If there are any inconsistencies, save the results. Proceed recreate your number range group.
Edited by: Áshøk Kümàr Telikülà on Oct 16, 2008 11:18 AM

Report exection problem for one user - not able to see the data.

Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,

after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

BI Publisher report bursting problem

I am not able to make my report burst to separate files for ftp delivery. I am running BI Publisher version 10.1.3.4.1 (stand-alone). My data query looks like this:
select a.agency_id, b.borr_name
from agency_tbl a, borr_tbl b
where a.rpt_date >= 20100101 and a.rpt_date <= 20100110
and a.borr_id = b.borr_id
and a.agency_id in (80013,80019)
order by a.agency_id, b.borr_name
My bursting/delivery query looks like this:
select agency_id "KEY",
'mytemplate' as TEMPLATE,
'RTF' TEMPLATE_FORMAT,
'en-US' LOCALE,
'PDF' OUTPUT_FORMAT,
'FTP' DEL_CHANNEL,
'myserver' PARAMETER1,
'myid' PARAMETER2,
'mypwd' PARAMETER3,
'/home1/web-docs-443/files/pdffiles' PARAMETER4,
convert(varchar,agency_id) || '.pdf' PARAMETER5
from agency_tbl
where agency_id in (80013,80019)
and rpt_date >= 20100101 and rpt_date <= 20100110
(I have to put "KEY" in quotes because my database is sybase, and KEY is a reserved word.)
I have verified that both queries return data (6 records each, no null agency_id keys).
The goal is to create a file for each agency that lists their associated borrowers.
I can view the report without problems. But when I schedule the report and enable bursting, I get the "Job was failed" email notification, and the report history shows this:
Job Execution Information
History ID 218
Status Failed
Start Processing Time 3/21/11 10:27 AM
End Processing Time 3/21/11 10:27 AM
Time Elapsed 1.68 sec
System Message oracle.apps.xdo.servlet.scheduler.ProcessingException: java.lang.NullPointerException
     at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.java:2116)
     at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:358)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
Caused by: java.lang.NullPointerException
     at com.sun.java.util.collections.Hashtable.containsKey(Hashtable.java:300)
     at oracle.apps.xdo.batch.bursting.DeliveryXMLParser.processRow(Unknown Source)
     at oracle.apps.xdo.batch.bursting.DeliveryXMLParser.endDeliveryInfoElement(Unknown Source)
     at oracle.apps.xdo.batch.bursting.DeliveryXMLParser.endElement(Unknown Source)
     at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:210)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1318)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:263)
     at oracle.apps.xdo.batch.bursting.DeliveryXMLParser.getDeliveryChannels(Unknown Source)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.createEnterpriseReportRequest(Unknown Source)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.setDeliveryControlFile(Unknown Source)
     at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.java:1916)
     ... 3 more
Bursting Definitions
Bursting Node /ROWSET/ROW/agency_id
Delivery Node /ROWSET/ROW/agency_id
Any help will be greatly appreciated. This has me stumped . . . I am out of ideas.

What caused our bursting problem:
We had to put the word "KEY" in quotes (in our bursting query), because KEY is a reserved word in sybase. But putting it in quotes caused a problem - the results of the bursting query did not contain a "KEY" tag.
. . . And the solution:
We added the connection property "GET_COLUMN_LABEL_FOR_NAME=true" to our sybase datasource definition. Many thanks to Tim Dexter, and to Paul from the sybase forums (http://newsgroupstats.info/article/forums.sybase.com/sybase.public.jconnect/2308/Column-aliases-not-working.html) c. 2007.
And thanks again to Jorge for the helpful suggestion.
Steve Z.

Oracle Apps - How to create a table before report execution?

Hi,
I'm new to oracle apps, I created a procedure to get some values for a report and created a query to get the remaining values. Now I need to populate those values into a temporary table and after the report execution I have to delete the table. In apps there is no before parameter form. If any one can help me, that will great.
Thanks in advance.

Hi,
Do you really need to create a table INSIDE the report? It doesn't look like a good idea to me. For instance, what happens if 2 users try to execute the report at the same time? I would create a global temporary table before any execution of the report, and then I would just populate the data in the table in the 'Before Report' trigger. The data in a global temporary table is only visible at session level, so you wouldn't have any problems with multiple users executing the report at the same time and the data disappears once you finish your session, so you don't need to take care of deleting the data.
Hope it helps.

Report execution terminated due to oversized report data.

Hi
We are trying to run the OOTB report Trend By Category-Spend Trend Analysis by category.We are getting the message
"Report execution terminated due to oversized report data. Apply filters to narrow down result set." But we are not getting the link to Bex however the report is displayed in UI.
We get Bex link for other large reports.
Why is it not directing to Bex in this case?
Regards
Neel

Hi Neel,
You typically get a message (which can be customized in the 'Application Properties') when the size of a reports exceeds beyond a certain limit (which can also be customized in the 'Application Properties'). In the application properties you can turn on a check box that provides a Bex link.
So if you receive this message along with the BEx link for other reports and not for specific reports, this tells me that there might be other errors in these reports thats preventing from displaying the message. Please check under the UI application logs and also the portal logs to see if there are any additional messages, may be that will give you some clue as to what the problem might be.
Regards,
Rohit

Change Property of any field during report execution.

Dear All,
Can any one tell me that
HOW CAN WE CHANGE THE PROPERTY OF ANY FIELD IN ANY FRAM / SECTION, DURING REPORT EXECUTION ( I MEAN ACCESSING THE PROPERTY OF ANY FIELD IN TRIGERS ).
Please help ....

Thank You Dear aguero ...
You got my point but still it is not applicable. Don't worry, I have solved my problem by other way. The complete story is as under
PROBLEM
========
I have a field DT as a part of query and this field is in the group G_DT. I am using repeating frame based on the group G_DT. I have another TEXT ( not field ) B5 at the bottom margin of the page ( it is a stand alone text and not the part of G_DT ). I want that if DT >= '02-Oct-2007' then show B5 otherwise hide it.
SOLUTION
========
I have defined a user parameter P_Note as character. I have used this parameter in the triger BEFOREREPORT as under.
function BeforeReport return boolean is
begin
if to_date('02-'||:DT,'DD-MON-YYYY') = '02-Oct-2007' then
:P_Note := 'Y';
else
:P_Note := 'N';
end if;
return (TRUE);
end;
AND USED ANOTHER FORMAT TRIGER as under
function B_5FormatTrigger return boolean is
begin
-- Automatically Generated from Report Builder.
if (:P_Note = 'N')
then
return (FALSE);
end if;
return (TRUE);
end;
It works and my problem is solved ..
Thanks for your attention ...... dear aguero

Data in Table Control vanishes after report execution

Hi,
I have created a report program with a table control on its selection screen (on a subscreen).
The report executes perfectly, but, after the report execution, once the control comes back to the selection screen, the data entered in the table control gets cleared.
Please let me know how can I retain the data entered in the table control even after the report execution.
Regards,
David.

Hello,
When control comes back to selection screen. PBO event executes and possibly internal table has got cleared somewhere before that.
Debug you code to find the exact problem line. You can also add watchpoint for internal table with value initial. So code will break in debug mode whenever internal table is cleared.
Hope this helps!
Thanks,
Augustin.

Dear Apple Support, Good day to you. This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1.. After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to resto

Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>

1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working?

How can I report a problem with downloading?

I purchased a rather long album and halfway through downloading it gave me the message, "We could not complete your istore request. The network connection timed out. Error 8003." The only guidance it offers is to check the network connection. Nothing wrong there. Now I can get into the store and the balance of the album no longer shows up under downloads, just old stuff that really shouldn't even be there. I went into my account, and under purchase history clicked onto "Report a problem." All I got out of that is the same page minus the report a problem button.
I'm frankly sick of this iphone and all the problems I've encountered with their upgrade failures, but this disappearig report a problem just tells me they really don't want to hear from you and no one is minding the store.
Any other places to report a problem? Or advice onto how to get the missing songs?
Thanks., I've just spent the last 1-1/2 hours on this board and going back and forth in the istore and am very frustrated.

Click here and fill out the form for assistance.
(35548)

HT5429 How long after you report a problem does it take for the fix to be picked up in maps?

How long after you report a problem does it take for the fix to be picked up in maps? The street I live on is misspelled. It's shown as one word, but it should be two words. Maps cannot find the address when it is spelled correctly, so I have it purposely misspelled it as one word in my contacts, which helps for the most part, however it still tries to place my home on an entirely different street all together. Fortunately this new random street is at least close to where I live. When I used to spell my street correctly with two words, maps would try to send me to the next town over. So it kind of works, as long as I misspell my street, and ignore the fact that it is showing where I live to be a couple of streets down from where I actually live. I live in Connecticut - not in the most populated of areas, but not in the middle of nowhere either. Amazingly enough Google Maps will correctly find my address whether it's spelled with one words or two words. Google Maps also shows my apartment complex, which Apple Maps does not. I really wish Apple would just do a quick pass of the area to fix these issues. I’ve reported the problem several times, months ago. How long will it take for there to be a fix? I keep trying to use the Apple ecosystem, but Google is clearly the better solution for me.

Apple does not do the GIS data for maps. That comes from 3rd party vendors like Tom Tom. I have read it takes some time to update map data. The only thing you can do is report it.
Not to belittle your complaint, but on my end it is Apple that is clearly better. When looking at my house in Google, the satellite photo is more than 4 years old, and the Apple one is much newer. I can tell because of the condition of my home and the neighbor's. They had an above ground pool which was removed 4 years ago and it shows on the Google Map. I had remodeling and roof work done to my home that started 3 years ago and Apple's satellite view showed this work done, which took over a year to complete. I live in the middle of a block in a rural town. Both Apple and Google split the block into 100 parts and put my home close to the beginning of the block instead of where it actually sits. I've reported it to both Google and Apple and no one has changed. Just one of those things. But, keep your chin up, it will get corrected eventually.

Sub Report Performance problem

Our current software configuration is Microsoft SQL Server 2008 R2 (10.0.2531.0) where our data is housed. Our User Interface is Microsoft Visual Studio 2008 (Visual Basic) and Microsoft .NET 3.5 SP1 platform. We use Crystal Reports 2008 (12.0.0.683) to do our reporting.
We upgraded from Crystal Reports XI and our reports are taking a long time to render?... Is there any evidence of other companies experiencing this trouble? Are there any degraded performance issues when moving from XI to 2008?
In some cases we utilizing a small simple sub report.
Any help appreciated. Thanks.

Hi Billy,
Subreports in detail sections are never a good idea. Example, you have 100 records returned int he main report and if that field is your subreport link it causes the subreport to run 100 times. Your database is being queried 101 times.
Also, the default time out for database is typically 1 minute, could be you need to verify your report and database so CR can "clean up" any wrong pointers.
It's always better to do the data collection server side if and when possible, after all that's what they do best.
Not much detail to go on so I can't say if it's a report design problem other than the above or not. It could be also that .NET takes time to load all of the CR assemblies so depending on how you have your app configured depends on the delay. If you load a dummy report when your starts up to pre-load CR runtime then subsequent reports will be much faster.
Also check off all of the Verify Database options, you may be telling CR to verify each time which on big databases can cause a delay also.
Thank you
Don

Interactive report performance problem over database link - Oracle Gateway

Hello all;
This is regarding a thread Interactive report performance problem over database link that was posted by Samo.
The issue that I am facing is when I use Oracle function like (apex_item.check_box) the query slow down by 45 seconds.
query like this: (due to sensitivity issue, I can not disclose real table name)
SELECT apex_item.checkbox(1,b.col3)
, a.col1
, a.col2
FROM table_one a
, table_two b
WHERE a.col3 = 12345
AND a.col4 = 100
AND b.col5 = a.col5
table_one and table_two are remote tables (non-oracle) which are connected using Oracle Gateway.
Now if I run above queries without apex_item.checkbox function the query return or response is less than a second but if I have apex_item.checkbox then the query run more than 30 seconds. I have resolved the issues by creating a collection but it’s not a good practice.
I would like to get ideas from people how to resolve or speed-up the query?
Any idea how to use sub-factoring for the above scenario? Or others method (creating view or materialized view are not an option).
Thank you.
Shaun S.

Hi Shaun
Okay, I have a million questions (could you tell me if both tables are from the same remote source, it looks like they're possibly not?), but let's just try some things first.
By now you should understand the idea of what I termed 'sub-factoring' in a previous post. This is to do with using the WITH blah AS (SELECT... syntax. Now in most circumstances this 'materialises' the results of the inner select statement. This means that we 'get' the results then do something with them afterwards. It's a handy trick when dealing with remote sites as sometimes you want the remote database to do the work. The reason that I ask you to use the MATERIALIZE hint for testing is just to force this, in 99.99% of cases this can be removed later. Using the WITH statement is also handled differently to inline view like SELECT * FROM (SELECT... but the same result can be mimicked with a NO_MERGE hint.
Looking at your case I would be interested to see what the explain plan and results would be for something like the following two statements (sorry - you're going have to check them, it's late!)
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two),
sourceqry AS
(SELECT b.col3 x
       , a.col1 y
       , a.col2 z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5)
SELECT apex_item.checkbox(1,x), y , z
FROM sourceqry
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two)
SELECT apex_item.checkbox(1,x), y , z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5If the remote tables are at the same site, then you should have the same results. If they aren't you should get the same results but different to the original query.
We aren't being told the real cardinality of the inners select here so the explain plan is distorted (this is normal for queries on remote and especially non-oracle sites). This hinders tuning normally but I don't think this is your problem at all. How many distinct values do you normally get of the column aliased 'x' and how many rows are normally returned in total? Also how are you testing response times, in APEX, SQL Developer, Toad SQLplus etc?
Sorry for all the questions but it helps to answer the question, if I can.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)

Report generation problems on the WinNT target machine

I'm using report generation VI's to generate a standard report, mixed with text and graphs.
In development mode (LV 6.0.2; Win-NT 4.0 SP6)there are no problems to print it. As soon as I make an application (application builder 6.0) and transfer it to the target machine (Win-NT 4.0 SP6; run time engine 6.0.2) I get an error -2147352567 unable to load picture..to Append front panel image to report.vi> If I delete the VI "Append front panel image to report.vi", I can print the text of my report without problems. Do you have any idea?

I could fix the bug in the meantime. I had installed an older version of the Internet Explorer. When I updated the target PC to Internet Explorer Vers. 5.5, there are no problems anymore. I think it must be a problem of ActivX.

Tracing report execution Problem

Similar Messages

Maybe you are looking for