Tracing the Customer Number For deleted parked document

Hi,
I have wrongly deleted the park document . My client wants to know the customer Number of the deleted park document. Where can I fetch this details from.
I found that the Accounting document Number is stored in table BKPF with a deletion flag Can u please suggest which table the deleted customer no. for the park document is stored
Thanks in advance
Ratna & Susan

Hi Rathna
Oneway to find out the customer number is, thro transaction FBL5N, select all customer open items (with key date before the parked document was deleted) and select the noted items also.
You will be able to see the document.
Thanks
Ashok
Reward points if this is useful

Similar Messages

Security for deleting parked documents

Is there a way to secure who can delete parked documents? Currently, we only allow a certain group of users to delete parked documents. However, I would like to have a way for the creator or someone authorized for the account to delete them instead. When we first tested it some time ago, there did not appear to be any checks for security authorizations.
We are on ERP 04 (ECC 5.0).
Any suggestions?

I just attempted to duplicate the error message you were getting by pinpointing a parked document from 2006 created using FV50. I verified that the document contained cost centers and all CO posting periods from 2006 were locked in OKP1.
I pulled up the document in display mode, clicked on Document in the top left corner and went into change mode, then I clicked on document again while in change mode and selected "Delete Parked Document" and the document was deleted without error. Is this the same deletion method that you are using?
Like the previous response, I don't see how opening the CO posting periods will have any negative impact especially if FI posting periods are left closed.

Deleting Parked Documents for Previous Years

Hi
We have got 800 parked documents with a posting date between March 2003
and May 2010. As per audit requirements we need to delete all these
parked docuents which are mostly created through Tcode FV50 or FB50
usin parking option as we don't want to actually post them in system.
These docments have profit centre or cost centre entries in them as
well. Now when we try to delete these parked documents we get an error
message 'Transaction CO Through-postings from FI has been locked'. We
don't want to open the close CO period as it can use great problem to
us so can you please tell us some alternate way or some programme which
can be helpful to delete these parked documents without opening the
closed CO periods. I will really appreciate your kind response in this
regard.
Kind Regards

I just attempted to duplicate the error message you were getting by pinpointing a parked document from 2006 created using FV50. I verified that the document contained cost centers and all CO posting periods from 2006 were locked in OKP1.
I pulled up the document in display mode, clicked on Document in the top left corner and went into change mode, then I clicked on document again while in change mode and selected "Delete Parked Document" and the document was deleted without error. Is this the same deletion method that you are using?
Like the previous response, I don't see how opening the CO posting periods will have any negative impact especially if FI posting periods are left closed.

What is the phone number for customer service ... I want to pay my bill

what is the phone number for customer service ... I want to pay my bill

Hello Roofking,
I'm sorry for your troubles. I have provided the steps to using the automated system below. This feature is free of charge.
Call 1-800-COMCAST (1-800-266-2278) or 1-800-XFINITY (1-800-934-6489)
Select preferred language (the system will default to English).
Enter the phone number.
Select option 2 for Payment.
Select option to make a one-time payment.

BAPI for the T-Code FBV0 post parked document

Hello Experts,
Is there any BAPI/Fuctional module that can be used for posting parked document(t-Code FBV0).
Thanks,
Srikanth

Hi,
Go to SE37 and type ' PRELIMINARY_POSTING_* '
u'll get a few function modules.
OR
you can check in Function Group F040.
Regards,
Samson Rodrigues.

How to list Deleted parked documents

Hello friends
I have a question that I wait you can answer it. I need a report that shows the deleted parked documents. I have been trying through FBV3 and FB03 but don't show documents.
I am currently working on a project implementation R / 3 version 6.0. Here are a user that has created a lot of parked documents that can be displayed in FB03 and FBV3. But every deleted parked documents (BSTAT = Z) don't are displayed.
For more information, I tell them the steps we are taking to this:
1. We created a park document
2. We delete the park document
3. We enter to FB03 with number, company code and year and can see document
4. After that we push document list button and dynamic selections (BSTAT = Z) and execute
5. Document list is empty
6. We check document in BKPF table and can see that has BSTAT = Z
I have been looking SAP Notes about this and found 1320519 and 1317523, but aren't precisely about my problem.
I wish you can help me, either with a good report or a note to correct the problem.
Best Regards
Marco

Thanks by your answers, but I'm still in a doubt.
If document is still in BKPF, should be display when I execute list button and dynamic selections in FB03?.
Because this, I feel that reports RFBUEB00 and RFBUEB01 needs a correction.
Am I in correct or not?
Greetings
Marco

What is the keyboard shortcut for "delete row" in a table?

What is the keyboard shortcut for "delete row" in a table within a pages document?

Click on the row number to select the entire row. Right-click, and select Delete Row from the menu. There is no keyboard shortcut.

Delete parked document still committed budget

Dear SAP-ers,
I do budget active checking with BCS, the problem is when i do deleted Parked Document using FBV0, the budget still committed. For display this, i am using the standard report painter 4FM (Budget Usage).
Anyone can help me ?
Thanks
Regard's
Silvy

HI,
Please refer the note 100409.
Reg
Madhu M

Display document header for a parked document in ECC 6.0

Hi,
Does anyone know how to view the header information of a parked document? I cannot find the u201CDisplay header/hatu201D icon anymore when I go to display a parked document via FBV3. This is in ECC 6.0 whereas; in 4.6C I see the u201Chatu201D icon. For the same parked invoice, in ECC 6.0 it is calling FV63 whereas in 4.6C it is calling FBV3 internally to display the parked document when document, company code and FY are input on FBV3 and hit continue.
Please let me know if there is way to display header info for a parked document in ECC 6.0.
Thanks,

Thanks for your reply!!
What document are you displaying? I tried displaying a parked vendor invoice and that is when I do not see the hat icon. Probably you are displaying a G/L document (example SA), I am able to see the hat icon in that case.
In 4.6C, it calls FBV3 internally for displaying both invoices and regular g/l documents whereas, in ECC 6.0 it is calling FV63 if it is an invoice and on FV63 I do not see a hat icon. So, was wondering is that how it is or is there any setting that needs to be turned on?
Thanks,

What's the Part Number for an IdeaPad S12 recovery disk?

Hello,
I have an IdeaPad S12 (NVidia Ion). The recovery partition is gone. What's the part number for the recovery disk?
I mainly work with ThinkPad systems and Lenovo has an excellent part number system that covers just about every part you could imagine on a ThinkPad laptop. I assume Lenovo is also using this or something similar for it's consumer-line laptops. Sadly, Lenovo doesn't treat it's consumer laptop line with the same dignity as the ThinkPad line, and no customer support agent would tell me the part number, so I'm resorting to the forum for finding it.
Please help.

Hi and welcome,
the ideapad as consumer-line has no part list ....as the thinkpads have...
regards KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

What's the model number for my HP tablet

HP provides a type of model name near the screen of your tablet, but this name or number might not be sufficient to get proper support for your tablet. These names or numbers might represent a series of tablets that look similar but have different options and parts.
Having the exact model number is important for software and driver downloads, product updates, helpful documents and technical support for your HP tablet.
HP Tablets- How Do I Find My Model Number? shows you how to find that exact model number you need, which is generally on the side of the product.
For example, here is where you can find the model number for the Slate 7.
The numbers after P/N (Product Number), give you the information you are looking for.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

floridainiowa wrote:
I don't have any numbers on my tablet case. Where can I find it? It should be somewhere I can find it in the screens.
Are you typing on the tablet that you are asking about? The Forum has already identified it as an HP TouchPad!
Go to the Settings Tab, then Device Info. There you will find the model number (aka "Product Number")
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Return to vendor via delivery, customer number for each vendor?

Hi
We wish to use return materials to Vendor via delivery process
addition to required configuration, we need to maintain Customer number in Vendor master
In out plant we have more than 500 Vendor masters, do we need to create customer number for each vendor? or can we create a generic customer ????
Business has a concern on creating customer for each vendor since number is huge, Sales guys may get confused with these numbers
Please suggest a way out
Thanks

Thanks Jurgen for the reply
We have Vendor Work flow setup in the system. Which means when ever vendor master is changed [Return indicator ticked] workflow kicks off which means it goes for approvals. This is why we dont want to go for tick as and when needed. When ever there is a return, return to vendor must be ticked, it will go for approval etc so it slows the process
we are thinking if we can achieve through data load before SAP GO-Live so that users able to return without any delay
NOTE 447070 says 'the automatic creation of the required customer data is not supported in the data transfer'
this is related to automatic customer create isnt it
i was thinking as below
--> Create Ship-to's for all vendors
--> Load vendors via LSMW [along with return to vendor ticked and customer number(created above)]
Tested in SAP
created ship-to
Created vendor with above customer number
Do you see any issue?
Thanks

TextEdit is the default application for my Numbers documents

Although I did not set it to be, TextEdit is the default application for my Numbers documents. It was not always this way, but it is now, and I can't seem to change the default application back to Numbers ('09). For example, when I double-click any .numbers document, I always get the following error message:
The document “xxxxx.numbers” could not be opened. The file isn’t in the correct format. The file might be corrupted, truncated, or in an unexpected format.
See: http://screencast.com/t/P5OSAJAq
Therefore, whenever I want to open a.numbers document, I must drag it to the Numbers application icon or right-click and select “open with” and select Numbers from the list of applications. Although this works fine, it creates a couple of extra steps that I would prefer not to do
My first inclination was to “Get info” and change the “open with” back to Numbers for all .numbers documents.
http://screencast.com/t/TMJwBmTOkHN
http://screencast.com/t/LAnPsbeGdB
However, selecting Numbers as the default application will not persist after clicking “change all.” Rather, it reverts back to TextEdit. Tony, this is the only way I know how to select the default application for a document type.
Is there another location where I can set/reset the default application?
Thanks!

I guess that there is at least one database used by the Operating System which is corrupted.
Run a maintenance application : MAINTENANCE is a free very good one available thru :
www.titanium.free.fr/
and ask it to repair permissions,
delete caches
repair database Launch Services.
Yvan KOENIG (VALLAURIS, France) jeudi 26 mai 2011 15:51:58
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Determine the customer numbers for which the installations

Dear All,
I configured VAR Service Desk on SolMan EhP1 + SPS 20, Everything is good, but I have a problem when run report AI_SC_GET_SAP_CUSTOMER_NUMBERS. It can determine my customer numbers, but have only my installation number in table V_AIINSNRS. There are no any installation number of my customers in table V_AIINSNRS .I need installation number of my customer are included in V_AIINSNRS. Please show me about that. Thank you very much!
Thanks and Best Regards,
Tru Hang

Hello,
This is the text from the SPRO activity help:
1.3.9.3.3 Data Transfer from SAP
Use
You can copy the following system data from SAP into the System LandscapeMaintenance (SMSY):
- Name,
- System number,
- Installation number
- Product version.
All data can be copied from SLD or RFC connection. This is an alternative for service providers who
have no, or only restricted, connection to their customers via SLD or RFC.
Requirements
You have determined or maintained the customer numbers for the systems to be generated.
Default Settings
The system automatically generates IBase components, which you need for the Service Desk and Change
Management scenarios. If you do not want IBase to be generated automatically:
1. Choose the transaction DNO_CUST04.
2. Deselect the field: IB_GEN_AUTO (description: Automatic IBase Generation).
3. Save.
Activities
Set Automatic Generation flag
You can:
1. Generate all systems per customer number, or
2. Generate systems per installation number
Case 1: Flag/check whether all systems with a customer number are to be generated, and maintain the
maintenance view V_AISAPCUSTNOS. In this case, the system ignores the flag at installation level.
Case 2:If you select installations for which systems are to be generated, maintain the maintenance view
V_AIINSNRS.
Maintain Settings in SMSY_SETUP
4. Choose: Edit -> Expert Settings.
5. Enter the value A or N for the option Generate Systems by OSS:
- A: Systems are only generated if a 3-digit alpha-numeric ID has been specified for the customer
in maintenance view V_BP_SPC, to distinguish the long names of systems with different
customer numbers, e.g. a system SOL for the customer SAP would be SOLSAP01.
- N: New systems are numbered sequentially when they are generated. System SOL would be
SOL00001.
6. Save.
Data is created by background job REFRESH_ADMIN_DATA_FROM_SUPPORT , which
should be scheduled regularly. If you want to copy the data immediately, you can schedule it
immediately . Check in the job log of transaction SM37 that it ran successfully.
Note: The user under which the job runs must be in the table AISUSER , with authorization for
system data maintenance in the SAP Support Portal.
I hope this information helps.
Best regards,
Miguel Ariñ

Which FM to use to change the PO number in an Invoice Document with status = 3

Hi Experts,
My requirement is to change the PO number in an Invoice Document. The Document Status (RBSTAT ) is 3. I tried with 'BAPI_INCOMINGINVOICE_CHANGE' but its not working instead showing a message 'Further processing of document not possible (Faulty status)'.
I guess this BAPI works for only invoices with status A, B, C, D or E. Please suggest me how to solve this.
Regards,
ABAP User

You don't need to as Breakpoint mentioned. The values are determined by the data you pass to the function module - if you need a different value in your 6.0 system than you have in your 4.6C system, then you need to adapt your call accordingly, e.g., blocking or closing any open items that you no longer need and thus setting the status to 'C' in one of the VBUK/VBUP fields.

Tracing the Customer Number For deleted parked document

Similar Messages

Maybe you are looking for