Tracing the line item change in a accounting document

We have to send accounting document line items details which have been created or changed to non-SAP system.
I am looking for way to identify the line items which have been changed as I don't want to send the other line items of the accounting documents which are not changed.
Thanks.

Shailendra,
You've hit the nail on the head - CDHDR and CDPOS are the central repository tables that contain all changes - wherever logged.
There's no other way.
P.S.: I'm assuming you know how to extract data from these tables - so am not going into it.
Remember to assign points if found useful.
Regards
Gulshan

Similar Messages

Separate line item for taxes in accounting document of MIGO

All SAP Gurus,
As we can have separate line item for Freight amount (Freight amt credited) in accounting document for MIGO.
Similarly is it possible to have separate line item for tax amount which is inventoried.
Regards,

Hi Rajan,
Freight is from pricing procedure whereas tax is from taxing procedure.
Tax cannot be shown in separate g/l in MIGO.
Reason:
If u wanna show tax as separate item then we need to debit tax a/c in migo as well as it has to go to inventory which is not possible(double accounting enrty on debit side).
I too tried to do the same by specifying 2 for posting indicator and selecting non deductible for the nonsetoff account key used in the taxing proceudre in OBCN but it is behaving like setoff tax.
U can also try doing the same and then check.
Reg
Raja

Unable to see line items in segment clearing account

Friends,
Why we are unable to see the line items in intersegment clearing account/zero balance clearing account, eventhough the master is maintained as open item and line item display.

Hi,
I have received the following error message.
Account 1999990, company code xxxx is clearing account
Message no. MSITEM111
Diagnosis
You have stored account 1999990 in company code xxxx as a clearing account. At the same time, you use line item management with this account.
System Response
Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
Procedure
Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.

Expense (PR05) - Line item change report

Hi:
We are looking for a report on the changes made in the trip line items after the trip was submitted, approved, transferred to FI (at every status).
Basically if a consultant has submitted an expense and is approved by the manager, Then if consultant is opening that trip again and making the changes in the line item (change in cost object, amount etc) or adding a new line, we need a report which tells when was the change made, what was the change etc.
With the custom program, we are able to get the trip status history but not the line item details (change).
Any suggestions.

It tells the status of the trip but doesn't tell me what change is made.
For example:
If the original trip had one line for Airfare (say 1000) which was approved and transferred.
Later on this was adjusted to Airfare (say 1010) which was again approved.
We want to know amount was changed from 1000 to 1010 on this date. Similarly to cost assignment. Any field which has accounting effect.
Basically our Accounts payable needs to know if they should settle the expenses without waiting for the receipts at month end (in the scenario where cost object is changed later but amount is same, so there is no revised receipt from consultant. They can just settle it again)
Some kind of report which tells when and what change was made (at item level).
Thanks.
Rahul

Order of Line Items change when billing

Hi all,
For some reason the order of the line items change when billing a salesorder
Salesorder line items:
10
20 text line
30
When billing it changes in:
20 text line
21
30
I'm kind of lost on how to solve this.
With kind regards,
John Waltmans

try to do with copy controls... VTLA.. sales doc to delivery doc.. goto item and there take item categioreis..
there check wethere data transfer
101
0
2
reard if it helps..
Ramki

How to change the posting date at the line item level in a sales order

how to change the posting date at the line item level in a sales order

Hi,
I believe the POSTING DATE will appear on the accounting document
In the Accounting document, the posting date will be based on the Billing date.
Please let me know if you need any more details
santosh

How to get the change mode option for the line items in SC

Hi Everybody,
1. when the SC has 2 line items and in that if both the line item are rejected by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line items of both the rejected one, the change is enable and the requester can do the changes in the line items of the shopping cart which is working fine. but in the other case
2. when the SC has 2 line items and in that if any one of the line item is rejected and other one is approved by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line item of the rejected one, the change is getting disabled but for the approved line item the requester can able to do the changes.
so can anyone help me out how to solve this issue that if any one line item is rejected in the shopping cart also it should get the editable mode when the requester wants to do any changes.
thanks in advance.

Hi Everybody,
1. when the SC has 2 line items and in that if both the line item are rejected by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line items of both the rejected one, the change is enable and the requester can do the changes in the line items of the shopping cart which is working fine. but in the other case
2. when the SC has 2 line items and in that if any one of the line item is rejected and other one is approved by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line item of the rejected one, the change is getting disabled but for the approved line item the requester can able to do the changes.
so can anyone help me out how to solve this issue that if any one line item is rejected in the shopping cart also it should get the editable mode when the requester wants to do any changes.
thanks in advance.

Change Assignment Field in the Line Item

I'm trying to change manually the Assignment field in the Line item of a FI Document but the field is not open for entry.
In the SPRO -> Document Change Rules, Line Item settings are correct and should allow change of the field. Do you have any ideas on that problem?

Hi
Assigment field it system given no , the main purpose of this field is to idetify the particular line item system not allowed to chavge that one once u save the document?
Rams

The Line item text transfer from SD-Billing Document to FI Doc(Accounting)

Hi Experts,
Actually in Standard process the Line item text doesnu2019t get transferred to FI Doc-Accounting Document.
But we have a need to ensure that the Line item text of a material gets transferred from a Billing Document to Accounting document.
Please advice how can we achieve this.
Thanks in Advance
Montee

Hi,
If you want to populate the field SGTXT in FI tables (BSID, BSAD, BSEG,...) check the enhancement SDVFX002. So, in the function EXIT_SAPLV60B_002 you can populate XACCIT-SGTXT when you run the invoicing process.
I hope this helps you
Regards,
Eduardo

Change the status profile assigned to the line item from PROFA TO PROFB

Hi Experts,
The issue we are having relates more to the fact that the code we have written is changing the item category, however the status profile has already been retrieved from configuration based on the original item category and therefore the status selection that we are getting is incorrect.
Item Category A -> Status Profile PROFA
Item Category B -> Status Profile PROFB
For example we have a line item and item category A is determined through config, this then retrieves its associated status profile PROFA. However we have then coded the system to change item category A to item category B. However the status profile still remains PROFA.
We need to find a way to change the status profile assigned to the line item from PROFA to PROFB.
any quick inputs from any one please......
Thanks in advance
hemanth

Hi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR

How to change the line item storage location during the sales order creatio

How to change the line item storage location during the sales order creatio

Hi Kumar,
I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
Regards,
Rachel

Make changes to the line item depending upon doc type n sp. GL ind in F-48

I want to make changes to the line item depending upon the document type and special GL indication for the transaction code F-48.
Depending upon document type and special GL indicator i want to calculate the work contract tax during simulation in transaction code F-48.

Hi,
You want to deduct WCT when you use particular document type and special gl indicator.
I just want to know the reason why you want to determine the WCT based on the above conditions.
I created WCT as withholding tax types and assigned to vendor master. So when the user booking transactions he will choose the respective WCT tax type and tax code so system will deduct the amount and the same updated in WITH_ITEM.
Or you made a down payment request through T.code F-47 and when you want to book the actual transaction in F-48 then choose line item from down payment request.
Give me your requirement in clear if the above is not clear
Regards,
Sankar

What is the Table to Capture line item changes in PO?

Dear Guru's
what is the table in which i can find the report of ammendment in the PO at line item level OR is there any Standard SAP report ???
please help..
gaurav

Go through Following Link
Report on Purchase order header changes and Line item changes.
Vipin

Freight Calculation based on the net value of the Line item

Hi SAP Gurus,
I have one requirement for Freight calculation(Sales order is created through an IDOC) :
In the idoc,we will receive a freight dollar amount - which will be the total amount of freight.(example 100)
We will also receive sales dollar for each line item ,which is then passed to the pricing procedure, for a total amount of sales for that Sales order.
(examples below, for a total of 1500)
The 100 is to be posted to a freight G/L account.
The 100 is further divided by each profit center of the materials on the Sales order.
The freight is split out amongst the profit center , based on the net value of the line item.
Freight value to be allocated = Line item value/total value of the sales order * Freight amount.
Total of the sales order =1500
     Line item value     Freight value calculation     Profit center
Material A:      800          800/1500*100 = 53     Profit center A
Material B:     500          500/1500*100 = 33     Profit center B
Material C:      200          200/1500*100 = 13     Profit center C
Please let me know how to achieve this functionality in pricing procedure or what changes i need to make in Freight condition type.
Thanks in advance,
Bhakar Saha

Were you able to resolve this issue of allocating freight costs to line items/profit centers using the net value of the line items?

How to clear the line items...

hello friends,
I am not able to clear line items with F.13 transaction for special G/L Account..i am inputing the values with the Transactions F-48 and F-43(In each transaction v have assigned the same assignment (BSIK-ZUONR)) line items has to be cleared based on Assignment....we can view the details in Tr.code-FBL1N.
Can any one help me...plzzz
vamshi

Hi PK,
1. Should we maintain OIM for all Excise G/Ls (BED, ECess, SHECess)?
- Please DO NOT maintain OIM on BED, ECESS and HECESS, only to be maintained for Cenvat Clearing Account. Also note that clearing of Cenvat Clearing is not easy, as in standard SAP, the assignment field is not updated with the same information for the Dr. and cr. line items of Cenvat Clearing Account. You need to use an exit in Substitution for it to populate the P.O. no. and line item at the time of MIRO.
2. How to clear the BED Excise GLs which is with OIM in our system, it is thru F.13 only?
You can use F.13 only if the entries are matching not otherwise, else clear all of them manually if you have good control of your account balances.
3. Can we activate or deactivate OIM any point of time, I mean can it be activated in case the G/L balance amount is not ZERO?
OIM activation for a GL - Refer Note No.1356457.
OIM Deactivation : You can deactivate OIM after making the balance Zero on that Account and by changing the Message No. FH 190 to warning in OBA5.
4. What is the use of T Code J2IUN, I have gone thru the SDN links, but I am not able to execute the screen. What parameter should we select while executing J2IUN, when we use Pay cenvat from ser tax cr and Pay ser tax from cenvat cr.
J2IUN is to utllize Excise Duty. The liability of Excise duty is utilized from Excise balances of BED, PLA , Service tax etc.. as per business requirements.
Hope this helps you.
Regards,
SAPFICO

Tracing the line item change in a accounting document

Similar Messages

Maybe you are looking for