Track 1 bleeds into transistions on track 2 and 3

I have 3 video tracks on my timeline.  Track 1 runs, uninterupted, from start to finish. Tracks 2 and 3 have clips that overlay track 1.
The problem is that track 1 keeps bleeding through transitions taking place on track 2 and 3. It occurs right in the middle of my transitions.
How do I prevent track one from bleeding through my transitioning clips on tracks 2 and 3?
Also, I have inserted some still images that overlay track 1.  In one of the images I got a message that asked if I wanted to fill the background; something to do with the background being solid? 
Anyway, one on my images filled in the track 1 frame but two of them show track one behind the still imagaes; where the image doesn't fill the frame.
1. What is the frame size? 
          If I create an image in Ps what size should I make it so it will fill the frame; and what resolution setting should I use so the quatlity matches the video?
2. How do I create a background that overlays the frame; so there is a solid backbround behind images that I add that aren't full frame?
                         Also, can I create a background effect; like textures, etc.?

Does that do what you need?
Nope
That enlarges the clip and it is already topped out; which is to say it already fills the frame top to bottom.  What I imaged is that there would be a way to, somehow, create a layer behind the clip; that woulf fill the frame, so Video 1 didn't show at the outer edges of the clip.
It looks like I will have to create a background layer in Ps, then layer the image on top if it; then save it and add it back to my assets.  Then the clip will cover the whole frame.
ps I just stumbled onto the solution;  but I don't know why it works.
1. I put the B&W clip on video 2; by itself.  As expected it doesn't fill the frame.
2. I put the clip of the relief; by itself, on video 2. As expected it fills the frame.  This time I dragged it out along the timeline then
3. I placed the B&W clip ON TOP of the relief in 2; instead of above it on Video 3.
Why does it now fill the frame?  Why did it get wider, but not taller?
Finally, I dragged the edges of the relief in on both sides, so they were no longer visible and voila; problem solved!
But why does this work
pps
Message was edited by: mikecox_ Added screenshots

Similar Messages

  • Track Bleeding

    A project I'm working on has two tracks. One is an audio instrument with acoustic bass (EXSP24) and the other is an audio track for guitar. When I record guitar on the audio track and play the audio file alone I hear the acoustic bass on the file as well. Why is an audio instrument track bleeding into my audio file?

    Haha, mate, this is how you learn!!!
    In fact, there are some fairly interesting effects you can get by recording something through a guitar's pickups... Try holding notes on the strings and sliding and things. It's a really amusing thing to play with, and after a bit of playing, you can get some funb sounds. Anyway, this is what these forums are for!
    best, Fred

  • When trying to upload a cd onto itunes it chooses to chop the original cd into 4 separate albums and mix up the track order. Any ideas why and how to overcome this problem?  ( the cd is guy gerber and called fabric 64)

    When uploading a cd onto itunes on my imac it has choosen to copy the original cd into 4 seperate cds and mix up the track order, particularly annoying as this is a mixed cd (Guy Gerber, fabric 64) .  Any ideas why when everthing else copies perfectly and how to rectify this problem?

    See Grouping tracks into albums.
    tt2

  • HT200169 Having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Sug

    Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?

    Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
    Ian Turner wrote:
    Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
    Ian

  • When panning full left and right in logic pro 9, how can i stop one side from bleeding into the other?

    I'm creating a Click track for live performance. I Have 3 audio tracks panned full left (-64) and a Click track panned full right (63) but when I play the track they bleed into each other. If anyone knows a way around this that'd be great

    Eddie,
    I just ran a test on my G5 Logic system (Logic 9.02) with an internal RME PCI 8in/8out Audio Card and I get perfect separation bouncing to a stereo audio file using standard panning. Click on one side and a couple of crunchy guitars on the other. Each side is completely separate.
    So, it seems to point to your hardware unless you have some other audio routing that we've missed.
    I'm re-doing my setup so I may try a couple of other tests as I go along.
    pancenter-

  • On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up?

    On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up? The tracks are from voice recordings that were downloaded from an extrernal drive and weren't necessarily tagged as spoken audio. Do I need to go back into itunes and relabel these tracks so they will show up on my ipad2?
    Thanks in advance for your help!

    With the iPad connected to the computer, while iTunes is running, click on the iPad name on the left side under devices. Click on the Movies tab and look for Movie Rentals. You want to "Move" the films to the iPad.

  • When importing a cd it splits the album into separate individual tracks instead of 1 album with numerouse tracks - how do I get them all together

    When I import a CD from the Apple Mac drive it splits the cd into numerous single tracks in itunes instead of 1 album with all the tracks. How can I get it to import to the one place. I did try importing the same cd on a friends apple mac to see if it did the same thing and it imported the cd as 1 album with all tracks in there so I can't understand why it's separating them all.

    This happens mostly when you import a compilation or a CD that is not noted in the Gracenote Database.
    How to change back in one Album:
    Mark all titles of that album (shift or cmd click)
    Right click and choose "Get info"
    Fill in the wanted name in "Album" and "Album Artist*"
    Drag&Drop the wanted Album Art to the little window down right in that pane.
    iTunes group and sort albums by that two entry's in the info pane. If the CD is not listed in the database but the titels, iTunes split the album to fit the titles to eventually matching albums of the artists.
    Cheers - Lupunus
    * If you import a compilation, choose "various artits" for the Album Artist field.
    Message was edited by: lupunus

  • When you download iTunes material, does iTunes record the IP used where it is being downloaded to?  I am trying to track a lost/missing IPOD Touch and want to know if they have that data.

    When you download iTunes material, does iTunes record the IP used where it is being downloaded to?  I am trying to track a lost/missing IPOD Touch and want to know if they have that data.   It was left on a small street and someone has found it and has been hacking into my account by resetting my password.  They took about 41+ dollars from my account.   I am hoping the IP it was connecting with to download to it was tracked and that I can get that information to figure out where it is located.

    No. From the second link below.
    "Apple does not have a process to track or flag lost or stolen product
    - If you previously turned on the FIndMyiPod feature and location service is on, and wifi is on and connected go to iCloud, sign in, and go to FindMyiPhone. It the iPod has been restored it will never show up.
    - Report to police and change the passwords for all accounts used on the iPod.
    - Apple will not help
    Reporting a lost or stolen Apple product

  • Track bleed while recording

    I'm trying to use garageband mulitracking to record songs.  My usual method is to record guitar as first track, and vocals on the second track and build from there.  I am using headphones to listen to the guitar track and I'm singing along to the guitar.  But, when I play back the vocal track by itself, the guitar from track 1 is very audible.
    This track bleed is really bad in playback.
    Anyone know how to stop this?
    I'm using iRig as the mic input.  I use over ear headphone's for playback. I've tried noise gate, but it doesn't stop it.  I'm starting to think I'll have to record one track on my iPad and the next track on my iPhone so the tracks are seperated and can't record each other. 
    Anyone experienced this and figured out how to stop it?

    I'm using Sennheiser HD 203's. 
    I don't think it's picking up the headphone's because I use an external metranome to lay down the first track using the same headphone's, and that is never recorded. 

  • Portable Device will not playback all tracks loaded into dev

    Zen V 4GB, now has 3.8 MB of tracks in it, but when we playback in car or thru headphones, it barely plays half the contents; in fact, cannot even access the tracks to select the hidden tracks(!) for playback, because we can't find them. We know they're in there only because it - the entire list, approx 800 tracks - appears on screen, when we connect device to pc screen. Noticed, while on pc, the tracks that don't show up in portable player, are marked "protected". Is this why? How do we 'unprotect' them? We know the protected files are in tact and working well, as we tested them -but only by transferring them into iTunes. Help!/ccreids

    Sockatume wrote:
    Sounds like the music in question has DRM on it, probably Apple's Fairplay. This locks the music to particular players, for example the PC the music was downloaded on, or a particular iPod. Unless Apple start providing support for Creative players (not going to happen) you're stuck. There are lots of tools out there to take the DRM off the files and let them play freely, but they may be illegal depending on the regulations in your location (if you're in the US, the DMCA applies and explicitly bans you from doing this).
    Our only option here appears to be: to grin and bear it. Have decided to playback/listen to the half we are able to, (fortunately we can still listen to the rest via the pc) and stay away from creative portable devices and software from now on...seems, one needs to be fairly expert at it to get it right. Thanks, Sockatume, for your explanation and help.

  • How to convert MiniDiscs into iTunes as tracks/albums?

    Hi there,
    from the earlier days of Sony's MiniDisc era I have a big collection of MiniDics around with all kinds of recordings (CD's, radio takes, interviews etc).
    I still have a MD Walkman (Sony MZ-R30) and am using a iMac 27" and a MacBookPro 17" (early 2009) as well as a iPod.
    How could I digitize those MD's into iTunes as tracks/albums with the given hardware, and which additional hardware/software is needed (if any?)
    I really hope there is a way... Thanks for any hints.
    Message was edited by: vertrider

    although a little off topic, this post by Zevoneer should point you in the right direction:
    Zevoneer wrote:
    One way is to connect your turntable (through the Tape out sockets of your amplifier) to the audio in socket of your computer and record the input. On the computer you'll need audio editing software to capture and edit the resulting long file into individual tracks that can be added to the iTunes Library. There are a number of commercial programs for this (I use Sound Studio for the Mac but there are many other programs. If want to try out the process first you could try the open source program Audacity which has Linux, Mac and Windows versions at this link: Audacity
    In addition to the software you'll need RCA to 3.5 mm audio plug cables to connect the Tape Out sockets of your amplifier to the audio inputs of your computer. There's a short guide to recording here: How to record from vinyl and cassette to a computer also from the BBC Copying Vinyl Recordings to CD
    You could also have a look at the Griffin iMic which connects to a USB port on your computer rather than audio in and comes with some software of it's own: iMic USB audio interface
    JGG

  • Integrating tracking codes into iweb.....

    I was so successful in solving a problem I was having here last night that I thought Id throw another question out that has been baffling me, not hard to do I might add, how do you integrate tracking codes at the beginning of each page so that Google analytics for example can track the traffic on your iweb sites??
    This is also a requirement if you are using some affiliate programs so it is really very important to do. Any help anyone out there can give is VERY much appreciated! This is without a doubt the best information forums I have ever read!!....Thanks again in advance for any help on this subject!!...Matt
    http://www.rdeal4u.net

    Google Analytics code (ga.js) required the script to be added into your page source to precisely track the page; Step 4 in the following:
    http://www.google.com/support/analytics/bin/answer.py?answer=66983#0.1.1_step3
    adding GA code in HTML Snippet will cause the code to track widget markup pages, which will give inaccurate results.
    that at this time there is no way to enter tracking code into the pages.
    This is true, because they don't know iweb inner working bits.
    But I can prove them wrong, here is example of HTML code inserted in my page:
    http://hdl.50webs.com/Test/
    the floating nav bar and I have urchin.js loaded from google are coded directly to the page (you need to look at Safari Activity window)
    They suggested I go to www.apple.com/feedback then select the appropriate product (iweb) and seen in a message on the subject directly to the engineers.
    I suggest all that are having a problem with this go ahead and send a message to them as well, you know what they say, the squeaky wheel gets the grease!!
    It's a good idea.

  • How to merge different comp track into one comp track?

    Hi
    I use logic studio 9
    I have recorded two different comp tracks for lead singing of project
    And now I have two different tracks with a lot of takes to choose from in each one of them
    I would like to merge the two into one comp track with all the takes so it will be easier to edit
    Is there any way to do that?
    By the way, there is no reason why I made 2 tracks for the same singing part. Now it seems to be a mistake...
    Thank you very much

    Hi
    Basically, you need to unpack one (or both) sets of Take Folders, and then merge the two together:
    Working on the basic assumption (for discussion purposes) that you have two tracks, each with Take Folders on them.
    Method 1:
    Select each Take Folder on track 2 and click-hold on the arrow top right of the folder. Choose Upack to new tracks. Carefully select the new regions and drag/drop them onto the Take Folders on Track 1.
    Method 2
    Unpack ALL Take  folders on both tracks, Select all the regions and use the Region:Folder:Pack Take Folder function to re-pack into a new Take.
    CCT

  • I need to edit sections of several songs into a single track on a CD for a dressage test. Any ideas what software I need to get to achieve this?

    I need to edit sections of several songs into a single track on a CD for a dressage test. Any ideas what software I need to get to achieve this?

    Audacity 1.2.5 is an audio editor in which you can assemble and edit your recordings: it's free. I don't think it would burn CDs - you would have to reimport the finished recording into iTunes and burn from there.
    Amadeus Lite is $24.99 in the Mac App Store and is in my opinion a better product: it can burn your audio CD directly.
    If this is a one-off job you might as well use Audacity: if you are planning on doing this sort of thing at all often you would probably be better off either with Amadeus Lite or Amadeus Pro ($59.99) though this latter may well be over-specified for you as it includes multi-track editing.

  • Copy part of a take & paste it into a Master track?

    I've just started working with TAKES in Logic Pro. I would like to copy and paste a segment of one TAKE into a Master Track. I
    ve tried copy and paste but it does not work. Can anyone help me?

    Make a comp of that segment and Export it to a New Track, or Export it to Selected track (your "master" track).
    http://help.apple.com/logicpro/mac/10/#lgcpb19adfa4

Maybe you are looking for