Track AAR Usage in CDR records
Hello,
Is there any way to track in CDR records the usage of AAR. whereas I can run a report to show usage of AAR?
I recently set up a client with AAR and they are asking if there is a way to see how many calls are using AAR versus calls staying On Net within the cluster.
Thanks,
Chuck
Hello,
I have found that there is a redirect reason code field in a CDR. A value of 129 is used for AAR but I see no way to search for CDR's by redirect reason codes. Any Ideas?
Thanks,
Chuck
Similar Messages
-
Decoding/encoding CDR records
A legacy (non-Java) client/server application uses Corba CDR records to communicate over TCP sockets. No CORBA, IIOP or RMI involved, just CDR chosen as record format a long time ago. Now I would like to write a new Java client without changing the server. Is there an easy way to decode/encode a CDR formatted stream associated with a TCP socket? (I looked at the org.omg.CORBA.* packages but all I found was a rather bewildering multitude of abstract interfaces, all pointing the way to ORB country :-) )
TIA / KaarelExcerpts from ART user guide
A single call can result in the generation of several CDRs and CMRs as Cisco CallManager tracks the progress of the call through each part of the call: sending digits, receiving digits, hold, transfer, engaging a transcoder for conferencing, disengaging the transcoder, and so on.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_user_guide_chapter09186a00800c26eb.html
Regards,
Anup -
I have run to a memory limitation problem with my MIDP 1 application. So I'm trying to track memory usage. However I found out that WTK memory monitor gives me different results then Runtime memory functions (by calling Runtime.getRuntime().freeMemory()). In particular, Runtime.freeMemory shows less available heap dynamic memory than WTK memory monitor.
How can I then find out what is taking up the memory space that WTK memory monitor hides from me?
Also calling Runtime.freeMemory at the very begining at the start of my application shows me that there is roughly 90KBytes of heap memory in use. What is taking up this space?
Thanks for any hints!
Hynek CihlarOf course I did that. I wouldn't have gotten correct results with Runtime.freeMemory if I hadn't done that.
But thanks for the reply ;-). -
Is there a way to track Admin usage of ANM
Is there a way to track Admin usage of ANM (application network manager)? We have a few servers running the ANM application. Each ANM server points to/manages ACE blades (in the datacenter where the server resides). I would like to understand how much the ANM gui is used for each of the servers. I have looked through the GUI for some sort of report but wasn't able to find one. Cisco ACS has the "Adminstration Audit" report which shows all admin activity of the application per admin user (per ACS server). Is there an equivalent report for ANM?
In addtion I would like to know how much of the ACE config activity is spawned via CLI versus the ANM gui.
thanks in advance,
BBJust click on:
https://me.com/find/
and enter your ID. When it locates your iPod, it will allow you to turn on an alarm signal on your iPod which should let you find it. -
i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ? or can you run both versions on OS10.9.5 ?
Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern -
i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ?
thanks,Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern -
Third party solution for CDR records
Just wondering if anyone is using third party software/solutions for reading their CDR records from CUCM and use them to generate general reports for clients
ThanksHi,
don't forget for 2Ring CALL ACCOUNTING (http://www.2ring.com/ca).
It's really powerfull reporting.
Regards,
Martin -
Possible for Solution Manger to track Transaction usage?
Dear Experts,
I want to track the usage of SAP transactions by the users in some systems over 1 year period. Based on some online reading, I can see the 2 options:
1. Via SM19 Security Audit
2. Via STAD (short term only)
However, with all the system monitoring features brought in by Solution Manager, is there a way to use Solution Manager to serve the same purpose?
Thanks & Regards,
Li BinWhilst not specific to solman, wouldn't ST03/ ST03N be a better alternative and increase the retention period from 3 months to 13 or or so?
-
Ive downloaded aops that I've ised but deleted. Is Apple able to track the usage of that apo that has been deleted?
Usage data of individual apps is not regularly sent to Apple and you can simply opt out of sending any diagnostic or crash data. And a deleted app certainly cannot send usage data as it is not available on the device to be used, nor can an absent app crash and generate a log report.
-
Is there an app to track internet usage of other apps?
I know you can check your overall usage from your phone. But is there an app which tracks how much I use on specific apps, GPS, Safari, Youtube etc.?
There are some apps in the app store that track data usage, but I don't believe they can track by app, only whether it's cellular data or WiFi. But do a search anyway.
-
CDR Records for Voicemail.
A manager is requesting a report that I am unsure how to gather the CDR data. She wants to know how many calls going to a perticular extension are being forwarded to voicemial becuase they are unanswered.
I am familiar with creating reports that include incoming/outgoing/date/time/duration. I am unsure about how to gather the voicemail CDR variable. If anyone has any tips please post and thank you in advance.This report gives the percentage of erroneous CDR records for the total CDR records processed, the number of CDR records processed, and the number of erroneous CDR records. The report also gives the division of the erroneous CDR records into different error conditions along with the descriptions for the same.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/art/rel_notes/ART111RN.html#wp1024578 -
I have a m-audio producer usb microphone and since the update on Dec. 22, 2013 Logic hasn't been allowing me to record with it. Logic is reading the microphone as the input but the audio tracks don't have the record enable button and won't let me select an input for the audio track on the inspector panel. What are some possible solutions.
Certain M-Audio USB devices (along with some other USB2 class compliant devices that don't use drivers) no longer work with Logic Pro X 10.0.5
At this time it is unknown as to why this has happened. Nor is it known if Apple will need to fix it or if it is up to the Developers of said USB2 devices to remedy the problem.
In the mean time, assuming you made/could make backups prior to updating to 10.0.5.... the solution is to roll back to LPX 10.0.4... -
Hi! I have my Lync 2013 up and running and making calls to PSTN. I can also generate Monitoring Reports thru my report server:
http://SQLSERVER.CCOMPANY.local/ReportServer_LYNC2013/Pages/ReportViewer.aspx?/LyncServerReports/Reports%20Home%20Page. I need to generate pure CDR records for voice. This is mainly for call accounting purpose. Can any one suggest me what
to do? Thanks!
AlbertFor monitor Call Accounting, you can refer below link
http://weakestlync.com/2013/07/11/lync-2013-cdr-report-recharge-call-costs/
http://www.isi-info.com/partners/technology-partners/microsoft-lync/microsoft-lync-cdr-collection-method
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
'MAX CDR records" parameter in CCM version 6
Hello Everyone,
Where can I find the 'MAX CDR records" in CCM version 6? and what is the appropriate value to be set? Should it be left to default value?
Thank you very much in advance.You may find it in the car:tbl_system_preferences table. I would leave it as default.
admin:run sql select * from car:tbl_system_preferences
param_name param_value
========================= ========================================
MIN_DATE 01/01/1970
MAX_DATE 01/01/1970
CDR_MIN_DATE 01/01/1970
CDR_MAX_DATE 01/01/1970
MAX_CDR_NUMBER 2000000
MAX_ERROR_RECORD_ID 1
COMPANY_NAME
TOLL_FREE 1800,1855,1866,1877,1888
CHARGELIMIT 200.00
GOOD 20.00
POOR 30.00
DEFAULT_CAR_USER _unspecifieduser
LOADER_STATUS 1
CONTINUOUS_LOADING_24_7 1
LOAD_CDR_ONLY 1
MANUAL_PURGE_STATUS 0
LOADER_SCHEDULE_BACKUP DailyCdrLoad,L,1440,-1,00:00:00,0,300,30
PURGE_LOW_WATER_MARK 80
PURGE_HIGH_WATER_MARK 90
MIN_CAR_DATABASE_AGE 2
MAX_CAR_DATABASE_AGE 60
LAST_PROCESSING_DIRECTORY
LAST_PROCESSING_FILE
LAST_PROCESSING_DATA_ROW
UPDATE_STATISTICS_DATE 05/14/2010,0
LOADER_BATCH 600,600,2500,3000
INSTALLATION_DATE 2/22/2010
Michael
http://htluo.blogspot.com -
Tracking internet usage-Flash AS3
I am facing a problem how to track data usage (i.e download & upload rate) as well as to keep track of total size of downloaded content right from the establishment of net connection.Clearly explaining we have developed an application where we want to display internet usage..It would be great if someone would help in this issue....
Thanks a ton! Yeah, I didn't know about any of this until I had reason for legitimate concern. People should be aware of what's available. Someone intent on tracking you won't mind paying bluecava to do it for them...
I'll definitely be updating my browser as well. However, Lawrence, I did find during my research that bluecava DOES NOT operate based on cookies. It uses your IP address to consistently track patterns of behavior, even
within multiple devices of one household, so that deterring the tracking is not as simple as turning off cookies to a site. (See screenshot below from bluecava.com)
If you go to the bluecava site's privacy policy, you can actually opt-out, however, blogs have criticized bluecava for not explaining exactly what happens when a user opts-out. It may be beyond our control...
Maybe you are looking for
-
I have a manager program which launch several subVI's. I need to know when the user clicks over some of them and the identification (task name) of this task.
-
Problem in selecting different drives while DB installation in Cluster.
Hello, We are installing ECC 6.0 (AS ABAP), MS SQL 2005, Windows 2003 SR2, MSCS Cluster (One cluster, two nodes, Active/Passive) Directory Structure Drive / Cls Group / Used for C: Local Disk D: Local Disk E: (SAN) SAPDBGRP MSSQL F: (SAN) SAP PRD
-
My Nokia 2220 slide phone is full of photos and I dont know how to get them onto my computer. I dont seem to have a usb cable with it and I dont know how to do it with bluetooth. Any ideas please?
-
I am trying to restrict access to a course page by password protecting it. I have went into the edit course page and added in custom permission added download to USHistory@urn:mace:..... Ok now i tried to go into the transfer script and add the follo
-
IMac Won't Boot - Won't Repair - Even after Erase and Install
One day my iMac acts weird. Apps bounce but don't open. I restart. I get greyscreen and spinning gear for 1.5 hours. Uh-oh. Disk Utility run from OS X disk: cannot repair - "Invalid Node Structure" and "Invalid Key Length" - multiple instances. So I