Track AP OU information in GL

Hello all,
Is it possible to transfer OU name from AP to GL reference field by using SLA.
Please advise me to track that.
Thanks and Regards,
Muthu

Dear Muthu
In 11i you can handle it by writing custom code to store the OU in attribute
The attribute when transferred to gl will get imprted and canbe enabled in frontend DFF.
I hope same applies for R12.
Thanks
Mav..
Edited by: MAveri((k on Jan 17, 2013 11:22 PM

Similar Messages

I am having trouble editing track names and information in my Itunes library. Help center says click on selected track, click on file, click on get info, make changes, and press save. When I get to get info, it won't let me change anything. Help??

How do I edit track names and information in my I-tunes library? I followed the Help Center instructions, but it will not let me change anything. Can someone tell me what I'm doing wrong?

Those symptoms usually indicate a permissions problem. See Repair security permissions for iTunes for Windows for advice.
tt2

Where is the total tracks and size information in itunes when I select multiple items?

In older versions of iTunes, when I was creating a playlist for burning to a cd, I was able to see the number of tracks selected and the total size. Is this information still available somewhere?

Don,
Yes, it is in the Status Bar at the bottom of the playlist or library. It shows song count, time, and total file size.
If you do not see the Status Bar, enable it by using the command View > Show Status Bar, or the shortcut CTRL+/.

Status and Tracking and Additonal Information

I am trying to change the Additional Information text available in Detail Page of Planning in Status and Tracking. By default I see the text available under UPS_START_RUNDE description.
I tried to create custom text based on documentation available for Maintaining Text with Additional Information, but with no success. Also documentation does not specify it needs to be assigned based on reason code in table UPS_CUSTTEXT. So not sure how to change this default text.
Any ideas?
Thanks,
Sachin

I could able to resolve this issue myself, I missed assigning my newly created text objcet in STS configuration setting: Determine Attributes in Planning Session -> Text Element (assigned by own text object created)
Thanks,
Sachin

How to track hardware purchase information

What is the best way to (and under what tab) hardware purchase into and tie it to the assest? I need to keep track of purchase dates, PO numbers etc.
I am interested in hearing how others do this with ZCM.

mrhic,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Add file to library. Track names added to iTunes (10.5), but Album information missing

I moved my music folders on my PC, then deleted all the songs from iTunes. Before I did that my library was in perfect shape. When I "File>Add Folder to Library" all the tracks came in, however, for any tracks whose titles begin with track numbers, iTunes doesn't add album information. See tracks with pre-pended numbers in this screenshot. No album information!
The album folders in Windows are still intact, and Explorer listings of the folders show the album names as well. So windows knows the names of the albums. iTunes isn't finding them. See below.
Why isn't iTunes reading the album names. My library is now a mess! Now I've got thousands of tracks without album information. I can't do all of them manually. Any ideas?
Thanks so much!

My script picks up the information in the path the file is stored at, which generally yields Album Artist, Album, Track Number & Track Name. My own personal file name convention sets the filename to ## <Name> - <Artist> when Artist != Album Artist and my script can read that data back again. In your case we really want to get down to the reason why iTunes isn't reading the tag that is there, and eveidently readable by Windows Explorer.
Here's a thought... Backup one of the files that includes something visibly different in the contributing artists field. Right click on the file in iTunes and select Convert ID3 Tags... > None. Now try playing the file in question. Does the extra data appear? If not give the same process at least one more go.
As I mentioned earlier the ID3 spec allows for multiple tags to be attached to a single file, e.g. both V2 and V1 for backwards compatability or even multiple tags of the same version but in different languages. What isn't obvious is what rules applications are supposed to use to give preference from one to the other. I'm struggling to find a tag editor that is aware of this issue though there are some that can display V1 & V2 tags and even copy data from one to the other. I don't offhand have a definite recommedation however.
tt2

How to get Track information in Itunes 12 for windows 8.1

I just installed Itunes on my Asus. I am running Windows 8.1 . Some of my library which was already loaded in my Windows Media Player was brought into Itunes. It did not have track information because when I ripped it, I was working without an internet connection. The only reason I download Itunes was because the Windows Media Player doesn't use Gracenote. But when I went to get track info on the unidentified music, I went to the upper left hand corner, pulled down the menu, clicked on Get Info and having selected multiple tracks clicked "OK to edit multiple tracks" however nothing happened. These came from CD's I purchased. Don't tell me to re-load them. Again, I only came back to Itunes for track labels so if Apple is refusing to provide the information (because they think I will buy the music from their store), I would rather not use it. Please advise.

iTunes can only fetch the information from Gracenote if it ripped the tracks. The information about the details of the ripped CD isn't encoded with the tracks themselves. You may find MediaMonkey's auto tag from web feature useful if you have filled in the artist and album fields, otherwise see Picard Tagger. iTunes doesn't detect changes made externally however I have a script called UpdateTagInfo which can get it to read the details. Note iTunes works best with MP3 files that have a single ID3v2.3 tag so check the preferences of any software you use to manipulate tags.
tt2

Please add track number information to Walkman app

Dear Sony software programmers,
If possible please add the track number information to your Walkman app. As shown in red color on the screenshots below.

Since there could be a spatial problem with playlists containing more than 99 songs (not enough space left to the artist name in the track list), this information would be shown only with playlists containing fewer than 99 songs.

How can I change the order of tracks in iTunes?

When I changed the information of certain tracks such as the track title, album name etc. on some of my books on audio (because the information did not import with the audio, except to name them "track 1", "track 2" etc. or I changed the genre or whatever) the order of the tracks were changed in the iTunes lirary and subsequently on the iPod as well. Now of cource the chapters of the books play in an obscure order. Not good for audio books! I tried to "drag and drop" the tracks in the desired order, but that does not seem to work. Next I cleared them from iTunes altogether and sent them to the recycle bin and then restored them. Before I put them back into iTunes (when they were still just a file in a folder and not associated with any particular player) I even alphabetized the titles beginning with "1 of 5", "2 of 5" etc. but now the volumes of books are in different orders. As an example, in the "Left Behind" series by LaHaye and Jenkins now the book Apollyon plays first instead of it's correct order in the series which would be fifth. There must be a simple way to change the order of the way a book in a series of books or tracks of a book plays within iTunes without creating a seperate playlist for every book or series of books this happens to but I'll be darned if I can figure it out. Can someone please help me?
Intel 3.4 Ghz. with ht technology Windows XP Pro

No, iTunes does not put these in order when the top "Album" or "Name" tabs are clicked.
I tried that first of all, but failed to mention it in my original message. I appologize.
For instance, there are twelve books in the left behind series and each book (exept for two of them) has 5 tracks each, the two exceptions have four tracks each.
Using "get Info" and clicking the "Info" tab, all tracks of all books are labeled "Left Behind Series" in the field titled "Album".
On the right side of the dialoge box all tracks associated with the first book are labeled 1 of 12, second book, 2 of 12 and so on in the two boxes marked "Disc Number".
In the two boxes marked "Track Number" each track is labeled 1,2,3,4, or 5 of 5 for the corresponding track.
In the "Name" field for each track I use, for Example, Volume 2, Tribulation Force: Part 1 of 5.
The fourth book in the series is called "Soul Harvest" and is recorded on five rather lengthy tracks. The information for the third track of this book is labeled as follows:
Track Number: 3 of 5
Disc Number: 4 of 12
Name: Volume 4, Soul Harvest: Part 3 of 5
Artist: Tim LaHaye and Jerry B. Jenkins
Album: Left Behind Series
I am using the latest version of iTunes, Ver:6.0.4.2, for Windows xp. I am resonabaly adept at moving around in the program and was certain that by changing the information as I did, I would not only make the information easier to see and use on my iPod but that the books would finaly play in order as they never have been in proper order before.
For the life of me I can not seem to figure this one out and find myself spending far too much time on this.
Intel 3.4 Ghz. Windows XP Pro

How and why did iOS7 obtain geographic location information on my photos?

I have always kept location services turned off for the iPhone camera. Now, after the iOS7 update, all my photos on my iPad and some on my iPhone are organized into collections by year and include specific geographic location. That's information that I expressly didn't want collected and which should not have been embedded in the photos. What is the point of turning off location services if Apple will let it track/record that information anyway in the camera/photos app, if not others?

Hi,
Either turn Off iCloud on all the devices or restrict what it sync in System Preferences > iCloud (Or Internet Accounts)
9:20 pm Sunday; January 26, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to track the login user session in webdynpro

Hi all,
        I have a new requirement as Explained below
User will login from portal with login username and password.
I want to retive that information.
How to keep track of that information in webdynpro
Thanks & Regards
Padma N

Hi Padma,
First you need to add the security.jar file by following the given steps
Right Click on Project-Propertyjava Build PathLibrariesWDRuntime
Com.sap.security_2.0.0
public void LoginUser( )
    //@@begin LoginUser()
     String LogonID;
       try{
          // create an user object from the current user
          IWDClientUser wdUser=WDClientUser.getCurrentUser();
          IUser user=wdUser.getSAPUser();
          //LogonID=user.getUniqueName();
          wdComponentAPI.getMessageManager().reportSuccess(user.getFirstName()" "user.getLastName().toUpperCase());
          //wdComponentAPI.getMessageManager().reportSuccess(LogonID.toUpperCase());
          wdComponentAPI.getMessageManager().reportSuccess("Logon User ID : "+wdUser.getClientUserID().toUpperCase());
       }catch(Exception e){
          e.printStackTrace();
    //@@end
Thanks
Anup

Need help identifying controller information in hyperdraw

Hello,
Sorry if this is a dumb questions, but I'm in the middle of a project and need help ASAP. In one of my tracks (Real Guitar) there is some form of controller information present at the start of the track and I have no clue what it is! Is there a preference/key command that shows all data in hyperdraw, and then lets you select it (similar to the way the matrix editor works if you double click in the background, and then click on a specific note?)
Thanks in advance for any help you can provide!

Jonathan,
I use the method that Jim suggested. I have the "H" key programmed for autodefine. (I've also got another two keys programmed to simply turn hyperdraw on and off for the selected region(s)). Autodefine is very cool. If there are, say, 4 different controllers in the track, hitting H the first time will show you the lowest-numbered controller; hit it again and it shows you the next higher number controller, and so on. The controller number is displayed in the lower LH area of the hyperdraw display for each region.
If a track contains controller information for multiple channels, you'll see two numeric values in the lower LH corner -- the controller number and MIDI channel for that controller, separated by a comma.

No track/artist names or artwork after transfering from CD-R

Hi, when I first got my Ipod I was using a PC that I no longer have access to. I purchased and downloaded a number of albums and songs to my Itunes account. I have since set up Itunes on my own PC and wished to retrieve the songs I had previously downloaded. I did burn these songs to 7 CD-R's and thought it would be simple enough to transfer like normal purchased CD's. Now when I see them in my Library the albums and tracks have no information ie. track or artist names or artwork. Is there anyway to transfer or retrieve this information, without having to input it yourself, the problem being I can't even tell what songs are which as they just show up as track 1, track 2 ect. and there are about 7 track 1's ect. Listening to them doesn't help either as some where DJ mixed albums.
Thanks for your time and help.
Windows XP
Windows XP

You have to manually enter in the info. Once done you need to burn them to a DATA CD so this doesn't happen again. More on backing up can be found here http://www.apple.com/support/itunes/musicstore/backup/

What is Value added project stock and how can we track it.

Hi all,
There is one query in PS.
Please guide me about Value added project stock and how can we track it.
any information regarding this will be highly appreciated
Thanks & Regards
Shiv

Thanks Thorsten for reply.
Can you please provide the liink or any document you have.It wil be usefull to me
shiv

Can't save the configuration of an existing track

Hi,
i have created a track before define a product,sc... and it OK. i know it's wrong step, so after defined a product,sc and etc follow the NWDI Configuration document, i try to delete(modified to save) the existing track,The following error message is displayed:
Unexpected error; inform your system administrator: <null>
I got a solution in SAP notes as following:
The following error message is displayed when you save the configuration of an existing track:
Unexpected error;inform your system administrator: For input string: " "
Other terms
Data conversion, NWDI, CMS, Change Management Service
Reason and Prerequisites
" " default values for new fields in CMS were inadvertently delivered for new fields in CMS.
Solution
Execute the following SQL statements on the database of your J2EE application server:
UPDATE cms_cdevconf SET DTCVERSION = null WHERE DTCVERSION = ' '
UPDATE cms_cdevconf SET DTCPATH = null WHERE DTCPATH = ' '
The problem has only occurred previously on ORACLE.
I executed the sql sentence through VA, but it's not work.
Any input is thoroughly appreciated.
With Regards,
Lin

Someone?
Any help is appreciation...
Regards, Lin
Edited by: BingLin Zhong on Sep 2, 2008 4:46 AM

Track AP OU information in GL

Similar Messages

Maybe you are looking for