Track automation not in sync with playback

As of today any track automation that I manipulate is out of sync with the track by a beat. So if I adjust low frequency cut to jump from 20Hz to 1kHz at measure 64 1 1 1, when I playback it will make that adjustment at measure 63 4 1 1 instead, despite me looking at the line that's jumped from 20Hz to 1kHz on 64 1 1 1. Am I going crazy?
This doesn't happen to any PREVIOUS track automation, but only new track automation. And it's always a beat early compared to what I assign to it. Also, this is not specific to a certain project, but happens to every project. In other words, I can't make any music really past notes and beat assignments.
Does anyone have any idea what this means?
I don't know if this helps, but here's the current configurations on the Automation menu:
Move automation with regions: never
snap offset: -5 ticks
ramp time: 200 ms
'Write' mode changes to: Touch
Write automatino for (everything is checked off except "solo")
Automation Quick Assic: [X] off

Hi,
Have you add plugins like Adaptive limiter and/or phase linear Eq on Master Out 1-2?
If you add plugin that require Delay conpensation on the Master 1-2.
Also the meter will be delayed...... try to add 5 or more instances of Adaptive Limiter on the master after automation is done...
Maybe this should be related with Graphic delay that is not f compensate in logic 8, I'm not sure but when I add Plugins such as UAD for mastering reason I can see very large difference (not in sync with audio monitoring) on Meters viewing and all pre-recorded automation will be not in sync.
But I'm not sure if this issue is related with only certain project... maybe you have plugin that add latency on Aux or Master out in those projects!
check it.
Thanks
G
g

Similar Messages

  • Audio SFX not in sync with input string playback

    The audio 'key clicking' sound that occurs during playback as an input string is animated on the screen is not in sync with the characters... Its about .5 seconds late.
    Is there a way to adjust this?
    Thanks,
    Peter

    While the posted solution to my sync issue could very well correct my problem, the poster presumes I am computer literate, which I am not. lol
    could the solution provider please explain the solution as is it were being given to a 6 year old? Although most 6 year old's are possibly more computer literate than I. lol
    Thank you for your time.
    I will be checking back for any response.

  • Spl in sync with playback??

    Hi guys,
    howcome my spl is not in sync with the playback. The playback is ways behind.
    PDC is "all".
    Eddie

    I believe I'm having the same problem, i.e the playhead is out of sync with the audio during playback. It always seems to be about 2 beats ahead of the audio which make's it hard to judge exactly where to make a cut when editing.
    I am not 100% sure whether it has something to do with the plugin delay compensation because the playhead does not start moving exactly when I press play. But having read this thread it makes me wonder if some of the plugins I'm running has anything to do with it. I use T-Racks 3 quite a lot on the output channel and on sub-mix busses. The weird thing is that if there was a problem with plugin delay compensation working with third party plugins you would think that the delay would be audible in the audio. Instead all tracks of audio sound perfectly in sync and the only the playhead seems to be out of sync.
    Any advice you may have would be greatly appreciated.

  • Logic GUI not in sync with audio

    A freshly-installed Logic 8 on a clean Mac Pro 2.26 (x8) results in badly synched graphics.
    The meters in all of my plug-ins do not sync up with the audio -- doesn't matter which. More specifically, the graphics are coming before the corresponding audio.
    This occurs no matter what the latency sample value is set at -- 128 or 1024.
    This is definitely a Logic problem, not a plug-in problem, because when I duplicate the settings in GarageBand, the graphics are in sync. Even a basic one audio track with a 2-bar drum loop isn't synched.
    Any suggestions?

    Todd Schnitzer wrote:
    The sync is messed up no matter how many plug-ins are running, UAD or otherwise.
    I tried restarting, quitting and starting again, different sessions, etc, to no avail. Hopefully, Logic 8.0.3 (or 8.1) will address this and other issues (64-bit, multi-core usage, etc).
    if you have uad plugin on the master or in the AuX the GUI if the track will not in sync.. but the meter of the master out is the only one in sync
    This is the same on any system!
    Is not related with mac pro 2.26 x8!
    G

  • Nokia 6131 video not in sync with sound

    After a year of working just fine, my Nokia 6131 video picture is not in sync with the sound when I play it back on the phone or when I download it to my pc to view.
    At first the problem was only when I played it back on the phone, but was fine on the pc. Now it's distorted on both.
    The video picture seems to be on fast forward but the sound runs smoothly. My video's are always less than five mins long.
    Please can anyone help me to resolve this frustrating problem?
    Katie Girl
    Solved!
    Go to Solution.

    hey KatieGirl, i too had the same problem with my old nokia 6288. have you tried turning off your phone and restarting it, this usually helps in alleviating choppy video playback. if this is still resulting in **bleep** playback on your phone and pc, then i would suggest searching for a software update via Nokia Software Updater, if there is no update, then i would suggest re-flashing your phone with the same version firmware again. p.s. remember to backup all your data before flashing your phone with firmware.
    failing all this, then i would suggest taking your phone to your nearest Nokia Care Centre or authorised service repair centre, as there may be a fault with your phone hardware itself.
    hope this helps.

  • SPL not in sync with overview

    Still in logic 8.0.2.
    When using specific plug-ins like limiter, TC linearphase eq et cetera, the timeline spl is not in sync with the waveform overview during playback.
    Is this normal or expected behaviour?
    Anything I can change? Its hard to cut regions, when you do not see what you hear.
    Yes, I could bypass the plugs, but thats stupid, isn't it? And yes, delay compensation is set to all. Wish that was fixed.
    Eddie

    seems to be a " specific limiter, TC liearphase eq et cetera" problem...
    you need to manually compensate or.. wait for TC update.
    ... anyway . try to delete preferences of Logic and specific TC plugs
    G

  • Down loaded tracks can't be synced with ipod

    I have a pc, running windows XP, home edition (2002) (Ignore what it says below, I'm not currently running a powerbook).
    My ipod is 5th generation.
    The version of itunes is 7.6.1
    The problem I have is this:
    I have down-loaded some backing tracks from various web sites (but not the itunes store).
    The down-loaded (MP3) tracks appear in itunes and can be played in itunes, but have a small exclamation mark beside them.
    I can not move these tracks to any of the playlists and the tracks can not be synced to my ipod.
    I can not find whereabouts on my computer the files are and have no idea how to go about finding them.
    Is there anything I can do about this?
    Any suggestions would be greatly appreciated.
    Malcolm

    Why did you start a new account?
    Copy everything from your backup copy of your computer to your new hard drive.
    Ipod will sync to one itunes library at a time.  Syncing to another will erase the current content from the ipod.

  • Business partner creation - Not in sync with customer numbers -

    Hi All
    I am trying to do the BP conversion in collections management.
    The customer number range for account group ZXXX  is (80000 to 89999) and the external number range flag is not selected.
    I have created created a number range Y2 through BUCF, with numbers from (80000 to 89999), I did not choose external flag, thinking it should be same as customer number range. I have created a BP group ZXXX and assigned this number range Y2.
    Later when I did the BP conversion through MDS_LOAD_COCKPIT, I observed that the BPs are not in sync with the customer numbers.
    So my question, should I have choosen external number range flag in BUCF, even though its not selected in the customer number range? Has this caused the issue?
    Please help me understand this and rectify this issue.
    thanks in advance.
    Krishna

    Hi Christobal,
    Thank you so much for you response. 
    As suggested, I have checked BP number range as external. Later when I ran MDS_LOAD_COCKPIT, I get the below messages
    Grouping ZXXX has external number assignment, enter a number
    Partner data processed with key PartnerGUID 4E1BD7375F080AE0E10080000A5B030E
    Grouping ZXXX has external number assignment, enter a number
    So is there any other setting which I might be missing?
    Please advise.
    Thanks
    Krishna

  • I am using windows 7 and itunes 11.7 my i phone 5s is not getting synced with my laptop it keeps showing backing up  please help i need to put music in my phone?

    i am using windows 7 and itunes 11.7 my i phone 5s is not getting synced with my laptop it keeps showing backing up  please help i need to put music ?

    Hi,
    Have you managed to solve this problem? if yes, please highlight how you solved it...i'm facing same problem with my new Iphone 5S but udner Windows, thanks.

  • Have tried to install icloud 4.0 for windows and again it does not allow syncing with outlook 2013 calendar and contact using windows 8.1 and IOS 8.02 (unexpected error)? I thought itunes 12.0 and icloud 4.0 would solve issue but still same result.

    I have tried to install icloud 4.0 for windows and again is does not allow syncing with outlook 2013 calendar and contact, using windows 8.1 and IOS 8.02 (get - unexpected error)?

    Having same issues. had been syncing every few days with outlook 2007 contacts and calendar but since updated to 4.0.2 and latest itunes I get an error that it is unable to sync. I can't seem to find any solution.

  • Audio not in sync with video in imovie 08 version 7.1.1

    I am importing many Hi 8 tapes using a Sony video walkman GV-D800 thru a firewire 400 port on my Macbook pro, when I play it back in imovie the audio/voice is not in sync with the lip movement of the people in the video, there is a 1-3 second delay. If I play back the same video I captured using QuickTime Player there are no sync problems? I am new at this so what am I doing wrong?
    BTW. I also imported HDV using my HDV camera and there are no sync problems at all. Any suggestions are appreciated.

    Welcome to the  Discussion Forums.
    Is this delay present on your exports or is it merely when previewing in imovie.

  • After ATV2 5.0 update Netflix audio is not in sync with video

    As the title says, on ATV2 after the 5.0 update, Netflix audio is not in sync with video.
    Anyone else seeing this?

    I spoke tooo soon.
    Netflix audio is not in sync with video today as well. Any movie, it happens to all.

  • Audio Skimming not in sync with actual Audio

    Hi Guys,
    Since about a week or so, my Audio Skimming seems a little off. When turned on, and actually skimming, it let's me hear something that's at least 4 seconds off. I have no idea how to fix this, so all help is needed
    Thank you so much,
    Nikkie

    I spoke tooo soon.
    Netflix audio is not in sync with video today as well. Any movie, it happens to all.

  • Flashvideo stuttering, sound not in sync with video

    Can't help it: flashvideos are stuttering and the sound is not in sync with the video as the video/picture always is like a second late to the sound.
    Tried Firefox, Safari, Google Chrome, even with older flashplayer-versions than 11.5.502.110 as it is now, cleared chache, enabled and disabled hardware acceleration, tested different cache memory size (flashplayer internal settings), with or without camera and microphone allowance, every time I get the same results in a choppy / stuttering video and no sync in picture / sound.
    My System is as followed:
    MacBook Pro early 2008
    MacBookPro4,1
    Intel Core 2 Duo
    2,5 GHz
    L2-Cache:    6 MB
    RAM:    4 GB
    Bus:    800 MHz
    with a GeForce 8600M GT
    PCIe-Bus
    VRAM 512 MB
    Internet-connection via cable at least with 5 Mbit/sec up to mostly around 20 Mbit/sec and a 802.11n WLAN (tried LAN cable too, same effect)
    My OSX is Snow Leopard 10.6.8 and I want to stick with that one, I keep the browsers and the flashplugin always up to date and I am not using a lot of background programs when watching, just one firewall and the usual system processes as I can see in the activity monitor, not much of percentage in processor usage, maybe 2 to 5 in percent all together, talking only of the background usage.
    The core / processor usage, when a flashmovie is running, is around 80 to 90 percent,
    there is an amount of 45 or so GB harddrive space empty and
    somewhat of 1,8 GB of RAM not in use.
    The connection-quality as shown in, say the "nfl game pass" window is very good up to max.
    Sometimes, when the internet isn't that fast and the connection drops, the picture gets worse and the sound too, but that occurs not very often, maybe once a day and mostly when starting a video. After 10 seconds or so the quality of the picture and sound is high like brilliant HD, cannot complain about that, but the stuttering and out of sync sound remains.
    I  watch the flash videos at internal mac-book-pro monitor 1440x900 fullscreen, sometimes not fullscreen,
    tried an external LCD Sony Bravia Full HD Monitor  via DVI to HDMI adapter too
    and I am getting  always, with any kind of configuration, the same results in stuttering video with sound out of sync.
    Did already read faq's and forums and it seems that this is an issue for a long time with very different computer-setups and browsers in various versions of the flash-player. Couldn't find anything in accordance, like same graphic cards or same internetconnections, browsers or else, yet, so it comes down to the flash player.
    The issue with the stuttering video and no sync in sound and video occurs at any time of the day with different streams, live, archived - I also tried changing  the mac-system-flashplayer settings in different combinations with no change at all: stuttering video, no sync sound.
    If there is any information else that you need, please let me know,
    I hope you can help as this stuttering and async is getting quite annoying by now...
    greez anyway, out of vienna, austria
    thanx,
    manfred

    Hi Manfred,
    When you have the high cpu, is hardware acceleration enabled?  You mentioned this occurs with all releases that you've tested, does this include 10.3 on Firefox?
    Chris

  • Model session not in sync with Http Session

    Hi All,
    I have an application developed in JDev 11.1.1.4 and we are not using ADF Security for login.
    The problem occurring is randomly some of the LOV on my home page are getting null (having no data). These LOVs are populated using the values passed as bind parameter from the login values (basically HTTP session values at web layer). So i added a method in all the task flow to set the session value at the model layer (default method) . Also on each call to the Am Impl call i am setting the value in the HTTP session and then invoking the method, but some how what happens is the Model level session value is not in sync with HTTP session and the list gets empty.
    Any inputs what i can do to get out of this prblm ?
    thnk

    In this case you need to overwrite the activateState/passivateState method of your am and store/reads the values from the xml structure you get as parameters to this methods.
    For more detailed information check the docs http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcstatemgmt.htm#sm0495
    By the way, this is nothing you need to open an SR on as it's working as designed.
    Timo

Maybe you are looking for