Track Ball Mouse?

Used FCP for 9 Years.  I love my Kensington Expert Trackball Mouse.
Doesn't work with Lion.
Any recommendations as to a trackball that will?  And yes, I've been researching the net.  Just thought I'd poll the FCP community:)
Thank you in advance,
Shelley

Hello Matt,
I used to use one of these...
Mouse
Quick and comfortable to use.
Regards.
Ian.
NB - This part of the forums is for the older G4 " flat panel " Macs. If you have a 24" Intel Mac, then here...
http://discussions.apple.com/category.jspa?categoryID=189
Is your relevant section of these forums.

Similar Messages

  • Track ball mouse buttons and Logitech driver not fully working on Core Duo

    I have a Ligitech cordless optical TrackMan ball bluetooth ball mouse which works for me. Unfortunately, I could not map the buttons properly (the back button kept doing an F9 function rather than 'back' in Safari). The driver in System Preferences produced a warning message something like 'this won't work on a core duo imac'. Logitech did not seem to have any updates. I hunted around some alternative software and just wanted to recommend www.usboverdrive.com to anyone who has the same problem. All buttons can be easily mapped - you press the button to identify which one it is and then can change what it does.
    2GHz iMacCD 20" 2Gb RAM   Mac OS X (10.4.6)  

    Funny, not on their site!
    But! You can get it here:
    http://www.macupdate.com/info.php/id/8154
    Again, I don't have a trackball, but give this a shot. It is the "Control Center" software, and from their site the trackball is the save version (1.62) as the mouse/keyboard.
    Good luck!
    Steve
    20" iMac Intel 2gb RAM; Mac Mini; 14" iBook G4; iPod 3G 20gb (3rd gen)   Mac OS X (10.4.6)  

  • In need of a Mighty Mouse Track Ball

    Something small and hard, fell in the mouse track ball area and while i was pressing it (upside down) on a piece of paper to clean it, that little hard piece of dust, carved the surface of my track ball making it unable to scroll without jumping around!
    So im now in the need of purchasing a new ball and replacing it! Does the ball as a part exist? Because i can't find anything on ebay! Any help?

    What exactly am i looking for in the "about this Mac" specs? I mean i have found the mouses info, i think this is it:
    but what numbers must be used in order to locate it from mouseballz website?

  • Mighty Mouse Tracking Ball

    The tracking ball on my Mighty Mouse works side-to-side and up, but not down. It feels as though there's some debris in the way preventing it from letting me scroll down.
    Is there a way to clean it with breaking it?
    Can I take it apart safely?
    Any reponses would be greatly appreciated.
    Thanks,
    Stephen
    17" iMac IDC iSight   Mac OS X (10.4.5)  

    Stephen,
    This has a tendency to happen a lot---for some reason it attracts dirt like anything.
    Just simply get a damp, lint-free fabric and rub it vigorously on the scroll button, making sure you let it roll freely as you do so (to get the entire ball on all sides)---right side up first, so you can see the smudge building up on the sides where the button meets the rest of the casing. You will see some particles get trapped in this a lot. Scrape off all the gook from there...
    Let it rest for a minute or two, to completely dry it from the dampness caused by the fabric, and then turn it upside down while rolling the button to free any other remaining residue...
    Here's the link fron Apple's Support pages:
    http://docs.info.apple.com/article.html?artnum=302417
    Hope that helps

  • Mouse Track Ball only working in one direction

    Hello,
    My Mighty Mouse is 3 months old and now the track ball is only working in one dircetion.
    When I move the ball forward I hear the distinct sound and the scroll bar on e.g. Safari moves, but when I reverse there is no movement on the screen.
    I don't hear the same sound as when I move the track ball forward.
    I have tried to reboot but no improvement.
    Have someone seen teh same issue? Is the solution to simply replace the mouse?
    Thanks / Christer

    Use the instructions in this article to clean the mouse.
    (15069)

  • Mighty Mouse track ball button

    I have been using Snow Leopard for a while and one of the things that I like the most is that I can choose what I want to see in my screen when I move my cursor to the lower right or left corner.
    I have it set up as to SHOW ALL WINDOWS if I move my cursor to the lower right corner, well after I moved to LION that is no loger an option, instead of showing all windows open all it shows are the open windows open of the same application only, How can I set it up the way it was before, is there like a script or something.
    also can it be set up so when I click the tracking ball on my Might Mouse to show ALL windows and not just the program windows?

    I've read all the posting about this..in recent months I've been cleaning the track ball 6,7,8,9....times every day. I had planned to buy a wireless Mighty Mouse but not now, it'd be cheaper to sit in front of my Mac bashing my testicles with a mallet for the same effect. Apple, this is an utter design disaster. Like Joachim says, why not a mouse we can open and clean easily, or a larger, more robust track ball mechanism? I'm off to but a mouse by anyone but Apple...
    G5 i-Mac   Mac OS X (10.4.9)  

  • Mighty Mouse Track Ball

    Does any one else have issues with the mighty mouse track ball?? My does not work half the time. When it is working it will only work in one direction half of that time.
    Does anyone know of ways to clean it?? Or keep this from happening?
    Cameron
    MBP 15.4"   Mac OS X (10.4.8)  

    I've read all the posting about this..in recent months I've been cleaning the track ball 6,7,8,9....times every day. I had planned to buy a wireless Mighty Mouse but not now, it'd be cheaper to sit in front of my Mac bashing my testicles with a mallet for the same effect. Apple, this is an utter design disaster. Like Joachim says, why not a mouse we can open and clean easily, or a larger, more robust track ball mechanism? I'm off to but a mouse by anyone but Apple...
    G5 i-Mac   Mac OS X (10.4.9)  

  • HT2845 why doesn't my mighty mouse track ball scroll up or down vertically?

    why doesn't my mighty mouse track ball scroll up or down vertically?

    Hi:
    New ones are not that expensive, but I would try running it up and down (vigorously) on microfiber cloth or a towel or something.
    If that does not fix it...yes I would buy a new one.  I like wireless ones anyway
    Barry

  • Mouse and track ball working together in leopard

    i just upgraded to a new 8 core from a dual g5 tiger. 1 thing i was able to do with out loading the logitech drivers... which when reading forums ,is nothing but trouble.with tiger g5 i was able to connect my mouse for right hand and logitech marble track ball for left. then in preferences i could set system preferences primary mouse button to right so ican use my thumb left hand. now with new computer and mouse it doesn't allow that. any ideas how to make it work how i want it
    thanks

    HI,
    Check the Logitech site to see if you can update a driver for the mouse. Read the information carefully to make sure this is the software you need. It supports Macintosh OS X OS 10.3.9, 10.4.x, 10.5.x
    http://www.logitech.com/index.cfm/494/3129&cl=us,en
    As with any software update, repair disk permissions after you finish installing the software.
    Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select FirstAid, then click: Repair Disk Permissions. Quit DU when it's finished and reboot.
    Carolyn

  • Mouse tracking ball gets clogged easily

    Has anyone else had this problem?
    I am on my second USB mouse with the little tracking ball in the middle. The same thing is happening that happened to the last one. The tracking ball will stop working in 1 direction or the other. It takes blowing air in there & vigorous running the ball up & down to eventually free it up. Each time it becomes harder to bring it back to health.
    It appears to get gunked up in there. This used to happen w/ the old fashioned roller-ball mouse too, but you could pop the cap, remove the ball, and clean out the rollers.
    Is there any solution to the new generation of mouse?
    thanks
    DS

    Is this the Mighty Mouse?
    [Discussions on working of Mighty Mouse|http://www.macosxhints.com/article.php?story=20070103082828118]
    [How to clean your Mighty Mouse|http://support.apple.com/kb/HT1537?viewlocale=en_US]
    [Discussion on cleaning a Mighty Mouse|http://discussions.apple.com/thread.jspa?threadID=1883567]
    [Using a Mighty Mouse|http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh2244.html]

  • Just Upgraded to Lion X 10.7 and my mouse (tracker ball) has changed its direction. how to reset to previous?

    need to reverse the tracker ball direction, seems to have reversed after upgrade..

    Same with my trackpad here, I went to
    System preferences
    Trackpad
    there is an option to change the direction of scrolling in the "scolling and zooming" section.
    I bet it is similar to the mouse prefs.
    Best regards
    Kevin

  • Left Serial Track ball button doesn't aleways work in Firefox and T-bird, but works well in IE8 and other programs on this computer

    Sys=WinXP SP3, ASUS MB, Athelon X2 6000 CPU, 4 (3) gb mem.
    Intac Systems mouse trak track ball. This device works fine
    with all the other programs on my computer. In T-bird or Firefox
    the left mouse button often doesn't work for minutes at a time
    then works for a few seconds, then stops again. The right button
    works all the time, even when the left has stopped, as does the
    ball to move the cursor. Have reloaded the Microsoft serial
    mouse drivers and tested the mouse and all is OK.

    The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
    Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
    If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
    "Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
    You need to remove the checkmark on "Always use private browsing mode" to leave Private Browsing mode or chose the "Remember History" setting.
    *https://support.mozilla.org/kb/Private+Browsing

  • Track ball scrolls in opposite direction after installing Lion

    After upgrading to Lion OS, my track ball on my mouse moves the screen in the opposite direction.  What up?

    In System Preferences - Mouse
    DESELECT - Scroll direction natural!!!

  • Keyboard with touch pad/track ball?

    Hi all,
    I am thinking about getting a Mac mini for my bedroom. I need a wireless keyboard with touch pad or trackball. Any suggestions?
    Rgds TIA!
    //Per

    Welcome to the Apple Discussions.
    The iPad does not work with track ball or touch pads or mice because there is no cursor to move around. Your finger tip is the cursor. Only thing that appears on the screen is a place marker where text will begin to be entered when you are in a text entry mode...but that is not movable by mouse or other pointing device.
    If the keyboard meets the Bluetooth profile Apple has published for the iPad, that part should work.

  • Stuck Track Ball

    I've had the "stuck track ball" problem many times and have tried everything I've found on this site. Some works for awhile, some don't. This is the best fix I've tried so far. When my track ball would not scroll down, I unplugged the mouse from my keyboard and scrubbed the little ball on top (track ball) back and forth and around for several minutes with an alcohol swab pad. Works fine now. We'll see how long it lasts.  wayne e

    You need to replace the track ball.
    There are 2-3 ways to get these. I'd Suggest Ebay
    For a quicker route go Craigslist
    But On Ebay You can type in...
    Blackberry 8100 trackball
    EDIT::: You can get them in multiple colors, My pearl is Lime Green, with Green ball, Black ring, And the "Silver ring" is green metallic around the ball it's self...
    For FASTEST shipping if you want them cheap. These links...
    And they have them from 2 Dollars buy it now,  to 8 dollars
    If your in UK
    http://cgi.ebay.com/BLACKBERRY-TRACKBALL-BALL-FOR-PEARL-8100-8110-8120-8130_W0QQitemZ300353545707QQc...
    If your in USA
    http://cgi.ebay.com/Trackball-Purple-BLACKBERRY-8100-8110-8120-8130-8800_W0QQitemZ220493893664QQcmdZ...

Maybe you are looking for

  • SAP B1 9.0 Client PC Installation Problem

    Hi Experts                I am installing sap B1 9.0 client PL07 that time my Database are not showing after installation then i try to download install sql server native client.while installing native client am getting the below error               

  • Toshiba 39L4353RB 7.1.56.36.01.1 TimeShift and Rec problems.

    Hello. I have Toshiba 39L4353RB with latest aviable f/w 7.1.56.36.01.1 for this model. There are not options for TimeShift and Recording in Menu. I have selected country Germany, DVB-C with CAM-module (digital TV). I have insert USB HDD, but there wa

  • Export is too slow using @sid

    Experts please tell why it is taking too much time using @sid? I have read this in orafaq http://www.orafaq.com/forum/t/71979/2/ Is this database on the same server as you are doing the export? Exporting using a TNS entry is very slow, even if it is

  • Duplicate missing songs

    Hi, I recently had to move my entire music library from one partition to another, and made a bit of a mess of working with iTunes. Now iTunes has two copies of every song in the library, every other one being marked with a question mark because (obvi

  • Cluster setup problem

              If I have two boxes, with static IP: 192.168.21.5 (box A) and .6 (box B). How would           I setup the cluster?           Specifically, if I make admin Admin at 192.168.21.5:7001, Managed-1 at 192.168.21.5:7101           and Managed-2 at