Track breaking-up about 3-mins in

Hi ... just downloaded my 950th track from iTunes... was enjoying it until it started to breakup about 3-mins in... played it several times ... breakup always in the same place... seem to have a corrupted file... my first one!
Seems to be no simple way of emailing Apple for them to check the file and either replace the one I have with a complete file or credit me.
Any ideas?
Thanks

Yes I have this drive - albeit the 320GB model, it is very good, if a tad noisy when working but as it's not constantly running its ok. Ideal for Time machine.
However I actually ended up opening the chassis and sticking in a 'spare' 750GB Sata disk simply because the cost of the disk is pretty cheap now. It's very simple to do, unscrew a few screws, unplug some pins, then swap the drive out, the insides of these lacie drives are not very complicated at all.
so I have a drive twice the size of my internal disk, and i just leave it on with Time machine running. Fantastic
P

Similar Messages

LMS 4.1 Freezes after about 10 min of being Idle

We have LMS 4.1 installed. After about 10 min of being idle, the browser becomes frozen, eventually crashing it. We applied this fix for lagging hoping it would fix the issue, however it has not.
=-=-=-=-
We have been tracking a problem internally where the Getting Started page hangs on login. The problem is with changes to Cisco.com access. We are actively working to get those fixed, but if this is what you're seeing the workaround is as follows:
a. Open the properties file name “gs.properties” under the path NMSROOT/MDC/tomcat/webapps/cwlms/WEB-INF/classes/com/cisco/nm/gs/ui
b. Update the field IS_DEFAULT_PAGE as “false”
c. Clear the browser cache and login-in(Daemon restart not required)
=-=-=-=-=-
Any ideas?
Thanks,
-Nick

We have LMS 4.1 installed. After about 10 min of being idle, the browser becomes frozen, eventually crashing it. We applied this fix for lagging hoping it would fix the issue, however it has not.
=-=-=-=-
We have been tracking a problem internally where the Getting Started page hangs on login. The problem is with changes to Cisco.com access. We are actively working to get those fixed, but if this is what you're seeing the workaround is as follows:
a. Open the properties file name “gs.properties” under the path NMSROOT/MDC/tomcat/webapps/cwlms/WEB-INF/classes/com/cisco/nm/gs/ui
b. Update the field IS_DEFAULT_PAGE as “false”
c. Clear the browser cache and login-in(Daemon restart not required)
=-=-=-=-=-
Any ideas?
Thanks,
-Nick

HT1725 I have a few songs that will only play for about a min the it will stop playing how can i get the songs back to a full song

I have a few songs that will only play for about a min the it will stop playing how can i get the songs back to a full song

Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the incomplete tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link.

I started downloading Mountain Lion about 30 mins ago and I see no progress. I'm downloading it through my wifi. Is this normal? Should I go to a hard line in instead? Thanks......

I started downloading Mountain Lion about 30 mins ago and I see no progress. I'm downloading it through my wifi. Is this normal? Should I go to a hard line in instead? Thanks......

You're not using the fast tracks midi out you are using the analog/digital audio.
But go to garageband preferences > Audio Midi and I'm guessing you have the wrong output set. Choose the output that you are using, I'm going to guess built in.
And make sure the fast track is set for audio input.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.

This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

Whenever I try to use my macbook, it will work for about 10 min. then the screen will go black, the computer will not respond to my commands, and I have to restart it. Can anyone tell me what's going on, and how to fix it? Thank you!!!

Hello everyone, like most people on this site, I am having difficulties understanding and fixing my Macbook Pro. About a month ago my computer screen went black, the computer was unresponsive, and it started making a beeping noise. I restarted the computer, and it seemed to have fixed itself. 6 days ago, I put my laptop into it's case with some papers, went home (about 30 min. after putting laptop into case), and opened my bag. My computer's fans were on, the computer was really hot, and when I opened the computer, the screen was black and unresponsive. I turned it off, let it cool down, turned it back on, started to stream a video on Hulu, and about ten minutes after, the screen went black again and the computer was unresponsive. Now everytime I turn it on after about ten to fifteen minutes the screen will go black, the computer will become unresponsive, and I have to shut it off. The weird thing though is that everytime I restart my computer, when I reopen my account, my computer acts as if nothing has happened, and everything I had opened or unsaved is still there without autosave saving the documents.The screen also goes black and the computer becomes unresposive when I move the computer around. I get a lot of pop-up ads and other crap on my computer when I am on the internet. I don't know if one of those pop-up websites might have given me a virus or may be the cause of this problem. I don't now what is wrong with my computer or how to fix it, but if anyone has any advice, I WOULD GREATLY APPRECIATE IT!!!!!!! Thank you very much!!!
-- Sincerely, A very confused, scared, and hopless Macbok Owner

To get rid of "pop-up ads and other crap on my computer when I am on the internet", click on Safari in the Menu bar, and select Preferences. Next select Extensions. Delete all of them. Restart Safari.
The first step in addressing the black screen is an SMC reset.
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Excerpt from
http://support.apple.com/kb/ht39

Wireless B Broadband Router (BEFW11S4) connects for only about 5 mins at a time

I have Wireless B Broadband Router (BEFW11S4). Worked fine for about 2 years. I've had a HP Pavilion for about a year now using the wireless and also have a desktop I use on it (wired). About a month ago the speed seemed to be lagging a little and the router was never secured with a password, so I changed that and added a password. Ever since then the laptop will not stay connected for more than about 5 mins. I have gone back and removed the password protect feature, but still have the problem. It has a problem connecting to the router. The signal bars always seem to be full, but still can't connect. I've tryed reseting the router, unpluging everything, etc and can't get it to have a steady connection like before. Sometimes I can connect to the internet even when it says "Not connected" in the wireless network connection 2 screen. I've tried to search and find a similar problem, but was surprised to not be able to find one. Any insight will help.
Thanks,
Lman

Thanks for the suggestions Wizzard. Although I did not know what all that stuff does, it didn't seem to help. I didn't not upgrade the firmware because there didn't seem to be any upgrades since 2003, before I bought it. Any other suggestions from anybody? Could anybody make an educated guess to whether it's the router or the laptop?
Thanks,
Lman

My radio cuts off after about 5 min. It didn't do this until the last update. How do I fix this?

After the most recent upgrade on my IPhone I can no longer keep listening to my radio. It cuts off after about 5 min. I used to also be able to lock my screen and have my radio or music keep playing but now it shuts off when locking my phone. How do I fix this - it's very annoying to be running and have to stop every 5 min. to turn the **** radio back on.

Push the headphone jack in farther, the plasic on the headsit jack must be flush with the body of the Nano.

In Car iPod Classic 160 cutting out after about 2 mins

I have a Kenwood KDC6537u car headunit with the KCA iP200 cable and an iPod classic 160gb. Everything seems fine and runs well for about 2 mins when I get a 'iPod Err' display. The display on the iPod goes back from the 'Kenwood' screen to the normal iPod screen. Switching the unit off and on restarts the iPod only to stop again after another two minutes or so. Is there something that I need to reset on the iPod to stop this. I've upgraded the headunit to the latest available from kenwood so I'm now stuck.
Any help would be appreciated.

Further to the description I have done two journeys where this didn't happen and all was well. This makes for even more frustration. Kenwood can't offer anything other than to reset the iPod which didn't work. They also suggest there may be a fault in part of the 'chain' of bits but I don't have the capability to check - I only have one of each bit so can't compare.
Anyone have any suggestions? Please?

Iso 5 the app store is working very slow, takes about 2 min to search....

iso 5 the app store is working very slow, takes about 2 min to search....

iso 5 the app store is working very slow, takes about 2 min to search....

HT1555 i just got a new apple tv but for some reason the remote only worked for about a min. and than it wount work at all. i tried to pair and unpair but nathing works but when i press a button the light on the apple tv turns off. what should i do?

i just got a new apple tv but for some reason the remote only worked for about a min. and than it wount work at all. i tried to pair and unpair but nathing works but when i press a button the light on the apple tv turns off. what should i do?

Have you held the menu and left arrow together for 6 secs ? (I think you have from what you say).
Also try unpowering and restarting AppleTV.
AC

Mobile account login about 10 mins on mac os x server

Hi there!
I successfully created mobile user accounts. When I log-in from my power book the mobile user is created and synched. If I try to log-in on my G5 workstation where mac os x server is installed the log-in procedure takes about 10 mins. Logging in with local accounts is as fast as one would expect.
A look into system.log shows that there are problems to mount the users mount point. Please see:
Oct 8 22:40:25 sebastian kernel[0]: AFP_VFS afpfs_mount: /Volumes/Users, pid 1540
Oct 8 22:41:28 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: doing reconnect on /Volumes/Users
Oct 8 22:41:28 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/Users
Oct 8 22:41:28 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Opening session /Volumes/Users
Oct 8 22:41:28 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Logging in with uam 10 /Volumes/Users
Oct 8 22:42:28 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Log in failed 32 /Volumes/Users
Oct 8 22:42:34 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: posting to KEA retry for /Volumes/Users delayCnt 6
Oct 8 22:42:34 sebastian KernelEventAgent[37]: tid 00000000 received VQ_NOTRESP event (1)
Oct 8 22:42:34 sebastian KernelEventAgent[37]: tid 00000000 type 'afpfs', mounted on '/Volumes/Users', from 'afp_005AoG3asllS001Eic06SdO0-1.2c00000b', not responding
Oct 8 22:42:34 sebastian KernelEventAgent[37]: tid 00000000 found 1 filesystem(s) with problem(s)
Oct 8 22:42:38 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/Users
Oct 8 22:42:38 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Opening session /Volumes/Users
Oct 8 22:42:38 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Logging in with uam 10 /Volumes/Users
Oct 8 22:43:38 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Log in failed 32 /Volumes/Users
Oct 8 22:43:48 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/Users
Oct 8 22:43:48 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Opening session /Volumes/Users
Oct 8 22:43:48 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Logging in with uam 10 /Volumes/Users
Oct 8 22:44:49 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Log in failed 32 /Volumes/Users
Oct 8 22:44:59 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/Users
Oct 8 22:44:59 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Opening session /Volumes/Users
Oct 8 22:44:59 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Logging in with uam 10 /Volumes/Users
Oct 8 22:45:59 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Log in failed 32 /Volumes/Users
Oct 8 22:46:09 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/Users
Oct 8 22:46:09 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Opening session /Volumes/Users
Oct 8 22:46:09 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Logging in with uam 10 /Volumes/Users
Oct 8 22:47:09 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Log in failed 32 /Volumes/Users
Oct 8 22:47:19 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/Users
Oct 8 22:47:19 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Opening session /Volumes/Users
Oct 8 22:47:19 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Logging in with uam 10 /Volumes/Users
Oct 8 22:48:20 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Log in failed 32 /Volumes/Users
Oct 8 22:48:30 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/Users
Oct 8 22:48:30 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Opening session /Volumes/Users
Oct 8 22:48:30 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Logging in with uam 10 /Volumes/Users
Oct 8 22:49:30 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Log in failed 32 /Volumes/Users
Oct 8 22:49:40 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/Users
Oct 8 22:49:40 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Opening session /Volumes/Users
Oct 8 22:49:40 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Logging in with uam 10 /Volumes/Users
Oct 8 22:50:40 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Log in failed 32 /Volumes/Users
Oct 8 22:50:50 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/Users
Oct 8 22:50:50 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Opening session /Volumes/Users
Oct 8 22:50:50 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Logging in with uam 10 /Volumes/Users
Oct 8 22:51:50 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Log in failed 32 /Volumes/Users
Oct 8 22:51:50 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: max reconnect time reached 622 > 600 /Volumes/Users
Oct 8 22:51:50 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: posting to KEA to unmount /Volumes/Users
Oct 8 22:51:50 sebastian KernelEventAgent[37]: tid 00000000 received VQ_DEAD event (32)
Oct 8 22:51:50 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: doing reconnect on /Volumes/Users
Oct 8 22:51:50 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/Users
Oct 8 22:51:50 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Opening session /Volumes/Users
Oct 8 22:51:50 sebastian KernelEventAgent[37]: tid 00000000 type 'afpfs', mounted on '/Volumes/Users', from 'afp_005AoG3asllS001Eic06SdO0-1.2c00000b', dead
Oct 8 22:51:50 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Logging in with uam 10 /Volumes/Users
Oct 8 22:51:50 sebastian KernelEventAgent[37]: tid 00000000 found 1 filesystem(s) with problem(s)
Oct 8 22:52:51 sebastian kernel[0]: AFP_VFS afpfs_Reconnect: Log in failed 32 /Volumes/Users
Oct 8 22:52:51 sebastian kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Users, flags 524288, pid 37
Did I miss something? Why can't I log-in my mobile user on the server machine?
Thanx in advance
Gerhard

Looks like Apple has decided that access to the root user is not a needed thing for most users. I called Apple and asked about this issue as I had just had it occur - and I was logged into terminal BEFORE update to 10.6.8 as root - after I was unable to do so -
Apple walked me thought this -
System prefs ---->Accounts -----> unlock ------>
Click on Network Account Server "Join" ----->
Choose "Open Directory Utility" -------> This opens directory utility window -----> Unlock lock at bottom.
Go to "Edit" Menu and choose "Enable Root user" ------> it will ask for password. ( only 1st time after 10.6.8 update)
Now you can log into the root user in your terminal.
You can disable the root user - this will prevent you from logging in as root in terminal.
I am not sure - but is there a security RISK here? The option to re-set the root password via the above method ( as an admin user) - but with out re-booting the machine and using the install DVD?
My 2 cents.

Why it takes long time (about 10 Min) to map the network drivers in windows 8.1?

Why it takes long time (about 10 Min) to map the network drivers in windows 8.1? I don’t have this problem with any other operating systems (Ex: Windows 7 or XP)

Can you perform a refresh ?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Adobe reader waits about 5 mins and still fail to accept pdef drop from 3rd party applications

The Adobe Reader Version 7.0 on Linux SLED 10, waits about 5 mins and still fail to accept the drop of pdf file from another application.
The drag source create a tmp file in the /tmp directory and drag target type is text_uri_list. with XDND as protocols.
Would it be possible to find out what is required to accept drop for the Adobe Reader ? and why does it takes about 5 mins to return drag fininsh events ?
Thanks

Hello,
Unfortunately, the 7.0 Reader doesn't accept drag-drop on the application window. However Reader 7.0.8 (and the upcoming Reader 8.1) does.
Regards,
Neha

I am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.

am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.

The optical drive has probably failed. It's a fairly common thing with these slim SuperDrives. Does it read any discs you put into it? You can try resetting the SMC and pram but I'll be surprised if it helps.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on
Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Track breaking-up about 3-mins in

Similar Messages

Maybe you are looking for