Track for QA08

Hello All,
I have an requirement where I need to submit a report that represents the track for the Inspection type activation Deactivation for the material. Now the Issue is if the Inspection type is Activated / Deactivated through MM02, it reflects in the Change Documents for the Material. But If it is done by QA08 it doesn't reflect anywhere.
So pls guide me how can I get the change history for Inspection type maintenance executed through QA08.
-- Jimmy

Hey Sujit,
Thanks for your very helpful answer. It is wroking, and I beg your pardon I didn't included it in my last post, that it is missed (to click on the "Create Change Documents".
So kindly guide what sould be done in that case? If the QA08 is executed without activating "Create Change Documents"
-- Jimmy

Similar Messages

  • Creation Of Track For ESS/MSS

    Hi,
       Could anybody send me the steps in brief or any document which gives step by step procude exactly what needs to be done in NWDI to create a track for ESS/MSS.
    I have gone thru some of the sdn posts but i didnt get exactly what steps need to be done....like apart from importing predefined SCA's.
    Please help me out...
    Regards
    Sireesha.

    Hi Sreesha,
    Process: Creating Track for ESS/MSS Application.
    1) open the NWDI URL.
    2)click on "Change Management Service" link and login.
    3)After logging you will be in "Transport Studio" link. Shift to "Landscape Configurator" link click on that, there you will see tract related page.
    4)In the middle of the page there are differnet options(buttons) like Change,New,Save,Save As,e.t.c..
    5)Click on New button then you will get new track related fields. After giving required details bottom of that there are some more options(buttons) like ADD Sc,Delete,e.t.c.., clcik on ADD Sc and add the SCs related to ESS/MSS and click on SAVE button which is present on top of window.
    6)With these steps required track will be created...
    Any queries revert back.....
    Regards,
    Anil.

  • Can't get rid of the "your document is being tracked for reviews" message

    I used Adobe Professional for the first time to conduct reviews on PDFs. I used the "Send for review by email" option. Now I am done with the review, have incorporated the comments, have compiled FrameMaker files, and produced a new PDF. But when I open the final PDF, I still get the message that you are opening a document that is being tracked for review. How do I make sure the message goes away?

    Basically, while I was trying to figure out how I was going to send my forms to people, I tested the "Send for review by email" function, just as the OP did.
    Pretty sure that's what triggered my form to be stuck in this "Marked for Review" mode.
    Appreciate any help y'all can give me.
    Again, I attached a screen shot of the pop-up in question

  • Create a new track for SAP E-Commerce 5.0

    Hi all,
    I have all the SCA files with me for the E-Commerce application.
    I want to create a track so that I can access it in my NWDS
    Can anyone help me in creating a track for SAP E-Commerce.
    How to go about it please let me know
    SCA Files
    1)CUSTCRMPRJ
    2)SHRWEB
    3)SHRJAV
    4)SHRAPP
    5)CRMWEB
    6)CRMJAV
    7)CRMAPP
    8)STRUTS
    9)TEALEAF
    10)JTECHS
    11)JBUILD
    Regards
    JM

    Anil,
    I would highly appreciate if I can have that from you.. https://forums.sdn.sap.com/profile.jspa?userID=1532856
    Thanks Anil!
    Kiran

  • Backing Tracks for Tenor Saxophone

    Dear friends from Apple Communities.
    I am looking for Backing Tracks of songs for Tenor Saxophone.
    Yesterday, I was watching some tenor saxophone soloist in the YouTube, and after a presentation from one saxophonist, at the end of the song, he had wrote that the Backing Track was purchased from "iTunes", but didn't gave more information about.
    I tried to find Backing Tracks in iTunes, but I didn't have success; nothing have appeared.
    Then, if someone knows anything about my search, please, let me know, once I need to have these backing tracks for play my tenor sax along with these songs. I will appreciate some comments about.
    Thanks a lot for your help.
    Best regards,
    Kyoto2014

    Hello ed2345,
    Thanks for the good tip.
    Indeed the site it's very nice about karaoke, but as the Tenor Saxophone plays with a particular key in the instrument (Bb), any song needs to be played with this same key. For example, the piano, guitar, etc. plays in the key C, the Alto Saxophone plays in the key Eb, and so on.
    Then, there are many beautiful songs in the site that you gave me, but unfortunately none specific to tenor sax.
    Maybe, using a good time from me, I could open some song that I have liked, and I should try to play along with this song, in order to see if the backing track would has the same key as my tenor sax.
    However, I  really have appreciated your concern and your time to write to me giving me a way to find some backing track for my sax.
    Again thanks so much for your help. The World forsooth, needs people like you and the friend "hhgttg27" that always giving a time for help others.
    Cheers,
    Kyoto

  • Set default audio track for playback in Source monitor

    So I'm an editor that is somewhat new to the profession and I am working on a project right now with close to 100 video clips in my project. Most of the clips have their audio recorded to track 2 but when I load the clips into the source window to find the footage asked for in my script there is no audio playback.
    They play fine in the program monitor once placed in a timeline, because I have all the audio tracks are turned on until I do my mastering at the end of the project. To get audio playback in the source monitor I have to change the view option to audio waveform which shows a blank screen because there is no audio on track. I then go to the drop-down menu just below the video display and select track 2 at which point the audio waveform shows up and plays back fine. This isn't too arduous a process and isn't a great burden but it slows my workflow down considerably as I have to repeat the process for each new clip I load into the source monitor.
    My question then is if there is anywhere in Premiere that I can set which audio track is the default audio playback track for clips loaded in the source monitor. I work on a lot of similar projects like this for the same client and they don't have the most rigorous standards for their shooters. This problem has come up before and will most assuredly arise again in the future so any tips/advice on how to fix this on my end would be much appreciated.
    Thanks!

    I'm not really sure.I don't do any shooting for the client and in fact don't have any contact with the shooters, we just do the post. They use a number of different freelance videographers all of whom have different equipment and procedures when it comes to formatting, orginization, etc.

  • Problem with CMS track for a SCA

    Hi,
    in my NWDI, I have a track which contains a SCA (for SAP_ESS),
    can i chekin that track in my local NWDS, modify that DC (the webDynpro project), and directly deploy it from my NWDS studio on a sap j2ee server, instead of cheking out and importing that track in subsequest runtime-systems, (i am trying to do so, because i have a problem getting that sca deployed in the subsequest runtime systems)
    please help

    You will have to create a track for the ESS content in NWDI and then check out the DC which you are looking to modify. You can always test the application directly by deploying it from NWDS - Check in is not necessary if it doesnt have any dependencies on other DC's / objects.
    Thanks,
    GLM

  • Why can't I enable an audio track for recording? (It won't let me)

    I want to record VO but PP won't let me...
    On Mac OS X 10.10 Yosemite in System Preferences:
    • Sound Input is set to C-Media USB Headphone Set (an Alesis usb mic...works fine for VO in Final Cut Pro 7)
    • Output is set to Headphone port
    In Premiere Pro CC Audio Hardware Preferences:
    • ASIO Hardware is set to "System Default Input/Output"
    • I have also tried "C-Media USB Headphone Set but this, too, doesn't work
    • With "System Default I/O" selected, Output Mapping is set to "Adobe Desktop Audio" (only choice), and shows:
         • "Built-in Output: Headphones 1
         • "Built-in Output: Headphones 2
         • "C-Media USB Headphone Set: Front Left
         • "C-Media USB Headphone Set: Front Right
    all four of these have a couple of square icons to the right.
    In order to record VO, I first need to "enable track for recording" in the Audio Track Mixer. There are no in or out points set in my timeline and the tracks are not locked or solo'd or anything. So why can't I select the audio track I want to use to record VO? I click it but there is no response. I just want to know why this software is not doing what it's designed to do.

    is I learn still around -? That was VERY HANDY!

  • Assembly failed while configuring track for ECOM

    Hello,
    I am trying to configure the track for the ECOM application. I have reached successfully upto the step of importing the SCA files on the Consolidation tab of CMS Transport Studio. Now when I try to assemble the components, I get the message "Assembly Failed" for the following components:
    sap.com_CUSTCRMPRJ
    sap.com_SAP-CRMAPP
    sap.com_SAP-CRMWEB
    sap.com_SAP-SHRWEB
    When I checked the "Details", I see the following:
    Check-assembly assembled
    Repository-export assembled
    CBS-assembly Finished with errors
    Export Assembly failed
    The log files are empty, for all the components!!
    In CBS there are totally 408 DCs in each buildspace - dev and cons. None broken.
    Any idea what the problem can be?
    Thanks and Regards,
    Reena

    ====
    o2cb_ctl: Configuration error discovered while populating cluster ocfs2. None of its nodes were considered local. A node is considered local when its node name in the configuration matches this machine's host name.
    ====
    What this says is that none of the nodes in cluster.conf match the current hostname.

  • How can I make MainStage2 use tempo tracks for older logic tracks?

    I am trying to play a recording live that is 5 years in the making. Obviously, Logic has progressed in this time. Anyway, there are tempo tracks for the songs and I can't get MainStage2 to recognize them so I have been forced to add a click track and make them part of the bounce. I might be better off with the click track method since I can push it to one stereo channel and not the other, but I was wondering if there is a way to try and get the tempo information recognized by MainStage2 (perhaps by transforming the old projects into new projects??). I would like to try for one track and compare the pros/cons of the two methods. Thanks in advance.

    Wouldn't iTunes be more appropriate for this?  There doesn't seem to be any video involved.

  • Tracks for WD par files and VC applications

    Hello Gurus,
       Could anybody please throw some light on the tracks for Webdynpro par files and visual composer applications?
    I need to know if we need separate tracks for Webdynpro par files and Visual composer applications on the NWDI. Can we use one track for the development of Webdynpro and VC applications or do we need separate tracks for these developments? What is the best practice?
    Appreciate much for your help in this regard..
    Regards,
    ~~LB

    Hi Leena,
                   In general SAP recommends to create a seperate tracks for differnet applications. based on your requirement you need to think of whether to go for single or multiple tracks.
    Regards,
    Anil.

  • Tracks for garage band

    This is my third Mac and on my other macs, GarageBand came with more tracks. I downloaded the update and it installed so now I have GarageBand '08 but I still have minimal tracks. When I check for updates to download the free tracks that are supposed to be provided it says that there are no updates. What is an easy way to get the downloadable tracks for GarageBand? (without buying a jam pack)..... Right now the drum tracks only consist of two kits and the guitar tracks only consist of one guitar track, aren't there supposed to be more? I do not know if they are already on my mac somewhere and need to be installed or what, help would be much appreciated.

    Assuming that by "tracks" you mean the loops:
    http://www.bulletsandbones.com/GB/FAQPages/NoLoops.html

  • Edit muliple tracks  for genre artist etc?

    Does anyone know a way to edit the genre title etc of multiple tracks quickly?
    Doing it one at a time is extremely tedious particularly if the changes are to lists of up to 70 tracks.
    Thanks

    Just select all the tracks you want to modify and Get Info on them. iTunes will ask if you want to modify the settings on multiple tracks; accept and you can change the info all at the same time. Of course this will only work if you want to have the appropriate info for a given field be the same for all the tracks - for instance you want them all to be the same genre, or have the same album title, etc.

  • How to use Progress Tracking for PO

    Dear SAP gurus,
    I have requirement to track the progress of goods in the PO. I recently bump into tcode EXPD and want to use this functionality.
    My detailed requirement is like this:
    a. We have status of:
        - Leaving Factory
        - Arrive Port
        - Received in Warehouse
    b. When the status is assigned, I only need to put the planned date for last status (Rec in Warehouse), and then system should be able to calculate the planned date for the preceeding 2 events.
    From the explanation in library it seems that all functionalities can be covered by EXPD. I have configured the status as events. Define status rec in warehouse as starting point for automatic schedule, and then define the schedule for all the events as backward. However when I specify the planned date for the event Rec in Warehouse, and click schedule, and i click refresh, but still nothing happen.
    I have never seen this in work before, but I assume that the system should be able to put the planned date for each event based on the date that i put as starting point.
    What do i miss in here? Or the functionality is not meant to be like that?
    Best regards,
    John

    Hi John,
    For configuring Progress Tracking you need to first make some config settings. You need to create Events; Scenarios; their inter-relationships; Profile, etc. in IMG settings under MM>Purchasing>Purchase Order-->Progress Tracking.
    Only after this, will the event get assigned to your PO for tracking purposes. Later you can use EXPD to see the progress tracking for your selected POs.
    Let me know if my inputs were of any use or you need any more inputs.
    Regards
    Rajeev

  • Setting track for a captivate course

    Does anyone know if you can set up "tracks" for a captivate course in the LMS.
    I have a course with a lesson that is only applicable to certain group of learners and we dont want the rest of the company to view that information.
    Our LMS does have the capability to set up tracks for courses created directly in the LMS system, but I originally created the course using captivate instead.
    Any advice is greatly appreciated.

    If it is critical that one role does NOT see what the other role should see (e.g. for security reasons) then you need to have three separate versions of the course and set up your LMS to determine which role the person belongs to so that the only choice they get is the one appropriate for them.  Most LMSs allow you to configure role-based learning this way.  You add people to the roles set up in the LMS and that controls the learning options they see.
    Doing what I suggested in Captivate is really just a way to have slightly personalised content for different roles inside the same project file.  But the downside is that when you get to the quiz, everyone has to do the same questions, otherwise your quiz score can never be 100%.  Then you'd need to resort to using a target for points scored instead of a percentage out of 100.

Maybe you are looking for