Track grouping and chapter creation

I have a couple of CDs where one song is slowly starting while the one before is still playing. So importing track by track would split them apart in a very ugly manner. If I group the tracks for importing I only get one track in iTunes but I can't navigate to the second or third "chapter".
Using a chapter creation tool I can edit the track afterwards, but I have to type the song title manually again.
So, is there a possibility (or maybe a third party plugin) to group songs, import them as one track and automatically create chapters with the song titles as chapter titles?
If not this would be a feature proposal to Apple for a future version of iTunes.
iMac G5 (17, 1.8GHz) Mac OS X (10.4.3)

Sorry, no answer ...

Similar Messages

Track Grouping and accurate control of track/group volumes

Hi,
Newbie to Garageband so bear with me...
Firstly, is there a way of grouping tracks together and apply effects to the group as a whole (independantly of whatever effects are applied to the tracks within that group)? and...
Secondly, is there a way of having precise control over the volume of a given track/group of tracks?
What I am trying to do is create a dance track in which there a section which you would imagine playing with a strobe light going off, ie the volume is max followed by min straight away, max,min,max,min etc., with the min parts cutting sound completely.
Thing is, all I can see in Garageband is the ability to add points to a line (creating a sawtooth look). What's more, it seems that if, using this sawtooth, a note plays when at sawtooth is at max then it doesn't cut the volume when the sawtooth is then at min.
Any suggestions?
SadieLovatt

SadieLovatt wrote:
Firstly, is there a way of grouping tracks together and apply effects to the group as a whole (independantly of whatever effects are applied to the tracks within that group)? and...
Not that I know of. However, there is a Master Track that applies effects to all tracks (i.e. all tracks grouped together on the stereo mix), but no ability to create groups of only some tracks and apply effects to them. So as far as I know, in GB, it's either 1 track or all tracks.
Secondly, is there a way of having precise control over the volume of a given track/group of tracks?
What I am trying to do is create a dance track in which there a section which you would imagine playing with a strobe light going off, ie the volume is max followed by min straight away, max,min,max,min etc., with the min parts cutting sound completely.
Thing is, all I can see in Garageband is the ability to add points to a line (creating a sawtooth look). What's more, it seems that if, using this sawtooth, a note plays when at sawtooth is at max then it doesn't cut the volume when the sawtooth is then at min.
Any suggestions?
You can mimic a square wave by adding dots and dragging a dot until it is almost directly under the other dot, and then having a dot to the right of it (still at the bottom) and adding a dot almost right above it, and then another dot to the right of it at the same volume... basically draw a square wave using dots, so the audio flashes on and off. And if you do this on the Master Track, it will apply to all tracks.
However, to make it work well, you'd want to zoom in all the way to be able to get the dots as close to vertical as possible. You do this by sliding the zoom slider on the lower left all the way to the right. If your automation track is open, you can see that little differences become big differences. Zoomed in all the way, you can make adjustments that will snap to the next one so fast, it should sound like a square wave. You can see where the threshold is... if you slide a dot directly over another one, it eats it up, but slightly to the side, it coexists. It won't be a perfect square wave, but it should be close enough to sound like one.

Setting Change Tracking Group Programmatically

Is there any sample code C# or TSQL for programmatically setting Change Tracking Group and Enable Change Tracking for Attributes?

Stephen,
So you still need assistance with this?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Creation of GL account under main group and sub a/c group

my name is swetha,
my clint is asking for creation of GL account in the following manner
under   account group a sub account group, and under sub account group a GL account .
like
account group (ex: loans)
      sub account group (ex: vehical loans)
           GL account       (ex: HDFC bank GL vehical loans)
could you please help me to configure if it is possible, if not plz suggest me the alternate options. thanks in advance.

hi Swetha,
one thing remember u can create all G/L Accounts as one Group but these sub groups are define in FSV so you can tell them first we can create on group that is loans but at the time of FSV u can define number of sub groups because gl master account groups are using for number controlling purpose only.what ever groups u are define in FSV that groups only comes at the time of reports ok.

Automate the Creation of, or Import Track Groups-Can Logic do this?

As someone contemplating jumping ship from DP after 10 years, I was wondering if Logic can automate the process of creating or adding track groups that I use regularly. For example, if I demo a song with a drum loop and then want to add live drums, I always create the same 12 tracks with the same pan, eq information when micing a drum kit. Can I create something called "drum set-up" and import it into an existing project instead of having to create (the same) 12 tracks, set all the pan info, add eqs, gates, etc...
Thanks for your expertise! Looking forward to delving into the new work environment.

I've often wished for a feature like this, but sadly Logic doesn't have it...
So what I do is have a folder on my basic template, and inside that folder are 12 tracks grouped together (so I can record enable'em in one click), with all appropriate plugins and settings ready to go.
That way all my songs are 'ready' for live drums, and by keeping them in a folder they don't take up to much space in my arrange page. I also sometimes use "Hide Tracks" to keep the drum folder out of the way until I may need it.
Other than that, you can fairly quickly create 12 new tracks with the little "+" icon in the arrange page. Then each track needs a click to load your fave channel strip preset for kick/snare/tom/overhead etc.
The only downer about that, in my mind, is that the channel strip presets don't include input settings and send/aux assignments. But at least you can drag-select all the tracks in the mixer and quickly give them all the same sends, so it's not too huge a pain.
Still, I've often wished for a "load channel strip(S)" button so I could import a dozen tracks in one go... Maybe Logic 10 will include this feature. (I've already given up wishing for stuff in 9).

QA33 - Change Output by adding Requisitioner, purchasing group and tracking

Hi All
I have a requirement for the Standard report like QA33. The requirement is that, in the output of QA33,
The Requisitioner, Purchasing group and Tracking Number should be displayed
Please give me suggestions to do this
I searched for User Exits and I found QEVA0004, QEVA0005, QEVA0006, QEVA0007, QEVA0008, QEVA0009, QEVA0010, QLCO0001, QSS10001.
In the Above which exits I can use and how to implement them
Pls reply
Thnx in Advance
Regards
P KAMAL

Rajesh,
Put a breakpoint and try to debug the report step by step.
You will findout the reason very easily.
Whenever you have a select and are trying to append into an internal table, keep checking your internal table if it is been populated with the correct records.
This way, you will findout the cause and can correct is accordingly.
Thanks,
Suresh Ganti

QA33 Change by adding Requisitioner, purchasing group and tracking number

Hi All
I have a requirement for the Standard report like QA33. The requirement is that, in the output of QA33,
The Requisitioner, Purchasing group and Tracking Number should be displayed
Please give me suggestions to do this
I searched for User Exits and I found QEVA0004, QEVA0005, QEVA0006, QEVA0007, QEVA0008, QEVA0009, QEVA0010, QLCO0001, QSS10001.
In the Above which exits I can use and how to implement them
Pls reply
Thnx in Advance
Regards
P KAMAL

GSK,
But for stock components you don't need a Purch.Group...
Have a look at the following user-exits:
COZF0001: Change purchase req. for externally processed operation
COZF0002: Change purchase req. for externally procured component
PeteA

Assigning learners to Learner Group and creation of Learner Group.

Hi All,
Are there any standard ways to create Learner Groups from R12.1.3. I have tried looking for Oracle standard APIs but did not find them. Is there any other way we can create Learner group from back end. I know to create them from Application but we have to create bulk number of Learner Groups. So wanted to do them from back end.
Also we may need to assign large number of learners to learner group. Can you please explain the possible ways of doing these assignments.
Any inputs are the most awaited.
Thanks,
Abhishek.

Thanks Anders for your input. Please look into my below query also.
We are in 12.1.3. I tested creating a learner group and adding learners to it (both by organization and learner assignment).
When I try to assign a course to a Learner Group from the Application, I go to course and from "Bulk Enroll" window, I input the Learner Group to which I wanted to add the course and click on 'GO'. Now Application lists out the learners in the Learner Group. Learners in the Learner Group are not enrolled into courses unless I click the check box beside each learner and select 'Add'.
Is this the standard way of enrolling a Learner Group to the course. I am just looking for a way where I can enroll all the learners in Learner Group to a course by selecting that particular Learner Group (rather than clicking the check box beside every learner).
If I have to check against every learner to enroll them in a course, then I dont really get the point in creating Learner Groups. Please advice.
Thanks,
Abhishek

Creation of new employee groups and sub groups

Hi All,
What all the steps should I follow to create new employee groups and sub groups? and How many structures should I create for this?
Its urgent pls.......
Good replies will be rewarded!!!!
Regards,
Sita

Hi
You can create the employee groups depending up on your clients requirement, Eg: Permanent, Temporary, Seasonal, Trainee, Advisor etc
And define the employee subgroups and assign them to the employee groups Like
Enterprise structure>Definition>Human Resource Management-->Employee Groups & Employee Groups
Enterprise structure>Assignment>Human Resource Management-->Assign employee subgroup to employee group
you can create employee subgroups depending up on your requirement like asst manager, manager, GM, MD, VP ETC an assign them to the employee subgroups ok.
Ensure that certain empployee subgroups may not be assigned to employee group based on requiremen, but create all the employee sub groups which is existing in the organization.
Regards

Function Groups and Function Modules

Hi,
Can anyone give me the detail steps for creating Function Group and then from that function group creation of function module with example?
Regards,
Chandru

Hi,
Function Group creation -
       A function group is a program that contains function modules. With each R/3 system, SAP supplies more than 5,000 pre-existing function groups.
     In total, they contain more than 30,000 function modules. If the functionality you require is not already covered by these SAP-supplied function modules, you can also create your own function groups and function modules.
      We can put all the relevant function modules under one function group and all the global variables can be declared in this FG.
FG Creation:
1)     Function group can be created in SE80. There choose the 'Function Group' from the list of objects.
2)    Then give a name for ur function group (starts with Y or Z) and press ENTER.
3)   The click 'YES' in the create object dialog box and give a short desc. for this FG and save.
Function Module:
             A function module is the last of the four main ABAP/4 modularization units. It is very similar to an external subroutine in these ways:
Both exist within an external program.
Both enable parameters to be passed and returned.
Parameters can be passed by value, by value and result, or by reference.
The major differences between function modules and external subroutines are the following:
Function modules have a special screen used for defining parameters-parameters are not defined via ABAP/4 statements.
tables work areas are not shared between the function module and the calling program.
Different syntax is used to call a function module than to call a subroutine.
Leaving a function module is accomplished via the raise statement instead of check, exit, or stop.
A function module name has a practical minimum length of three characters and a maximum length of 30 characters. Customer function modules must begin with Y_ or Z_. The name of each function module is unique within the entire R/3 system.
Defining Data within a Function Module
Data definitions within function modules are similar to those of subroutines.
Within a function module, use the data statement to define local variables that are reinitialized each time the function module is called. Use the statics statement to define local variables that are allocated the first time the function module is called. The value of a static variable is remembered between calls.
Define parameters within the function module interface to create local definitions of variables that are passed into the function module and returned from it (see the next section).
You cannot use the local statement within a function module. Instead, globalized interface parameters serve the same purpose. See the following section on defining global data to learn about local and global interface parameters.
Defining the Function Module Interface
To pass parameters to a function module, you must define a function module interface. The function module interface is the description of the parameters that are passed to and received from the function module. It is also simply known as the interface. In the remainder of this chapter, I will refer to the function module interface simply as the interface.
To define parameters, you must go to one of two parameter definition screens:
1) Import/Export Parameter Interface
2) Table Parameters/Exceptions Interface
Then in the FM interface screen, give the following
1) Import parameters
2) Export parameters
3) Changing parameters
Then give
1) Define internal table parameters
2) Document exceptions
You enter the name of the parameter in the first column and the attributes of the parameter in the remaining columns. Enter one parameter per row.
Import parameters are variables or field strings that contain values passed into the function module from the calling program. These values originate outside of the function module and they are imported into it.
Export parameters are variables or field strings that contain values returned from the function module. These values originate within the function module and they are exported out of it.
Changing parameters are variables or field strings that contain values that are passed into the function module, changed by the code within the function module, and then returned. These values originate outside the function module. They are passed into it, changed, and passed back.
Table parameters are internal tables that are passed to the function module, changed within it, and returned. The internal tables must be defined in the calling program.
An exception is a name for an error that occurs within a function module. Exceptions are described in detail in the following section.
Syntax for the call function Statement
The following is the syntax for the call function statement.
call function 'F'
    [exporting   p1 = v1 ... ]
    [importing   p2 = v2 ... ]
    [changing    p3 = v3 ... ]
    [tables      p4 = it ... ]
    [exceptions x1 = n [others = n]].
where:
F is the function module name.
p1 through p4 are parameter names defined in the function module interface.
v1 through v3 are variable or field string names defined within the calling program.
it is an internal table defined within the calling program.
n is any integer literal; n cannot be a variable.
x1 is an exception name raised within the function module.
The following points apply:
All additions are optional.
call function is a single statement. Do not place periods or commas after parameters or exception names.
The function module name must be coded in uppercase. If it is coded in lowercase, the function will not be found and a short dump will result.
Use the call function statement to transfer control to a function module and specify parameters. Figure 19.9 illustrates how parameters are passed to and received from the function module.
sample FM
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
I_CALLBACK_PROGRAM                = ' '
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
IT_FIELDCAT                       =
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
TABLES
    t_outtab                          =
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Example
1 report ztx1905.
2 parameters: op1 type i default 2,   "operand 1
3              op2 type i default 3.   "operand 2
4 data rslt type p decimals 2.        "result
5
6 call function 'Z_TX_DIV'
7       exporting
8            p1      = op1
9            p2      = op2
10      importing
11           p3      = rslt.
12
13 write: / op1, '/', op2, '=', rslt.
Regards,
Shanthi.P
Reward points if useful ****
Edited by: shanthi ps on Jan 26, 2008 12:03 PM

Would Like to Get Report of Daily Emails In and Out from Members to a DL Exchange version : 2007 I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity is it possible ?

Would Like to Get Report of Daily Emails In and Out from Members to a DL
Exchange version : 2007
I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity
is it possible ?

Well, distribution groups don't really have a concept of "in" or "out". They only serve to distribute messages sent to them -- unless you're asking to know who was a member of the distribution group at the time a message was sent to the DL.
Message tracking logs hold the information you want, though. You'd have to look for EXPAND events that reference the distribution group and take the sender's e-mail address from that event. If the DL is a simple one that's not a member of any other groups
you could also look for RECEIVE events sent to the e-mail address of the group and get the sender's name from that event.
You can use Powershell extract the rows of data from the logs, but you'll have to write the code to get the data out of those rows and into a format you want. Perhaps LogParser could be useful in place of Powershell?
--- Rich Matheisen MCSE&I, Exchange MVP

Ideal way to report on Nested Groups and their Members - I can get the script to work if there's one group, but not if there is two or more

Hi All,
I like to keep track of Groups and Users added into our Domain Admins. Yes, it should always be minimal, but if I can have a daily report just to be certain, I'll sleep better.
The following works just fine if there is a single nested group. I cannot get it to work properly if there is more than one. I'm hoping you'll see what I'm missing.
Works fine:
$admins = get-adgroupmember "domain admins"
foreach($i in $admins){if($i.objectClass -eq "group"){ get-adgroupmember $i.samaccountname |foreach {New-Object PSObject -Property @{ username = $_.name;Group = $($i.name)}} | select username,group | export-csv c:\Users_and_Groups.csv -Notypeinformation}}
Does not work well. Result is that the "Group" information doesn't change to the correct group:
$myCol=@()
foreach($admin in $admins){if($admin.objectClass -eq "group"){$myCol+=$admin.samaccountname}{foreach($i in $myCol){get-adgroupmember $i | foreach {New-Object PSObject -Property @{ username = $_.name;Group = $($admin.name)}} | select username,group
| export-csv c:\Users_and_Groups.csv -Notypeinformation}}}
Here is what I have in $myCol:
PS C:\Users\Administrator> $myCol
MarketingPSO
RMSysAdmins
I tried shortening up the one-liner a bit more, but for some reason the "RMSysAdmins" is the only Group listed even though Leia and Han are in the MarketingPSO Group:
foreach($i in $myCol){get-adgroupmember $i | foreach {New-Object PSObject -Property @{ username = $_.name;Group = $($admin.name)}} | select username,group }
username
Group
Leia Organa
RMSysAdmins
Han Solo
RMSysAdmins
c3po
RMSysAdmins
Darth Vader
RMSysAdmins
Boba Fett
RMSysAdmins
Thank you very much for your time,
Mr Mister

Hi Mr Mister,
To get nested group members, this script is for your reference:
function Get-ADNestedGroupMembers {
[cmdletbinding()]
param ( [String] $Group )
Import-Module ActiveDirectory
$Members = Get-ADGroupMember -Identity $Group|sort-object objectClass -descending
$members | % {
if($_.ObjectClass -eq "group") {
Get-ADNestedGroupMembers -Group $_.samaccountname
} else {
New-Object PSObject -Property @{ username = $_.name;Group = $Group }}
Get-ADNestedGroupMembers "groupname"
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Moving multiple tracks & group hiding...

There are a lot of reviews on Logic 9, all of which focus on Flex time, but there are some simple questions that I would like to ask that I can't seem to get out of any review, perhaps someone here knows. Hardly any of the stores here have Logic 9 installed so I can't test...
1) Is it possible to move multiple tracks in arrange at the same time? I.e. shift select or lasso select 2 or more tracks and move them in arrange?
2) On the new group tracks dialog (with the list of all groups, etc.) I noticed that you can "Hide" groups. However, is there some keypress + click option that allows you to "Show" a group that you've selected? So an example would be, every track is shown, and I just want to "Show" my drum group, would I have to hide all, then find the drum group and uncheck it?
3) Is there any way to show both the L&R waveforms on a stereo audio file? Or are we still limited to the one waveform? Maybe I just don't know how to show this, it might be something simple.
4) Is there a "Jump to grid" sort of option like in cubase or PT? Basically, if you are in arrange, and you click in the bars beats area, can the current position jump to the closest grid location? I don't know how else to explain this, hopefully someone here knows what I mean.
5) The new click zones looks like what the doctor ordered, but is there a click zone at the top of the waveform to control the region volume ala Cubase/Nuendo/PH Record? I know that you can do this on the volume automation lane, or insert something to control gain pre inserts and automate that, but I just want to know if the click zones included that.

nobody has an answer to these?

Making users available for OpenSSO realm group and role assignment?? Help.

Here is the situation. We have 3 Open SSO realms set up. One we have called OpenSSO-Admin, a second called OpenSSO-Provider and a third OpenSSO-Internal. We are having issues provisioning and managing the OpenSSO-Internal OpenSSO-Provider realms, but OpenSSO-Admin seems to be fine.
Here is the behavior that is manifest.
In the 2 'broken' realms, when we create users and assign them to the appropriate Open SSO realm, they appear to be provisioned correctly in IDM as well as the realm (We have validated user creation in LDAP and everything about the user appears to be fine). When we view the groups and roles in the specific resources, we are presented with a list of users that are in Brackets and appear to be provisioned. The brackets indicate that the users are not found as available users. The bracketed users can not be unassigned, nor can any others. note, our bracketed users in the list of assigned users are created from a workflow which assigns them directly to the appropriate group and role based on their business role.
The third realm, OpenSSO-Admin works fine and we can add, and manage users in the groups and roles within the realm.
We have ruled out the workflow as a source as the problem persists when we use the tool to manage users. We can create a user from scratch and add them to the realms. In the 'Broken' relms, the users do not appear in thelist of available users to be assigned to the groups or roles. Yet in the 'good realm, everything appears fine. We can move users from one realm to another and the problem persists in the broken realms, but when a user is added to the 'good' realm, everything is fine.
I have tried reconciling and get no different results.
Question is, We have isolated that the issue seems to be in the generation / management of the left hand "Available Users" list. How and where is this generated from and how can we check/fix or regenerate this list?
Thanks.
Joe

I should clarify. We are using Sun IDM 8.1

Groups and Auxs - confused Newbie

Can someone please explain the difference between a group and a bus.
Case: I want to group my drum tracks to a group to apply automation etc. If I create the group in the mixer, select each drum track and say t's art of the groupdo I still need to apply a 'send' in each track inspector to the aux/bus of the same number as teh group?
I'm sure this is a Doh! moment for many but despite reading three manuals I can't understand the logic (no pun).
Thanks

Older versions of Logic (up to 7?) had "Bus Channels" - if you have an older project or template, you will have these objects. If you are in version 8 or 9, creating a new file from scratch which will not have these objects.
An auxiliary is a CHANNEL and a bus is a PATH.
This is the way it should have been implemented from the beginning, but it wasn't so the confusion spread. A bus is any circuit accepts input from multiple sources. Other than the channels, most everything on an analog mixer is a bus; the main stereo mix, the submasters, the auxes, the matrix, etc.
Think of a bus as a virtual wire. It can be tapped into for a variety of things, from aux sources to compressor side chains. Once you put a signal on a bus in Logic (usually through an aux send) that signal can be used in multiple ways, by multiple objects.
The auxiliaries can be used for effects or for subgrouping. They are channels with faders and inserts. On hardware mixers, the auxiliary 'channels' are usually little more than level knobs for input and output. Obviously, larger consoles have much greater flexibility in this regard.
In Logic 8 and 9, you can create a bus "object" in the environment. I wouldn't touch this, BUT IF YOU DO, the cool thing is that you can get at the signal on the bus and effect it - if you want to.
For example, say you had a snare on track 1, and used an aux send (at unity) which sent its signal over bus 1 to auxiliary 1. If you created a 'bus object' in the environment and pulled down the faer by -6dB, the auxiliary will get a signal that is 6dB down from unity.
An auxiliary is a channel, a bus is a path (except for that crazy 'bus object')
Paul

Track grouping and chapter creation

Similar Messages

Maybe you are looking for