Track keyboard and mouse activity?

Is there any way to track my keyboard and mouse activity? Like mouse clicks etc, Im not interersted in any kind of keylogger.
Edit: I found this: http://whatpulse.org
Last edited by Hund (2011-01-03 02:28:09)

Check your batteries in the wireless hardware.
For the wired hardware see KB Article & do the necessary: http://support.apple.com/kb/HT1379

Similar Messages

Cannot Access Keyboard and Mouse Preferences

For some reason I've had lots of problems accessing the Keyboard and Mouse preference pane of the System Preferences.
Prior, I could open the pane, and whenever i switched between keyboard, mouse and trackpad, I would get overlap. Basically, bits and pieces from each setting wouldn't disappear when the new device (either keyboard, or trackpad, or mouse, etc) was selected, so everything would look mumble-jumbled.
Now, however, I can't even open the settings. I've rebooted, Repaired permissions and relaunched finder, but have had no luck. When I click on the Keyboard and mouse Button, all I get is a message in the title bar of the window itself saying: "Loading Keyboard & Mouse..." with no effect. Any ideas???

I was having the same problem too. I deleted some preference file (sorry I can't remember which one, I found it here on the forums) and it started working. Sort of... Now I can actually open up the "Keyboard and Mouse" pane, but when I click on the mouse button I don't have the correct options.
I have a 2-button wheel mouse connected, but I don't have the option to assign the wheel button a function. I can't assign the left and right buttons functions either. The only option is to make the "Primary mouse button" left or right. It also has controls for tracking speed, scroll speed, and double-click speed. But I've lost the ability to assign the buttons to the functions I want them assigned to.
The even stranger part is that the buttons do what I want them to do still. My right button acts like a right-click (control-click) even though it doesn't show on the mouse preferences.
I want to be able to change the wheel button so that it doesn't activate my Dashboard but I can't. If I press too hard while scrolling up or down with the wheel the Dashboard is activated. It's so annoying...

Keyboard and mouse randomly don't work after boot

Hello there, I have been having a problem lately with the keyboard. Some times after the booting process it doesn't work, forcing me to restart my laptop even 3 or 4 times before getting it to work properly.
Here is the keyboard boot process. wich has actually a problem that I can't understand clearly.
dmesg |grep keyboard
[ 2.308714] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[ 2.959550] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
I noticed this error during the boot preocess, how should it be interpreted?
I'm sure in the kernel, the device atkbd is selected.
The synaptics mouse instead, doesn't work properly in X
My mouse is a synaptic touchpad and when I start x, instead of loading the synaptic device, xfce simply see it as ps/2. Also this happens randomly.
dmesg |grep mouse
[ 2.098008] mousedev: PS/2 mouse device common for all mice
[ 4.836233] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
[ 6.696381] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
Xorg conf:
Section "inputdevice"
identifier "synaptics touchpad"
driver "synaptics"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Endsection
Any suggestion?

Welcome to Apple Discussions!
Has your keyboard and mouse quit working altogether or just when the computer is hot? And do I understand that an external keyboard and mouse will work with no problems?
And I am wondering about your computer running unusually hot. Are your fans operating properly? You might want to run the extended version of the Apple Hardware test to be sure that the fans and thermal sensors are working properly. If they are not, you will get one or more error codes.
Another thing to do to check when your Mac is unusually hot is the Activity Monitor. Select "All Processes" at the top right and check for any process running that should not be which is using lots of CPU.
I don't know if the keyboard problem is related to the heat problem or not, but I would want to know what is causing the heat problem too. Over time, excessive heat can cause damage to the logic board. It could also conceivably damage the ribbon cable which connects the keyboard and I would guess that the trackpad could also be affected. So it is important to see what is going on here. If you have been experiencing excessive heat on a regular basis, this might be the underlying cause of your keyboard and trackpad problems. If so, the heat problem will have to be fixed or the other problem will recur over time.
Try the AHT and post back with any results. Also, use iStatPro to check on your fans and make sure both are running at roughly equal speeds and that they run faster when the computer gets hot.
Good luck!

Need to have the keyboard and mouse 100 feet away from Mac

I need to have the Keyboard and Mouse/Track-pad 100 feet away from Mac Mini.
What are my options ?
Thanks

In your case with the need to control it from multiple locations the best and realistically only solution is to use Screen Sharing to remotely control the Mac.
With this solution you can control it from anywhere you have a network connection and could use a laptop to control the Mac mini. This is the solution I use in a very similar situation.
Bluetooth does not have enough range, even RF wireless keyboard and mice devices also would not have the range, and I don't believe there is a suitable USB solution.
The only other possibility that occurs to me is to use an IP based KVM. A KVM (Keyboard/Video/Mouse) switch box allows multiple computers to be controlled from typically a single keyboard and mouse. However there are versions which allows you to do this over a TCP/IP network i.e. Ethernet. Then again you would be able to do this anywhere on your network. Here is one example - http://www.aten-usa.com/products/productItem.php?model_no=CN8600
Personally I still strongly recommend using Screen Sharing. Its built-in and completely free!

Trick for Pairing Bluetooth Keyboard and Mouse With Windows 7 in BC 3.1

My Mac:
Mid-2007 iMac 20", 2.4 GHz; OS X 10.6.2; Windows 7 Home; Boot Camp 3.1
My Problem:
No matter what I tried, including all kinds of tips and tricks found in this forum and elsewhere on the web, I could not get my Apple aluminum bluetooth keyboard and bluetooth Mighty Mouse to pair in Windows 7. Windows 7's bluetooth setup panel would see them, from time to time, but never connected.
The same pair connected quite easily with Snow Leopard, and the keyboard connected before I installed BC 3.1 in Win 7 (never did get the MM to connect in Win 7 with BC 3.0). But with BC 3.1 in Win 7, it was no dice for either one until I made an accidental discovery.
While prepping another Apple bluetooth aluminum keyboard for my wife's Mac Mini, it was seen by my iMac's Win 7, which wanted to pair with it.
Aha! A Big Clue! The Win 7 BC 3.1 generic bluetooth drivers wanted to pair with an aluminum keyboard that wasn't already paired with the iMac. So, I booted back into Snow Leopard, connected a USB mouse and keyboard, renamed the bluetooth mouse and keyboard, and then deleted them. I rebooted back into Win 7, then easily set up both renamed mouse and keyboard which paired quickly with Windows.
Note that I first tried deleting them from the Snow Leopard side first, but Win 7 still wouldn't pair with them. That's when I went back to Snow Leopard and renamed them but didn't pair them with the iMac until it was booted into Win 7.
Finally, I rebooted back into Snow Leopard and paired the keyboard and mouse with OS X. Done.
Hope this trick/tip/hint helps someone else with keyboard and mouse bluetooth pairing problems.

You're welcome. My discovery was quite accidental, but that's often how things happen ... if you're paying attention and are looking for clues.
Sorry you had to trial and error before you succeeded, but as you've probably found, it is necessary to rename the bluetooth devices first, then delete them from OS X.
I don't understand why this trick was necessary, or even what caused it to happen. I've got 6 Win 7 installations via Boot Camp on 6 Intel Macs (2 white MacBooks, 1 Unibody MacBook, a Core Duo Mac Mini, a 27" iMac and the 20" 2.4 Mid-2007 iMac). All were running 10.6.2 and Win 7 (aren't Family Packs wonderful?) via Boot Camp 3.0 more or less without problems, except as noted in my first post.
Only the 20" iMac had problems after the Boot Camp 3.1. Not only did I have a devil of a time pairing the keyboard and mouse, but I also lost the Win 7 activation on the iMac 20" and the OS X partition started showing up as "EFI Boot". All happened right after I updated Boot Camp 3.0 to 3.1 via download from Apple while running Win 7.
I've heard reports of other Mac users discovering Boot Camp had done a FUBAR job on their machines, but this is my first experience. My guess is that there's some dialogue going on between 10.6, Win 7 and Boot Camp that shouldn't be happening. What I really don't understand is why my other 5 Macs didn't have any problems at all with the Boot Camp upgrade to 3.1. Let's hope the Apple Boot Camp team can reverse engineer my discovery and improve the next version of BC.

My Mac wireless keyboard and mouse won't reconnect

My Mac wireless keyboard and and mouse one day disconnected and I can't reconnect. They have new batteries.

Hi Saint Anne,
Happy Thanksgiving Day! Since both of your wireless input devices are not working at the moment, do you have a wired mouse you can use to straighten this out? Here are some troubleshooting steps to try:
Wireless Connection issue
Make sure Bluetooth is turned on
First, choose Apple () menu > System Preferences > Bluetooth and confirm that Bluetooth is turned ON.
The Bluetooth menu bar icon should turn:
Black if Bluetooth is turned ON and no devices are connected.
Light grey with three dots if Bluetooth is ON and at least one wireless device is connected.
Light grey (or disappear completely) if Bluetooth is turned OFF, or if the iMac is unable to communicate with the Bluetooth module.
Refer to the Bluetooth Menu Icon table below for more information on determining the Bluetooth status. If the Bluetooth icon does not appear, or if the menu bar status continues to indicate that Bluetooth is off, restart your computer and then attempt to turn Bluetooth ON again.
Bluetooth OFF
Bluetooth ON and connected to wireless device
Bluetooth menu icon
Bluetooth status
Bluetooth turned on, but there are no devices connected to the Mac. See the "Make sure the wireless mouse or keyboard is turned on" section of this article.
Bluetooth turned on and at least one wireless device is connected. See the "Make sure the wireless mouse or keyboard is turned on" section of this article.
When this icon flashes, at least one wireless device has a low battery. Click the Bluetooth icon to identify the affected device, then replace the batteries.
Bluetooth is off. Click the Bluetooth icon using a USB mouse and select "Turn Bluetooth On". Note: Mac OS X won’t allow Bluetooth to be turned off unless a USB mouse is connected.
Bluetooth offline. Restart your Mac. If the Bluetooth status doesn’t change, disconnect all USB devices and restart your Mac again.
Make sure the wireless mouse and keyboard are turned on.
Mouse
Slide the On/Off switch on the bottom of your mouse to turn it on. Note: If the battery compartment cover is not installed properly the On/Off switch may not function correctly or may be difficult to operate. Remove the battery compartment cover and carefully reinstall it.
When your mouse is on and paired, and the batteries are charged, the indicator light glows steadily.
If your mouse isn’t paired with a Mac, the indicator light will blink, indicating your mouse is in discovery mode and ready to pair.
If the indicator light doesn't illuminate, check to make sure you have two good batteries and that they're installed correctly.
Keyboard
Push and release the On/Off switch to turn on the Apple Wireless Keyboard.
When your keyboard is on and paired, and the batteries are charged, the light will glow steadily for several seconds, then turn off.
If your wireless keyboard isn’t paired with your Mac, the indicator light will begin to blink. This indicates your keyboard is in discovery mode and ready to pair with your Mac.
If the LED doesn't light up, remove the batteries to make sure they're good and that they're installed correctly.
Check preferences
From the Apple () menu, choose System Preferences, then choose Bluetooth from the View menu. The Bluetooth preferences pane will list the Bluetooth devices paired with the computer, the status of the devices (paired or connected), and whether Bluetooth power is on or not.
Click the gear icon and choose "Connect" to connect a device that is powered on.
To set up a new device, click the + icon and follow the Bluetooth setup assistant.
If the Mouse System Preferences pane is open and no wired or wireless mouse is connected, your Mac will immediately start looking for a wireless mouse (with Mac OS X v10.6. For Mac OS X v10.5, the Setup Assistant should open).
Keyboard or mouse intermittently stops responding
Click the mouse
Click the mouse once to reconnect it with your Mac. It may take a moment for the mouse to respond.
Check the battery level of the mouse. Choose System Preferences from the Apple (), then choose Mouse from the View menu. The battery level indicator is in the lower-left corner. Replace the batteries if they are low. Note: Choose Keyboard & Mouse from the View menu with Mac OS X v10.5. For more information on keyboard and mouse battery levels in Mac OS X v10.5, see Desktop computers: Troubleshooting wireless keyboard and mouse issues.
Press a key on the keyboard
Press a key on the keyboard to reconnect it with your Mac. It may take a moment for the keyboard to respond.
Check the battery level of the keyboard. Choose System Preferences from the Apple (), then choose Keyboard from the View menu and select the Keyboard tab. The battery level indicator is in the lower-left corner. Replace the batteries if they are low.
Check for signal interference
Wireless networks that operate on 2.4GHz may cause interference.
Move cordless phone base stations, microwave ovens, and other 2.4GHz electrical devices away from the Mac if you suspect interference.
Keep wireless devices within 10 meters (33 feet) of the Mac.
Avoid putting metal objects between the device and the Mac.
Mouse doesn't scroll up or down or side to side
For mice that have a scroll ball, refer to How to clean your Mighty Mouse.
Check the Scrolling speed slide-control at the top, and make sure the “Scroll” checkbox is checked.
For scrolling side-to-side, make sure the application you’re using supports side-to-side scrolling.
Remember, scrolling is done with one finger, and navigating is done by swiping side-to-side with two fingers.
Navigating moves from page to page in a document or internet browser unlike scrolling.
Mouse does not track as expected (jittery, jumpy, slow, fast).
The Apple Wireless Mouse can be used on most smooth surfaces, however if tracking issues occur try these options:
Choose System Preferences from the Apple () menu, then choose Mouse from the View menu. Set the Tracking slider to adjust how fast the pointer moves as you move the mouse.
Try using a different surface to see if the tracking improves.
Turn the mouse over and inspect the sensor window. Use compressed air to gently clean the sensor window if dust or debris is present.
If multiple Bluetooth wireless devices are in use nearby, try turning them off one at a time to see if the issue improves. Bandwidth intensive devices could affect tracking.
Mouse buttons do not work as expected.
The Mouse preference pane allows users to customize the mouse features to meet their needs.
Choose System Preferences from the Apple () menu, then choose Mouse from the View menu. Set the Tracking slider to adjust how fast the pointer moves as you move the mouse.
Try using a different surface to see if the tracking improves.
Turn the mouse over and inspect the sensor window. Use compressed air to gently clean the sensor window if dust or debris is present.
If multiple Bluetooth wireless devices are in use nearby, try turning them off one at a time to see if the issue improves. Bandwidth intensive devices could affect tracking.
Keyboard has one or more keys that do not respond.
Use the Keyboard Viewer to test whether the keyboard keys are responding correctly when they are pressed.
Choose System Preferences from the Apple () menu, then choose Language & Textfrom the View menu (or International from the View menu in Mac OS X v10.5 or earlier).
Select Input Sources.
Select the Keyboard & Character Viewer checkbox.
Enable the input source for the keyboard layout you are testing by selecting the checkbox next to it.
Make sure that "Show Input menu in menu bar" is enabled.
Choose Show Keyboard Viewer from the Input menu in the menu bar, as shown.
The Keyboard Viewer shows the keyboard layout.
Type the key on the keyboard that doesn’t respond and observe whether the corresponding key highlights on the Keyboard Viewer. If it does, that particular key is functioning correctly. In the sample shown above the shift and command keys are being pressed.
If the mouse keys feature in the Universal Access System Preferences pane is enabled, many of the keyboard keys may not respond as expected.
Try starting up into single user mode to determine whether a software issue is causing the issue.
Cheers,
Judy

Why have my Logitech wireless keyboard and mouse suddenly become poky and erratic?

Hi, I'm running a new mac mini (Dec 2014) with 10.10.2 on it. Out of the blue today my Logitech wireless accessories (with unifying receiver) became very sluggish with overall slow response times and at times the mouse is completely unresponsive. It really was working just fine until today. I went out and bought a new mouse to see if that would rectify it - and I still have the same kind of odd mouse behavior.
What's different between today and yesterday? I installed Dropbox and the new Microsoft '16 suite. I can't imagine that those two suites would impact a keyboard and mouse. I even did a refresh of the O.S. Any suggestions?

Thank you for trying to assist me Bob. Here's my EtreCheck output.
Problem description:
My logitech mouse and keyboard have become very erratic
EtreCheck version: 2.1.8 (121)
Report generated March 8, 2015 at 7:02:55 AM CDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    Mac mini (Late 2014) (Technical Specifications)
    Mac mini - model: Macmini7,1
    1 1.4 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Not upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
    Intel HD Graphics 5000
        S24D390 spdisplays_1080p
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 10:54:12
Disk Information: ℹ️
    APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 498.89 GB (404.50 GB free)
            Core Storage: disk0s2 499.25 GB Online
USB Information: ℹ️
    Western Digital My Book 1140 3 TB
        EFI (disk2s1) <not mounted> : 315 MB
        Back Up Drive (disk2s2) /Volumes/Back Up Drive : 3.00 TB (2.23 TB free)
    Logitech USB Receiver
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/VyprVPN.app
    [loaded]    foo.tap (1.0) [Click for support]
    [loaded]    foo.tun (1.0) [Click for support]
        /Library/Extensions
    [loaded]    com.Logitech.Control Center.HID Driver (3.9.1 - SDK 10.8) [Click for support]
        /System/Library/Extensions
    [loaded]    com.Logitech.Unifying.HID Driver (1.3.0 - SDK 10.6) [Click for support]
Launch Agents: ℹ️
    [running]    com.Logitech.Control Center.Daemon.plist [Click for support]
Launch Daemons: ℹ️
    [running]    vyprvpnservice.plist [Click for support]
User Launch Agents: ℹ️
    [failed]    com.lastpass.LastPassHelper.plist [Click for support]
    [running]    com.PKWARE.Viivo.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Dropbox    Application (/Applications/Dropbox.app)
    VyprVPN    Application (/Applications/VyprVPN.app)
    EvernoteHelper    Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
Internet Plug-ins: ℹ️
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    nplastpass: Version: 3.1.89 - SDK 10.10 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SlingPlayer: Version: Unknown - SDK 10.8 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
    Evernote Web Clipper
    LastPass
3rd Party Preference Panes: ℹ️
    Logitech Control Center [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         6%    Dropbox
         4%    WindowServer
         3%    firefox
         1%    Viivo
         0%    fontd
Top Processes by Memory: ℹ️
    593 MB    firefox
    150 MB    com.apple.WebKit.WebContent
    137 MB    Evernote
    116 MB    Dropbox
    107 MB    Safari
Virtual Memory Information: ℹ️
    131 MB    Free RAM
    1.76 GB    Active RAM
    1.52 GB    Inactive RAM
    684 MB    Wired RAM
    15.37 GB    Page-ins
    290 MB    Page-outs
Diagnostics Information: ℹ️
    Mar 7, 2015, 07:07:34 PM    Self test - passed
    Mar 7, 2015, 05:34:08 PM    /Library/Logs/DiagnosticReports/vyprvpnservice_2015-03-07-173408_[redacted].cra sh
    Mar 7, 2015, 04:58:31 PM    /Library/Logs/DiagnosticReports/vyprvpnservice_2015-03-07-165831_[redacted].cra sh
    Mar 7, 2015, 06:49:17 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/EvernoteHelper_2015-03-07-0649 17_[redacted].crash

USB Keyboard and mouse

I have just purchased a Beige Powermac G3 MT, and I would like to use a USB keyboard with it.
I do have an AppleDesign keyboard, but it's not that nice to type on.
If I were to use an Apple Pro keyboard and mouse would this just work fine on the G3 right from startup or would I have to wait for MacOS to load before they work propely?
Also, how would I go about switching on the computer using a Pro keyboard? Is this only possible with the ADB keyboard?
Are there any other Apple ADB keyboards that are much nicer to type on than the AppleDesign keyboard which I could use if the Pro keyboard won't work properly on the G3?
Thanks
Steve

Stephen,
Start-up is easy. Keep the old Apple ADB keyboard attached but tuck it out of the way so only the power button is accessible. Keeping an ADB board attached is also useful because of the variety of startup key combos that help with maintenance and debugging.
To use a USB keyboard, you need to install a PCI card that gives you USB ports. Avoid USB cards marketed by Belkin; some of theirs have not played well with the Beige G3. Consider a FireWire/USB combo card; they don't cost that much more and open the world of FireWire to you (nice, fast external hard drives, for example).
Any USB device will not go active until the USB extensions load. That's why the old ADB board is nice to keep attached--it is active all the time, using the same power bypass system that keeps PRAM contents when the computer is turned off.
Allan

Keyboard and mouse not working after boot

Hello!
it's my first time here
I have been using archlinux for a couple of months and after an upgrade, my mouse and keyboard stopped working.
I have also posted it on linuxquestions:
http://www.linuxquestions.org/questions … ot-934040/
What might be causing that problem?
and, considering the problem occurred after an upgrade, reinstalling the system would correct it?

when booting into runlevel my pacman.log(only for Mar 11 11:35:37 myhost Mar 11 11:35:37 myhost Mar 11 11:35:37 myhost Mar 11 11:35:37 myhost Mar 11 11:39:41 myhost Mar 11 11:39:41 myhost Mar 11 11:39:41 myhost Mar 11 11:42:11 myhost Mar 11 11:42:11 myhost Mar 11 11:42:11 myhost Mar 11 11:44:41 myhost Mar 11 11:44:41 myhost Mar 11 11:44:41 myhost Mar 11 12:06:33 myhost Mar 11 12:06:33 myhost Mar 11 12:06:33 myhost Mar 11 12:16:45 myhost Mar 11 12:16:45 myhost Mar 11 12:16:45 myhost Mar 11 12:19:15 myhost Mar 11 12:19:15 myhost Mar 11 12:19:15 myhost Mar 11 12:21:45 myhost Mar 11 12:21:45 myhost Mar 11 12:21:45 myhost Mar 11 12:23:41 myhost Mar 11 12:23:41 myhost Mar 11 12:23:41 myhost Mar 11 12:31:56 myhost Mar 11 12:31:56 myhost Mar 11 12:31:56 myhost Mar 11 12:34:26 myhost Mar 11 12:34:26 myhost Mar 11 12:34:26 myhost Mar 11 12:35:37 myhost Mar 11 12:35:37 myhost Mar 11 12:35:37 myhost Mar 11 12:35:37 myhost Mar 11 12:36:56 myhost Mar 11 12:36:56 myhost Mar 11 12:36:56 myhost Mar 11 12:40:27 myhost Mar 11 12:40:27 myhost Mar 11 12:40:27 myhost Mar 11 12:52:30 myhost Mar 11 12:52:30 myhost Mar 11 12:52:30 myhost Mar 11 12:55:00 myhost Mar 11 12:55:00 myhost Mar 11 12:55:00 myhost Mar 11 12:57:30 myhost Mar 11 12:57:30 myhost Mar 11 12:57:30 myhost Mar 11 13:21:01 myhost -- MARK --
Mar 11 13:35:37 myhost Mar 11 13:35:37 myhost Mar 11 13:35:37 myhost Mar 11 13:35:37 myhost Mar 11 13:55:37 myhost -- MARK --
Mar 11 14:21:01 myhost -- MARK --
Mar 11 14:35:37 myhost Mar 11 14:35:37 myhost Mar 11 14:35:37 myhost Mar 11 14:35:37 myhost Mar 11 14:55:37 myhost -- MARK --
Mar 11 15:21:01 myhost -- MARK --
Mar 11 15:35:38 myhost Mar 11 15:35:38 myhost Mar 11 15:35:38 myhost Mar 11 15:35:38 myhost Mar 11 15:55:38 myhost -- MARK --
Mar 11 16:21:01 myhost -- MARK --
Mar 11 16:35:38 myhost Mar 11 16:35:38 myhost Mar 11 16:35:38 myhost Mar 11 16:35:38 myhost Mar 11 16:51:02 myhost Mar 11 16:51:02 myhost Mar 11 16:51:02 myhost Mar 11 17:21:01 myhost -- MARK --
Mar 11 17:27:48 myhost Mar 11 17:28:18 myhost Mar 11 17:28:18 myhost Mar 11 17:28:18 myhost Mar 11 17:28:18 myhost Mar 11 17:28:25 myhost Mar 11 17:28:34 myhost Mar 11 17:28:34 myhost Mar 11 17:28:34 myhost Mar 11 17:28:34 myhost Mar 11 17:28:46 myhost Mar 11 17:28:46 myhost Mar 11 17:28:46 myhost Mar 11 17:28:46 myhost Mar 11 17:28:47 myhost Mar 11 17:28:47 myhost Mar 11 17:29:04 myhost Mar 11 17:29:04 myhost Mar 11 17:29:04 myhost Mar 11 17:29:05 myhost Mar 11 17:29:14 myhost Mar 11 17:29:14 myhost Mar 11 17:29:14 myhost Mar 11 17:29:14 myhost Mar 11 17:29:19 myhost Mar 11 17:29:19 myhost Mar 11 17:29:19 myhost Mar 11 17:29:20 myhost Mar 11 17:29:20 myhost Mar 11 17:29:20 myhost Mar 11 17:29:20 myhost Mar 11 17:29:20 myhost Mar 11 17:29:20 myhost Mar 11 17:30:18 myhost Mar 11 17:30:18 myhost Mar 11 17:30:18 myhost Mar 11 17:30:18 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:32:15 myhost Mar 11 17:32:15 myhost Mar 11 17:32:15 myhost Mar 11 17:32:15 myhost Mar 11 17:32:15 myhost Mar 11 17:35:38 myhost Mar 11 17:35:38 myhost Mar 11 17:35:38 myhost Mar 11 17:35:38 myhost Mar 11 17:55:07 myhost Mar 11 17:55:07 myhost Mar 11 17:55:07 myhost Mar 11 17:57:37 myhost Mar 11 17:57:37 myhost Mar 11 17:57:37 myhost Mar 11 18:00:07 myhost Mar 11 18:00:07 myhost Mar 11 18:00:07 myhost Mar 11 18:17:33 myhost Mar 11 18:17:33 myhost Mar 11 18:17:33 myhost Mar 11 18:35:38 myhost Mar 11 18:35:38 myhost Mar 11 18:35:38 myhost Mar 11 18:35:38 myhost Mar 11 18:55:39 myhost -- MARK --
Mar 11 19:21:01 myhost -- MARK --
Mar 11 19:27:03 myhost Mar 11 19:27:04 myhost Mar 11 19:27:04 myhost Mar 11 19:29:33 myhost Mar 11 19:29:33 myhost Mar 11 19:29:33 myhost Mar 11 19:32:03 myhost Mar 11 19:32:03 myhost Mar 11 19:32:03 myhost Mar 11 19:34:05 myhost Mar 11 19:34:05 myhost Mar 11 19:34:05 myhost Mar 11 19:35:38 myhost Mar 11 19:35:38 myhost Mar 11 19:35:38 myhost Mar 11 19:35:38 myhost Mar 11 19:55:38 myhost -- MARK --
Mar 11 20:21:01 myhost -- MARK --
Mar 11 20:32:12 myhost Mar 11 20:32:12 myhost Mar 11 20:32:12 myhost Mar 11 20:34:42 myhost Mar 11 20:34:42 myhost Mar 11 20:34:42 myhost Mar 11 20:35:38 myhost Mar 11 20:35:38 myhost Mar 11 20:35:38 myhost Mar 11 20:35:38 myhost Mar 11 20:37:12 myhost Mar 11 20:37:12 myhost Mar 11 20:37:12 myhost Mar 11 20:48:37 myhost Mar 11 20:48:37 myhost Mar 11 20:48:37 myhost Mar 11 20:54:44 myhost Mar 11 20:54:44 myhost Mar 11 20:54:48 myhost Mar 11 20:54:48 myhost Mar 11 20:54:48 myhost Mar 11 20:54:48 myhost Mar 11 20:54:48 myhost Mar 11 20:54:49 myhost Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:26:01 myhost Mar 12 10:26:01 myhost Mar 12 10:26:01 myhost Mar 12 10:26:01 myhost Mar 12 10:26:01 myhost Mar 12 10:26:01 myhost Mar 12 10:26:01 myhost Mar 12 10:26:01 myhost Mar 12 10:26:02 myhost kernel: [ Mar 12 10:26:57 myhost Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12 3, the keyboard and mouse works fine.
the update day) and messages.log are:
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[2756]: eth0: eth0: MTU set to 576
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[2926]: eth0: eth0: MTU set to 576
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[3041]: eth0: eth0: MTU set to 576
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[3095]: eth0: eth0: MTU set to 576
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[3144]: eth0: eth0: MTU set to 576
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[3192]: eth0: eth0: MTU set to 576
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
init: Trying to re-exec init
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
kernel: [25090.053873] mdadm: sending ioctl 800c0910 to a partition!
kernel: [25090.053877] mdadm: sending ioctl 800c0910 to a partition!
kernel: [25090.053883] mdadm: sending ioctl 1261 to a partition!
kernel: [25090.053885] mdadm: sending ioctl 1261 to a partition!
kernel: [25090.060059] mdadm: sending ioctl 1261 to a partition!
kernel: [25090.060061] mdadm: sending ioctl 1261 to a partition!
kernel: [25090.076899] mdadm: sending ioctl 1261 to a partition!
kernel: [25090.076902] mdadm: sending ioctl 1261 to a partition!
kernel: [25090.077037] mdadm: sending ioctl 1261 to a partition!
kernel: [25090.077039] mdadm: sending ioctl 1261 to a partition!
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[6669]: eth0: eth0: MTU set to 576
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[7243]: eth0: eth0: MTU set to 576
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[8708]: eth0: eth0: MTU set to 576
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[10147]: eth0: eth0: MTU set to 576
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
shutdown[10347]: shutting down for system halt
init: Switching to runlevel: 0
dhcpcd[10522]: sending signal 1 to pid 1269
dhcpcd[1269]: received SIGHUP, releasing
dhcpcd[1269]: eth0: releasing lease of 192.168.1.100
dhcpcd[10522]: waiting for pid 1269 to exit
dhcpcd[10527]: eth0: eth0: MTU restored to 1500
dhcpcd[1269]: eth0: removing interface
0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
0.000000] BIOS-provided physical RAM map:
0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0.000000] BIOS-e820: 0000000100000000 - 0Mar 12 10:25:59 myhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
0.000000] BIOS-provided physical RAM map:
0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
0.000000] NX (Execute Disable) protection: active
0.000000] DMI present.
0.000000] No AGP bridge found
0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
0.000000] last_pfn = 0xbffc0 max_arch_pfn = 0x400000000
0.000000] found SMP MP-table at [ffff8800000ff780] ff780
0.000000] Using GB pages for direct mapping
0.000000] init_memory_mapping: 0000000000000000-00000000bffc0000
0.000000] init_memory_mapping: 0000000100000000-0000000140000000
0.000000] RAMDISK: 3759a000 - 37ff0000
0.000000] ACPI: RSDP 00000000000fa1f0 00014 (v00 ACPIAM)
0.000000] ACPI: RSDT 00000000bffc0000 00038 (v01 021709 RSDT1317 20090217 MSFT 00000097)
0.000000] ACPI: FACP 00000000bffc0200 00084 (v01 021709 FACP1317 20090217 MSFT 00000097)
0.000000] ACPI: DSDT 00000000bffc04a0 04880 (v01 1ADKR 1ADKR017 00000017 INTL 20051117)
0.000000] ACPI: FACS 00000000bffce000 00040
0.000000] ACPI: APIC 00000000bffc0390 00080 (v01 021709 APIC1317 20090217 MSFT 00000097)
0.000000] ACPI: MCFG 00000000bffc0410 0003C (v01 021709 OEMMCFG 20090217 MSFT 00000097)
0.000000] ACPI: WDRT 00000000bffc0450 00047 (v01 021709 NV-WDRT 20090217 MSFT 00000097)
0.000000] ACPI: OEMB 00000000bffce040 00071 (v01 021709 OEMB1317 20090217 MSFT 00000097)
0.000000] Scanning NUMA topology in Northbridge 24
0.000000] No NUMA configuration found
0.000000] Faking a node at 0000000000000000-0000000140000000
0.000000] Initmem setup node 0 0000000000000000-0000000140000000
0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
0.000000] Zone PFN ranges:
0.000000] DMA 0x00000010 -> 0x00001000
0.000000] DMA32 0x00001000 -> 0x00100000
0.000000] Normal 0x00100000 -> 0x00140000
0.000000] Movable zone start PFN for each node
0.000000] early_node_map[3] active PFN ranges
0.000000] 0: 0x00000010 -> 0x0000009f
0.000000] 0: 0x00000100 -> 0x000bffc0
0.000000] 0: 0x00100000 -> 0x00140000
0.000000] Nvidia board detected. Ignoring ACPI timer override.
0.000000] If you got timer trouble try acpi_use_timer_override
0.000000] ACPI: PM-Timer IO Port: 0x4008
0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
0.000000] IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
0.000000] PM: Registered nosave memory: 00000000bffc0000 - 00000000bffce000
0.000000] PM: Registered nosave memory: 00000000bffce000 - 00000000bfff0000
0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfffe000
0.000000] PM: Registered nosave memory: 00000000bfffe000 - 00000000fec00000
0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
0.000000] Allocating PCI resources starting at bfffe000 (gap: bfffe000:3ec02000)
0.000000] Booting paravirtualized kernel on bare hardware
0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82176 r8192 d24320 u524288
0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027914
0.000000] Policy zone: Normal
0.000000] Kernel command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
0.000000] Checking aperture...
0.000000] No AGP bridge found
0.000000] Node 0: aperture @ 748000000 size 32 MB
0.000000] Aperture beyond 4GB. Ignoring.
0.000000] Your BIOS doesn't leave a aperture memory hole
0.000000] Please enable the IOMMU option in the BIOS setup
0.000000] This costs you 64 MB of RAM
0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
0.000000] Memory: 3974248k/5242880k available (4488k kernel code, 1049284k absent, 219348k reserved, 4409k data, 736k init)
0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
0.000000] Preemptible hierarchical RCU implementation.
0.000000] Verbose stalled-CPUs detection is disabled.
0.000000] NR_IRQS:4352 nr_irqs:712 16
0.000000] Console: colour VGA+ 80x25
0.000000] console [tty0] enabled
0.000000] allocated 33554432 bytes of page_cgroup
0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
0.000000] Fast TSC calibration using PIT
0.000000] Detected 2109.668 MHz processor.
0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 4221.14 BogoMIPS (lpj=7032226)
0.003342] pid_max: default: 32768 minimum: 301
0.003370] Security Framework initialized
0.003376] AppArmor: AppArmor disabled by boot time parameter
0.003905] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
0.007031] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
0.007954] Mount-cache hash table entries: 256
0.008114] Initializing cgroup subsys cpuacct
0.008121] Initializing cgroup subsys memory
0.008131] Initializing cgroup subsys devices
0.008133] Initializing cgroup subsys freezer
0.008136] Initializing cgroup subsys net_cls
0.008138] Initializing cgroup subsys blkio
0.008192] CPU: Physical Processor ID: 0
0.008194] CPU: Processor Core ID: 0
0.008197] mce: CPU supports 6 MCE banks
0.008208] using AMD E400 aware idle routine
0.009025] ACPI: Core revision 20110623
0.011442] ftrace: allocating 17394 entries in 69 pages
0.014007] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
0.047059] CPU0: AMD Phenom(tm) 8400 Triple-Core Processor stepping 02
0.049997] Performance Events: AMD PMU driver.
0.049997] ... version: 0
0.049997] ... bit width: 48
0.049997] ... generic registers: 4
0.049997] ... value mask: 0000ffffffffffff
0.049997] ... max period: 00007fffffffffff
0.049997] ... fixed-purpose events: 0
0.049997] ... event mask: 000000000000000f
0.066733] NMI watchdog enabled, takes one hw-pmu counter.
0.093342] Booting Node 0, Processors #1
0.190007] NMI watchdog enabled, takes one hw-pmu counter.
0.210005] #2
0.306665] NMI watchdog enabled, takes one hw-pmu counter.
0.313317] Brought up 3 CPUs
0.313319] Total of 3 processors activated (12662.21 BogoMIPS).
0.315139] devtmpfs: initialized
0.317377] PM: Registering ACPI NVS region at bffce000 (139264 bytes)
0.317603] print_constraints: dummy:
0.317656] NET: Registered protocol family 16
0.317767] TOM: 00000000c0000000 aka 3072M
0.317784] TOM2: 0000000140000000 aka 5120M
0.317805] Extended Config Space enabled on 1 nodes
0.317819] ACPI: bus type pci registered
0.317893] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
0.317896] PCI: not using MMCONFIG
0.317898] PCI: Using configuration type 1 for base access
0.317899] PCI: Using configuration type 1 for extended access
0.318408] bio: create slab <bio-0> at 0
0.318408] ACPI: Added _OSI(Module Device)
0.318408] ACPI: Added _OSI(Processor Device)
0.318408] ACPI: Added _OSI(3.0 _SCP Extensions)
0.318408] ACPI: Added _OSI(Processor Aggregator Device)
0.321075] ACPI: Executed 1 blocks of module-level executable AML code
0.322673] ACPI: Interpreter enabled
0.322677] ACPI: (supports S0 S1 S4 S5)
0.322695] ACPI: Using IOAPIC for interrupt routing
0.322713] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
0.323739] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
0.353905] ACPI: No dock devices found.
0.353908] HEST: Table not found.
0.353912] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
0.354095] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
0.354265] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
0.354268] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
0.354271] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
0.354273] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
0.354276] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xdfffffff]
0.354279] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
0.355812] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
0.359989] pci 0000:00:09.0: PCI bridge to [bus 02-02]
0.360030] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
0.360061] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
0.360429] pci0000:00: Requesting ACPI _OSC control (0x1d)
0.360569] pci0000:00: ACPI _OSC control (0x1d) granted
0.365142] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
0.365238] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
0.365330] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
0.365424] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
0.365515] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
0.365606] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
0.365697] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
0.365788] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
0.365882] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
0.365973] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
0.366073] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
0.366165] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
0.366256] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
0.366346] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
0.366437] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
0.366528] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
0.366618] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
0.366728] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
0.366818] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
0.366818] vgaarb: loaded
0.366818] vgaarb: bridge control possible 0000:02:00.0
0.366818] PCI: Using ACPI for IRQ routing
0.374202] pci 0000:00:01.3: no compatible bridge window for [mem 0xfec80000-0xfecfffff]
0.374361] NetLabel: Initializing
0.374363] NetLabel: domain hash size = 128
0.374365] NetLabel: protocols = UNLABELED CIPSOv4
0.374382] NetLabel: unlabeled traffic allowed by default
0.381236] pnp: PnP ACPI init
0.381259] ACPI: bus type pnp registered
0.382933] system 00:07: [io 0x04d0-0x04d1] has been reserved
0.382939] system 00:07: [io 0x0800-0x080f] has been reserved
0.382942] system 00:07: [io 0x4000-0x407f] has been reserved
0.382945] system 00:07: [io 0x4080-0x40ff] has been reserved
0.382948] system 00:07: [io 0x4400-0x447f] has been reserved
0.382950] system 00:07: [io 0x4480-0x44ff] has been reserved
0.382953] system 00:07: [io 0x4800-0x487f] has been reserved
0.382955] system 00:07: [io 0x4880-0x48ff] has been reserved
0.382958] system 00:07: [io 0x4c00-0x4c7f] has been reserved
0.382960] system 00:07: [io 0x4c80-0x4cff] has been reserved
0.382964] system 00:07: [mem 0x000d0000-0x000d3fff window] has been reserved
0.382966] system 00:07: [mem 0x000d4000-0x000d7fff window] has been reserved
0.382969] system 00:07: [mem 0x000de000-0x000dffff window] has been reserved
0.382973] system 00:07: [mem 0xfec80000-0x1fd93ffff] could not be reserved
0.382975] system 00:07: [mem 0xfefe0000-0xfefe01ff] has been reserved
0.382978] system 00:07: [mem 0xfefe1000-0xfefe1fff] has been reserved
0.382981] system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved
0.382984] system 00:07: [mem 0xffb80000-0xffffffff] could not be reserved
0.383127] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
0.383130] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
0.383413] system 00:0b: [io 0x0a00-0x0adf] has been reserved
0.383416] system 00:0b: [io 0x0ae0-0x0aef] has been reserved
0.383507] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
0.383708] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
0.383710] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
0.383713] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
0.383716] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
0.383719] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
0.383953] pnp: PnP ACPI: found 14 devices
0.383955] ACPI: ACPI bus type pnp unregistered
0.390613] Switching to clocksource acpi_pm
0.390674] pci 0000:00:01.3: BAR 0: assigned [mem 0xd0000000-0xd007ffff]
0.390679] pci 0000:00:01.3: BAR 0: set to [mem 0xd0000000-0xd007ffff] (PCI address [0xd0000000-0xd007ffff])
0.390683] pci 0000:00:04.0: PCI bridge to [bus 01-01]
0.390691] pci 0000:00:09.0: PCI bridge to [bus 02-02]
0.390694] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
0.390698] pci 0000:00:09.0: bridge window [mem 0xdc000000-0xdfffffff]
0.390702] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
0.390706] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
0.390712] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
0.390824] NET: Registered protocol family 2
0.391013] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
0.392601] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
0.395867] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
0.396352] TCP: Hash tables configured (established 524288 bind 65536)
0.396355] TCP reno registered
0.396368] UDP hash table entries: 2048 (order: 4, 65536 bytes)
0.396419] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
0.396554] NET: Registered protocol family 1
0.460124] pci 0000:00:00.0: Found enabled HT MSI Mapping
0.460179] pci 0000:00:00.0: Found enabled HT MSI Mapping
0.460246] pci 0000:00:00.0: Found enabled HT MSI Mapping
0.460312] pci 0000:00:00.0: Found enabled HT MSI Mapping
0.460377] pci 0000:00:00.0: Found enabled HT MSI Mapping
0.460449] pci 0000:00:00.0: Found enabled HT MSI Mapping
0.460526] pci 0000:00:00.0: Found enabled HT MSI Mapping
0.460609] pci 0000:00:00.0: Found enabled HT MSI Mapping
0.460711] Unpacking initramfs...
0.572196] Freeing initrd memory: 10584k freed
0.577900] PCI-DMA: Disabling AGP.
0.581545] PCI-DMA: aperture base @ b4000000 size 65536 KB
0.581547] PCI-DMA: using GART IOMMU.
0.581551] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
0.585462] IBS: LVT offset 1 assigned
0.585486] perf: AMD IBS detected (0x00000007)
0.585671] audit: initializing netlink socket (disabled)
0.585695] type=2000 audit(1331547952.583:1): initialized
0.598511] HugeTLB registered 2 MB page size, pre-allocated 0 pages
0.625385] VFS: Disk quotas dquot_6.5.2
0.625456] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
0.625563] msgmni has been set to 7911
0.625796] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
0.625843] io scheduler noop registered
0.625845] io scheduler deadline registered
0.625880] io scheduler cfq registered (default)
0.626497] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
0.626501] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
0.626523] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
0.626541] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
0.626710] ERST: Table is not found!
0.626712] GHES: HEST is not enabled!
0.626780] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
0.647333] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
0.883974] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
0.943516] Linux agpgart interface v0.103
0.943585] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
0.945853] serio: i8042 KBD port at 0x60,0x64 irq 1
0.945870] serio: i8042 AUX port at 0x60,0x64 irq 12
0.946084] mousedev: PS/2 mouse device common for all mice
0.946138] rtc_cmos 00:02: RTC can wake from S4
0.946297] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
0.946334] rtc0: alarms up to one year, y3k, 114 bytes nvram
0.946347] cpuidle: using governor ladder
0.946350] cpuidle: using governor menu
0.946589] TCP cubic registered
0.946729] NET: Registered protocol family 10
0.947209] NET: Registered protocol family 17
0.947213] Registering the dns_resolver key type
0.947383] registered taskstats version 1
0.960176] rtc_cmos 00:02: setting system clock to 2012-03-12 10:25:53 UTC (1331547953)
0.960226] Initializing network drop monitor service
0.961665] Freeing unused kernel memory: 736k freed
0.961941] Write protecting the kernel read-only data: 8192k
0.964578] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
0.968163] Freeing unused kernel memory: 1636k freed
0.971309] Freeing unused kernel memory: 660k freed
0.983845] udevd[66]: starting version 181
1.019251] usbcore: registered new interface driver usbfs
1.019287] usbcore: registered new interface driver hub
1.019363] usbcore: registered new device driver usb
1.020457] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1.022334] SCSI subsystem initialized
1.024094] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
1.024122] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
1.024181] ehci_hcd 0000:00:02.1: EHCI Host Controller
1.024230] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
1.024274] ehci_hcd 0000:00:02.1: debug port 1
1.024314] ehci_hcd 0000:00:02.1: irq 23, io mem 0xdbf7ec00
1.033384] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
1.033711] hub 1-0:1.0: USB hub found
1.033717] hub 1-0:1.0: 10 ports detected
1.034730] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
1.036435] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
1.036458] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
1.036513] ohci_hcd 0000:00:02.0: OHCI Host Controller
1.036536] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
1.036579] ohci_hcd 0000:00:02.0: irq 22, io mem 0xdbf7f000
1.088876] hub 2-0:1.0: USB hub found
1.088885] hub 2-0:1.0: 10 ports detected
1.090175] scsi0 : pata_amd
1.090309] scsi1 : pata_amd
1.091064] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfff0 irq 14
1.091067] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfff8 irq 15
1.094698] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
1.094721] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
1.095105] scsi2 : sata_nv
1.095190] scsi3 : sata_nv
1.095306] ata3: SATA max UDMA/133 cmd 0xdd80 ctl 0xdd00 bmdma 0xdb00 irq 21
1.095309] ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xdb80 bmdma 0xdb08 irq 21
1.095559] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
1.095574] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
1.095843] scsi4 : sata_nv
1.095923] scsi5 : sata_nv
1.096025] ata5: SATA max UDMA/133 cmd 0xda80 ctl 0xda00 bmdma 0xd880 irq 20
1.096028] ata6: SATA max UDMA/133 cmd 0xd980 ctl 0xd900 bmdma 0xd888 irq 20
1.417172] ata5: SATA link down (SStatus 0 SControl 300)
1.560059] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
1.566979] ata3.00: ATA-8: SAMSUNG HD502HJ, 1AJ10001, max UDMA/133
1.566983] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
1.573620] ata3.00: configured for UDMA/133
1.573817] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
1.586714] Refined TSC clocksource calibration: 2109.721 MHz.
1.586720] Switching to clocksource tsc
2.040045] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
2.046813] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX00, max UDMA/100
2.060169] ata4.00: configured for UDMA/100
2.068605] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS70 EX00 PQ: 0 ANSI: 5
2.390479] ata6: SATA link down (SStatus 0 SControl 300)
2.397239] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
2.397316] sd 2:0:0:0: [sda] Write Protect is off
2.397338] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
2.413212] sda: sda1 sda2 sda3 sda4
2.413653] sd 2:0:0:0: [sda] Attached SCSI disk
2.423220] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
2.423226] cdrom: Uniform CD-ROM driver Revision: 3.20
2.818552] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
2.818556] EXT4-fs (sda3): write access will be enabled during recovery
2.844947] EXT4-fs (sda3): recovery complete
2.845244] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
4.125862] udevd[177]: starting version 181
5.513480] EXT4-fs (sda3): re-mounted. Opts: (null)
5.619429] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
ntpd[546]: ntpd [email protected] Thu Mar 1 21:32:56 UTC 2012 (1)
ntpd[547]: proto: precision = 0.115 usec
ntpd[547]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
ntpd[547]: Listen and drop on 1 v6wildcard :: UDP 123
ntpd[547]: Listen normally on 2 lo 127.0.0.1 UDP 123
ntpd[547]: Listen normally on 3 lo ::1 UDP 123
ntpd[547]: peers refreshed
ntpd[547]: Listening on routing socket on fd #20 for interface updates
9.760264] mtrr: base(0xdd000000) is not aligned on a size(0xe00000) boundary
dbus[419]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
0.000000] BIOS-provided physical RAM map:
0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
0.000000] NX (Execute Disable) protection: active
0.000000] DMI present.
0.000000] No AGP bridge found
0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
0.000000] last_pfn = 0xbffc0 max_arch_pfn = 0x400000000
0.000000] found SMP MP-table at [ffff8800000ff780] ff780
0.000000] Using GB pages for direct mapping
0.000000] init_memory_mapping: 0000000000000000-00000000bffc0000
0.000000] init_memory_mapping: 0000000100000000-0000000140000000
0.000000] RAMDISK: 37d6c000 - 37ff0000
0.000000] ACPI: RSDP 00000000000fa1f0 00014 (v00 ACPIAM)
0.000000] ACPI: RSDT 00000000bffc0000 00038 (v01 021709 RSDT1317 20090217 MSFT 00000097)
0.000000] ACPI: FACP 00000000bffc0200 00084 (v01 021709 FACP1317 20090217 MSFT 00000097)
0.000000] ACPI: DSDT 00000000bffc04a0 04880 (v01 1ADKR 1ADKR017 00000017 INTL 20051117)
0.000000] ACPI: FACS 00000000bffce000 00040
0.000000] ACPI: APIC 00000000bffc0390 00080 (v01 021709 APIC1317 20090217 MSFT 00000097)
0.000000] ACPI: MCFG 00000000bffc0410 0003C (v01 021709 OEMMCFG 20090217 MSFT 00000097)
0.000000] ACPI: WDRT 00000000bffc0450 00047 (v01 021709 NV-WDRT 20090217 MSFT 00000097)
0.000000] ACPI: OEMB 00000000bffce040 00071 (v01 021709 OEMB1317 20090217 MSFT 00000097)
0.000000] Scanning NUMA topology in Northbridge 24
0.000000] No NUMA configuration found
0.000000] Faking a node at 0000000000000000-0000000140000000
0.000000] Initmem setup node 0 0000000000000000-0000000140000000
0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
0.000000] Zone PFN ranges:
0.000000] DMA 0x00000010 -> 0x00001000
0.000000] DMA32 0x00001000 -> 0x00100000
0.000000] Normal 0x00100000 -> 0x00140000
0.000000] Movable zone start PFN for each node
0.000000] early_node_map[3] active PFN ranges
0.000000] 0: 0x00000010 -> 0x0000009f
0.000000] 0: 0x00000100 -> 0x000bffc0
0.000000] 0: 0x00100000 -> 0x00140000
0.000000] Nvidia board detected. Ignoring ACPI timer override.
0.000000] If you got timer trouble try acpi_use_timer_override
0.000000] ACPI: PM-Timer IO Port: 0x4008
0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
0.000000] IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
0.000000] PM: Registered nosave memory: 00000000bffc0000 - 00000000bffce000
0.000000] PM: Registered nosave memory: 00000000bffce000 - 00000000bfff0000
0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfffe000
0.000000] PM: Registered nosave memory: 00000000bfffe000 - 00000000fec00000
0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000

Can the iPad work with a wireless keyboard and mouse?

Would like to know if the new iPad will work with a wireless keyboard and mouse!

There are quite a few threads requesting this facility, so I thought I would choose this recently active (at the time of writing) post to reply to, in the hope some thinking appleite with influence stumbles upon it.
I totally get Apples philosophy of not polluting their interface design concepts with the introduction of a clunky so-last-year cursor; I actually agree. What I can't understand so much is that there are a number of apps that could benefit from mouse support. The one I need is RDP. This class of apps allow us to connect to servers running other operating systems using the IPad; why not authorise CERTAIN APPS to access the Bluetooth mouse stack, and let us have joy. It doesn't affect the iPad experience in the slightest, at least not to it's detriment.
The new retina screen is such that I actually prefer the experience of using my iPad to connect to the server than my laptop!, but given I develop software, there is no way my stubby finger can compete the clinical accuracy of a mouse when using intricate interfaces such as MSDE. With just that one addition, I would practically move into the post pc era you tout so much, at least in my interfacing With the post pc pc,s :).
Thanks
Paul

Locking keyboard and mouse with screen still visible?

Kids are nice but can be a real bugger near computers.
*Does anyone know of a way to lock the keyboard and mouse but with the screen still visible?*
I'm using my MacPowerbookPro to play music at home and would like to see whats playing without my kids changing tracks, applications and god knows what more.
It feels like this is a funcion that should be included in the system but I have googled the topic without success.
Anyone?
Apple?
/partho

partho wrote:
Kids are nice but can be a real bugger near computers.
*Does anyone know of a way to lock the keyboard and mouse but with the screen still visible?*
I'm using my MacPowerbookPro to play music at home and would like to see whats playing without my kids changing tracks, applications and god knows what more.
It feels like this is a funcion that should be included in the system but I have googled the topic without success.
Anyone?
Apple?
/partho
In Keyboard & Mouse, under Keyboard Shortcuts there is a listing for "Turn full keyboard access on or off" but it doesn't seem to do anything on my computer.
A quick search turned this up
http://mac.softpedia.com/get/Utilities/Victor.shtml
Message was edited by: nerowolfe

Keyboard and Mouse pad don't work.

Can anyone help me? I figured I should come here before bringing it to a shop.
I have upgarded my ram from 2gigs to 4gigs with Crucial ram.
Though regardless if I have the new ram or old ram in, my keyboard and mouse pad don't work. There were occasions before when the keyboard would lock up for a short while, but I have no idea what's causing this.
My only thought would be that sometimes my computer would get unusually hot, but i just turn it off when that happens.
Everything else works fine, the USB ports work with keyboards and mouse's, the power chord works fine, there seems nothing wrong with the battery or display.
Thanks you for any help.

Welcome to Apple Discussions!
Has your keyboard and mouse quit working altogether or just when the computer is hot? And do I understand that an external keyboard and mouse will work with no problems?
And I am wondering about your computer running unusually hot. Are your fans operating properly? You might want to run the extended version of the Apple Hardware test to be sure that the fans and thermal sensors are working properly. If they are not, you will get one or more error codes.
Another thing to do to check when your Mac is unusually hot is the Activity Monitor. Select "All Processes" at the top right and check for any process running that should not be which is using lots of CPU.
I don't know if the keyboard problem is related to the heat problem or not, but I would want to know what is causing the heat problem too. Over time, excessive heat can cause damage to the logic board. It could also conceivably damage the ribbon cable which connects the keyboard and I would guess that the trackpad could also be affected. So it is important to see what is going on here. If you have been experiencing excessive heat on a regular basis, this might be the underlying cause of your keyboard and trackpad problems. If so, the heat problem will have to be fixed or the other problem will recur over time.
Try the AHT and post back with any results. Also, use iStatPro to check on your fans and make sure both are running at roughly equal speeds and that they run faster when the computer gets hot.
Good luck!

Help! My Keyboard and mouse will not work all of a sudden on my G4

I am having a problem with both my keyboard and mouse. I have a graphite G4 and recently had to run disk warrior on i. I have had endless problems with this computer and even have a 2nd hardrive on it since it only came with a 10Gig. Needless to say it is all I have right now. I am running os x 10.2.2 on it and a few days after I recessitated it with disk warrior my keyboard and mouse suddenly went dead while I was on the internet. I tried pluging the two into different usb ports both on the tower and also into the flat panel mac display that it came with and nothing. I plugged in my wacom tablet and that works. i then tested the mouse and keyboard on my husband's dell laptop and they work. I cannot reset the PRAM b/c the keyboard won't work! What do I do??????

Besides removing the battery, you can do a PMU reset which will zap PRAM. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
You only describe your Mac as a G4 graphite, which I believe is a G4 AGP. Here’s a diagram showing the location of the PMU reset button.
G4 AGP Graphics (Sawtooth)/Gigabit Ethernet
http://img96.imageshack.us/img96/5706/sawtoothlogicbd2yu.jpg
Look at these links to determine which model G4 you have.
Power Mac G4: How to Differentiate Between Models
http://docs.info.apple.com/article.html?artnum=58418
Power Mac G4: How to Differentiate Between Models (Part 2)
http://docs.info.apple.com/article.html?artnum=42739
 Cheers, Tom
Also look at this link.
Common fixes for USB device issues (unrecognized, etc.)
http://www.macfixit.com/article.php?story=20070824012114701
Message was edited by: Texas Mac Man

Using Photoshop CC 2014 on a Windows Tablet without a keyboard and mouse

Using Photoshop CC 2014 on a Windows Tablet without a keyboard and mouse can be quite a challenge. Even if you use the experimental 2x UI. You can not use your fingers or to quickly change tools and change settings. You have no shortcut without popping up Windows touch keyboard or leave it up taking a great deal of screen space. If you're using the 2x UI Photoshop uses the screen at half resolution so it displays 1/4 the amount of pixels it could.
Fortunately I found a little touchkey utility on the web the lets you design your own touch keyboards. The can be transparent and you can even paint under them as long as you start the stroke outside the keyboard area. The keyboards can be toggles on and off so you can actually use Photoshop. The utility is small and requires not installation can be run form anywhere. I purchased a Surface Pro 3 a week ago. Its a full fledge PC. Through the home group I can access all machines in my house and using network shares I can access all files on my machines and the network drive on my router, I can print on my Epson 4800 printer. I can show slideshow on my HDTV via Bluetooth using a Microsoft wireless display adapter. I can plug in my Wacom Intuos Pro wireless receiver into the USB 3 port and use my Wacom tablet. Have a very touchy machine. Touch on the keyboard touch pad touch on the Display display and on the Wacom tablet. Could have touch on a mouse but I prefer the Microsoft comfort bluetooth mouse that has six buttons and a four way wheel.
As a tablet its under two pounds. Its quite impressive cost why mor the an iPad but worth the cost to me for with windows I can get at the file system. If you have a Surface Pro 3 you should check out "Touchkey" its handy.

Do a screen screen capture and post it here so we can see what you stating about a white layout...

870A Fuzion Power has problem with keyboard and mouse movement only in games.

Hey guys,
recently built a new system and chose to go with the 870A Fuzion Power mainboard, everything has gone very smoothly execpt for one problem, only when I play games like Crysis 2 ect the mouse seems to jolt around now and again and the keyboard decides to stop responding if I hold down the movement keys, and this is only in game not surfing the web for example. Now, I am using a wireless mouse and keyboard but I plugged in a PS/2 keyboard and the exact same thing happened. I've installed all of the drivers that came with this board and the drivers for the mouse and keyboard. Any of you guys ever had this sort of problem or know how to fix this?
Thanks.

I bought a new Macbook pro in june 2010, I didn't have any keyboard or mouse issues prior to upgrading to 10.6.4 supposedly this update was made to fix some issues with keyboard and mouse becoming unresponsive. For me the opposite happened. after the upgrade, my keyboard and mouse (trackpad) becomes sometimes partially unresponsive or totally unresponsive. the only way to solve the problem is by completely turning of the computer and turning back on.. granted it doesn't happen very often.. generally once every about 2-3 weeks but it is still annoying though..
I didn't have a chance to use the computer too much on the previous version (10.6.3) so I don't know if it is software related or hardware related.. any thoughts?
Message was edited by: msoued

Track keyboard and mouse activity?

Similar Messages

Maybe you are looking for