Track locked! Help!!!

I can't get a chunk of a guitar solo unlocked. It says the track is locked but the "protect button" is not engaged. I can hear the sample play when I open it in the "sample editor window" but it is greyed out in the "Arrange window". What can I do?
Message was edited by: TheAndyManCan

Thanks Jaap for the attempted resolution...however as you can see (on the screenshot), that has already been done. The "lock" is open and grey (not closed and highlighted in green)...I already went through that one by myself. It's as if there's a software conflict...because everything I've looked up so far has pointed me to something I've already tried...having read through the user manual. I'm still hoping someone points out something simple I may have overlooked...any of you Apple Pro's out there watching? HELP????!!!!!!!! --Andy

Similar Messages

Mono track locks iPod issue gotten worse?

So I've followed the long-running "mono track locks iPod" problem...you know, the one where a mono track (I think AAC, but I can't remember) is paused, the iPod turns off, and won't turn back on without a reset. Well, I just had it happen...while either at the very end or very beginning of a track that I ripped myself into 192 stereo AAC. I'm not sure of exactly where I paused it; I wasn't looking. I suppose this could be a random occurrence, but has anyone else had this happen when the track wasn't Mono?
General specs: iPod Photo 60; Firmware 1.2 (the one with the busted smart playlists). The tracks in question (if they matter) were tracks 4 and 5 of American Idiot ("Boulevard of Broken Dreams" and "Are We the Waiting"). Any ideas? I tried to recreate it, but no-go.

I am having the same problem. It doesn't matter what podcast I am in. I usuall play a game (Sudoku - downloaded from itunes) while listening and the two of them running at the same time is impossible now. When I am holding it, it also seems as if I am feeling (and I do hear) the HD spinning. I am wondering if there is a bad spot in it. Can you reformat the HD in the ipod? I've done everything else the site suggests!

Logic Control Track Lock

I do not want the Logic control to follow selections in the arrange when I select tracks in Logic. The manual says that if I turn Track Lock on, then track selections in logic will not effect the logic control, but it makes no difference when I turn it on. Is this a bug or am I missing something. I have 3 xts and I want them all to never change fader groups.

But LC does not relate to the Environment audio mixer, it relates to the Track Mixer. If you want your audio mixer in the environment to relate to LC, you''ll have to arrange the objects to match the track mixer.
BTW an easy way to make sure the track order matches the order in your environment is, when you set up the song, select and drag all the audio objects in the environment into the tracklist. (drop them on Track 1)
Generally this is only a good idea at the start, before you have any regions in place in the arrange tracks, as, if you do it when you have content, the audio in the tracks will be assigned to different audio objects to what they were originally. (Although, you can get around this, by cutting all the track content then changing the order, as I described, then doing: 'paste at original position' and select 'keep Inst.' in the dialog which follows.)

Hi. Does using the cover lock help battery life?

Hi. Does using the cover lock help battery life?

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

I uploaded music in the match and when i want to play it in my phone, some of the tracks appear blocked (blanked) and a few not. When I'm connected through a wi fi spot, i can play all of the tracks. Help!

I uploaded music in the match and when i want to play it in my phone, some of the tracks appear blocked (blanked) and a few not. When I'm connected in a wi fi spot, I can play all of the tracks. Help please.

Hi,
You need a wifi connection to stream. Previously played tracks appear in a temporary cache which allows them to be played again when yOu have no wifi..
You can either predownload selected tracks or use cellular data.
Jim

HT2375 I'm getting a "no input selected " mssg when i try to record a vocal track plz help

I'm getting a "no input selected " mssg when i try to record a vocal track plz help....

HEY MODS... who is posting the support article number in the header...
The one posted in this topic is evem more unhelpful than some of my curt replies.
Bad idea, most of Logic's problems are not covered by support articles.

Buy a iphone 5s but I stole it yesterday and wanted to know if you can track please help me, buy a iphone 5s but I stole it yesterday and wanted to know if you can track please help me

buy a iphone 5s but I stole it yesterday and wanted to know if you can track please help me, buy a iphone 5s but I stole it yesterday and wanted to know if you can track please help me

Ok.
Did you ever have possession of this phone?
Or did you get lost in the mail?
You're not answering the question I'm asking, so it's really hard to help you.
As already stated by Chris and I you can only track your phone if you had findmyiphone enabled in icloud settings.
Then you can log into icloud.com and use the find my iphone app.
Since you said you don't have internet, then you can't track it.

Our students have entered passcodes when downloading ios 7 update and now ipads are locked, help!

Our students have entered passcodes when downloading ios 7 update and now ipads are locked, help!

If the iPad is running iOS 7 and the kid set up Find My IPad, then you can't restore it without the kid's Apple ID and password. The Activation Lock is a feature that people whined and whined to get, and is causing exactly the sort of problems many of us predicted when people were clamoring for it. If you can't get the kid's Apple ID, you'll have to call Apple Support and ask if they have any sort of workaround. My guess is that they'll have to replace the iPad, but they may have a solution they don't talk about publicly.
This won't help for iPads currently locked for which you can't get the Apple ID, but if before you give out iPads to your students you go into the Restrictions and disallow changes to the accounts, they can't then turn in Find My iPad. Or you can set up Find My iPad yourselves to your own accounts and then lock the Restrictions so they can't set iCloud up to an account to which you don't have the Apple ID.
Regards.

With track locking why does it take longer to --

1.) With track locking, why does it say so much longer to "Save As" and to create bakcup copies of songs?
2.) If after I lock tracks to improve performance can I unlock them for the purpose of faster "Save As" and copies?

I found from my experience that if one deletes the freeze files to save space but does not unlock the tracks GB will not search for the files upon opening but rather will recreate the locked tracks after you click "Play".
I just wanted to clarify that. I didn't want anyone to think GB will open a tune and then begin a search right away. It won't happen until you click play.
Heres my reasoning for leaving the tracks locked and deleting the freeze tracks and not unlocking them before hand.
If I leave the tracks locked and then delete the files I don't have to remember later which tracks I wanted locked and which ones I did not want locked. All I need to do is open the file and click play. Its actually more convenient. If you unlock the tracks first then delete the files you have to go back later and relock the ones you wanted. TO me thats a much easier way to remember things.
I agree with you whole heartily when it comes to "Save As Archive". Its the only way to save.
"Save" And "Save As" only creates a pointer to your files in and from the "Project Data" file. They do not add AIFF files taken from GB browser to the "Media" folder. Only a recorded instrument (vocal or instrument) or a file dropped into time line are saved in the media folder using "Save" or "Save As". Or in other words anything from "Outside" the GB browser.
MIDI instruments recorded into GB are not kept in the Media folder after a "Save" or Save As" or unfortunately "Save As Archive".
"Save as Archive" saves all the files you currently have in the GB timeline (except MIDI data) in the Media Folder. A nice, safe, sure way to know all your intended files will be there when you open your tune or burn it to a disc and return it in the future. This is why I always use it. It does of course make you .band file much larger.
Recently I have tested the .band files for operator usefulness and error to try to alleviate the somewhat unfounded fears placed upon opening the file with the "Show Package Contents" function.
Sure thing can go wrong if your careless when you open the .band file but its not as is clicking any of the audio file will hurt anything.
You can play many of these files saved under "Save as Archive" with the finder.
I have found that if you ACCIDENTLY toss out any AIFF files that were taken from the GB browser and placed into the timeline that this will not hinder your .band file from opening. GB will still open and play your file as it normally would and when you "Save As Archive " again those browser files will be replaced in the media folder. Even if you have looped them, cut them, shortened them.
If you ACCIDENTLY toss out a file added to the timeline or a recorded instrument or vocal then your in trouble because it is gone but the GB file will still open. GB will tell you it can't find the file and ask if you want to search for it.
Now if you Toss out your "Project FIle" then your screwed. The .band file will not open and the game is over.
Why do I even mention all this? Not to annoy anyone or go to battle over the subject but simply to mention that I have tested every scenario and that opening the .band file and clicking around will not harm a thing. Clicking around will not harm anything or damage your file. Just leave the "Project Data" file alone.

NWDI - Track locked for editing in another session

While editing Track Data in the CMS Landscape Configurator my browser session died unexpectedly. I logged back in, but now when I try to enter Change mode on the Track Data tab, I get a message saying the "Track is locked for editing by (me) in another session". How do I unlock the track? I have searched Help documents, SAP Notes, and this forum but have not found any details.
Version is NetWeaver 2004s SP13
Edited by: Ray Erdelyan on Jan 14, 2008 8:08 PM
A co-worker helped me figure it out. We went to the visual administrator and killed the session. That released the lock.
Edited by: Ray Erdelyan on Jan 14, 2008 8:35 PM

Hi,
Usually the browser session will get unlocked on its own after some particular time. Incase this is not so in your case, a restart of the CMS server might help.
Akshatha

Rating tracks locks up

If I double click select on my iPod and rate a track it seems to lock up in ratings mode. I can rate one track but then any other track I visit, I'm locked into ratings mode and using the wheel does nothing. I just see blank stars. Do I need to press something to get out of rating mode? Does anyone know. Thought it was a crash and reset, but it still happens. Can anyone please help?

Check this article and see if it helps: iPod stuck on artwork or rating screen

Cannot install lion. "The Disk is Locked" help please!

I was hoping someone could help me. I just downloaded the Mac OS X Lion and when trying to install, it says there is an error with the disk and that it is locked and cannot install. Does someone know how I can fix this? Now I am also worried that I have lost my files. PLEASE HELP! Thank you!

Try to Repair it, per #6 in Using Disk Utility.
If it's still locked, this might help: https://discussions.apple.com/message/11044944?messageID=11044944#11044944?messa geID=11044944

Audio tracks: lock vs disconnect?

Hi, all. I'm new to iMac and FCE Express. I'm not sure I understand the functional difference between locking the audio tracks versus disconnecting them. Don't both functions do the same thing?
Thanks,
Jeff

Yes, I guess I'm referring to the patch panel.
So you're saying that if I UNpatch, say, an audio track, and I have a clip in the Viewer that has both video AND audio, moving it to the timeline with the UNpatched audio track will move the video portion only, and not the new clip's audio?
I'm sorry, I don't mean to be an idiot about all this. I think I understand the concept of LOCKING and UNLOCKING the tracks in the timeline. I'm just not getting the whole thing of PATCHING and UNPATCHING tracks, and when patching and unpatching is to be used instead of locking and unlocking. It's a mental block of some sort??
Thanks,
Jeff
Message was edited by: jla930

Inventory tracking spreadsheet help.

I'm hoping to create a file that tracks all my inventory. Sheet A lists all my stock with inventory codes to correcsponding stock types. I would like to create a formula that copies the inventory from sheet A to sheet B, C, D , E and F dependinfg on the inventory code in sheet A.
ie. If inventory code is 2001- then copy that stock into sheet B. If inventory code is 2002- then copy stock into sheet C... etc etc
Can anyone help? I've tried every formula I can think of!
THanks in advance!
Becky
See following screen shots...
Sheet List
Key
Sheet A
Sheet B

Hi Becky,
Here's one way to go about it.
The image below is a recreation of your Main data table, renamed "Main". T cut down on typing, I shortened the item names, and omitted the Notes (none of these would be transferred to the In Stock table.)
The actual table continued to the last fully visible row of the image in your initial post.
The new column on the right uses COUNTIF to greate an index of rows with each Inventory code. This is a 'working column,' and may be hidden.
Formula:
H2: =E2&"-"&COUNTIF($E$2:E2,E2)
Fill down to the end of the table.
The satellite tables are all identical except for name and the values in cells A1 (inventory code for items to be collected by this table) and B2 (Name of this table). Note that this table has two header rows to provide space for the Inventory Code and name in the top row.
The table contains a single formula, with one edit required to skip the column on Main containing the inventory codes.
Formula:
A3: =IFERROR(OFFSET(Main :: $A$1,MATCH($A$1&"-"&ROW()-1,Main :: $H,0)-1,COLUMN()),"")
Enter the formula in A3, then fill it right to D3, where it will pick up the inventory code (2001) from E2 of Main).
Edit the formula to insert "+1" after COLUMN()
D3: =IFERROR(OFFSET(Main :: $A$1,MATCH($A$1&"-"&ROW()-1,Main :: $H,0)-1,COLUMN()+1),"")
Fill right to E3.
Select cells A3 to E3, then use the fill handle to fill down to the end of the table.
Because the formula will return a zero for empty cells (such as those in the Date Sold and Notes columns, I used conditional formatting to hide these zeros (in Date sold) or to make them less visible (Notes). The rules are identical except for the colour (white or grey) set conditionally for text in the cells. The image shows the rule for all cells in Column E (Notes).
Duplicate this table for sheets C, D, E and F, then edit the table's name to match its function and replace the inventory code in A1 and name in B1 with those approprate to each table. I would develope the tables on the same sheet as the Main table, then, when completed, move each to its own sheet.
Regards,
Barry

CAF Entity locking HELP

hello
I am doing some tests in WebDynpro and CAF Core services.
I have a piece of code as below that retrieves an entity from CAF Core for update. I need this entity to be locked during the update but the two methods lock() and unlock() do nothing. I can still access for update the same entity instance from another user.
This probably works if the transaction is happening within CAF service but I also need to lock entities from webdynpro when doing complex updates. In other words I am not willing to create a custom method in CAF service for each update I need to implement in webdynpro.
Any advice ? How are we supposed to use the class com.sap.tc.col.client.generic.api.LockStrategy ? I did not find much about this api.
Thanks in advance
Vitaliano
public void UpdateKAMInTransaction( )
    //@@begin UpdateKAMInTransaction()
     IServiceFacade serviceFacade = CAFServiceFactory.getServiceFacade(cplxmdlDefinition.class);
    String guid = wdContext.currentAKamElement().getGuid();
     AKam akam = MyAppProxy.readKam(guid);
     //locking is not working at all. concurrent changes are lost
     akam.lock(LockStrategy.EXCLUSIVE);
     //update a value here
     akam.setVersion(akam.getVersion() + 1);
     akam.getAspect().sendChanges();
     serviceFacade.save();
     //locking is not working at all. concurrent changes are lost
     akam.unlock();
     wdThis.wdGetAPI().getMessageManager().reportSuccess("done update AKAM=" + akam);
    //@@end

Now I feel lost. Please keep helping a newby.
I have implemented my custom method in CAF Services. Here I lock the entity, make all my chanegs, then update and return. I call this custom CAF Application Service method from WebDynpro.
Nevertheless I noticed that concurrency can still happen. If more than one user updates the same entity at the same time, and exception is thrown in the log files but no exception is thrown. I.e. I cannot intercept the collision.
in the log file a huge stacktrace is written, while the most interesting message is "javax.jdo.JDOUserException: optimistic transaction failed".
So... what am I doing wrong here? Should'nt new locking just hold until the existing one is released?
HELP!
Vitaliano
     public java.lang.String myUpdateKam(java.lang.String guid, long newVersion) throws com.sap.caf.rt.exception.ServiceException
          // logging
          java.lang.String CAF_user = sessionContext.getCallerPrincipal().getName();
          java.lang.String CAF_methodHeader = MyAppBean.JARM_REQUEST + ":" + "myUpdateKam(java.lang.String, long)";
          Object[] CAF_parameters = new Object[] { guid, new java.lang.Long(newVersion)};
          com.sap.caf.rt.util.CAFPublicLogger.entering(CAF_user, MyAppBean.JARM_REQUEST, CAF_methodHeader, MyAppBean.location, CAF_parameters);
          java.lang.String retValue;
          try
               //@@custom code start - myUpdateKam(java.lang.String, long)
               //Read the BO and prepare for changes
               retValue = "";
               Kam kam = getKamService().read(guid);
               char modeLock = IBusinessEntityService.MODE_WRITE;
               try
                    //Lock BO before updating
                    try
                         getKamService().lock(kam.getKey(), modeLock, 3000);
                         retValue += "-lock-";
                    catch (CAFLockException e)
                         retValue += e.getMessage();
                    //Now do the update and commit
                    // =====> NOTE: regardelss if there is another update in progress,
                    // a concurrent update still gets down to here. WHY ?
                    long counter = kam.getVersion();
                    kam.setVersion(++counter);
                    getKamService().update(kam);
                    retValue += "-update-";
               catch (CAFUpdateException e)
                    //This case is when concurrent update occurs
                    retValue += e.getMessage();
               catch (Exception e)
                    //any other exception thrown?
                    retValue += e.getMessage();
               finally
                    //Make sure we always leave our BO unlocked
                    try
                         getKamService().unlock(kam.getKey(), modeLock);
                         retValue += "-unlock-";
                    catch (CAFLockException e)
                         retValue += e.getMessage();
               //@@custom code end - myUpdateKam(java.lang.String, long)
               return retValue;
          finally
               com.sap.caf.rt.util.CAFPublicLogger.exiting(CAF_user, MyAppBean.JARM_REQUEST, CAF_methodHeader, MyAppBean.location, CAF_parameters);
This is the code in WebDynpro to invoke CAF custom method.
public void UpdateKAMRemotely( )
    //@@begin UpdateKAMRemotely()
     IServiceFacade serviceFacade = CAFServiceFactory.getServiceFacade(cplxmdlDefinition.class);
     IAspect retValue = null;
     for (int i = 1; i < 101; i++)
          long newLong = wdContext.currentAKamElement().getVersion() +i;
          retValue = MyAppProxy.myUpdateKam(wdContext.currentAKamElement().getGuid(),newLong);
          IAspectRow row = retValue.getAspectRow(0);
          String retMsg = row.getAttributeAsString("value");
          wdThis.wdGetAPI().getMessageManager().reportSuccess("IAspectRow=" + row + "index="+i);
          serviceFacade.save();
    //@@end
Message was edited by:
        Vitaliano Trecca

Track locked! Help!!!

Similar Messages

Maybe you are looking for