Track numbers not appearing in numerical order.

Some tracks in my iTunes music library do not appear in numerical order since the iOS 7 update, does anyone else have he same issue with their library, have re-enabled iTunes Match, this corrected the fault temporarily but re-appeared after deleting some tracks.

I did have this issue myself John and in the end I reset my iPad to factory settings and copied music over from iTunes to my iPad and it all now appears in order as it should - this issue only came about following an iCloud restore after I wanted to test some things bugging me after installing iOS 7 on my iPad.
This is obviously a big step, but if you've got your music library in iTunes it shouldn't take too long to complete and will leave you with the desired result.
Also, if you connect your iPad in its current state to iTunes you may have a similar issue that I experienced when I did a previous backup from iCloud: https://discussions.apple.com/thread/4874274 I've come to the conclusion that while brilliant for backing up most things iCloud seems to be very poor at the 'restore' process for music.
Regards,
Steve

Similar Messages

  • Music does not appear in correct order on ipod

    ok, i have found 2 of my albums do not appear in correct order on my ipod, but they do in itunes. They are numbered correctly, named to the same album, everything is right. They are just in mixed order when i choose the album on my ipod.
    i have a 5g 80 gig.
    i've tried deleting the music, copying it back on, still happens.
    any help?
    edit* am i the only one that has to constantly open the browser in itunes for my ipod everytime i plug it in? the browser stays open in the library but not my ipod, that didnt happen back in 6. Its a small problem but REALLY annoying.

    bump

  • HT2905 When I sync recently bought albums to my iPhone I get duplicated tracks.  How can I resolve this.  The duplicated tracks do not appear in my itunes library, just on my iPhone.

    When I sync recently bought albums to my iPhone I get duplicated tracks.  How can I resolve this.  The duplicated tracks do not appear in my itunes library, just on my iPhone.

    It seems to happen with songs that were purchased before synchronizing the new iPhone
    I will tell you how I fixed it.
    Note: I have iTunes in spanish so I will try to translate and figure out the commands that appear on ITunes in english. I will put my translations into brackets. English is not my native language. I will do my best.
    The workaround is:
    1.- Dragg no working songs from iTunes to a folder on the hard disk. (Only for backup purposes)
    2.- Deleted those songs from iTunes library.
    3.- On the left panel in ITunes click on "Purchased" under the STORE option. All your purchased songs will appear on the right panel
    4.- At the bottom and right there is the option : "Download Previous Purchases". Click there.
    5.- Click on the option "Are not in my Library" (top right)
    6.- The songs you deleted from iTunes will appear.
    7.- Downloaded them again. (You have the option to download at the bottom right)
    8.- Syncronize your iPhone and that's all.

  • Freed Goods not appearing in Returns Order

    Hi Friends,
    We are trying to configure the Free Goods scenario in our system. The free goods have been successfully configured for outbound sales orders. However, in case of returns, when we create a return order, the free good does not appear on the order.
    How can we configure the returns orders for free goods.
    Regards,
    Abhishek

    Hi,
    Please also check whether you have done item category determinaiton for that Return order..
    Retun order type + Item catergory group + Usage + Higher level item category + item category..
    And also have a look into free goods record in VBN1 tcode..
    Let us know how come your are creating return order without any reference. Please explain the senario..
    regards
    sankar
    Edited by: sankar sankar on Jul 9, 2008 12:54 PM

  • Items not appearing in alphabetical order

    Hi folks,
    When a user here clicks on File - Open, her items do not appear in alphabetical order.  She has to right click - Arrange By - Name.
    However its in alphabetical order on mine.
    Any idea how I can set hers to alphabetical order all the time?
    Many thanks,
    G

    In the File open dialog box you can change the order the files are listed. I frequently use Date Modified so I can see the ones I most often use at the top. You change the order the files are listed the same way you do in Finder (on a Mac) and in Windows Explorer on a PC.

  • Target cost not appearing in process order

    Hi All,
    Please let me know the reasons for target cost not appearing in process order.
    Thanks,
    SAP PQ

    Two more scenarios:
    1. You have co-product.
    2. You reverse the variance calculation.
    It will show the target cost only after you run variance calculation.

  • TS4083 My mailboxes do not appear in alphabetical order in the mailbox view pane in Mac Mail??

    My mailbox list in the mailbox view pane does not appear in alphabetical order. (Mac Mail iCloud account). This is on my iMac running Lion 10.7.4. Interesting though, the mailboxes are alphabetically sorted in my laptop and iPhone which are both also synced to my apple account. I'm baffled???

    Hi Graham,
    Getting the alphabetical sort of your songs is easy. If you upgraded to the new iTunes all you would do is view your music and go to the List view. That option is on the right hand side underneath the search bar. Once you have change to that view, just click on the Name view to organize by name. 
    Using the new iTunes
    https://support.apple.com/en-us/HT203128
    Take it easy,
    -Norm G. 

  • Album uploaded to my Photoshop web site does not appear in album order

    Album uploaded to my Photoshop web site does not appear in album order, although after it is configured
    through the sharing function, it is in the correct order.

    Do matters improve if you update to iPhoto 9.4.1?
    iPhoto 9.4.1
    From the release notes for the new version:
    What's New in Version 9.4.1
    Improves the reliability of syncing to iOS devices via iTunes 
    Fixes an issue that could cause iPhoto to quit unexpectedly when using the Export command 
    Addresses an issue that could cause iPhoto to quit unexpectedly when upgrading multiple books, cards, and calendars 
    Resolves an issue with downloading and viewing photos synced from Facebook albums

  • When I create a new mailbox, it does not appear in alphabetial order.  It appears at the bottom and I have to manipulate it to get it in its proper place.  This apparently started when I upgraded to Mountain Lion.  Any ideas?

    Do you know why new mailboxes I create do not appear in alphabetical order?  They appear below all other mailboxes and I have to manipulate them into their proper place.  This apparently started when I upgraded to Mountain Lion.  Any help would be much appreciated, as it's annoying and time consuming.

    Do you know why new mailboxes I create do not appear in alphabetical order?  They appear below all other mailboxes and I have to manipulate them into their proper place.  This apparently started when I upgraded to Mountain Lion.  Any help would be much appreciated, as it's annoying and time consuming.

  • Attributes of an employee is not appearing in alphabetical Order

    HI BI Expert,
    For the BI 7.0 Template, when selecting attribute of an employee,
    1. For Attributes of an employee is not appearing in alphabetical Order,where in 3.5 version they did. Is there anyway to change the order?
    2. Increase the number of attribute on a page, as the page needs to
    refresh each time you scroll down. Like a full list that does not scroll down
    like in 3.5 version. Its very time consuming and not friendly. Is there a
    way to not have the screen flicker but have the attributes scrolled or it display a full list that does not scroll down?
    Thanks.
    Best regards,
    Pei Fung

    Mani,
    Thanks for your reply.
    I run the report from BEx Java Web but I couldn't find the option "Width of list" in the report. Could you advice?
    Below forum is similar to my question but there is no answer for this forum.
    How to re-arrange or hide display attributes?
    Thanks.
    Best regards,
    Pei Fung

  • HT201272 Downloaded a track does not appear in my iTunes library or iTunes Computer folder (Windows XP)

    A downloaded track does not appear anywhere in my computer, but I can't download it again as my iTunes purchased list states it's already downloaded!  I haven't had this problem before so any ideas please.  Thanks

    I also have additional issues with this same issue. The songs appear on my iPhone and iPads via iTunes Match, but I do not see them in my iTunes before I manually update the match. iTunes downloads them somewhere as I have automatically download new songs feature activated, but they do not show up in my library. After updating the Match, I am able to manually download them from the cloud.

  • Formula bar does not appear in Numers on iPad

    Formula bar does not appear in numbers in iPad 1. Tapping twice only numerical keys appear. Search net and could not find solution. Deleted and then downloaded numbers to no avail. Works fine on iPhone.

    when you double tap, you will first see the numerical keys, now look to the left of where the numbers show up, above teh numeric keypad. There are four "buttons". the number 42 is highlighted, this indicates numeric entry. the others are a clock (for date/time entry), the capital Letter T (for text entry) and an equal sign (for formula/equation entry). Tap the appropriate one to get the data entry type you require. If in formulas, you will see the four buttons collapse down to "...". to save space. just tap that button to return to the four.
    This information is available online from apples Numbers support web site, or through the Help menu under the wrench icon:
    http://help.apple.com/numbers/ipad/1.5/#tan72717cf6
    Jason

  • Page Numbers Not Appearing in Data Merge Document?

    Hello, hopefully someone can help. I am pretty new to InDesign but learning a lot.  I am creating a member directory of about 200 pages (about 2800 records merged from .csv to InDesign 6). Everything is working fine with the merge, except generating the page numbers.  I tried adding page number at the bottom of the page to the master BEFORE merging. But if I do that, it greys out the "multiple records per page" option when trying to perform the Data Merge (using "Create merged Document").  So, I tried adding the page number to the A-master AFTER creating the merged document, but the page number is not appearing on any of the pages.  There must be a way to do this, can anyone help?
    (FYI - to generate the auto page numbers, I am going to the Type-Insert Special Character-Markers-Current Page Number, and placing that within a text field at the bottom of the page.  Thanks in advance. )

    Here is a screen shot.  I have placed it on the A-Master.  See Screenshot#1.  Screenshot #2 shows Page 70 with no page number (and no other pages have page numbers that I can see.  Thanks for your advice on fixing....
    Sorry, here is screenshot #2, (with personal details redacted but the records are there behind the grey boxes):

  • Condion Type "VPRS" should not appear in Sales Order, Inquiry, Contract

    Hi Gurus,
    Normally when you create Sales Order/Inquiry/Contract,  in the Condition Tab VPRS Condition Type will appear and show the cost price of Materail from the Material Master.
    My Client requirement is, VPRS Condition type has to be calculated as "Statistical" Contion but IT SHOULD NOT APPEAR IN THE CONDITIONS TAB IN THE SALES ORDER/INQUIRY/CONTRACT.
    Thanks,
    Bala

    hello, friend.
    try sapnote 105621.  this is about restricting view of condition types (i.e. vprs) in sales orders by creating anauthorization object for cond types..
    i wish to discuss our experience with this, as we had the same business requirement.
    first, we simply deleted vprs from the PP.  this did not affect financial accounting, until the client decided to implement std cost estimates.  we had to bring back vprs.
    now, we did the sapnote, which required joint efforts among SD, ABAP and BASIS.  although we were able to restrict view of vprs in the cond tabs at itm level, this was still visible at header level.  also, a resourceful data encoder can always find ways to view the same in, for example, the document flow or materials movement data.
    however, try this and maybe you will get it right.
    regards.

  • Discount condition type not appearing in sales order but in invoice

    Hi,
    I have two discount condition types (MPDI,ZSDI) in my pricing procedure,at the time of sales order creation one discount condition is not appearing.
    On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
    In the billing ,i could see the condition type appearing.I have checked this,but i could not understand why it is happening.Even the condition catergory of condition is empty not L.
    Also please find the screen shots below,
    Pradeep

    Pradeep,
    Am sure user might have deleted the condition type in sales order, the same condition type woudl have entered manually in invoice.
    Please check my testing, i have done the same entered ZA09 manually and after saving have deleted again in sales order, after dilivery and when i created invoice here i have entered manually the same condition type.
    So in your case also the same thing could have happend, check the change log and also in invoce condtion tab check the condtion type in analysis ( Invoice analysis not order). so that you can udnerstand whether it was entered manully or not.
    On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
    This is because in the condtion tyoe the abvoe key combiantion was found with records hence the below key combition was ignored. this you observe in your screen shot with with 5.00
    So my guess is the condtion records was deleted in sales order.
    thanks,
    srinu.

Maybe you are looking for